Are you an experienced Process Safety Engineer looking to make a real impact in a high-hazard environment? We’re working with a leading operator in the Southern North Sea who are looking to strengthen their Process Safety team in Norwich. This is a key role where you’ll take ownership of critical safety studies and directly influence the safe operation of offshore and onshore assets. The Opportunity You’ll be at the forefront of process safety, leading and facilitating major risk assessments and ensuring compliance with industry regulations and best practice. Key responsibilities include: Leading and facilitating studies such as HAZOP, HAZID, LOPA, FERA, and QRA
Supporting SIL determination, SIF design, and SIL verification activities
Providing engineering solutions to close risk gaps and improve asset safety
Supporting Management of Change (MOC), incident investigations, and safety-critical task analysis
Mentoring junior engineers and contributing to a strong safety culture What We’re Looking For TÜV / Functional Safety certification (essential for this role)
MEng in Chemical and/or Process Engineering (or equivalent).
CEng desirable but not essential.
Functional Safety Engineer (FS Eng) certification desirable; relevant experience will also be considered.
Minimum of 8 years’ experience in process and process safety engineering within a major hazard industry (preferably Oil and Gas).
Working knowledge of Safety Case Regulations and/or COMAH.
Operational experience and knowledge of Safe Isolation and Reinstatement of plant highly desirable.
Experienced user of Hysys (or equivalent); Olga experience is highly desirable.
Knowledge of consequence modelling tools, including their limitations. Phast user experience highly desirable but not essential as training will be provided.
BOSIET/FOET, MIST, CA-EBS and Offshore Medical desirable but not essential. What’s on Offer Opportunity to work on high-impact offshore assets
A technically challenging role with real responsibility
Strong team environment with opportunities to mentor and develop others
Ongoing training and professional development Additional Requirements Must have the right to work in the UK abd be able to work in the Norwich Offices Monday-Friday
Willingness to travel offshore and to onshore sites as required If you’re ready to play a key role in protecting people, assets, and the environment this is your opportunity to step into a position where your expertise truly matters. With over 90 years’ combined experience, NES Fircroft (NES) is proud to be the world’s leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients

Job Title: Design Engineer
Location: Coventry, UK
Core Hours: 08:00-16:35 (Mon–Thu) 08:00-15:10 (Fri).
Vacancy Type: Full-time, 4 month Contract and onsite
Salary: £35,000 - £45,000 per annum FTC OR £275 - £350 per day contract (subject to experience) About the role At NP Aerospace, we don’t just design to innovate – we design to protect. We’re looking for x3 immediately available Design Engineers to join our Coventry-based team, developing advanced vehicle protection and integration solutions used across global defence programmes. These temporary roles will work from initial concept through to production designing systems that directly enhance the safety and performance of those who serve on the frontline. In these hands-on role, you’ll be immersed in 3D CAD design, working with complex materials, assemblies and components that must perform in the toughest real-world environments. Contract Options We’re offering two engagement routes, depending on how you want to work: o £35,000 - £45,000 per annum on a Fixed-Term Contract (FTC) with NP Aerospace – including full employee benefits (see below) o £275 - £350 per day if you join as a Ltd Company Contractor (outside IR35) What you’ll get in return At NP Aerospace, we know our success comes from our people. That’s why we invest in benefits that support your health, reward your hard work, and help you grow your career: * Performance rewards – discretionary bonus opportunities * Flex your day – flexible start and finish times (subject to manager approval and operational needs) * Time to recharge – 25 days’ holiday + 8 bank holidays, with the option to buy more through our Holiday Purchase Scheme * Support for Defence – two weeks’ paid leave for Reservists and Cadets, plus paid leave for Cadet Force Adult Volunteers (CFAVs) * Future security – competitive pension scheme (9% combined employer/employee contributions * Peace of mind – life cover at 3x base salary * Health & wellbeing first – BHSF Cash Healthcare Plan to support everyday health costs * Grow with us – career development and advancement opportunities within a global business * Supportive environment – a team culture built on innovation, collaboration, and purpose What you’ll be doing You’ll take ownership of mechanical designs from concept through to low/medium-volume manufacture – producing accurate 3D models and detailed engineering drawings. Working closely with Engineering, Manufacturing and Supply Chain teams, you’ll ensure every design balances weight, cost, performance and durability. You’ll be part of a collaborative, cross-functional team supporting the integration of specialist equipment into armoured vehicles – solving complex challenges and ensuring designs are both functional and field-ready. Day-to-day, you’ll manage your CAD data, BoMs and drawing packs using PLM tools (Windchill preferred) while supporting design reviews, testing and iterative improvements across multiple projects. What we’re looking for * Degree in Mechanical Engineering or equivalent practical experience * Experience within defence, aerospace or automotive engineering * Proficiency in 3D CAD – Creo (9.0 or higher) required; SolidWorks experience highly desirable * Knowledge of fabrication, machining and composite materials * Hands-on, practical problem-solving mindset with a focus on manufacturability and quality * Chartered (CEng) status or working towards it would be an advantage What do we do at NP Aerospace? NP Aerospace is a global leader in armour technology manufacturing and vehicle integration, delivering high-performance, lifesaving solutions for the defence and security industry. Our mission is to improve and protect lives, and our vision is to be a leading provider of innovative solutions that solve our customers’ complex challenges. Our values - Respect, Collaboration, Integrity, and Dedication form the bedrock of our culture. Our extensive range of combat-proven body armour, from ballistic helmets, plates, and shields to bomb disposal suits, highlights some of the most advanced composite materials. With a team of R&D engineers working on next-generation solutions, we also excel in highly engineered vehicle systems and armour platforms used by some of the world’s largest defence organisations. Founded in 1926, NP Aerospace has served the defence industry for over 40 years, evolving into an agile and diverse company. Our Business Development team is expanding both in the UK and North America. Equal Opportunity Employer Statement: NP Aerospace is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We welcome applications from all qualified individuals, regardless of race, colour, national origin, gender, age, religion, disability, sexual orientation, or any other legally protected status. All employment decisions are based on qualifications, merit, and business needs. We are also fully committed to supporting the Defence Community and actively advertise roles on Defence specific platforms such as CTP, Force Families, Forces Employment Charity, and Veterans Job Board. Data Privacy: NP Aerospace respects the privacy of all applicants. Personal information provided during the application process will be treated in accordance with our privacy policy and applicable data protection laws. Please note: If successful, you will be required to sign the Official Secrets Act and successfully pass the necessary checks before you can begin your employment with NP Aerospace

12 Month Contract Rate open to negotiation up to £80 per hour umbrella (Inside IR35) Hybrid Working – 1 – 2 days per week on site (ideally) – can offer more remote working with ad hoc visits where required Job Role: The Senior HVAC Engineer will lead the design, integration, and technical assurance of numerous HVAC systems across a complex marine platform. They will apply deep expertise in system performance, capacity assessment, and optimisation to deliver robust, compliant, and customer focused solutions throughout the shipbuilding lifecycle. The role ensures high engineering standards by driving improvements to processes, supporting technical investigations, and providing evidence-based decision making. Strong HVAC and marine/building services systems experience is essential to ensuring system reliability and capability across the platform. Key Responsibilities: Preparing specifications and developing HVAC system designs in accordance with project requirements, technical standards, and quality expectations. This includes Heat Load Calculations, Psychrometrics, Pressure Drop Calculations and Single Line Diagrams (schematics).
Carry out design appraisals in assigned areas to ensure compliance with all applicable standards and design criteria.
Participating in the development, maintenance, and modification of engineering processes and procedures relating to HVAC distribution systems, ensuring they remain aligned with technical developments, regulatory requirements, and operational needs.
Carrying out specialist technical analyses and investigations, such as noise and pressure loss calculations, ductwork design optimisation, equipment performance assessments, and root‑cause analysis for system faults. Prepare detailed technical reports with recommendations to support problem resolution, system improvement, and enhancement of HVAC capability.
Supporting the Principal Engineer as a specialist point of contact with customers and/or suppliers on HVAC engineering matters. This includes resolving technical issues, coordinating design intent, reviewing supplier data, and maintaining clear communication of priorities, performance requirements and objectives.
Providing guidance, mentoring and technical direction to less‑experienced team members, ensuring effective task delivery while supporting their professional growth and development within engineering.
Knowledge: Experience in engineering or a defence related industry.
Has worked in typically two phases of the product lifecycle in the defence/maritime industry.
Has sufficient experience of the total product lifecycle to enable a good understanding of adjacent phases and through life engineering issues.
Knowledge of processes and tools used in Marine Engineering.
Experience in Supplier Management.
Experience writing technical specifications.
Skills: Microsoft Office Suite / Autocad / Foran.
Experience and expertise, in marine HVAC systems or Building Services HVAC System design.
Experience in the design, build, integration, support and operation of Naval ships (desirable)
Awareness of Life Cycle Management reviews of bids and programmes.
Awareness of external market and similar industry advancements and developments.
Qualifications: Degree qualified in an engineering or other related discipline, would be preferred or relevant experience.
Meet the requirements for registration as Incorporated Engineer with the Engineering Council and be a member of a relevant Professional Body

We are supporting a Battery Energy Storage System project and are seeking an experienced SCADA / Automation Engineer to support commissioning and integration activities on a live, safety-critical site. This is a hands-on engineering role, requiring strong practical experience rather than purely design or office-based SCADA work. Key Responsibilities \* Support SCADA and automation system integration on a BESS site \* Work with PLC systems and industrial communications \* Configure and troubleshoot Modbus (TCP/RTU) \* Support fibre optic communications setup and testing \* Assist with commissioning and site integration activities \* Map SCADA systems to physical site equipment \* Provide both on-site and remote technical support Essential Experience \* Strong SCADA / Automation engineering background \* Hands-on experience with PLC systems \* Solid understanding of Modbus communications \* Experience with fibre optic / industrial networking systems \* Commissioning / installation / site-based experience \* Comfortable working in live operational environments \* Must be hands-on and technically delivery-focused Desirable \* BESS / battery storage / renewables experience \* Exposure to IEC 61850 environments \* HMI / systems integration experience If this role is of interest, please click Apply and attach your updated CV, and I will be in touch to discuss further

Location: North Cornwall
Contract: Fixed Term Contract – until August 2026
Salary: £55,000 per annum (pro rata from start date)
Shift Pattern: 3-on / 3-off (days & nights)
The Role
An exciting opportunity has arisen for a Maintenance Engineer to join a state-of-the-art food manufacturing site in North Cornwall. This is a front-line engineering role within a high-care production environment, supporting critical manufacturing assets and working closely with the Engineering Team Leader.
You’ll play a key role in maintaining and improving equipment across the site, with a particular focus on food production, supplying specialist ingredients to external food manufacturers.
This role is ideal for an engineer who enjoys a hands-on, fast-paced FMCG environment and wants exposure to both preventative and reactive maintenance in a modern facility.
Key Responsibilities * Delivering planned preventative maintenance and responding to reactive engineering issues * Maintaining and fault-finding on equipment including pumps, motors, valves, agitators and instrumentation * Working collaboratively with engineering colleagues and production teams to plan and execute maintenance activities * Recording and tracking work through the site maintenance management system * Supporting multiple operational areas to gain broader site experience
You’ll be well suited to this role if you: * Are a Maintenance Engineer, ideally time-served or qualified to NVQ, HNC or HND level. * Have a good understanding of UK engineering regulations and legislation * Enjoy a hands-on role, working both indoors and outdoors * Have experience in a manufacturing or production environment (FMCG experience preferred) * Work well as part of a team and are willing to support others when needed * Are comfortable using computerised maintenance and reporting systems
What’s on Offer: * Quarterly bonus scheme * Autonomous and inclusive working environment * Opportunities for career progression within the UK and internationally * Enhanced employer pension contributions * Health cash plan (including dental and eye care claims) * 24/7 wellbeing support via a clinically approved app * Life assurance up to 4x salary * Discounted branded products * Free on-site parking * Subsidised staff restaurant * Access to a wide range of retail discounts and employee benefits
Apply now for more information and immediate review

An opportunity has arisen with my client for a Principal Thermal Engineer to join them on an initial 12-month contract. As the Principal Thermal Engineer you will play a critical role in ensuring products deliver the necessary performance against key thermal requirements. Role: Principal Thermal Engineer Pay: £50 per hour via Umbrella Company Location: Stevenage Contract: 12 Months Hours: Monday - Friday, 37 hours per week Security Clearance: SC to start, DV clearance would be beneficial, UK eyes only project Responsibilities: Take ownership for delivering packages of thermal analysis work.
Provide mechanical analysis support to develop designs and deliver thermal performance evidence.
Deliver analysis evidence in clear reports with firm conclusion statements.
Participate in team meetings and design reviews.
Manage workload against time schedules and report progress regularly to stakeholders.
Responsible for dealing and collaborating with project stakeholders (internal & external).Skillset/experience required: An experienced ANSYS Mechanical user
Degree qualified in a STEM subject.
Proven ability to carry out thermal analysis through the application of hand calculations and Finite Element methods (e.g. ANSYS etc.).
Experience in one or more of the following areas:
Carrying out studies to determine the effects of conduction, convection and radiation on the thermal response of systems;
Thermal analysis of electronics;
Application of MATLAB-Simulink to deliver thermal studies;
Use of CFD to assess thermal behaviour;
Scripting using MATLAB or Python.
Ability to make quick/simple assessments to progress design activities in an efficient manner.
Self-motivated and organised individuals, who are great problem solvers and can take responsibility for the delivery of work.
Ability to work as a part of a multi-disciplinary team, as well as independently.
Strong verbal and written communication skills with the ability to network and influence internal and external customers.
Relevant experience in an equivalent or comparable industry would be advantageous. If you are interested in applying for this position and you meet the requirements, please send your updated CV to: Natalie Dalkin at Line Up Aviation Line Up Aviation has carved its own place in the recruitment of Aviation and Aerospace personnel all over the world for more than 30 years. We work with some of the industry’s best-known companies who demand the highest standard of applicants. "Follow @LineUpAviation on Twitter for all of our latest vacancies, news and pictures from our busy UK Head Office. Interact with us using the #LineUpAviation tag at anytime! Thank you for your follow

Are you a hands-on person who enjoys travelling often? Do you have strong electrical and mechanical installation experience?
We are seeking a skilled and motivated Installations Engineer with an electrical bias to join our team
As the Installations Engineer , you will be responsible for supervising our installation engineers and subcontractors, supporting project planning, and maintaining clear communication with clients. You will also deputise for the Installations Manager when required, contributing to project success and customer satisfaction.
What We Offer for the Installations Engineer : * Competitive hourly pay, including time paid from home. * A company vehicle to support your travel needs. * Career development opportunities * Become a member of an Employee-owned trust Upon completion of Probationary: * Cycle to work scheme * Option to buy additional leave * Option to join Private medical insurance
Installations Engineer Key Responsibilities: * Drive electrical and mechanical installations to meet agreed timelines and quality standards. * Supervise Logistex Installation Engineers and subcontractors under Logistex control, as directed by the Installations Manager. * Assist in planning labour allocation, equipment hire, and transport to ensure successful project delivery. * Deputise for the Installations Manager by attending project planning and site progress meetings. * Assemble and install Logistex products and associated equipment to engineering specifications.
About You: * Strong electrical and mechanical installation experience. * Proven leadership skills with the ability to manage teams and subcontractors effectively. * Excellent organisational and planning skills, with attention to detail. * Clear and confident communicator, both with internal teams and customers. * Flexible and willing to travel frequently as part of the role. * A valid driver’s license is essential.
What are you waiting for, make your application today

Role: Advanced Electrical Engineer (Electronics) Location: Yeovil, Somerset Employment Type: Hybrid Contract (Some project phases will require increased on-site presence) Rate: £60 - £65 per hour (PAYE only) plus holiday pay in addition Hours: 37 hours per week (flexible start/finish) ** We can only accept UK or NATO passport holders due to the nature of the work. Please DO NOT apply if you do not hold a UK or NATO passport. An opportunity is available for an experienced Advanced Electrical / Electronics Engineer to support the design and development of high-integrity electronic controllers used within Environmental Control Systems (ECS) and Life Support Systems for aerospace applications. You will join a multidisciplinary electronics team working on safety-critical hardware integrated with specialised software, delivering solutions across commercial, defence, and space aircraft platforms. The role is based at a well-established aerospace engineering and manufacturing site with extensive test and qualification facilities. Main Responsibilities: Support the full electronics design lifecycle, from concept and requirements capture through detailed design, verification, production, and in-service support
Define and document electronics requirements, design plans, and technical specifications
Design analogue and digital circuits, progressing concepts through schematic design, PCB layout, and full manufacturing drawing packs
Produce all required design, verification, and test documentation to support certification and manufacture
Participate in design reviews, clearly presenting technical content to both technical and non-technical stakeholders
Ensure compliance with relevant quality processes, standards, and regulatory requirements
Work closely with manufacturing teams and external suppliers to support PCB build, assembly, test, and system integration
Provide technical support for manufacturing issues and in-service investigations Ideal candidate profile: Degree (or equivalent experience) in Electronics Engineering or a related discipline
Minimum 3 years’ electronics design experience ideally within the aerospace, defence or naval industries (Essential)
Strong analogue and digital electronics design capability
Experience with low-power digital circuit design
Solid understanding of low-frequency analogue interface design
Proficiency with industry-standard ECAD tools (Mentor Graphics preferred)
Knowledge of DFM (Design for Manufacture) and DFT (Design for Test) principles
Familiarity with EMC design and qualification requirements
Strong analytical, problem-solving, and communication skills
High attention to detail and documentation quality
PCB layout experience is desirable Vetting will include a right to work check, drug screen, 5 years’ referencing and a DBS check. If you are interested in applying for this position, and you meet the above requirements, please apply immediately. Due to the number of applications we receive, it’s not always possible to contact unsuccessful applicants. Unless you hear from us within 14 days of your application, please assume that you have been unsuccessful on this occasion

Benefits Package: £40,000 - £45,000
New role for the business so autonomy to make this this position your own.
Excellent training scheme
Opportunities to grow and develop within the organisation.
PensionThis company have a dynamic work environment, they believe in team work and trust, they would like creative minds and are always looking for innovation and new ideas. They are currently experiencing exciting growth plans with work orders and projects growing at a rapid rate, this has led to the requirement for a Mechanical Design Engineer to join their multi-disciplined team. The business supply their products worldwide and are currently going through A huge growth period, this is a new role for the company which would make it an excellent time to be join this business and make the role your own. Role & Responsibilities: Support the team in new product development driven by company and market requirements; and provide mechanical engineering support for current products to enhance productivity, reliability and continuity of performance and build, ranging from small component designs to complex turnkey solutions.
From a top level brief, and working in collaboration with electrical, controls and software engineers - design and implement cost-effective equipment and solutions for engineering problems and help improve safety, reliability and throughput.
Developing a project specification with colleagues, often including those from other engineering disciplines.
Producing details of specifications and outline designs.
Designing robust solutions within a 3D environment, ensuring best practice modelling to minimise waste in the model and eliminate conflicting information between models and drawings.
Discussing and solving complex problems with customers, internal departments, subcontractors and suppliers, considering the implications of issues such as cost, safety and time constraints.
Creation of documentation for the release of products to production, including but not limited to BoM, spares list, build instructions and assembly drawings.Knowledge, Skills & Experience: The ideal candidate will be qualified to degree level in Mechanical Engineering, Engineering Science, Manufacturing Engineering or equivalent.
Ideally you will have a minimum 3 years’ experience in a product development environment specifically design for manufacture, assembly and service; to ensure design concepts can be consistently manufactured to enable repeatability of function and operation.
Experience of using Autodesk Inventor for part drawing and assembly creation. Other CAD packages would be considered. (Creo, Solidworks)
Experience of BoM creation and control within CAD package.
Experience of Vault or other PLM software.
Ability to interpret and evaluate both mechanical and electrical drawings.If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Multi Skilled Maintenance Engineer South Wales - Cardiff 27946/534 £45,000 - £57,500, depending on experience + Company benefits (Profit share, pension etc) Salary & Benefits: Salary £45,000 - £57,500 (DOE)
Annual profit share, up to 10%
up to 27 days holiday plus bank holidays
9% company pension (5% employer contribution + 4% employee contribution)
Sick pay scheme
Life insurance
Employee Assistance Programme An exciting opportunity to join a successful award-winning market leader, who has supplied high-quality products and trusted building solutions to some of the most iconic and high-profile projects around the world. This 40-year established, multi-million-pound company with an enviable share of the market has invested heavily in improving the infrastructure and production capacity, is also in a leading position to capitalise on the market growth. Roles & Responsibilities: Support the engineering team by carrying out systematic tasks and continuous improvements to plant and machinery to improve existing manufacturing processes.
Use initiative to identify areas that will improve the production performance, line utilisation and focus on reducing scrap levels.
Provide maintenance support regarding projects.
Work on a large variety of equipment including - gear boxes, pumps, motors, bearings, drives, inverters, relays, sensors, conveyor systems and PLC’s. Knowledge, Skills & Experience: Multi skilled engineer - ideally electrical bias but will consider mechanical bias. 60:40 split
Apprentice trained/HNC qualified.
Worked within manufacturing.
Strong problem solving/fault finding ability and experience.If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Air Conditioning Installation Engineer Salary: Up to £61,000 Location: London and home counties Shift Schedule: Monday - Friday We are seeking an experienced Air Conditioning Installation Engineer to lead a team of engineers delivering high‑quality installations across commercial and domestic sites throughout London and the Home Counties. This is a hands‑on role combining technical expertise with leadership, planning, and customer‑facing responsibilities. Responsibilities Installation, maintenance and repair of air conditioning systems
Good communication with customers.
Troubleshooting potential issues with clients. Requirements for the role: F/Gas Certification
Must have a full and clean driving license
Strong customer facing and leadership skillsBenefits package: Door to door paid travel
Pension Contribution
Private van use
Progression oppertunities
workplace pensionKeywords: HVAC, Engineer, Air Conditioning, A/C, aircon If you are interested in this role or looking for something similar, please contact our Recruitment Consultant Alfie Abraham directly at or call them for a confidential discussion on (phone number removed) If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Controls Engineer Ormskirk Days role, Monday to Friday. Flexi £55,000+ (DOE) leading Bonus, Pension, Private Healthcare, Life Assurance, Holidays, other benefits This is an extremely rare opportunity to work for a global group’s flagship manufacturing site. The business is looking for a self driven Engineer with specialist experience in Industrial Process Control and Instrumentation to support the ongoing development of a very successful R&D and manufacturing function. Not only does this position present long term job security, but ongoing technical development and career progression. Role Description Create and enhance process control systems from concept through to implementation.
Work across SCADA development, PLC programming, and advanced control techniques from PID loops to AI and machine learning.
Develop and implement inspection systems and instruments to maintain top-tier product and process quality.
Partner with R&D and production teams to identify and deliver process improvements safely and effectively.
Provide both on-site and remote technical support, while upgrading and maintaining existing systems.
Be open to occasional overseas travel as part of your role.
Keep up to date with the latest technologies and innovations in process controlSkills and Qualifications A degree in a relevant engineering subject
Excellent experience with industrial process control and instrumentation
Proven expertise with electrical and electronic design
Project Management experience, including budgets, deadlines and stakeholder managementCompany Information As a business our client is a true market leader within their industry with a strong presence across the UK. With a secure portfolio of clients these roles provide a stable and secure opportunity in the present economic market. In return for your commitment my client offers a stable and secure career for technically motivated engineers. If you feel this is of interest, please click the link to apply If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

M365 and Entra Technical Architect Frimley or Preston Based (Mainly remote) £1000 per day Umbrella Inside IR35 12 Month Contract initially. This is a great opportunity to work within one of the UK’s leading Defence organisations based In Frimley or Preston. Mainly remote with 1-2 days per month on site. The Azure Engineer is responsible for building, operating, and optimising cloud infrastructure and platform services within Microsoft Azure. This role provides hands‑on engineering, operational support, and continuous improvement of Azure services to ensure secure, scalable, and resilient cloud delivery. The engineer works closely with architects, security teams, and application owners to implement solutions that follow best practice, automation standards, and governance controls. Knowledge Deep understanding of Microsoft 365 architecture including Exchange Online, SharePoint Online, Teams, OneDrive, and Purview.
Expert knowledge of Entra ID concepts including Conditional Access, MFA, PIM, identity lifecycle, hybrid identity, and identity protection.
Strong working knowledge of Zero Trust, modern security models, and Microsoft Security stack integrations.
Understanding of endpoint management frameworks including Intune, compliance policy design, Autopilot, and device governance.
Familiarity with modern authentication protocols including OAuth 2.0, OIDC, SAML, SCIM, and certificate‑based authentication.
Knowledge of compliance frameworks and data governance within Microsoft 365 (DLP, retention, eDiscovery).
Understanding of Microsoft Graph, automation tooling, and API‑based platform integrations.
Solid awareness of enterprise networking concepts and their interactions with cloud services.
Knowledge of service management frameworks (e.g., ITIL) and operational governance models.
Awareness of cloud cost management, licensing optimisation, and platform lifecycle planning… Skills Ability to design secure, scalable, and resilient enterprise architectures across M365 and Entra ID.
Strong analytical and problem‑solving skills with ability to resolve complex identity and collaboration challenges.
Excellent documentation skills, including HLDs, LLDs, architectural diagrams, and technical standards.
Strong stakeholder management and the ability to explain technical concepts to non‑technical audiences.
Hands‑on skills with PowerShell, Microsoft Graph, and automation tooling.
Ability to lead workshops, design sessions, and technical governance forums.
Skilled in architectural reviews, solution assurance, and quality control processes.
Ability to work across teams including security, networking, service management, and engineering.
Strong change management and adoption‑driven mindset.
Capable of mentoring engineers and contributing to team capability maturity… Qualifications Microsoft Certified: Cybersecurity Architect Expert, Identity and Access Administrator, or related certifications.
Microsoft 365 Certified: Enterprise Administrator Expert or equivalent experience.
Relevant certifications in security frameworks (e.g., CISSP, CCSP) are desirable.
Formal architecture qualifications (e.g., TOGAF, SABSA) beneficial but not mandatory.
Proven experience delivering large‑scale M365 or Entra transformations.
Background in enterprise IT, cloud architecture, or related disciplines.
Strong grounding in ITIL or similar IT service management frameworks.
Experience working in large, complex enterprise or regulated environments.
Evidence of ongoing professional development in cloud and security technologies.
Bachelor’s degree in Computer Science, Information Systems, or equivalent practical experience (preferred but notFor more information please contact Lauren Morley at JAM Recruitment or click apply

Multiskilled Maintenance Engineer (FMCG) - Days
Derby
£45,000 per annum
Monday-Thursday 7am - 4pm / Friday 7am-12pm A well-established and fast-paced FMCG manufacturer in Derby is seeking a skilled Maintenance Engineer to join their engineering team on a permanent days-based shift. This is a great opportunity to work in a high-volume production environment where reliability, efficiency, and continuous improvement are key. Key Responsibilities: Carry out planned preventative maintenance (PPM) and reactive maintenance on production machinery
Diagnose and fault-find on electrical and mechanical systems
Minimise downtime and ensure production targets are met
Support continuous improvement initiatives and equipment upgrades
Maintain accurate maintenance records and comply with health & safety standardsRequirements: Proven experience as a Maintenance Engineer within an FMCG or fast-paced manufacturing environment
Strong electrical and/or mechanical fault-finding skills
Relevant engineering qualifications (e.g. NVQ Level 3, HNC, or equivalent)
Proactive approach with strong problem-solving ability
Ability to work effectively both independently and as part of a teamIf you’re a motivated Maintenance Engineer looking for a days-based role within a dynamic FMCG environment, this could be the ideal next step in your career. If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

A brilliant opportunity has arisen with a business looking to bring in an experienced Maintenance Engineer to the site to work on nights as a result of extensive investment. This role will report directly to the Engineering Manager and involves full responsibility for all manufacturing machinery and associated equipment on the night shift. This position offers excellent security and stability for an experienced Electrical Bias Engineer that is happy to work on night shifts. You will be sole engineer on site but there is an experienced production nights team. Role Description Planned and reactive maintenance minimising downtime
PPM, Breakdown maintenance on a range of industrial equipment
Adhering to Health & Safety on site at all times
Working within a Skilled Team
Reporting into the Engineering Manager
Maintenance in various industrial equipment
Improvement ProjectsSkills and Qualifications Time-Served Electrical Bias Maintenance Engineering Experience
Industrial Engineering Background
Happy to work on a lone engineering role with a production team
Strong understanding of H&S best practice
Willingness to train & take on internal training opportunitiesCompany Information As a business our client is a true market leader within their industry with a strong presence across the UK. With a secure portfolio of clients these roles provide a stable and secure opportunity in the present economic market. In return for your commitment my client offers a stable and secure career for technically motivated engineers. If you feel this is of interest, please click the link to apply. If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Benefits Package: £46,000
Hands on Training and development available on the job
Excellent training scheme
Plenty of Overtime available.
Pension
Days Shift PatternInnovation and excellence in manufacturing processes has put this company at the forefront of their industry. Boasting several blue chip clients they are enjoying strong market conditions and are busier than ever, they are valued as an employer of choice in the local area that would provide you a job for life as well as career development with training available to upskill you as an Engineer. A Mechanical Maintenance Engineer is required to join their highly skilled team as soon as possible. Role & Responsibilities: To maintain, repair and fault find on plant and machinery using various maintenance disciplines.
Contribute toward machine efficiency and development programmes using existing maintenance programmes and CI methodologies including 5 why analysis.
Complete preventative maintenance inspections and identify and implement action plans needed to stop reoccurring faults.
Completion of Risk assessments and equipment isolation procedures.
Fault find and repair on a range of mechanical equipment and machinery.Knowledge, Skills & Experience: The successful candidate will have a minimum of 5 years’ experience working as a maintenance technician in a busy, high pressured manufacturing environment. Having served a recognised apprenticeship in a suitable discipline and ideally educated to HNC level. The successful candidate will be mechanical biased but will have experience in electrical disciplines. The candidate must be experienced in fault finding and repairs in Hydraulic and Pneumatic systems, servicing and repair of gearboxes and other large mechanical equipment, workshop skills including welding, fabrication and use of workshop equipment including a lathe, milling machine and pillar drill. Mechanical maintenance experience in a manufacturing environment is essential, ideally medium to heavy industry experience would be desirable. If you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Multiskilled Maintenance Engineer Location: Telford Salary: £48,000 - £50,000 Shift Pattern: 4 on 4 off (Days & Nights) Type: Full-time, Permanent The Opportunity We’re recruiting for a Multiskilled Maintenance Engineer to join a well-invested manufacturing site with brand-new machinery and a strong focus on planned and preventative maintenance. This is an excellent opportunity for an engineer who enjoys fault finding, continuous improvement, and working on modern equipment within a team that prioritises engineering standards over firefighting. You’ll also have the opportunity to attend OEM training, giving you direct insight into the latest machinery and best practices. Key Responsibilities Deliver planned preventative maintenance (PPM) to maximise equipment reliability and uptime
Carry out effective fault finding and root cause analysis on mechanical systems
Maintain and repair equipment including hydraulics, pneumatics, bearings, chains, and motors
Support continuous improvement activities and machinery upgrades
Work closely with production to minimise downtime and improve performance
Ensure all engineering work is completed in line with H&S and quality standards What We’re Looking For Strong background in maintenance engineering within a manufacturing environment
Solid mechanical fault-finding skills (electrical knowledge beneficial)
Experience working with PPM systems and a proactive maintenance mindset
Ability to work both independently and as part of a close-knit engineering team
A driven, hands-on engineer who takes ownership of their work Why Apply? Modern site with ongoing investment in new machinery
Opportunity to move away from reactive maintenance into a more planned environment
OEM training and continuous development
Stable, growing business with a supportive engineering culture
Varied role with real engineering involvement, not just breakdown responseIf you are interested in this position please click ‘apply’. Hunter Selection Limited is a recruitment consultancy with offices UK wide, specialising in permanent & contract roles within Engineering & Manufacturing, IT & Digital, Science & Technology and Service & Sales sectors. Please note as we receive a high level of applications we can only respond to applicants whose skills & qualifications are suitable for this position. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

CE&I Senior Design Engineer - Site Based (Contract) Location: Cumbria (3 days on site / 2 days remote) Rate: ~£60 per hour (Umbrella PAYE) Contract: 12 months (strong likelihood of extension) Start: ASAP The Opportunity We’re seeking an experienced CE&I Senior Design Engineer to join a high-profile project supporting commissioning activities on a major nuclear site in Cumbria. This is a site-focused role offering a balance of on-site engineering support and remote working, with occasional travel to Warrington. You’ll play a key role in delivering and supporting detailed CE&I design solutions, working closely with commissioning teams to ensure successful project execution. Key Responsibilities Provide front-line, site-based design support to commissioning teams
Deliver and check detailed CE&I designs and design changes
Support the delivery of work by other engineers within the team
Ensure designs meet functional and business requirements
Collaborate across multidisciplinary teams on complex engineering challenges
Mentor and support early-career engineers Essential Requirements (Must-Have) Minimum HND (or equivalent) in a relevant discipline
Incorporated Engineer (IEng) status (or equivalent)
Active SC Clearance
5+ years’ experience as a CE&I Senior Design Engineer
Proven experience: Working on external multidisciplinary projects
Providing site-based design support to commissioning teams
Delivering and checking detailed designs/engineering changes
Strong understanding of: PES-based control systems
Process instrumentation
Excellent problem-solving, communication, and collaboration skills
Willingness to support and mentor junior engineers Desirable (Highly Advantageous) 7+ years’ experience in a similar role
Experience working to Sellafield Ltd engineering standards
Previous Sellafield site experience and/or clearance (strong advantage)
Experience across both external and nuclear/SL multidisciplinary projects Working Arrangements 3 days per week on site in Cumbria
2 days remote working
Occasional travel to Warrington office (~once per month) Why Apply? Long-term contract with strong extension potential
Competitive hourly rate
Opportunity to work on a major nuclear programme
Blend of hands-on site work and flexible remote working
If you’re a CE&I Engineer with strong commissioning support experience and the required clearance, this is an excellent opportunity to step into a critical project role

CE&I Safety System Design Engineer Silos MSSS SEP 1 & 2 | Nuclear & High-Hazard Environment Warrington Hybrid - 3 days on site £51-£56/hour | Inside IR35 Are you a CE&I Safety System Design Engineer looking to make a real impact on nationally significant infrastructure? This is a high-profile opportunity to join the Silos MSSS SEP 1 & 2 programme, working at the heart of safety-critical design in a complex, regulated environment. You’ll be part of a specialist CE&I design team, delivering and checking Safety System design packages that underpin safe operations - while also supporting commissioning activities and mentoring the next generation of engineers. The Role You’ll play a key role in: Delivering and checking CE&I Safety System design packages to meet safety, functional and business requirements
Supporting and reviewing designs produced by other engineers within the team
Working across disciplines to ensure compliant, integrated solutions
Providing technical support to Commissioning activities
Supporting and developing early-career engineersThis role offers a strong mix of hands-on technical delivery, collaboration, and leadership within a highly respected programme. What We’re Looking For Essential Minimum HNC (or equivalent) in an engineering discipline Incorporated Engineer status (or working towards) 3+ years’ experience delivering CE&I Safety System design on external multi-discipline projects Proven experience from concept design through to handover Working knowledge of relevant engineering standards Strong verbal and written communication skills Experience supporting Commissioning activities A collaborative mindset and willingness to support junior engineers Desirable 5+ years’ experience delivering CE&I Safety System design on external and/or SL projects Experience implementing new or modified safety requirements on existing systems A pragmatic, solutions-focused approach in complex, safety-critical environments Why Apply? Work on a long-term, high-profile nuclear programme
Competitive £51-£56/hour (Inside IR35)
Hybrid working with a clear on-site/remote balance
Be part of a technically strong, supportive engineering team
Opportunity to influence safety-critical outcomes and mentor others

EC&I Engineer - Sellafield Projects
£46-51 per hour (Inside IR35)
On-site - Sellafield
Sector: Nuclear Are you an EC&I Engineer looking for a hands-on, site-based role on one of the UK’s most complex and nationally significant nuclear sites? This is a strong opportunity to join a multidisciplinary engineering team delivering critical EC&I design and engineering solutions across Sellafield projects.
This role is fully site-based, ideal for engineers who enjoy being close to construction, commissioning, and real-time engineering challenges in a highly regulated environment. Key Responsibilities Deliver and support EC&I engineering activities across nuclear infrastructure projects
Produce and review design documentation, drawings, and calculations
Ensure EC&I designs comply with Sellafield standards, safety case requirements, and site licence conditions
Interface closely with construction, commissioning, safety, and project teams to support effective delivery
Contribute to technical problem-solving and on-site engineering resolution
Requirements Proven experience as an EC&I Engineer within nuclear or other highly regulated industries
Working knowledge of relevant BS EN and IEC standards
Experience working to Sellafield site procedures (or equivalent) is advantageous
Strong communication skills and the ability to operate effectively in a site environment
SC clearance preferred or the ability to obtain
Why Join? Competitive £42-£46/hour (Inside IR35)
Long-term, site-based role on a flagship UK nuclear programme
Hands-on engineering exposure at one of Europe’s most complex facilities
Opportunity to build deep site experience and contribute to critical national infrastructure
Apply now to be part of Sellafield’s next phase of engineering delivery - on site, technically challenging, and genuinely impactful

Senior CE&I Engineer - Sellafield Projects Contract | £51-£56/hour (Inside IR35) Warrington | Hybrid - 3 days on site / 2 days remote Are you a Senior Control, Electrical & Instrumentation Engineer looking to apply your expertise within one of the UK's most complex nuclear environments? We are seeking a Senior CE&I Engineer to support a range of engineering and decommissioning projects across the Sellafield programme, delivering robust CE&I design and safety documentation within a highly regulated setting. This role offers the opportunity to contribute to nationally significant nuclear decommissioning work, supporting the delivery of safety-critical systems that underpin long-term hazard reduction at Sellafield. Key Responsibilities Deliver CE&I design work packages across a variety of nuclear engineering and decommissioning projects Produce and check design substantiation, safety documentation, and technical deliverables Provide expert CE&I input into design justification and safety case documentation Develop and review functional safety deliverables in line with IEC 61508 (up to SIL 1) Resolve complex technical issues using safe, compliant, and pragmatic engineering solutions Support installation, commissioning, and documentation activities where required What We're Looking For CEng or IEng preferred, or equivalent experience Strong background in CE&I design within nuclear or other highly regulated industries Demonstrated experience delivering fit-for-purpose engineering solutions to time and budget Solid understanding of functional safety, SIL-rated systems, and safety case development Ability to communicate complex technical issues and solutions clearly to stakeholders Technical Knowledge & Standards Experience or familiarity with: CE&I regulations and standards including CDM, PUWER, BS EN 13849 / 62061, BS 7671 Industrial installation standards, UKCA / CE marking Engineering drawings, calculations, and design documentation Desirable Skills Design risk assessments, installation method statements, and engineering output packs Panel build documentation, technical files, and O&M manuals Experience with PLC / SCADA control systems and industrial network architectures A pragmatic, risk-based engineering approach grounded in sound judgement Why Join? £51-£56/hour (Inside IR35) Hybrid working model - 3 days in Warrington Opportunity to work across major Sellafield engineering and decommissioning programmes Technically challenging safety-critical work with genuine national importance Join a highly experienced and collaborative CE&I engineering team Apply now to play a key role in delivering safe, effective engineering solutions across some of the UK's most important nuclear projects