Astute’s Power team are looking to recruit an Outage QA /QC Engineer in Leeds on a contract basis.

Key skills required for the Outage QA/QC Engineer role

• Perform inspections of boiler pressure parts including membrane walls, superheaters, economisers, headers, drums, and associated pipework.
• Carry out manufacturing surveillance at vendor workshops, including monitoring fabrication activities against ITPs and project requirements.
• Verify welding activities including fit-up, welding parameters, weld mapping, and compliance with approved WPS/PQRs.
• Confirm welder qualifications and ensure consumables and welding processes meet specification requirements.
• Witness and review NDE activities (UT, RT, MT, PT) and confirm acceptance to relevant standards.
• Verify material traceability including heat numbers, MTRs, and PMI requirements where applicable.
• Witness pressure testing/hydrostatic testing and ensure test preparation and documentation is completed correctly.
• Record inspection results, produce reports, and support compilation of QA/QC documentation and turnover packs.
• Raise quality concerns and NCRs, supporting corrective action implementation and close-out.
• Liaise with contractors, site supervision, and client representatives to ensure quality expectations are met.
• Must hold QA/QC inspection experience in heavy industrial environments.
• Must hold Confined Space, Face Fit Testing Certificate, CSCS Card (or equivalent) and CSWIP Welding Inspector Qualification
• Must be prepared to work long hours

Location, day rate and timeframe of the Outage QA/QC Engineer role

• Leeds
• £30.00 per hour
• 2+ Months contract
• April 2026

INDPOW

Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government’s Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.

In aerospace manufacturing, there’s no pause button.

As a Lineside Engineer with our aerospace client, you’ll operate where pace meets precision — providing immediate technical support on the line, leading root cause investigations, and ensuring every build meets exacting standards. This is a role for engineers who enjoy being visible, hands-on, and trusted to make sound decisions in a fast-moving, safety-critical environment.

They role will support operations on a double day shift

Week of mornings – 6:00am – 1:10pm

Week of afternoons – 1:30pm – 8:40pm

Pay rate advertised includes shift uplift

Missions and Objective:

-Accompanies the production team / Autonomous Production Team (APT).
-Supports in identifying, analyzing and solving technical issues not directly manageable by the Operators & First Line Manager (FLM).
-Provides an E2E perspective at the shopfloor level within the production team / APT.
-Supports continuous production enablement by efficiently utilizing available resources & knowledge.
-Contributes to the Operational Excellence targets within her/his area by adhering to the continuous improvement of operational processes.
-Provides, creates and establishes necessary work document(s) to shopfloor technicians to unblock lead time impact and unexpected workload.
-Ensures interface management to relevant support functions needed.

Key Deliverables:

Input

• Notification (e.g. NC, Email, eLog book entry…) of a production issue.
• Logistic kit available at production team & current work order.

Outputs

• Technical analysis & enriched documents for Assembly Anomalies (AM) and NonConformities (NC).
• Design Query Note (DQN) including process & equipment issues (disruptions/deviations)
• Rework Work orders.
• Outstanding work management.
• Technical information (search for drawings, references, parts, tooling, documentation).

Main tasks/activities:
Disruption Management-Daily / on shift line side:

• Support in identifying NC on the shopfloor.
• Support in assessing the need for creating NCs and NC Notifications.
• Support on filling & describing the NC form by providing all relevant information and supporting on solving the NC.
• Support on following up the NC process and push for containment and corrective action.
• Support of supply chain quality management by providing information, data, excerpts etc. for further NC management.

Role: Lab EngineerDuration: 6 MonthsLocation:Stevenage, UK

The Role

This role plays a critical part in supporting laboratory environments that rely heavily on robust, secure, and validated computing systems. Youll work closely with scientific teams across R&D settings to ensure that laboratory instruments, data flows, and end-user systems function reliably and efficiently. With exposure to modern infrastructure, validated systems (GxP), IT/OT networks, and advanced analytical technologies, you will be at the forefront of enabling research through hands-on engineering, troubleshooting, and technical expertise.

Your responsibilities:

• Maintain, support, and troubleshoot a global fleet of ~8000 end-user computers across scientific and laboratory environments.
• Image, configure, and onboard new computers into the domain and ensure successful integration into lab networks.
• Secure new and existing hardware following IT security best practices and organisational standards.
• Work directly with scientists and business teams to resolve equipment-related issues and provide technical guidance.
• Troubleshoot, optimise, and implement data flows for various scientific instruments.
• Support validated data backup solutions for analytical equipment, including configuration, documentation, and equipment/software investigation.
• Provide incident management support, user coaching, and access management within R&D settings.
• Manage and resolve tickets through systems such as ServiceNow while ensuring quality and timely resolution.

Your Profile

Essential skills/knowledge/experience:

• Strong computer troubleshooting abilities across hardware, connectivity, network, and laboratory software issues.
• Background in End-User Computing, Desktop Support, or similar break/fix roles (approx. 80% workload).
• Understanding of IP addressing, subnetting, IT/OT networks, and basic firewall concepts.
• Strong familiarity with the OSI model and troubleshooting across network layers.
• Working knowledge of Active Directory for device/user management.
• Understanding of computer and endpoint security principles.
• Experience supporting validated systems (GxP) or regulated environments.
• Experience working with ticketing systems such as ServiceNow.

Desirableskills/knowledge/experience:

• Experience configuring validated data backup solutions for analytical laboratory equipment.
• Exposure to scientific instrument dataflows or laboratory informatics.
• Awareness of compliance considerations within GxP and non-GxP environments.
• Microsoft Excel proficiency for reporting, documentation, or workflow tracking.
• Experience in day-to-day operational support and/or broader project support.

Role Overview:

This role is an ideal gateway into IT and the wider opportunities within a major global IT company. You will have the opportunity to access the certification program for one of the world’s largest computer manufacturers. It would be well suited to those who have a passionate interest in IT but may not have had the opportunity to work in the sector, or those looking for the opportunity to gain further experience.

Flexible working hours between 8am and 6pm

The role consist of flexible working hours between 8am and 6pm. You will cover a set geographical area to provide on-site support for client’s IT hardware devices. You will be expected to work to a professional standard and ensure customer satisfaction through technical skills and strong customer service.

Responsibilities:

• As a Field engineer you will work with both commercial and residential clients to provide hardware technical and break fix support on Laptops, Desktops, Workstations, Tablets, Printers and Servers.
• Be involved in installing, maintaining, upgrading, and repairing of IT products such as PCs, Workstations, Printers, Terminals, Servers, and associated devices.
• To attend all Incidents/requests as directed by the Customer Incident Centre in a courteous and customer focused fashion as per your engineering work instruction guidelines.
• Ensure assigned incidents are monitored, updated, and progressed in the system Real Time.
• Co-ordinate between clients and vendors to ensure timely resolution of problems.
• Provide a high degree of customer satisfaction in all work undertaken
• Maintain and manage parts in line with returns return process and deadlines.

Essential Skills:

• Applicant must have a full valid UK drivers’ licence, own car, and business insurance or should apply for it upon offer.
• Ability to resolve hardware issues and basic software problems
• Capable of building (o/s and required software) and deploying PCs (desktop and Laptop)
• Good understanding of IT systems and environments.
• Strong customer service skills
• Analytical and problem-solving mindset.

Preferred but not essential skills:

• MCSE certification
• Manufacturer Enterprise server certification
• SAN Server
• A+
• Network+/CCNA
• Dell/Other vendor Certification to Enterprise level or above
• Experience in a data centre and in smart space technology is advantageous.

Please Note: Shortlisted candidates will be contacted via Call/Email.

Reasonable Adjustments:

Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients.

If you need any help or adjustments during the recruitment process for any reason, please let us know when you apply or talk to the recruiters directly so we can support you.

The position is based within the Product Support Engineering Department, which encompasses the following specialised technical areas:

• Logistic Support Analysis
• Reliability and Maintainability
• Reliability Centred Maintenance Analysis
• Engineering Data Exploitation
• Technical Publications
• Obsolescence Management
• Integrated Logistic Support Engineering

Key Responsibilities

• Support the Obsolescence Capability Lead in delivering Obsolescence Management Services across the portfolio, including developing processes and revising plans to accommodate evolving requirements.
• Prepare and assist in the production of materials for briefings, meetings, and formal working groups, both internal and external.
• Identify and raise obsolescence issues or opportunities at the earliest stage, supporting mitigation and development plans where necessary.
• Attend internal, supplier, and customer meetings as required.
• Collaborate with other functions—including Engineering, Supply Chain Management, and Training—to ensure Support Engineering and obsolescence activities remain aligned with wider organisational developments.
• Engage directly with customers on specific obsolescence-related matters.
• Coordinate Support Engineering deliverables (CDRLs), ensuring timely receipt, thorough review, and preparation of outputs ready for approval, with a strong emphasis on First Time Quality.
• Liaise with obsolescence personnel as appropriate to the role.
• Work under the direction of the Obsolescence Capability Lead and Product Support Engineering Manager to meet departmental objectives.

Preferred Skills, Qualifications and Experience

The ideal candidate will demonstrate some or all of the following attributes:

• Eligibility to obtain UK Security Clearance (SC) is essential.
• Comprehensive understanding of Support Engineering, specifically obsolescence within a military environment.
• Proven experience in Obsolescence Management.
• Strong analytical skills with the ability to interpret engineering data effectively.
• Ability to engage with cross-functional business stakeholders to identify optimisation opportunities and enhance supplier offerings to customers.
• Experience liaising with Original Equipment Manufacturer (OEM) platform teams to integrate UK solutions with existing base platform systems.
• Demonstrated commitment to driving First Time Quality in deliverables.
• Familiarity with international support standards, such as Defence Standard 00-600 and the ASD/AIA Suite of S Series ILS Specifications, is desirable.
• Ideally educated to degree level in a relevant Engineering discipline (not essential).

Please apply or get in contact on 01935403203 /

Senior Reablement Worker - Salisbury, Wiltshire, United Kingdom Salary: £16.35 - £17.47 per hour (plus 10% unsocial hours) Hours per week: 37 hours Rolling advert: We're continuously reviewing and interviewing applicants weekly for this job posting. We will stop accepting applications when sufficient applications have been received. Wiltshire Reablement - Empowering Independence If you are passionate about helping other and eager to advance in the care industry, consider joining our team as a Senior Support Worker. We believe in growing talent from within and offer our staff opportunities like NVQ apprenticeships, providing you with a solid foundation for career progression. Our Support Workers are the unsung heroes, providing crucial assistance to customers in the comfort of their homes post-hospital discharge. Collaborating hand-in-hand with dedicated occupational therapists, we co-develop personalised reablement plans, helping customers achieve their goals in the comfort of their homes. Operating on a rotating schedule, the team is available between 7 am to 10 pm, 365 days a year, ensuring continuous and dedicated support. As a Senior Support Worker, you will monitor, support, and supervise our dedicated Support Workers, ensuring the delivery of the highest standard of services for our valued customers. We would like to welcome candidates with either an NVQ Level 3 or equivalent substantial experience in a related field to apply, and we also welcome those who show an interested in pursuing a relevant qualification. Why us? Wiltshire Council is a friendly, welcoming place to work, with a 'One Council' ethos. That’s why we focus on getting the things that matter to our people right. Explore more benefits here! *Under the Health and Social Care Act (Regulated Activities) Regulations 2014, individuals involved in regulated activity must provide a full employment history and detail any gaps. Before clicking apply please complete this* full employment history form *and once completed please attach it to your application form.* *If you have applied for this role within the last six months, you do not need to reapply. Your application will remain on file and will be considered.* *While we welcome applications from job seekers who require skilled worker sponsorship, we are not able to issue a defined certificate of sponsorship due to limitations in our sponsorship capacity.* *We understand that AI tools can support you in preparing job applications. However, we value authenticity and would encourage you to ensure your submission genuinely reflects your own experiences, skills, and motivations.* Please download and read the role description and person specification carefully before you apply as well as Our Identity. *The council is committed to creating an environment of positive working relationships where everyone feels engaged, supported and able to thrive. Our Identity is a framework which sets out how we are all expected to lead, work and act to deliver our services. We will not tolerate discrimination, bullying or harassment of any kind. Everyone is expected to promote a culture of inclusion, dignity, trust and respect which is underpinned by our vision and Our Identity framework.* For more details, contact Sabrina Beedie, Team Leader via email here. This role may be subject to certain successful security checks; please see the role description for more information. We are firmly committed to safeguarding and promoting the welfare of children, young people and vulnerable adults and to the principles of inclusion and diversity in both employment and the delivery of services. Read our statement of commitment to equality and inclusion. Disability Confident Employer Application process *Please ensure to regularly check your spam/junk folder for any communication from us regarding your application status. We wouldn't want you to miss out on any important updates or interview invitations. Thank you!*

Swimming Teacher - Warminster, Wiltshire, United Kingdom Salary: £17.99 - £19.22 per hour (inclusive of a 10% market supplement) Hours per week: Variable zero hours Interview date: To be confirmed following shortlisting Rolling advert: We're continuously reviewing and interviewing applicants weekly for this job posting. We will stop accepting applications when sufficient applications have been received. Leisure Services – Inspiring Members to Live Active Lives Are you passionate about swimming and skilled at motivating others? Consider joining our dedicated Aquatic team, who are committed to making our community healthier and reducing health differences. Our Swimming Teachers are a vital part of our team. They teach safe, fun, effective and enjoyable classes as part of a swimming programme or 1-1 tuition environments. Applicants for the position should ideally possess a Level 2 or above Swim England swimming teacher qualification and relevant teaching experience in a similar environment; however, those with a minimum Level 1 qualification may be considered if they can provide evidence of enrolment in a Level 2 course. If you care about keeping kids and vulnerable adults safe, and you're good at communicating and staying organised, we'd love to have you on our team. Let's work together to inspire health and well-being in our community through swimming! *This position comes with a 10% market supplement payment. All market supplement payments are subject to review on an annual basis.* Why us? Wiltshire Council is a friendly, welcoming place to work, with a 'One Council' ethos. That’s why we focus on getting the things that matter to our people right. Explore more benefits here! *We understand that AI tools can support you in preparing job applications. However, we value authenticity and would encourage you to ensure your submission genuinely reflects your own experiences, skills, and motivations.* Please download and read the role description and person specification carefully before you apply as well as Our Identity. *The council is committed to creating an environment of positive working relationships where everyone feels engaged, supported and able to thrive. Our Identity is a framework which sets out how we are all expected to lead, work and act to deliver our services. We will not tolerate discrimination, bullying or harassment of any kind. Everyone is expected to promote a culture of inclusion, dignity, trust and respect which is underpinned by our vision and Our Identity framework.* For more details, contact Lee Calver, Centre Manager, at . This role may be subject to certain successful security checks; please see the role description for more information. We are firmly committed to safeguarding and promoting the welfare of children, young people and vulnerable adults and to the principles of inclusion and diversity in both employment and the delivery of services. Read our statement of commitment to equality and inclusion. Disability Confident Employer Application process *Please ensure to regularly check your spam/junk folder for any communication from us regarding your application status. We wouldn't want you to miss out on any important updates or interview invitations. Thank you!*

Now is the time to inspire the future of healthcare together.

Our client is a leading global medical technology company with over 170 years of expertise and 18,000 patents. More than 68,000 dedicated colleagues across 70 countries are committed to shaping the future of healthcare. We stand alongside our customers worldwide, supporting them in delivering exceptional care to their patients. Every day, approximately five million patients benefit from our innovative technologies and services in diagnostic and therapeutic imaging, laboratory diagnostics, molecular medicine, digital health, and enterprise services. This commitment is at the heart of everything we do.

Join our client’s team as an IQA Technician within the Point of Care Diagnostics business unit.

Role Overview

The IQA Inspector is responsible for inspecting, controlling, and approving all incoming materials at the Sudbury manufacturing sites. This includes completing all relevant documentation and ensuring traceability in line with applicable quality standards. The IQA Inspector guarantees that all materials used in production meet stringent quality requirements.

Key Responsibilities

• Inspect incoming goods across Sudbury sites using measurement equipment, specifications, and Quality Control Plans (QCPs), ensuring full compliance before assembly.
• Complete all associated documentation and records, adhering to Good Documentation Practises (GDP).
• Contribute to the control and disposition of non-conforming materials, including segregation and documentation, following established procedures.
• Communicate effectively with internal and external suppliers and stakeholders; act as the primary point of contact for part quality enquiries and escalate issues as necessary.
• Complete all assigned training within specified timeframes.
• Support other Quality functions at Sudbury, including in-process testing, inspections, and final product release processes.
• Assist with internal and third-party site audits.
• Participate in SQDIP meetings, provide accurate reports promptly, and take ownership of achieving role-specific KPIs.
• Maintain supplier ‘Quality Approved’ samples for relevant attributes such as colours and finishes.
• Utilise business systems including CATSWEB, CERDAAC, SAP, Documentum, and Learn4U efficiently.

Regulatory Compliance

• Represent the business during customer audits and regulatory inspections, demonstrating compliance with required systems.
• Maintain adherence to Data Integrity Regulations, GAMP standards, 21 CFR Part 11, and other relevant regulatory guidelines.

Environmental, Health and Safety (EHS)

• Ensure compliance with safety, health, and environmental (SHE) legislation.
• Promote a safety-first culture by maintaining a zero-accident environment, preventing accidents, and protecting the facility’s environmental standards.

Teamwork and Quality Assurance

• Collaborate with project teams to support the selection, installation, and commissioning of new equipment.
• Apply knowledge of Quality Management Systems with competence and practical understanding.

Skills and Experience

• Proven ability to manage time effectively, demonstrating a strong drive to succeed.
• Flexible and adaptable approach to varied workloads.
• Self-motivated and reliable, able to work independently and take initiative.
• Effective team player with strong cross-functional communication skills.
• Curious and eager to learn, with excellent written and verbal communication abilities.

Qualifications

• Minimum of five years’ experience in a medical manufacturing environment.
• In-depth knowledge of Quality Management Systems, ISO 13485, and 21 CFR 820.
• Proficient in IT, with strong skills in Microsoft Office applications.
• Familiarity with Good Documentation Practises (GDP) and Good Manufacturing Practises (GMP).

Senior Quality Assurance Engineer

Cumbria Site-Based (Security Cleared Role)

40 hours per week

12 Month Contract

Security Clearance Required: SC – Must be Sole British

About the Role

We are seeking an experienced Senior Quality Assurance Engineer to support delivery within a highly regulated environment. This role will be responsible for ensuring quality compliance across project activities, supporting audits, overseeing inspection and test documentation, and driving continuous improvement within the Integrated Management System (IMS).

This is a key assurance role requiring strong technical understanding, vendor oversight capability, and experience within major hazard or regulated industries.

Key Responsibilities

• Produce, review, and endorse Quality Plans and Inspection & Test Plans (ITPs).
• Undertake compliance verification activities to ensure adherence to project requirements.
• Liaise with Quality Control and inspection stakeholders to verify:
• Processes, Documentation, ITPs
• Weld procedures and related technical submissions
• Ensure project quality standards are consistently achieved and raise authorised documentation where non-conformance is identified.
• Review and update the Integrated Management System (IMS) as required.
• Maintain package status and progress reporting, raising issues and coordinating with project and client QA/QC teams.
• Support internal and external audits, track actions, and implement improvements to reduce non-compliances.
• Advise procurement teams on vendor competence to ensure quality considerations inform supplier selection.

Required Experience

• Strong working knowledge of: ISO 9001:2015
• Contractor Quality Requirements (SLM)
• Technical understanding of Mechanical, Electrical, or Civil Engineering disciplines.
• Extensive Quality Assurance experience within regulated or major hazard industries.
• Experience working within structured management systems and audit frameworks.

Qualifications (Preferred)

• Internal Auditor qualification/ISO 9001:2015 Lead Auditor certification
• Degree in a relevant discipline OR professional qualification (e.g., CQI Level 5 Diploma)
• Membership of the Chartered Quality Institute (CQI) or working towards professional status

At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels and this is a superb opportunity for Quality Engineers looking for new employment.

As part of putting people first, we strive to be an equal opportunities employer and we are always looking to increase the diversity of our workforce, working closely with our clients to ensure everyone is included.

Role: Huawei OSS Design SpecialistType: Contract (12 Months)
Location: Bristol, UK
Working Model: Hybrid

Payrate: (Apply online only) GBP/day on Inside IR35 on Umbrella

We are urgently seeking an OSS Design Specialist to join the NEMS team in Bristol. In this critical role, you will ensure the peak performance and service continuity of Huawei radio base stations on the EE network during a major, government-mandated vendor swap.

What we need from you:

• Huawei Expertise: Deep, hands-on knowledge of the Huawei MAE platform (or U2020) and relevant network protocols.
• Architecture & Faults: Strong understanding of RAN architecture, EE OSS interdependencies, and a proven track record in OSS fault analysis and remediation.
• Security Tools: Experience working alongside security agents like Qualys and CrowdStrike within OSS platforms.

This is an urgent vacancy with a deadline where the hiring manager is shortlisting for an interview immediately. Please apply with a copy of your CV or send it praveen. Com

Randstad Technologies is acting as an Employment Business in relation to this vacancy.

2 Month Contract (Likely to be extended)
Location: Dartford (Office-Based)
Rate: 130 per day (Inside IR35)

We are working with a leading IT services company that is seeking a Customer Service Administrator to support a large-scale Device Refresh Project. You’ll be joining a young office team and providing essential administrative support to keep the project running smoothly.

Key Responsibilities:
Making outbound calls to users to arrange device deliveries and collections
Updating and maintaining spreadsheets and project trackers
Monitoring and recording Proof of Deliveries (PODs)
Managing tickets within the customer system (ServiceNow)
Providing general administrative support as required

Skills & Experience Needed:
Strong customer service background with confidence communicating across multiple channels
Good organisation and attention to detail
Basic Excel / spreadsheet skills
BPSS clearance within the last 6 months - or willingness to be checked prior to starting

If you’re available and would like to learn more, please contact: (url removed) or (phone number removed)

ECS Recruitment Group Ltd is acting as an Employment Business in relation to this vacancy.

Now is our time to inspire the future of healthcare together.

Our client is a leading global medical technology company with over 170 years of heritage and more than 18,000 patents. With over 68,000 dedicated colleagues across more than 70 countries, they are committed to shaping the future of healthcare. We collaborate closely with customers worldwide to support the delivery of high-quality care to patients. Every day, an estimated 5 million patients benefit from our innovative technologies and services in diagnostic and therapeutic imaging, laboratory diagnostics, molecular medicine, digital health, and enterprise services. This is what truly drives us.

We are currently seeking a Quality Engineer to join our client’s team within the Point of Care Diagnostics business line.

The Quality Operations Engineer will be responsible for maintaining, monitoring, and enhancing key elements of the Quality Management System (QMS) at the Sudbury Site. This role will foster a culture of quality through education, mentoring, and leading by example.

Key Responsibilities:

• Provide quality support to the Manufacturing Operations Team.
• Support CAPA and issue resolution to ensure timely and accurate completion.
• Administer and support the deviation process, ensuring timely and precise completion.
• Manage and support the quality notification process for timely and accurate outcomes.
• Prepare for supplier, customer, regulatory, and notified body audits as required.
• Conduct internal and supplier quality audits as necessary.
• Support the change control process.
• Prepare, review, and approve or reject quality-related documentation.
• Deliver training support on key aspects of the Quality Management System.
• Generate quality-related metrics, reports, and KPIs; lead improvement projects and quality initiatives.
• Participate in SQDIP meetings, providing accurate and timely reports; take ownership of achieving target KPIs for the role.
• Utilise business systems such as CATSWEB, CERDAAC, SAP, Documentum, and Learn4U effectively.

Regulatory Requirements

• Represent the business during customer audits and regulatory inspections, demonstrating compliance with systems.
• Maintain compliance with Data Integrity Regulations, GAMP standards, 21 CFR Part 11, and applicable regulatory guidelines.

Environment, Health and Safety (EHS)

• Ensure compliance with safety, health, and environmental (SHE) legislation.
• Promote a safety-first culture, striving for zero accidents; ensure adherence to accident prevention and environmental protection regulations to maintain a safe, productive workplace free from liabilities or defects.

Teamwork and Collaboration

• Engage with project teams to support the selection, installation, and commissioning of new equipment.

Quality Assurance

• Demonstrate competence in the principles and practical application of Quality Management Systems.

Skills and Experience

• Proven ability to manage time effectively with a strong desire to succeed.
• Flexible and adaptable approach to changing workloads.
• Self-motivated, reliable, and capable of working independently.
• Effective team player with excellent communication skills across functions.
• Curious and eager to learn, with strong written and verbal communication skills.

Qualifications

• Minimum of five years’ experience in a medical manufacturing environment.
• Comprehensive knowledge of Quality Management Systems, ISO 13485, and 21 CFR 820.
• Proficient IT skills with strong knowledge of Microsoft Office applications.
• Familiarity with GDP and GMP (Good Documentation Practises and Good Manufacturing Practises).

Change your job, change your workplace, change your future

We are actively building diverse teams and welcome applications from everyone

Role: Site Services Specialist - Print & Mail
Located: London (On site)
Package: Competitive Salary, bonus plus additional benefits

About Ricoh:

Ricoh is a global technology business. As a company born in print, we design and manufacture graphic solutions that transform communications. To keep up with the pace of change in the workplace, we have built an extensive portfolio of innovative, industry-leading digital services spanning everything from Cloud & IT infrastructure solutions to process automation tools.

Everything we do is designed to help individuals achieve fulfilment through work. Through technology, we make work smarter and more creative. Enabling people to lead purposeful working lives and organisations to become more productive, sustainable and profitable.

Find out more about Ricoh Today

What you will be doing

The Site Services Specialist will provide high-quality support through the Service Bar within a professional law firm environment. This role is responsible for delivering a range of office services, document processing, and client-facing assistance to ensure smooth daily operations. The ideal candidate will have strong customer service skills, attention to detail, and proficiency in Microsoft Office applications.

• Print, Copy, Scan & Finishing: Operate and manage print services, including finishing tasks.
• Floor Walks & Printer Checks: Conduct regular checks to ensure equipment functionality and availability.
• Job Logging: Accurately log service requests and jobs in ServiceNow.
• Customer Service: Act as the first point of contact for queries, providing professional and timely assistance.
• Microsoft Office Support: Use Outlook, Excel, Word, and PowerPoint at a medium proficiency level for daily tasks.
• Courier & Post Management: Book couriers, handle special deliveries, and manage international post incoming and outgoing.
• Basic Document Processing: Perform tasks such as cropping, paginating, bookmarking, adding/removing pages, and managing track changes.
• Stationery Ordering: Monitor and order office supplies as needed.
• Porterage: Assist with moving delivering items around the office.
• General Office Services: Provide support for day-to-day office operations.
• Issue Reporting: Report technical or facilities issues promptly to the help desk.

You will ideally have

• Previous experience in office services or customer-facing roles, ideally within a law firm or professional services environment.
• Strong communication and interpersonal skills with a client-focused approach.
• Medium proficiency in Microsoft Office Suite (Outlook, Excel, Word, PowerPoint).
• Ability to multitask and prioritise in a fast-paced environment.
• Familiarity with ServiceNow or similar service management platforms is desirable.
• Attention to detail and commitment to confidentiality.
• Professional demeanour and ability to maintain discretion at all times.
• Flexibility to work onsite and adapt to changing priorities.

We are an equal opportunities employer

We are open to discussing adjustments to the recruitment process if needed. No applicant or employee will be treated less favourably than another on the grounds of a protected characteristic which are defined as sex, sexual orientation, age, disability, gender reassignment, trade union membership or non-membership, marriage and civil partnership, pregnancy and maternity, race and religion or belief.

Striving for inclusion and diversity isn t just the right thing to do. Diverse approaches, perspectives and experiences make us more innovative, lead to better decisions and help us better understand the needs of our customers.

To empower you to bring your full identity to work, we have employee-led affinity groups in LGBTQ+, gender and ethnicity that allow members to explore issues and challenges surrounding shared identities, experiences and beliefs.

Click here to learn more about life at Ricoh.

Customer Service Advisor

Newcastle upon Tyne- 5 days Onsite

Contract role (6 months)

Day rate- competitive TBD

The Role

Join our clients Customer Service Team at the Newcastle Contact Centre to support the personal lending business of a major financial Business Solutions. We are seeking professional, confident individuals to handle high-volume customer enquiries and ensure a positive experience every time.

Key Responsibilities

• Customer Support: Acting as the first point of contact for personal loan enquiries via inbound calls.
• Accuracy: Maintaining up-to-date, precise customer records in a fast-paced environment.
• Compliance: Managing sensitive data strictly in line with GDPR requirements.
• Performance: Consistently meeting KPIs, including Average Handling Time and Service Levels.

Requirements

• Mandatory: Previous experience in a Call/Contact Centre and Customer Service.
• Desirable: Background in Financial Services, Personal Loans, or CRM systems.
• Skills: Strong collaboration, professional communication, and ability to follow strict procedures.

If you interested then please apply and also please share your updated resume on yogeshwari. removed) and I will give you call back to discuss the role further.

Randstad Technologies is acting as an Employment Business in relation to this vacancy.

Location: Hybrid - 3 days on site Knutsford
Duration: 31/03/2027
Rate 426
MUST BE PAYE THROUGH UMBRELLA
Role Description:
The CyOps Analyst will support the Cyber Enhancement Programme by operationalising new detection capabilities, improving cyber readiness, and supporting endpoint and containment tooling as Tanium capabilities expand. These roles ensure T1 milestones can be met and that Detection Engineering and C2E workstreams are ready for platform go?live.
Key Responsibilities

• Operate, monitor, and triage enhanced detection outputs generated through Tanium and SIEM integration.
• Support operational readiness for new containment capabilities deployed as part of C2E workstream.
• Validate and operationalise detection content delivered via CI/CD and Tanium telemetry ingestion.
• Aid in correlating endpoint, device discovery, and telemetry insights to support investigations and incident response.
• Work with SMEs to assess gaps, document findings, and ensure operational closure of identified EDR issues.
• Support cyber incident response activities, providing endpoint expertise and rapid analysis.
• Maintain operational dashboards, reporting, and KPI tracking for CEP governance.
• Enhance playbooks and operational procedures to reflect new Tanium-driven capabilities.

Skills & Experience Required

• Experience in Cyber Operations, SOC Level 2/3, or Incident Response.
• Strong understanding of endpoint telemetry, EDR, and detection technologies (Tanium experience desirable).
• Experience triaging and analysing alerts from SIEM, EDR, and endpoint tooling.
• Ability to work across Detection Engineering and IR teams to enhance detection logic and response actions.
• Excellent analytical skills with strong attention to detail.
• Clear communication, documentation, and stakeholder engagement skills."

Senior Fraud Investigator

Start ASAP - pending security clearance Pay: £23.68 per hour Hours: Monday-Friday, 36 hours per week Duration: 6 months, possible extension Location: Charing Cross Security Clearance: SC

Role Overview

We are seeking an experienced Senior Investigator to join a leading law enforcement organisation that investigates and prosecutes serious and complex fraud, bribery, and corruption, including high-profile matters and potential Deferred Prosecution Agreements.

You will lead complex investigations, manage investigative staff, and work closely with a Principal Investigator and multidisciplinary teams to progress cases from inception to prosecution.

Key Responsibilities

• Conduct investigations in line with legislation, policy, and organisational procedures.
• Lead key lines of enquiry and investigative activity in complex, multi-strand cases.
• Line manage investigators, allocating work, supervising activity, and ensuring delivery against objectives.
• Maintain oversight of investigations, keeping matters under constant review and providing updates to senior colleagues.
• Ensure suspect and witness accounts are obtained and used strategically.
• Produce investigation and financial witness statements and give evidence in court when required.
• Manage the disclosure process in accordance with the Criminal Procedure and Investigations Act 1996.
• Manage staff performance and development, including setting objectives, providing feedback, and addressing performance issues.
• Take responsibility for the quality, timeliness, and evidential robustness of investigative work.
• Provide cover for the Principal Investigator when required.

Essential Criteria

• Experience delivering successful outcomes in complex, multi-strand investigations.
• Experience working on complex economic crime investigations.
• Experience supervising or line managing investigators.
• Strong financial literacy and ability to analyse financial records.
• Experience drafting clear and accurate witness statements or reports.
• Comprehensive knowledge of investigatory practice, including disclosure and interviewing.
• Good understanding of risk management, information security, and operational security.
• Working knowledge of the criminal justice system.

Desirable Criteria

• Experience interrogating large data sets.
• Experience using or managing eDiscovery platforms.

Qualifications

• Recognised investigative qualification or accreditation and/or
• Recognised accountancy qualification and/or
• Demonstrable experience leading serious and complex crime investigations.

Adecco acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. The Adecco Group UK & Ireland is an Equal Opportunities Employer.

By applying for this role your details will be submitted to Adecco. Our Candidate Privacy Information Statement explaining how we will use your information is available on our website.

IT Support Operator

Location: Cardiff Gate (2-3 days p/week in the office)
Hours: 35 hours per week (shift pattern between 8:00am 5:00pm)

The Role

An established UK organisation is looking for an IT Support Operator to join its IT Service Desk team.

You ll provide first-line technical support to internal users, ensuring IT systems run effectively and colleagues receive reliable, professional assistance. This role sits within a collaborative IT function and involves working closely with infrastructure, applications and security teams to maintain smooth day-to-day operations.

Key Responsibilities

• Deliver first-line IT support via phone, email, self-service portal and Microsoft Teams
• Log, manage and resolve incidents and service requests through an ITSM system
• Troubleshoot hardware, software and access-related issues
• Support Microsoft 365 applications and Windows 11 environments
• Configure and maintain laptops, mobile devices and peripherals
• Create and manage user accounts and permissions (Active Directory / M365)
• Escalate complex incidents to specialist IT teams where required
• Maintain accurate ticket documentation and update knowledge articles
• Promote IT security best practice and support users with guidance
• Assist with device deployments, project work and occasional organisational events

Technology Environment

• Windows 11
• Microsoft 365
• Active Directory
• SCCM
• Microsoft Endpoint Manager / Intune
• Android devices
• Remote support tools

About You

• Experience working in an IT Service Desk or technical support role
• Strong customer service and communication skills
• Comfortable supporting non-technical users
• Good troubleshooting and problem-solving ability
• Able to manage multiple priorities in a busy support environment
• Understanding of IT security and data protection principles

Working Arrangements

• 35-hour working week with shifts between 8am and 5pm
• Hybrid role but may be 5 days p/week intially in Cardiff
• Occasional UK travel and overnight stays may be required

Our client is currently looking to recruit a Systems Analyst on an initial 3 month contract.

System Administrator Housing Systems (Civica Cx)
£350 - £450 per day inside IR35
Warwickshire - 1 day a week, 4 from home

Are you an experienced systems professional with exceptional attention to detail and a background in housing or financial systems?
We are seeking a confident and organised System Administrator to support the effective operation, maintenance and ongoing development of our Housing Information Management System (Cx) and associated income processes. This is a pivotal operational role within the Communities & Homes service, ensuring the accurate processing of housing income (circa £18m annually), maintaining system integrity, and supporting colleagues across Housing, Income, Finance and IT.

You will take responsibility for the day-to-day administration of the housing system and associated financial processes, ensuring accuracy, compliance and continuity of service delivery.

Financial & Income Processing

• Managing daily Direct Debit and BACS files (ARUDD, ADDACS, AUDDIS)
• Processing cash payment files
• Uploading daily and monthly Universal Credit files
• Maintaining reconciliation spreadsheets and resolving discrepancies
• Monitoring and investigating suspense accounts
• Liaising with Income, Benefits and Finance teams to resolve payment issues

System Administration

• Day-to-day administration of the housing system (Cx), including user accounts and permissions
• Monitoring scheduled processes and resolving failures
• Supporting system upgrades and configuration updates
• Working with IT and third-party suppliers to resolve technical issues
• Supporting system interfaces between housing and corporate systems

Reporting & Data

• Producing statutory and operational returns (CORE, LAHS, LADR, NFI)
• Supporting KPI reporting requirements
• Maintaining and improving data quality and report accuracy
• Assisting with regulatory compliance and audit requirements

About You
We re looking for a methodical and analytical professional who thrives on accuracy and continuous improvement.
You will:

• Have experience administering housing, income or financial systems
• Understand Direct Debit and BACS processing
• Be experienced in financial reconciliations
• Be confident investigating discrepancies and resolving complex issues
• Manage competing deadlines and cyclical workloads effectively
• Communicate clearly with both technical and operational colleagues
• Possess strong Excel and reporting skills

Experience within local government or social housing would be highly desirable.
This is a fantastic opportunity to join an established organisation with potential for contract extensions.

Role / Job Title:PAS-X MES Application Support Analyst L1/L2 (SaaS)Location:London - 1 day a week (but should be available when needed)The RoleManufacturing Data Management project for a global FMCG client as a Platform architect.Your Responsibilities(Up to 10, Avoid repetition)1. L1/L2 Application Support

• Provide L1/L2 support for PAS-X MES across EU manufacturing sites
• Act as first point of contact for MES incidents, alarms, and service requests
• Perform incident triage, analysis, resolution, or escalation within agreed SLAs

2. Incident & Problem Management

• Log, manage, and resolve incidents using Pulse
• Support deviation, investigation, and root cause analysis activities where required
• Coordinate with PAS-X vendor (L3) for product-level or complex issues
• Maintain complete, accurate, and auditable ticket records

3. Change, Release & Upgrade Support

• Support PAS-X releases, patches, and upgrades under GE HealthCare change governance
• Perform impact assessments and support validation activities (IQ/OQ/PQ as applicable)
• Support regression testing, cutover, and post-release hypercare

4. Manufacturing & MES Operations Support

• Support shop-floor operations including EBR execution, weighing, dispensing, and packaging workflows
• Support integration points with SAP and Historian related systems
• Assist sites during critical manufacturing windows where required

5. GxP & Compliance Support

• Operate in compliance with GxP, data integrity, and validation requirements
• Support audits, inspections, and compliance reviews as required
• Ensure all incidents and changes are documented for audit readiness

6. Stakeholder & Vendor Coordination

• Act as operational interface between manufacturing sites, IT, QA, and PAS-X vendor
• Provide regular status updates and participate in operational and governance calls

7. Knowledge Management

• Maintain MES support documentation, runbooks, and known error records
• Support knowledge transfer and stabilization activities across regions

Your ProfileEssential Skills / Knowledge / Experience

1. 5 10 years of experience supporting MES platforms (KOERBER PAS-X preferred)
   Hands-on experience with PAS-X MES in regulated manufacturing environments
2. Strong understanding of EBR, shop-floor processes, and MES integrations
3. Experience supporting SaaS / platform-based MES solutions
4. Strong understanding of ITIL-based incident, problem, and change management
5. Experience working with EU manufacturing sites and QA teams

Desirable Skills / Knowledge / Experience

1. Experience in pharma or life sciences manufacturing
2. Exposure to SAP, Historian, LIMS, and automation systems
3. Experience supporting PAS-X packaging and process lines
4. Experience with ITSM tools such as ServiceNow or Jira

IT Support Engineer Manchester 6 months My client is looking for an IT Support Engineer to manage BAU workload and provide 1st and 2nd line support. The ideal candidate will be personable with a professional passion for providing high quality IT support services. Key responsibilities of the IT Support Engineer: - Provide 1st and 2nd line support to end users across hardware, software, Infrastructure and network. - Troubleshoot and resolve issues related to M365, Active Directory and Windows 11. - Diagnose and resolve network connectivity and troubleshooting issues. - Contribute to technology updates and develop ITIL best practices. - Providing support with additional IT projects. IT Support Engineer Experience/Technologies: - Understanding of Windows 10/11 operating system Administration and support - Microsoft Stack including Office 365 and Intune Administration and support - Active Directory Administration and management - Using ticketing system to respond to portal requests User support - Communication and interpersonal skills. The successful IT Support Engineer candidate will be commutable 5 days a week to Manchester. *Apply now to speak with VIQU IT in confidence. Or reach out to Matt Farrell via the VIQU IT website.* *Do you know someone great? We ll thank you with up to £1,000 if your referral is successful (terms apply).* *For more exciting roles and opportunities like this, please follow us on IT Recruitment*

Job Title: Data Engineer (BD&A - DAPM Live Service Support)

Max Rate: £430 per day inside ir35

Duration: 6 months

Location: Telford/hybrid 2 days per week onsite)

Active SC security clearance is required for this role.

Job Description:

We are seeking an SC Cleared Live Support & Monitoring Engineer to provide operational support across a suite of data integration and analytics platforms. This role focuses on maintaining stability, enhancing monitoring capability, and improving service visibility through consolidated dashboards and intelligent alerting.

Responsibilities

Live Service Support

Provide ongoing live support across platforms including:
Denodo
Talend
Pentaho Data Integration (PDI)
Git
MySQL
Amazon Redshift
Investigate, diagnose and resolve incidents across data and integration services
Work closely with technical teams to maintain service availability and performanceGrafana Monitoring & Alerting

Design, create and consolidate Grafana dashboards
Transform multiple independent dashboards into a unified Live Service view with drill-down capability by service
Gather monitoring requirements from stakeholders
Configure and implement alerting for legacy services that currently lack monitoring
Deliver fit-for-purpose alert thresholds and notifications aligned to operational needs
Improve visibility, observability and proactive incident management

Experience & Skills

Essential

Active SC Clearance
Experience supporting live production environments
Exposure to data platforms such as Denodo, Talend, PDI, MySQL or Redshift
Experience creating or maintaining Grafana dashboards
Understanding of monitoring, alerting and service observability principles
Strong troubleshooting and analytical skills
Ability to gather requirements and translate them into monitoring solutionsDesirable

Experience configuring Grafana alerting
Experience working in a client-side environment
Knowledge of legacy system monitoring uplift
Familiarity with Git version control