Controls Engineer / Control Systems Engineer

Location: Leeds, West Yorkshire (LS10)
Salary: £40,000 - £55,000 + Benefits

A growing machinery manufacturer specialising in automated production and process equipment is looking to recruit a Control Systems Engineer / Controls Engineer to join their engineering team in Leeds.

The company designs and manufactures bespoke automated production and process machinery used within manufacturing and industrial processing environments. This position is open due to continued growth and increasing demand for the company’s automation systems.

The role will focus on the programming, development and commissioning of PLC-controlled machinery, working closely with mechanical and electrical engineering teams to deliver reliable automation solutions.

The Role

Working from the Leeds office, you will be responsible for the control system design, programming and commissioning of automated production and process machinery.

Typical responsibilities include:

* Programming PLC controllers (Programmable Logic Controllers) used within automated machinery

* Developing HMI interfaces to allow operators to control and monitor machine performance

* Programming PLC systems using platforms such as Siemens TIA Portal / Step 7, Omron, Rockwell (Allen-Bradley)

* Developing ladder logic, structured text and function block programmes

* Commissioning PLC-controlled machinery during factory acceptance testing and on-site installation

* Integrating sensors, actuators and instrumentation within automated systems

* Designing and supporting electrical control systems and machine control architecture

* Supporting the development of flexible control systems that can be adapted for different production requirements

* Supporting remote diagnostics and troubleshooting of PLC and HMI systems

* Working closely with mechanical, electrical and process engineers during machine development

* Supporting on-site commissioning and system integration with customer production equipment

* Commissioning machinery primarily in-house with limited site travel.

About You

We are interested in engineers with experience developing PLC and HMI control systems used within automated machinery or industrial manufacturing environments.

Key requirements include:

* Degree or HNC in Electrical Engineering, Control Engineering, Automation Engineering, or equivalent experience

* Experience programming PLC controllers (Programmable Logic Controllers)

* Experience developing HMI systems

* Experience programming and commissioning PLC-controlled machinery

* Understanding of electrical control systems used in automated equipment

* Experience integrating sensors, instrumentation and machine safety systems

* Strong troubleshooting and problem-solving ability

* Ability to work both independently and as part of a multidisciplinary engineering team

You may currently work as a: Control Systems Engineer, Controls Engineer, PLC Engineer, Automation Engineer, Electrical Controls Engineer, Control Engineer, or Electrical Design Engineer.

Salary & Benefits

* £40,000 – £55,000 (salary level depending on experience)

* 25 days holiday + bank holidays

* Flexible start and finish times

* Paid PLC training courses

* Half Day Finish on Friday’s

The recruitment process for this position is being managed by SimWest Engineering Recruitment, a specialist consultancy focused on engineering and manufacturing recruitment across the UK.

All applications will be reviewed by SimWest Engineering Recruitment and suitable candidates will be contacted to discuss the opportunity in more detail before progressing to interview with the client.

SimWest works closely with machinery manufacturers, OEMs and Food/FMCG manufacturing businesses to identify engineers

Our Client provides specialist mechanical and electrical testing, commissioning, validation, verification and other associated services to customers throughout the UK. Since 2010 the company has carried out works for commercial office landlords and tenants, design and build contractors, developers and property owners. Their highly skilled team have a wide range of experience and have worked on some of the UK’s most innovative projects.

The company expects their Commissioning Engineers to ensure that all MEP (Mechanical, Electrical and Public Health) systems are commissioned safely, efficiently, and to the design intent, ensuring optimal operation, integration and compliance with project specifications and regulatory requirements.

Key Responsibilities:

* Plan, execute and oversee the commissioning of MEP systems, including HVAC, lighting, power, BMS, fire alarms, plumbing, and drainage.

* Coordinate with installation teams, subcontractors, design consultants, and the main contractor to develop and implement commissioning plans.

* Produce and maintain commissioning documentation including method statements, test scripts, test results, and commissioning programmes.

* Perform functional performance testing and pre-commissioning activities (e.g. pressure testing, flushing, equipment energisation, etc.).

* Troubleshoot and resolve MEP system issues identified during commissioning.

* Ensure all systems are tested and commissioned in accordance with current standards (BS, CIBSE, BSRIA, etc.).

* Participate in witness testing with clients, third parties and certifying bodies.

* Handover systems with complete commissioning documentation and O&M manuals.

* Ensure health and safety regulations are adhered to during all commissioning activities

Qualifications and Certifications:

* NVQ Level 3 or higher in Mechanical or Electrical Engineering (or equivalent).

* ECS/JIB Card (Technician or Approved Grade).

* CSCS or equivalent site safety certification.

* SMSTS or SSSTS (desirable).

* Relevant commissioning certifications (e.g. BSRIA Commissioning Management training, CSA Grade 3 or higher).

* PASMA/IPAF (advantageous).

Skills & Experience:

* Proven experience commissioning complex MEP systems in commercial, residential, healthcare and/or industrial environments.

* Strong understanding of BMS integration, controls strategy, and mechanical/electrical system interactions.

* Familiarity with project commissioning tools (e.g. CxAlloy, Komply, Zutec).

* Ability to read and interpret mechanical and electrical schematics and technical drawings.

* Excellent documentation and reporting skills.

* Strong communication and coordination abilities across multi-disciplinary teams.

* Proactive, problem-solving mindset with a focus on quality and compliance.

In addition to fully trained Commissioning Engineers, the company is also happy to consider applications from Junior Engineers looking to gain further knowledge and qualifications in specialist commissioning. All applicants, regardless of experience, must have a valid UK drivers licence and be able and willing to pass security clearance checks for access to restricted sites

Senior Design Engineer required for an leading precision engineering company, serving industries such as Nuclear, Oil & Gas, Food & Beverage and Chemical Processing with critical components from multiple global locations including 4 UK sites.

This opportunity is based in Huddersfield, meaning the successful Senior Design Engineer will be able to commute from surrounding areas.

Key Responsibilities of the Senior Design Engineer will include;

Interpret technical specifications for designs that meet both contractual obligations and service performance requirements.
Select appropriate materials and perform engineering calculations to accurately size valve components
Review and verify the design work produced by other team members to ensure accuracy and quality
Prepare comprehensive design reports and offer technical input to support sales and tender processes
Contribute to the development of new products and the integration of emerging technologiesFor the role of Senior Design Engineer we are keen to receive applications from individuals who have;

Experience as Senior Design Engineer or similar within an Engineering or Manufacturing environment - Ideally 3-5 years’ experience
Degree or HND in a relevant engineering discipline (or equivalent experience).
Experience tracking financial elements of a project
knowledge of design standards (API, ASME; ASME III desirable)
Relevant project management related qualificationsSalary & Benefits on offer for the successful Senior Design Engineer;

Competitive salary (depending on experience)
26 Days annual leave + Bank holidays
Up to 8% employer contributions
Mon - Thur 8am - 4.30pm
Fri - 8am - 1pm
Enhanced company sick pay
Optical vouchers, employee assistance, Discounts, cash back and offersTo apply for the Senior Design Engineer position, please click “Apply Now” and attach an updated copy of your CV. Alternatively, please contact Alex Feather at E3 Recruitment for more information

CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management.

We are recruiting a Maintenance Engineer to join our team in the North! This is a mobile role based in the Leeds area.

Role Summary:

React to breakdown maintenance requests within the required SLA’s.
Ensure routine maintenance is carried out to a high standard.
Test and diagnose power quality issues.
Weekly / monthly PPMs
Liaise with sub-contractors as required for repairs & ensure works have been carried out in line with CBRE policies.
Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly.
Determine the root cause and action items required to restore availability and prevent a recurrence.
Accurately maintain site work logs & paperwork.
Other duties as and when required.

Hours

Monday - Friday.
8am - 5pm.
Overtime & Weekend flexibility needed.
On-Call schedule available.
Qualifications & Experience

18th Edition Electrical Wiring Regulations
Experience working with building management systems including fault finding and operator use
FM experience advantageous
Knowledge of Health & Safety policies.
Email for more information or apply today!

EQUAL OPPORTUNITIES

We are an equal opportunities employer and do not discriminate on the grounds of gender, sexual orientation, marital or civil partner status, pregnancy or maternity, gender reassignment, race, colour, nationality, ethnic or national origin, religion or belief, disability or age

Full time, Permanent, On site
Location – Daldowie
Salary £43,459.08

Closing date:20 January

Who we are:

We’re not just talking about making a difference, we’re making it happen. We generate dispatchable, renewable power and create stable energy in an uncertain world. Building on our proud heritage, we have ambition to become the global leader in sustainable biomass and carbon removals.

You’ll be joining our teams of practical doers, future thinkers and business champions. We’re enabling a zero carbon, lower cost energy future for all, and working hard to decarbonise the planet for generations to come.

About the role:

As an EC&I Technician, you’ll provide electrical, control and instrumentation support to the plant mainly focussed on planned and unplanned maintenance activities. You’ll also provide some support on modification and replacement projects.

Based in Uddingston near Glasgow, Daldowie Treatment Works is one of the largest plants of its type in Europe. For nearly 25 years the plant has focussed on creating wdf pellets from sewage sludge reducing environmental impacts as well as creating a new fuel source replacing the need to burn fossil fuels.

Day to day you’ll support the process by providing timely repairs to breakdowns and carrying out planned maintenance activities including instrumentation calibrations. You’ll ensure that all work is managed and recorded correctly to maintain compliance, inspiring safe ways of working across the site, setting a high standard of EC&I engineering activity, and supporting in rolling out new processes, systems, and ways of working to your colleagues on site.

You’ll be joining a tight knit, dedicated team based on site, who are also part of a larger group with a wide support network.

Who we’re looking for:

You’ll need to have experience in solving problems and being a strong communicator to be able to persuade and influence others.
You should be educated to at least ONC level in Electrical or Instrumentation Engineering and should have served a recognised Apprenticeship.

Specifically, you’ll need plant experience in the maintenance, repair and installation of electrical equipment, including but not restricted to, 3 phase motors and associated switchgear, variable speed drives, soft starts, circuit breakers, motor control centres and 3 phase and single-phase distribution systems.

You’ll be able interpret schematic drawings, single line diagrams and PLC ladder logic.

Ideally, you’ll also have process plant experience in the maintenance, repair, installation and calibration of plant instrumentation and control systems including, but not restricted to, systems for the measurement of temperature, pressure, level, flow, oxygen, and ph.

Rewards and benefits:

As you help us to shape the future, we’ve shaped our rewards and benefits to help you thrive and support
your lifestyle. If successful in this role you’ll get:
·         A discretionary bonus depending on company performance 
·         SAYE (Sharesave): discretionary scheme from time to time
·         Personal accident cover
·         Group personal pension plan
·         Holiday

• 36 days
  ·         Reimbursement of the cost of your annual membership of one relevant and appropriate professional body

We’re committed to making a tangible impact on the climate challenge we all face. Drax is where your individual purpose can work alongside your career drive. We work as part of a team that shares a passion for doing what’s right for the future. With Drax you can shape your career and a future for generations to come.

Together, we make it happen.

At Drax, we’re committed to fostering an environment where everyone feels valued and respected, regardless of their role. To make this a reality, we actively work to better represent the communities we operate in, foster inclusion, and establish fair processes. Through these actions, we build the trust needed for all colleagues at Drax to contribute their perspectives and talents, no matter their background. Find out more about our approach here.

How to apply:

Think this role’s for you? Click the ‘apply now’ button to begin your Drax journey.
If you want to find out more about Drax, check out our LinkedIn page to see our latest news.

We understand that you may have some additional questions about the role. If you’d like to have a confidential chat to discuss the role in more detail, please email careers@drax.com

We reserve the right to close roles early when the particular role and / or location has had sufficient applications.

Our client is one of the largest facilities management and maintenance contractors in the UK, offering market leading opportunities for talented professionals looking for long term career progression.

Due to an increase in upcoming projects, there is now a need for an Electrical Maintenance Engineer to join this highly successful and forward-thinking organisation.

We are looking for an Electrical Maintenance Engineer who wants to work in a diverse role where no two days are the same.

The Electrical Maintenance Engineer, will be responsible for:

*

Carrying out Planned Preventative Maintenance (PPM) and reactive maintenance.

*

Ensuring Health & Safety standards are maintained at all times.

*

Liaising with engineers and subcontractors to support smooth site operations.

*

Providing proactive client liaison, addressing concerns or escalating them to management when needed.

*

Accurately completing all work-related documentation on time.

To be successful for this Electrical Maintenance Engineer role you must have:

*

Electrical Qualifications (City & Guilds, NVQ, etc.)

*

Previous relevant experience providing Electrical maintenance in a large, complex environment.

*

Basic to intermediate IT skills with experience updating records.

*

Strong communication skills at all levels, both written and verbal.

If you feel you have the necessary skills set and experience to perform this Electrical Maintenance Engineer role, and you are interested in an opportunity offering unparalleled career development, please apply now

Location: Wakefield
Shift Pattern: 4 on / 4 off (Days & Nights – 6am–6pm / 6pm–6am)

Holidays: 21days
Salary: £53-56k DOE basic (average earnings circa £56-57k)
Start Date: ASAP

An excellent opportunity has arisen for a Multi Skilled MaintenanceEngineer to join a well-established site operating within a highly automated environment. This role would suit a maintenance engineer looking for long-term stability, strong earning potential, and the chance to work within a close-knit engineering team.

The Role

As a Multi Skilled Maintenance Engineer, you will be responsible for planned and reactive maintenance across a range of automated equipment. The maintenance engineer will be assisting with mechanical and electrical PPM and reactive breakdowns.

Key Responsibilities:

Carrying out PPMs as a maintenance engineer
Reactive breakdown fault-finding
Recording maintenance activity on a CMMS system
Mechanical fault-finding and like-for-like component replacement
Electrical fault-finding using drawings and test equipment
Occasional installation and improvement work
About You

This position is ideal for a maintenance engineer with a strong mechanical and electrical background.

Essential:

Mechanical or Electrical qualification i.e apprenticeship/NVQ Level 3 equivalent
Proven experience as a maintenance engineer in an industrial or automated environment
Multi skilled fault-finding capability
Confident using a multi meter
Able to work independently and as part of a team
Desirable attributes from the maintenance engineer:

Experience within automated FMCG/manufacturing
Siemens PLC fault-finding experience
What’s on Offer

£53-56k basic salary for the maintenance engineer role
Average earnings circa up to £56-57k
Overtime available (2.0 Sundays, 1.5x additional rates)
21 days annual leave
Standard pension and life assurance
Ongoing training and development
Stable shift pattern and supportive engineering team
ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

ASRS (Automated Storage Retrieval System) Technician 2 (Multiskilled) - Wakefield

Permanent – Full time

Shift Pattern: Continental Shift Pattern: 7 pm– 7am  (3 Days on / 3 days off / 3 nights on / 3 nights off).  (+ 23 Holidays)

Starting Salary: £55, 182

Structured Career Development + Annual performance related pay bonus and pay reviews + Share scheme + Competitive pension contributions + Laundered uniform and all safety equipment provided + Range of flexible benefits and Corporate discounts + Free parking + Overtime available + Free hot and cold drinks and subsidised canteen + Excellent parental benefits + Flexible working.

What you become part of:

Wakefield Distribution Centre is a 24/7 operation, our Automated Storage and Retrieval System (ASRS) warehouse holds 28,000 pallets, alongside a racked and block-stacked conventional warehouse of 12,000 pallets. The combined typical annual throughput is over three million pallets. Every 24 hours we expect to receive around 5,000 pallets from the on-site manufacturing operation, as well as handling around 360 vehicle movements at peak.

What to expect:

As a Multi Skill engineer based in the CCEP largest GB warehouse, you will be responsible for the efficient operation of the automated storage retrieval systems, including: maintenance, repairs, and attending to breakdowns. You will work as one of four shift-based teams of three engineers, that collective provide 24/7 operational cover, overseen by the Distribution Reliability Manager.

Your core responsibilities within the ASRS:

Safety:

• Operate within the Company Health and Safety management system
• Collaboration with team of site and centrally base H&S representatives.
• Responsible for critical inspections and defect reporting.
• Ensure the safe maintenance and repair of both ASRS and individual equipment.
• Uphold a safe system of work, adhering to SOP’s e.g lockout tagout procedures.
• As part of the role, you will be trained as a member of the site emergency team, this includes engaging in rescue work at height and duties of a first aider.

Operation:

• You will be expected to oversee the execution of an advanced maintenance plan while ensuring that direct and indirect KBIs are met.
• Perform both preventative and corrective maintenance on both electrical and mechanical systems (20/80 elec/mech) to guarantee that the warehouse’s various components continue to function as intended.
• You will complete a site based electrical competency assessment and area familiarization before commencing work.
• Make efficient use of our Central Maintenance Management System
• Collaborate with a network of local and external engineering teams.
• Promote operational excellence by sharing best practices
• Innovate and enhance current systems and procedures.
• Providing technical assistance for product/equipment adjustments.

Skills & Prerequisites:
Apprentice Served in Mechatronics (Will also consider Electrical Engineering Apprenticeship with quantifiable Mechanical Experience Or Mechanical Engineering Apprenticeship with quantifiable electrical experience and willing to undertake the Electrical qualification).

*Note: We will not consider a Level 3 electrotechnical Buildings & Structures apprenticeship on it’s own

OR

Level 3 NVQ or above in  Mechanical and/or Engineering, alongside an additional academic qualification (CITY&Guilds 3 or above / BTEC / HNC / HND / Degree).

*You will be expected to undertake both a Mechanical and Electrical skills assessment during interview to confirm skill base.

• Proven knowledge and experience working within both Mechanical and Electrical Engineering
• Ability to work at height – up to 100ft (vertical climb in restricted spaces)
• Experience in 3 phase electrical systems and mechanical drive systems.
• Previous record of Process Compliance and Fault-Finding experience on both Mechanical and Electrical equipment.
• Understanding of the in/output of programable logic controllers (PLC)
• Awareness of PUWER / LOLER / LOTO

The closing date for applications is 18/03/26. We reserve the right to close this advertisement early if we receive a high volume of applications. To ensure you are considered for this role, we encourage you to apply as soon as possible.

We are Coca-Cola Europacific Partners (CCEP) – a dedicated team of 42,000 people, serving customers in 31 countries, who work together to make, move and sell some of the world’s most loved drinks.

We are a global business and one of the leading consumer goods companies in the world. We help our 2.1 million customers grow, and we are constantly investing in exciting new products, innovative technologies and fresh ideas. This helps us to delight the 600 million people who enjoy our drinks every day.

From gender, age and ethnicity to sexual orientation and different abilities, we welcome people from all walks of life and empower unique perspectives. We recognise we’ve got some way to go, but we’ll get there with the support of our people. It’s them who drive our future growth. To find out more about what it’s like to work at and our culture we would welcome you to speak to one of our employees on our live chat platform, just click here to speak to an insider.

We recognise some people prefer not to participate in alcohol related sales, interactions, or promotions. If that’s true for you – please raise this with your talent acquisition contact who will advise you on whether this role includes activities related to our alcohol portfolio.

Role: Mechanical Maintenance Engineer

Type: Permanent

Location: West Yorkshire

Salary: Competitive + Overtime
Shift Pattern: 3‑shift rotation (Mon-Fri) + Occasional voluntary weekends:

06:00-14:00
14:00-22:00
22:00-06:00

About the Role:

SRG are seeking a proactive Mechanical Maintenance Engineer to join a successful and growing client based near Leeds, West Yorkshire. Reporting to the Engineering Leader, you will play a key role in ensuring equipment reliability, supporting production uptime and maintaining a safe working environment.

This is an excellent opportunity for an engineer looking to build their skillset, with extensive training and development available.

Key Responsibilities:

Conduct routine inspections and deliver effective PPM activities
Respond promptly to time‑critical breakdowns to minimise downtime
Ensure all work is carried out safely, following permit-to-work, compliance and site safety procedures
Accurately log activities, faults, and maintenance tasks, ensuring smooth shift handovers
Collaborate closely with Operations teams and external contractors to resolve issues efficiently.

Criteria:

Mechanical qualification
Experience working with pumps, gearboxes, pneumatics, steam systems, filling machinery.

Available to you:

All tools provided
Comprehensive in‑house training and induction
Development courses including:
Food Safety
IPAF
PASMA
Boiler Operator Course
Confined Space Entry
Lean Six Sigma (Yellow Belt)

If interested, please apply or contact Julia for more information: / (phone number removed)

Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy

Howard Civil Engineering are currently seeking a site engineer with a background in earthworks, remediation and contamination.
Due to additional work awarded on one of our most prestigious projects, Skelton Grange, our site team require additional engineering support.

The project consists of earth remediation, contaminated water, underground demolition, contaminated soil and treatment of mine workings.

We are seeking an engineer to join the established site team. We require the candidate to have held the position of site engineer for at least 5 years and hold a HND in civil engineering or similar.

Roles and Responsibilities:

• Assist in the development and review of earthworks designs, including cut and fill balance, slope stability, and drainage considerations.

• Interpret design drawings, specifications, and ground investigation data to plan site operations.

• Contribute to the preparation and review of method statements, risk assessments, and Inspection and Test Plans (ITPs) for earthworks activities.

• Oversee the execution of earthworks operations including excavation, filling, compaction and stabilisation.

• Ensure works are carried out in accordance with earthworks standards.

• Coordinate site testing in collaboration with compaction control tests.

• Review and record test results, identifying trends and ensuring compliance with project specifications.

• Maintain accurate daily records of works, inspections, and test data for quality assurance and audit purposes.

• Ensure earthworks operations comply with CDM Regulations, company safety procedures, and sitespecific health and safety plans.

• Promote a culture of safety, environmental stewardship, and sustainability within the site team.

• Identify and manage risks such as slope instability, soft ground, or contaminated materials.

• Support environmental controls including dust suppression, sediment control, and waste management.

• Ensure accurate setting out of earthworks features such as formation levels, embankments, and drainage interfaces.

• Check and verify survey data and asbuilt levels.

• Ensure compliance with tolerances and alignment requirements specified in the project drawings.

• Liaise daily with site management, design teams, and client representatives to coordinate works and resolve technical issues.

• Provide updates on progress, quality, and material performance during site meetings.

• Communicate clearly with suppliers and haulage contractors to ensure efficient material delivery and placement.

• Maintain accurate records of site activities, including material source approvals, test results, and inspection reports.

• Contribute to asbuilt records.

Requirements:

• HND in Civil Engineering Level 4 or above

• Valid CSCS card (qualified persons)

• SMSTS / SSSTS

• Awareness of hazardous materials such as Asbestos.

• Experience in remediation and earthworks projects.

• Strong knowledge of civil engineering principles, practices, and construction methodologies.

• A strong knowledge of contamination within land, soil and water.

• Knowledge and experience of setting out equipment and GPS

• At least 5 years in similar role with a proven record of development (Trainee, Engineer)

• Knowledge of relevant regulations and compliance standards

Job title: Preventative Maintenance Engineer

Location: Leeds

Salary: £29,500 per annum. Mon – Fri role, no required weekend work + vehicle + pension + full training + other benefits

This is a roasting hot opportunity to join one of the leading names within the coffee industry as we are seeking a Preventative Maintenance Engineer for Leeds. Salary is to £29,500 per annum + vehicle + pension + other benefits. Mon – Fri, no required weekend work.

Preventative Maintenance Engineer - Requirements

A highly motivated, well presented and friendly individual with a desire to join the coffee industry.

With a mechanical background, you will be working as part of a target driven team to ensure high standards of preventative maintenance and repair of coffee machines.

The Role:

* Carry out preventative maintenance service contracts and deliveries across a large geographical area

* Test completed machines in line with company guidelines

* Work proactively with the central call centre, by taking day to day instructions, keeping them updated, so waiting customers are kept informed.

* Daily update of Production Stats to ensure performance is in line with productivity targets, escalating any issues/concerns early to the Regional Service Manager

* Keep in good working order all tools, equipment and vehicles supplied by the company, reporting any faults, breakages or equipment failures to your line manager daily

* Ensure at all times that the Health and Safety policy is adhered to

* Co-operate with other employees in a professional and friendly manner

The Person:

* A confident individual with a passion for customer service

* Excellent understanding of coffee quality and associated equipment

* Demonstrates strong problem-solving skills with an electrical mechanical background

* Computer literate with a clean driving licence

* Self-motivated with a flexible approach to work, location and hours

Salary: £29,500 + Company Vehicle + 25 days Holiday + other Company Benefits

If you feel this role to be a good match for your skills and experience, we look forward to hearing from you

Industrial Refrigeration Engineer - Service & Maintenance
Location: Yorkshire & Surrounding Areas (home-based with regional travel)
Salary: £38,000-£56,000 DOE
Hours: 40 per week | Door-to-Door Travel Paid
Standby: 1 in 8 Rota
We are recruiting on behalf of a market-leading industrial refrigeration and maintenance provider operating across the UK. Due to continued growth, they are urgently looking to appoint an experienced Refrigeration Engineer to cover Yorkshire and surrounding areas.
This is a field-based role focused on service, maintenance and reactive breakdown support across a portfolio of industrial and commercial sites.

The Role

You will be responsible for carrying out planned preventative maintenance and attending breakdowns on industrial refrigeration and chiller systems. The position offers a high level of autonomy and requires a strong technical skillset combined with excellent fault-finding ability.
Travel time is paid door to door, and you will be part of a structured 1 in 8 standby rota.

Key Responsibilities

Carry out PPM and reactive maintenance on industrial refrigeration plant.

Diagnose and repair faults efficiently and safely.

Complete service documentation and job reports accurately.

Communicate technical findings clearly with clients and internal teams.

Ensure all work is completed in line with current health and safety standards.

The Package

Basic salary £38,000-£56,000 depending on experience.

40-hour working week.

Door-to-door travel paid.

1 in 8 standby rota with £700 standby payment per week.

£35 per call-out.

Overtime paid at time and a half, rising to double time after midnight.

Training and development support available for the right candidate.

About You

Experience working on refrigeration systems (industrial experience desirable but not essential).

Relevant refrigeration qualifications and F-Gas preferred (training can be provided).

Strong fault-finding and diagnostic skills.

Full UK driving licence.
If you are a Refrigeration Engineer based in Yorkshire looking for a well-paid role with strong standby earnings and long-term progression, apply now for a confidential discussion.

Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

North Yorkshire

Interim assignment
Inside IR35
£29.76 per hour (PAYE)

The Role

We are supporting a FMCG manufacturing site with the appointment of an Interim Engineering Manager to lead the site engineering function on a temporary basis. This role will take ownership of engineering performance, maintenance strategy, team leadership, and delivery of ongoing engineering and improvement activity.

The assignment has no fixed end date and will continue in line with business requirements. The successful interim will be expected to make an immediate impact within a fast paced, high speed manufacturing environment.

Key Responsibilities

Provide hands on leadership to the site engineering team, including multi skilled engineers and contractors.
Ensure engineering resource and shift cover supports a continuous operation.
Take ownership of preventative and reactive maintenance strategies across production and utility assets.
Drive rapid response to breakdowns, minimising downtime and production impact.
Lead root cause analysis and implement long term corrective actions.
Oversee ongoing engineering activity including equipment upgrades, installations, and commissioning.
Manage engineering projects in collaboration with OEMs and external contractors.
Ensure full compliance with health and safety, food safety, and engineering legislation.
Lead risk assessments, method statements, and safe systems of work.
Work closely with Production and Quality teams to improve OEE, reliability, and line performance.
Maintain accurate maintenance records, asset registers, and schedules via the CMMS.
Manage engineering KPIs, budgets, spares, and contractor spend.
Provide clear performance and progress updates to senior leadership.
The Interim

Proven experience operating as an Engineering Manager or Senior Engineering Leader within FMCG or food and drink manufacturing.
Strong multi skilled engineering background with mechanical and electrical capability.
Experience with high speed, automated production lines and PLC controlled equipment.
Comfortable stepping into live environments and delivering impact quickly.
Strong knowledge of health and safety legislation and food safety standards including HACCP and GMP.
Confident leading teams, contractors, and senior stakeholders.
Delivery focused, pragmatic, and commercially aware.
Keywords
Interim Engineering Manager, Contract Engineering Manager, FMCG, Food, Drink, Bottling, Automation, Maintenance, Reliability

Please contact (Ryan Taylor at Winsearch for more information)

Winsearch acts as an employment agency for permanent staff. We recruit for roles based in Engineering & Manufacturing, Food & Drinks, Pharmaceutical, Supply Chain & Procurement and Professional Services.

View our latest jobs today on our website (url removed) follow us on LinkedIn.

FoodH

Our clients and their customers come from diverse backgrounds and so do we. We hire our people from various walks of life, each of whom make our company stronger with their talent, uniqueness, and expertise. This is what makes our company special; if you want to help us grow and take this ethos to our clients, then we cannot wait to collaborate with you!

The UK has now left the European Union. Any EU, EEA or Swiss citizens living in the UK that wish to remain in the UK post Brexit need to apply to the EU Settlement Scheme. Although the closing date for applications was 30th Jun 2021, if you have not yet applied but believe that you would qualify under the EU Settlement Scheme, the Home Office have confirmed that they will consider late applications. For further information please see (url removed) />
Many Thanks

We are seeking an experienced Infrastructure Engineer with strong expertise in HPE enterprise hardware, backup solutions, and enterprise networking, alongside working knowledge of Microsoft cloud platforms.

Reporting to the Head of IT operations

Key Responsibilities

* Knowledge of enterprise infrastructure using HPE technologies Stack

* Manage and maintain HPE Synergy and HPE BladeSystem platforms

* HPE Rack Servers

* Administer HPE Primera and HPE StoreOnce storage solutions

* Veeam Backup & Replication

* Provide administration and support for Microsoft 365 services

* Support Exchange Online and hybrid Exchange environments

* Good understanding of enterprise networking architecture.

* Perform patching, firmware upgrades, capacity planning, and lifecycle management

* Ensure infrastructure availability, performance

* Produce and maintain technical documentation and operational runbooks

Technical Skills & Experience

Essential

* Strong hands-on experience with:

HPE Synergy

HPE BladeSystem

HPE Primera

HPE StoreOnce

Networking fundamentals.

* Experience with Veeam Backup & Replication

* Solid understanding of enterprise networking architecture

Subnetting

Firewalls

WAN

* Working knowledge of Microsoft 365 administration

* Experience supporting Exchange Online

* Virtualisation experience (VMware, Hyper-V)

Desirable

* Experience with Azure (VMs, networking, storage)

* Knowledge of Azure identity and access (Entra ID / Azure AD)

* Relevant certifications (HPE, Fortinet, Veeam, Microsoft)

* Previously worked in a manufacturing industry

* Citrix

* Hands-on experience with Fortinet technologies (e.g. FortiGate)

* Working with in house applications and development support

Personal Attributes

Strong troubleshooting and analytical skills

Self-motivated

Clear communicator with technical and non-technical stakeholders

Proactive and detail-focused approach to infrastructure management

Remuneration:

Salary: £65,000- £68,000

Car Allowance

Company bonus

Company pension

We’re hiring a Maintenance Engineer at MotionTech in Sherburn-in-Elmet, Leeds. This is your chance to join a business where engineers are genuinely valued, benefit from ongoing training and mentorship, and enjoy a package worth up to £48,500 + potential bonuses. You’ll also be part of a workplace culture built on teamwork, loyalty, and world-class standards of engineering.

Why Join MotionTech?
At MotionTech, we design and deliver automation solutions that keep household-name retailers moving. Our Sherburn facility is home to state-of-the-art equipment including Geek+ robotics, Sparck packaging technology, Sealed Air B+ systems, conveyors, and telescopic booms. We’re proud to achieve 99.8% machine availability - a testament to the skill of our engineers and the strength of our preventative maintenance culture.

But what really sets us apart is our team. We foster a “family feel” environment where camaraderie, investment in people, and professional pride are central. You’ll be joining a close-knit group led by experienced managers who are passionate about mentoring and making engineering an engaging, rewarding career.

The Role
Reporting to the Engineering Manager, you’ll be responsible for:

• Carrying out planned preventative maintenance (PPM) and ensuring all activities are recorded in our Computerised Maintenance Management System.
• Diagnosing, repairing, and servicing a wide range of advanced automated equipment.
• Responding to breakdowns, balancing proactive and reactive work to keep production flowing.
• Supporting continuous improvement initiatives to boost performance and reduce downtime.
• Mentoring less experienced engineers and sharing knowledge across the team.
• Upholding high standards of health, safety, and housekeeping.

A typical day includes PPM inspections, attending morning briefings, analysing data, and tackling robot or packaging equipment repairs. Breakdowns are less frequent thanks to our strong systems, so your expertise really adds value when things get tough.

What We’re Looking For

• Electrically biased Maintenance Engineer (or proven Electrical Engineer with transferable skills).
• ONC/HNC or NVQ Level 3 in Engineering (or equivalent).
• Experience in automation, manufacturing, or installation is highly desirable.
• Strong fault-finding, problem-solving, and communication skills.
• A proactive, can-do attitude and a collaborative, team-first approach.

We value mindset and attitude as much as technical skill – if you’re eager to learn and committed to high standards, you’ll thrive here.

Salary & Benefits

• £48,500 base salary (inclusive of shift allowance).
• Potential for performance-based six-monthly bonus.
• 22 days holiday plus site closure on Christmas Eve night/Christmas Day.
• 3% matched pension and death-in-service benefit worth 6x salary.
• Structured training and development plans, including electrical courses, mentoring, and access to unique “Easy Works” knowledge packs created in-house to fast-track learning.
• Work with cutting-edge automation and robotics in a modern, well-maintained facility.
• Supportive management, team camaraderie, and a culture that values your voice.

Shift Pattern: 4 days on / 4 off, 4 nights on / 4 off (06:00–18:00 and 18:00–06:00).
Location: MotionTech, GXO Facility, Hurricane Way, Sherburn-in-Elmet, Leeds, LS25 6PT.

If you’re looking for a role where your skills are appreciated, your growth is supported, and your work makes a real impact, this is it. Click to Apply.

Service Engineer Hydraulics West Yorkshire - £37-40k plus x 1.5 overtime + company van = £60-65k+ expected earnings

Samuel Frank is recruiting for a Service Engineer with previous experience of working on hydraulics for a successful, well-established Leeds based company.

Key aspects of the Hydraulics Service Engineer role include

• Successful Service Engineer must have recent, demonstrable hydraulics experience
• Company is based in Leeds and when not travelling to site, the Service Engineer will be required on the shopfloor in Leeds
• Hydraulics qualifications would be useful if you havent got them, the company will arrange for you to attend the training courses (Stages 1-3 at the National Fluid Power Centre)
• Previous experience of working for a specialist hydraulics company or on a role heavily focused on hydraulics
• Experience of leading a job from start to finish would be ideal, including a mixture of dealing with the customer and putting together quotes, scheduling works and creation of RAMs from templates.
• 36 hour working week, all hours worked over 36 are paid overtime which starts at x1.5 (on average, 12 hours per week overtime are worked)
• All travelling hours to site (except your commute to the company premises) are paid
• Average schedule could be 2-3 days per week on site and 2-3 days per week on the shopfloor in Leeds
• Regularly weekly stop overs expected
• Ford Transit Van with all required tools supplied
• Hydraulics Service Engineer will receive a float so never has to pay out up front for meals, expenses, hotels etc.
• Service Engineers applying must have a UK driving licence and be able to work in the UK without sponsorship

The company is easily commutable from most of West Yorkshire and is well positioned to be commutable from Leeds, Bradford and the surrounding areas including Harrogate, Guiseley, Halifax, Wakefield, Huddersfield, Dewsbury, Selby, Wetherby, Brighouse and Castleford as well as places further afield such as Sheffield, Hull, Barnsley, Rotherham, Harrogate, York or Wetherby.

Shift Engineer, (Process)

Shape the Future of Dairy

Arla is a global leader in the dairy industry, committed to enabling good food choices that make life better, providing people with natural, sustainable nourishment, while taking care at every step to ensure Arla is a choice they can feel good about. If you are looking to shape the future with an ambitious global cooperative that truly cares about your growth, where everyone feels valued and empowered, and collaboration is the core of culture, Arla is a choice you can feel good about.

Are you ready to keep one of the UKs most advanced dairy sites running smoothly?
Join us at Stourton Dairy, Arlas second-largest and most complex site, producing over 700 million litres of nutritious products every year. This is your chance to play a key role in ensuring our operations never miss a beat.

Youll be part of a highly skilled engineering team, working on cutting-edge equipment and supporting projects that shape the future of dairy,

How you will make an impact

As a Shift Engineer, youll provide essential maintenance and breakdown support across a 24/7 production site. Your work will keep our filling lines, chilling systems, and conveyors running efficiently while driving continuous improvement.

• Maintaining and fault-finding on CIP systems, pasteurisers, separators, homogenisers, and associated process equipment
• Supporting the performance of pumps, valves, flowmeters, heat exchangers, and automated control systems
• Delivering rapid breakdown response to minimise downtime across processing, storage, and filling operations
• Champion health and safety standards and participate in risk assessments
• Support site projects and contribute to performance improvements

This role sits within our Engineering team at Stourton Dairy and follows a4 on 4 off, Day shifts only for the rest of 2026 and then move onto days and nights in 2027.

What will make you successful

Youll bring experience from FMCG, food, or other regulated manufacturing environments, along with a time-served or apprentice-trained engineering background at NVQ Level 3/ONC, HNC or above. Strong problem-solving skills are essential, particularly when it comes to RCA and fault-finding, and youll be confident using systems such as SAP PM or similar CMMS tools, as well as Microsoft Office. Thriving in this role also means being able to work at pace, communicate clearly, and collaborate effectively across teams.

On a personal level, youll stand out through your proactive, solutions-focused approach, your commitment to safety and attention to detail, and your ability to work as a genuinely collaborative team player.

What do we offer?

Were committed to your growth and development, offering internal and external training opportunities. Youll enjoy a competitive salary, 24 days holiday, matched pension contributions up to 6%, life assurance, and flexible benefits. At Stourton, youll join a team proud of its high job satisfaction and steep learning curve, with plenty of challenges and support to help you succeed.

Would you like to join us?

If you want to make an impact and help shape the future of dairy, apply as soon as possible. We process applications on a continuous basis and will close recruitment once the right candidate is found.

Location: Northern PowerGrid Offices (Castleford, Hull, Sheffield, York, Stockton, Penshaw, Shiremoor) 4-6 months initially in office 3-5x per week, then flexible working.
Type: Permanent

Overview:
Protection Applications Design Engineer responsible for designing and integrating protection schemes across power distribution networks from 11kV to 132kV. The role supports network upgrades, asset replacement, reinforcement, smart grid initiatives, and customer connections while ensuring compliance with national protection standards.

Key Responsibilities:

• Design protection schemes for feeders, transformers and busbars across 11kV, 20kV, 33kV, 66kV and 132kV networks.
• Produce protection logic diagrams, tripping schemes and connection drawings using MicroStation V8i or AutoCAD.
• Develop relay logic, relay settings files and communication protocols (IEC61850, DNP3).
• Specify current and voltage transformers, relay panels, multicore schedules and termination equipment.
• Integrate new protection schemes with existing control, protection and SCADA systems.
• Review protection designs from Independent Connection Providers (ICPs).
• Support Factory Acceptance Testing (FAT), witness testing, and commissioning activities.
• Liaise with customers, internal teams and external stakeholders.
• Deliver designs in line with project timelines, cost and quality requirements.
• Maintain project documentation, reports and asset data systems.

Requirements:

• Experience in protection & control design within power distribution networks.
• Knowledge of National Protection Standards (ENATS, TPS, BEBS, Elexon metering standards).
• Strong experience with CAD tools (MicroStation V8i and/or AutoCAD).
• Experience producing relay settings, protection logic and communications files.
• Ability to work on substation protection systems up to 132kV.
• Capability to obtain operational substation access authorisations.
• Strong communication and collaboration skills.

Additional:

• Involvement in asset replacement, network reinforcement, smart grid upgrades, diversions and new connections.
• May provide guidance and support to junior engineers within the protection design team.

Application Design Engineer – MV / HV Power Distribution

Location: Leeds (Hybrid)

Salary: £30,000+ Flexitime + Permanent Benefits + OT + Retention Bonus

An opportunity has opened for an Application Design Engineer to join a global electrical manufacturer specialising in medium & high voltage power distribution equipment. The position sits within the engineering solutions team supporting the technical development of projects across substations, switchgear & protection systems.

This role is well suited to engineers with experience in HV design, protection & control, commissioning or tender engineering who are looking to transition into an environment working on equipment applications rather than purely site-based work.

The Role

Develop technical solutions for MV/HV power distribution systems

Support tendering teams with engineering input during bid stages

Produce technical documentation including single line diagrams, equipment configuration & technical specifications

Provide application engineering support for switchgear, protection relays & substation equipment

Liaise with customers, project teams & internal engineering functions

Ensure solutions comply with industry standards & client specifications

If you are a recent electrical engineering graduate looking to enter the electrical design field, then this role is for you

Join a world-renowned aerospace and defence organisation as a Tooling Engineer in Gloucester on a hybrid basis

Due to a drive for greater success, this advanced manufacturing business is currently searching for Tooling Engineer to add to their talented, hardworking team in Gloucester on an initial 3-6 months contract. Striving for innovation and creativity you can ensure no two days will be the same.

The rate per hour: £35.00 - £40.00 per hour inside IR35 / umbrella

The role:

As the Tooling Engineer, you will be accountable for designing, developing and managing the manufacturing / commissioning of the tooling - to ensure on-time, high-quality products. Your expertise in engineering principles and tooling design will directly contribute to this project.
Key Responsibilities:

* Design and develop advanced tooling solutions to support manufacturing processes, ensuring optimal performance and reliability
* Collaborate with cross-functional teams to identify tooling needs and integrate solutions seamlessly into production workflows
* Conduct tooling feasibility studies, cost analysis, and performance evaluations to drive continuous improvement initiatives
* Utilize CAD software to create detailed designs and specifications for tooling components
* Train and mentor production staff on proper tooling usage and maintenance procedures
* Evaluate and integrate new technologies that can streamline processes and improve overall productivity

Requirements
* Proficiency in CAD software (e.g., Catia) and engineering analysis tools
* Strong understanding of materials and their properties related to tooling applications
* Ability to analyze complex engineering problems and develop effective solutions
* Familiarity with lean manufacturing principles and continuous improvement methodologies
* Deep expertise in tooling design and manufacturing
* Experience with advanced manufacturing technologies, such as additive manufacturing and automation could be an advantage
* Excellent problem-solving skills with a proactive approach to challenges
* Industrial background

Background

This is an exciting opportunity to work for a global business that has developed a strategy of working closely with its contingent workforce. Within the role, you can expect to:

Work on complex, cutting-edge projects
Achieve a work/life balance
Develop your skills

APPLY NOW

If this sounds like the role for you, we’d love to hear from you! Send your CV to Stella today!

Commercial Catering Engineer - West Yorkshire

Basic from £40,000 / Private use of van / Door to door pay / 31 days holiday / Overtime rates

We are currently looking to recruit an experienced Commercial Catering Engineer to work within our specialist commercial catering department. We have been established for over 50 years specialising within the Commercial Catering, Air Conditioning and Refrigeration industry. We work alongside a wide range of clients including: Restaurants, Pubs, Hotels, Schools, Retail, Colleges and Hospitals.

As a Commercial Catering Engineer, your key responsibilities will include service, maintenance, repair and fault finding of gas and electric kitchen equipment. This role is field based and will require you to be customer facing as well as meeting clients.

Previous Experience Required
COMCAT 1,3,5 (Essential)
Full Drivers License (Essential)
Relevant experience working on commercial catering equipment
Electrical experience (not required but an advantage)

Package Overview
Basic from £40,000pa (This is negotiable depending on experience)
40 hour working week
Paid door to door
23 Days holiday + 8 bank holidays
Ford Transit Van and fuel card
Personal use of van
Smart Phone
Uniform and tools
Discounts on sportswear (JD, Tessuti, Go Outdoors)
Company Pension
On Call 1 in 6 with £100 standby payment Time ½ Monday - Saturday
Double time on Sunday’s & Bank Holidays

Top up training provided and funded if required.

If this particular vacancy is of interest to you please call #Fern @ CV Bay on 0121 389 0023

#eng1