We are looking for a Electrical Design Engineer to support our client, a large Power Distribution Network Operator.

About the Company

This Electrical Design Engineer will report to the Design Lead and will work within the Capital Programme directorate based in either our Crawley or Maidstone office. You will be a permanent employee.

About the Role

Working across an Assets and Connections Portfolio, you will produce high quality electrical designs to an agreed scope. Designs to be delivered to cost, time and quality targets. All designs must meet Networks design and CDM standards. These designs could be for both non-contestable and contestable works.

Responsibilities

Produce Electrical Designs that can be constructed in compliance with standards and CDM requirements with little or no management.
Deliver designs, which conform to all relevant Codes of Practice and company and industry standards (for all designs relevant to Sub-stations), together with Electrical Design.
Contribute to the production of technical, commercial and contractual documents for procurement of engineering products.
Ensure compliance with all relevant legislation, regulations and company procedures.
Compliance with design assurance and audit processes.
Preparation of concept and developed design, from specifications and drawings within defined periods.
Provide an excellent service to the customer.
Work as a Team Player within larger diverse teams.
Collaborate with the operational teams to guarantee a smooth process from initial enquiry through to final energisation and project closure.
Comply with the requirements of the designer / principal designer as determined by the 2015 CDM Regulations.
Ensure design eliminates any hazards which may give rise to risks; and reduce risks from any remaining hazards (together with CDM).
Support other members of the team to enhance their technical experience.

Qualifications

Electrical engineering background.
Knowledge of power system and protection design at 132KV, 33KV, 11KV, and intermediate voltages.
Degree level or equivalent in engineering or science.
Work towards achieving Chartership.
Knowledge of design processes and DNO, ENA and International Design Standards including relevant operational aspects to deliver designs.
Work with external engineering organisations and customers/partners representing UKPN to best effect.
Peer review designs within specific area.
A good safety culture and sound understanding of Construction Design and Management (CDM) Regulations and their application in this role.
Work unsupervised, set and comply with own targets, and identify cost-saving solutions.
Good team working skills.
A good level of business, environmental, safety, financial, and regulatory awareness.
A general appreciation of financial reporting systems.
Knowledge of project management.
Proficient in the use of Microsoft desktop applications, in particular: Word, Excel, Project and PowerPoint.
Proficient in the use of AutoCAD or Micro station.
Awareness of current and technological developments in distribution plant and equipment.
Broad knowledge of cables and overhead lines.
Input into construction ideas and techniques, which feed into Networks Green Action Plan.

This is a fantastic opportunity to work with a global leader in its industry

Mobile M&E Engineer - London area

We’re looking for a mobile mechanical and electrical engineer to join a specialist sub contractor in the building services industry. You’ll spend most of your time on technically challenging jobs across commercial buildings and critical sites, dealing with equipment such as:

Pumps and pressurisation units – replacing seals, motors, impellers, and sorting out control issues.
Chillers (air-cooled and water-cooled) – carrying out fault finding, repairs, and performance adjustments.
Air handling units and ventilation systems – fixing motors, dampers, valves, and general breakdowns.
Boilers and heating plant – dealing with problems that go beyond routine servicing.
BMS and controls – identifying issues, resetting systems, and working alongside controls contractors. This is a mobile role, so you’ll cover a range of sites, often at short notice. You’ll need to be comfortable working on your own, making decisions quickly, and explaining clearly to site teams and clients what needs to be done.

Requirements:

A solid background across mechanical and electrical building services.
Confidence working with pumps, chillers, AHUs, and plantroom equipment.
Strong fault-finding ability – someone who enjoys problem solving.
A full UK driving licence

Job Title: Maintenance Engineer

£50,000 Per Annum

Monday - Friday - Day Shift

We are seeking an experienced Maintenance Engineer to support our clients engineering team, Reporting to the Engineering Manager, you will be responsible for ensuring all mechanical and electrical systems are safe, efficient, and compliant production, while maximising plant availability and performance.

Key Responsibilities

* Day-to-day maintenance operations to ensure safe, reliable, and efficient production

* Ensure full compliance with UK health, safety, and environmental regulations

* Optimise production performance, efficiency, and availability in line with output targets

* Coordinate with maintenance, engineering, and planning teams to minimise downtime

* Contribute to outage maintenance planning, commissioning activities, and performance testing

Essential Requirements:

* Qualified Electrical or Mechanical Engineer

* Proven experience in a electrical engineering position within a manufacturing or industrial processing facility

* Ideally NEBOSH / IOSH / Authorised Person qualifications

How to Apply:
To apply for the Maintenance Engineer, please submit your CV via this advert. Alternatively, for more information, feel free to contact the team at Eko Talent

£60,000 + (OTE: £70,000) + Overtime + Signing bonus (£1,500) + Excellent Company Benefits + Company Pension + Training + Progression

Croydon

Are you a Electrical Maintenance Engineer looking to join a blue chip company offering specialist training, progression and overtime paid at a premium rate?

This is a excellent opportunity to develop as an engineer for a nationally renowned business, where you will be upskilled through training on state of the art machinery in a varied maintenance role.

This national organisation are now looking to expand their engineering team due to high levels of success. They have a great reputation for staff retention and progression, as well as offering great employee benefits.

In this role you will provide preventative and reactive maintenance across all aspects of production with a primary focus on PLC systems.

This role would suit a electrical bias maintenance engineer looking to join an expanding team within a market leading company with ambitious goals for the future.

The Role:
Reactive & Planned Maintenance
Excellent training and progression
Shift Pattern - Days/Nights

The Person:
Maintenance Engineer
Electrical qualifications
Looking to develop through a wide range of training

BBBH(phone number removed)
To apply for this role or to be considered for further roles, please click “Apply Now” or contact Tom at Rise Technical Recruitment.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.

We are an equal opportunities company and welcome applications from all suitable candidates

Job role: Recycling Maintenance Engineer

£65,000 Basic + Benefits + Overtime

Monday - Friday - Day Shift - 7AM - 4PM

We have partnered with a leading recycling manufacturing company, specialising in recycling, quarry, aggregate machinery, who due to continued success are looking to recruit a Recycling Maintenance Engineer.

The main responsibilities of the Recycling Maintenance Engineer will include.

* Ensuring recycling, quarry and aggregate plant equipment is functioning in the correct manner.

* Maintaining balers, compactors, shredding machinery.

* Maintaining all equipment on site, such as, conveyors, pumps, motors, gearboxes, valves, PLC controlled equipment, sortation equipment, and balers.

* Maintaining all mechanical and electrical process equipment.

* Fault finding and diagnostics.

* Following a PPM schedule and recording follow up work.

* Ensuring appropriate housekeeping standards are maintained on a daily basis.

* Continually developing to improve operations to drive improvements in quality, cost and safety.

* Assisting production with machinery problems and setups, providing relevant training when appropriate.

If you are interested in this Recycling Maintenance Engineer vacancy, please submit an up-to-date CV through this advert or call the Eko team on (phone number removed)

A Central London based consultancy has an immediate requirement for an intermediate engineer to join their design team.

Your responsibilities would include:

Supporting the Senior Engineers, Associates, and Directors in undertaking electrical design and consultancy work, producing electrical design drawings, calculations (using Amtech, Hevacomp, IES, Relux, and Dialux software, etc), reports, specifications and schedules, systems design

Liaising with other design team members internal and external, represent the business at meetings where appropriate.

Fulfilling the technical responsibilities of an Electrical Engineer including but not limited to:

Carrying out surveys of existing facilities and preparation of survey reports

Assisting with early-stage design works, load estimates and assessment of plant area spatial allowances

Provision of design calculations

Assisting in the development of design solutions to comply with all recognised standards and Building Regulations, including Part F/ Part L / Section 6 requirements, etc,

Assisting in the production of reports as required, including relevant supporting documentation required for BREEAM accreditation

Supporting project risk assessments to ensure safe installation and operation and in compliance with CDM legislation.

Production of CAD drawings and provision of all support to produce satisfactory detail drawings as required for tender, construction, or other purposes

Assisting in the production of project specifications and schedules, adapting standard specification information where possible

Attending and contributing to design team and project meetings

Assisting in undertaking site supervision duties as necessary to ensure works are installed in accordance with contract documentation and good engineering practice

Assisting in witnessing the testing, proving, and commissioning procedures of final installations as required, etc.

Contributing to ensure the application and maintenance of all Integrated Management System procedures

Carrying out all personal management duties including weekly recording of man-hour commitments to individual projects

Herts WD3
£35k-£55k

Family run long established small structural design practice require an additional structural engineer to join their happy team. This expansion is due to increasing workload.

The role would suit an engineer with a minimum of 3 years of buildings design experience, ideally with experience in the residential sector. Ability to use Autocad would be helpful.

The practice is small and very friendly, currently consisting of 6 Engineers and 1 Technician. You should be able to design in all the main materials. Excellent communication skills are essential, as the role will include running your own projects, dealing with clients and architects.

The work is very varied, mainly in the residential sector, with projects typically ranging from small up to £4-5m in build value.

The station is within easy walking distance from the office. No current or future visa sponsorship can be offered, so you must have the full right to work in the UK long term and live within reasonable commuting distance.

Sam Robson
(phone number removed)

Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

Mission Critical (Data Centres) | London | Hybrid Working

What if you could take the lead on high-profile data centre projects that power the digital world?

We’re looking for a Senior Electrical Design Engineer – Building Services to join a specialist Mission Critical team delivering complex data centre and critical infrastructure projects.

You’ll play a key role in designing resilient electrical systems that keep essential facilities operating 24/7.

This is an opportunity to step into a leadership-focused role where you’ll shape technical outcomes, mentor engineers, and take ownership of projects from concept through to completion.
What you’ll accomplish

Lead the electrical design of major mission-critical / data centre projects
Deliver fully coordinated electrical building services designs across all stages
Ensure projects are delivered on time, on budget, and to the highest technical standards
Guide and mentor junior engineers, helping grow team capability
Act as a key technical contact for clients, contractors and stakeholders
Oversee construction phase support and review technical submissionsWhat we’re looking for

4–7+ years’ experience in electrical engineering (building services)
Strong experience delivering data centre or mission critical projects
Expertise in HV/LV systems, UPS, generators, transformers, distribution, earthing and protection systems
Proven ability to manage multiple projects and tight deadlines
Confident communicator with strong stakeholder management skills
Recognised qualification in Electrical EngineeringWhy join?

Work on complex, high-value projects shaping critical digital infrastructure
Hybrid working and flexible environment
Clear progression opportunities into Lead and Associate-level roles
Collaborative, technically driven culture focused on engineering excellence
If you’re ready to take ownership of technically challenging electrical design projects and advance your career in mission critical engineering, we’d love to hear from you.

Eligo Recruitment is acting as an Employment Business in relation to this vacancy. Eligo is proud to be an equal opportunity employer dedicated to fostering diversity and creating an inclusive and equitable environment for employees and applicants. We actively celebrate and embrace differences, including but not limited to race, colour, religion, sex, sexual orientation, gender identity, national origin, veteran status, and disability. We encourage applications from individuals of all backgrounds and experiences and all will be considered for employment without discrimination. At Eligo Recruitment diversity, equity and inclusion is integral to achieving our mission to ensure every workplace reflects the richness of human diversity

Join a well-established company in the energy & natural resources industry as a Maintenance Engineer. This role involves ensuring the smooth operation and maintenance of equipment and systems in their Stratford (East London) facility.

Client Details

The company is a recognised name in the energy & natural resources sector, known for its robust infrastructure and commitment to excellence. They provide a professional environment with opportunities to contribute to impactful projects.

Description

Perform routine maintenance and repairs on equipment and machinery to ensure optimal performance.
Identify and troubleshoot mechanical and electrical issues promptly.
Implement preventative maintenance schedules to reduce downtime.
Collaborate with the engineering team to improve systems and processes.
Ensure compliance with health and safety regulations at all times.
Maintain accurate records of maintenance activities and report findings.
Assist in the installation and commissioning of new equipment.
Provide technical support and guidance to other team members as needed.Profile

A successful Maintenance Engineer should have:

Relevant qualifications in engineering or a related field - including an electrical qualification
Strong knowledge of mechanical and electrical systems.
Problem-solving skills with a focus on providing effective solutions.
Commitment to maintaining high safety and quality standards.
Ability to work both independently and collaboratively in a team environment.Job Offer

£42,230 to £43,555 DOE
Comprehensive pension scheme.
Permanent position within a reputable company in London.
Opportunities to work on impactful projects in the energy & natural resources sector.
Supportive and professional working environment.If you’re ready to take the next step in your career as a Maintenance Engineer, apply today to join this exciting opportunity in London

Electrical Field Service Engineer
Location: South London
Sector: EV Infrastructure
Salary: £39-50,000 Plus Company Vehicle and Fuel Card

Job description

An organisation is seeking an Electrical Field Service Engineer to commission, maintain, fault-find and repair EV charging equipment across the UK, including AC chargers, Rapid DC, Ultra, and High-Power Charging (HPC) units.

This role suits a hands-on engineer with a strong electrical background who can work autonomously on customer sites, delivering reliable, high-quality technical support. The Field Service Engineer will help ensure charging assets remain safe, compliant, and performing at their best, meeting both company and client expectations.

The work will take place in a range of environments, including outdoor locations and occasional confined spaces. Travel is required, with some overnight stays.

Essential

NVQ Level 3 Electrical qualification
Minimum 2 years’ experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment)
Proven ability to work independently on client sites, diagnosing and resolving issues without direct supervision
Experience working in SLA-driven environments
Competent with basic test and measurement tools (e.g., multimeters, voltage testers)
Strong fault-finding and problem-solving skills, including complex technical diagnostics
Confident communicator with good customer-facing skills
Effective time management, particularly when travelling between sites
Full UK driving licence with 6 penalty points or fewerDesirable

BS7671:2018 (18th Edition Wiring Regulations)
City & Guilds 2391/2394 Testing and Inspection
Experience within EV charging, renewables, or power electronics
EV charger certification or manufacturer training
Practical experience commissioning/maintaining Rapid DC, Ultra and HPC chargers
Ability to read and interpret schematics and technical manuals
Understanding of analogue and digital electronics/components
Strong awareness of electrical hazards and on-site H&S requirementsKey responsibilities

Coordinate with Service Coordination and Operations teams to ensure accurate job data capture and timely service reporting
Commission, configure and hand over AC and Rapid DC chargers on customer sites
Complete set-up, testing and verification to confirm safe operation and standards compliance
Work alongside project management and installation teams to integrate charging systems with customer infrastructure
Keep company tools, assets and test equipment in good condition, reporting defects immediately
Carry out routine and preventative maintenance to maximise uptime and performance
Diagnose and resolve faults across electrical, mechanical and software-related issues
Perform diagnostics, firmware updates and calibration as required
Replace defective parts (and occasionally complete charger units), ensuring repairs follow manufacturer guidance
Provide on-site technical support and user guidance/training to customers
Respond promptly to service requests and maintain clear, professional client communication
Log all service activity, repairs, maintenance actions and customer interactions within the service management system
Follow all safety procedures, company policies and site rules while working in the field
Ensure compliance with applicable electrical codes and standards during commissioning and maintenance
Participate in required safety training and certificationsBenefits

Structured career progression framework
Company van and fuel card
Overtime opportunities
30 days annual leave (inclusive of company shutdown days)
Travel subsistence provided
Discretionary company performance bonus
BUPA healthcare (after 6 months)
Salary sacrifice pension scheme (8% total)
Salary sacrifice EV car scheme and charger installation
Salary sacrifice holiday purchase scheme (up to 5 days)
Enhanced family-friendly policies
Benefits platform with a wide range of discounts and services
Long service awards

London & South East

Purpose of Job
We are looking for an experienced Mobile Electrical Maintenance Engineer to join our team, working across commercial sites in designated region. This is a mobile role covering multiple buildings, carrying out PPM, reactive maintenance, fault finding and electrical repairs in a professional, customer‑focused environment.
This role suits an engineer with strong electrical knowledge, excellent fault‑finding ability, and experience working in Facilities Management (FM), Building Services, commercial properties or multi‑site environments.

Key Responsibilities

Carry out PPM (Planned Preventative Maintenance) on electrical systems including lighting, power, emergency lighting and distribution boards.
Complete reactive maintenance, electrical repairs and breakdown support across multiple client sites.
Diagnose electrical faults quickly and return systems to service.
Undertake minor electrical installation works and remedial tasks.
Complete electrical testing and inspection duties (EICR tasks where qualified).
Update logbooks, service sheets and compliance documentation.
Ensure safe working practices through risk assessments and method statements.
Maintain full compliance with Health & Safety, regulations and company procedures.
Manage spare parts and materials needed for repairs and maintenance.
Update CAFM systems (e.g. Maximo) ensuring accurate job closure.
Provide excellent customer service and represent the business professionally.
Support subcontractors on site and supervise works when required.
Take part in an out‑of‑hours call‑out rota.
Perform additional duties required by the engineering and management team.Knowledge & Skills

NVQ Level 3 / City & Guilds Level 3 in Electrical Installation or Electrical Maintenance (essential).
18th Edition Wiring Regulations (essential).
C&G 2391 Test & Inspection (preferred but not essential).
Full UK driving licence.
Experience
Essential:

• Previous experience as an Electrical Maintenance Engineer in commercial buildings.
• Strong fault-finding and diagnostic skills.
• PPM, reactive maintenance and minor electrical works.
• Experience working in FM, Building Services or multi‑site mobile roles.

Desirable:

• Basic mechanical awareness (e.g. pumps, fans, motors).
• Familiarity with BMS systems.
• Experience working in corporate, high-security or critical environments (data centres, financial buildings).

At BGIS we believe that diversity and inclusion is a key business driver, such that we never lose sight of its importance as it is woven into the fabric of our organisation. We are committed to maintaining a barrier-free recruitment process by providing equal employment opportunities through recruiting and retention of individuals of all backgrounds. We recognise that promoting diversity is an essential component of our continuing pursuit for organisational success! #BGISUK

Fire Small Works Engineer

£35000 - £40000/annum Vehicle, call out and over time

Location

Borehamwood

Posted

Company van, overtime, holidays, Call out

To apply for this opportunity you must have or hold the following:

• Fire and Security Knowledge essential

• Fault Finding experience

• Installation experience

• Ability to work by yourself and within a team

• Full UK Driving license

Please see some question engineers ask

This company is a well-established organisation in the Fire and Security industry. They offer a wide range of services including design, maintenance and installation of fire and fire related products. Due to planned growth within the installation and service department, they are now actively looking to recruit an experienced Fire small eorks engineer.

• Company Vehicle

• Mobile Phone

• Generous Annual Leave

If you are looking for a new challenge and want to work for a forward thinking leading company Who will continue to expand and develop. Please contact George on the listed number (phone number removed) or ideally e-mail with a copy of your current CV

Air Conditioning Engineer

Within M25

£52k, 33 days holiday, OT, travel, fuel card and van

Are you an experienced Air Conditioning Engineer looking for a new challenge with a well-established company?

My client, a leading Building Services specialist based in West London, is seeking a skilled Air Conditioning Engineer to join their team and deliver top-quality service across commercial and industrial sectors.

Key Responsibilities:

Perform routine maintenance, fault diagnosis, and repairs.
Provide clients with expert technical support and troubleshooting.
Ensure all work complies with health, safety, and refrigerant regulations.
Maintain accurate service records and report on system performance.

The Ideal Candidate:

Proven experience as an air conditioning engineer with a strong understanding of HVAC systems, refrigeration principles, and electrical components.
Ability to diagnose and resolve faults efficiently.
Excellent communication and customer service skills.
Knowledge of F-Gas regulations, health and safety standards, and compliance requirements.
Self-motivated with the ability to work independently and manage workload effectively.If you’re a dedicated air conditioning engineer looking to take the next step in your career and you meet the criteria then please contact Russel Cleverley in CONFIDENCE.

Apply today with an up-to-date CV

Maintenance Engineer
Location
Commutable from: Woolwich, Bexley, Dartford, Bromley, Greenwich, Sidcup, Lewisham, Swanley, and Erith

£52,000 - £54,000
Days & Nights Shift Pattern
Are you a skilled Electrically Biased Maintenance Engineer looking for your next challenge in a fast-paced FMCG environment? This is your opportunity to work with cutting-edge machinery, solve diverse engineering challenges, and develop your career within a collaborative and forward-thinking team.
The Role
As a Maintenance Engineer, you will play a key role in ensuring the reliability and efficiency of production equipment across the site.
Key Responsibilities
Planned Preventative Maintenance (PPM) - Maintain equipment to minimise downtime and maximise efficiency.
Breakdown Response - React quickly to faults to reduce production disruption.
Fault Diagnosis & Repair - Troubleshoot and resolve electrical and mechanical issues.
Continuous Improvement - Identify and implement improvements to enhance performance, safety, and reliability.
Team Collaboration - Work closely with production teams to ensure smooth operations.
What We’re Looking For
Technical Expertise - Strong electrical skills with solid mechanical knowledge.
Experience within a manufacturing environment (ideally FMCG).
Ability to deliver both proactive and reactive maintenance while contributing to continuous improvement initiatives across plant and site services.
Qualifications (one or more of the following preferred):
·BTEC / ONC minimum in Electrical discipline
·Multi-skilled Engineering qualification
·C&G 2330 Level 3 Electro-technical Certificate combined with NVQ Level 3 Electrical Maintenance
·Time-served apprenticeship
·HNC in Electrical or Production Maintenance Engineering
Suitable Backgrounds
This role would suit candidates with experience as:
Maintenance Engineer, Maintenance Technician, Electrical Maintenance Engineer, Shift Engineer, Day Engineer, Multi-Skilled Engineer, Mechanical Engineer, Service Engineer, or Packaging Engineer.

Position: Electrical Shift Engineer
Location: City of London
Salary: £60,000 per annum + Overtime
Hours: Continental Shift Pattern (Days & Nights)
Contract: Permanent, Full-Time

An exciting opportunity has arisen for an experienced Electrical Shift Engineer to join the on-site engineering team at a high-profile commercial facility in the City of London. This role offers the chance to work in a technically challenging environment with a prestigious organisation known for its excellent training programmes and clear progression opportunities.

What youll do:

• Carry out planned preventative maintenance (PPMs) and reactive electrical maintenance across a wide range of building services plant.
• Perform fault finding and repairs on electrical systems including power distribution, lighting, emergency lighting, control panels, and associated plant.
• Assist with the safe operation and maintenance of critical electrical infrastructure across the site.
• Ensure all systems operate safely, efficiently, and in line with compliance and statutory regulations.
• Respond promptly to breakdowns and support the wider engineering team to minimise downtime.
• Maintain accurate maintenance records and ensure all work is completed to a high professional standard.
• Support small project works, system upgrades, and continuous improvement tasks when required.

What youll bring:

• City & Guilds / NVQ Level 3 or equivalent electrical qualification.
• Experience working within commercial building services or facilities maintenance.
• Strong electrical fault-finding and diagnostic skills.
• HV Authorised Person status or experience working around HV systems (desirable).
• A proactive and professional approach with strong communication skills.

Why Apply?

• £60,000 per annum salary
• Continental shift pattern (days & nights)
• Prestigious commercial site in the City of London
• Excellent training and progression on site-specific systems
• Plenty of overtime opportunities available
• Long-term, stable role within a professional engineering env

Premier Recruitment Group is working in partnership with a well established and international organisation in Dartford to recruit an Multiskilled Engineer to join their team. This is an exciting, full-time and permanent role.

The working hours are Monday to Friday 1.50pm to 10pm (finishing at 8.30pm on Friday).

The salary is up to £52,000 with an additional 20% shift premium = £62,400

Additional yearly 6% company target bonus based on overall company performance.

Job scope:

To assist with planning, and then carry out general repairs / fault finding, maintenance, routine and major of machinery and service equipment, in order that downtime is minimised and that adequate records and files for all works are maintained.
To provide maintenance support inside and outside the manufacturing plant.
Where required, produce and modify records, drawings and diagrams relative to Plant and associated areas, and all other areas that have been worked on.
To ensure all daily checks and calibration tasks that are the responsibility of the Engineering Department are carried out on time, correctly and in line with SOPs.
To ensure equipment changes are carried out in accordance with Quality Assurance programme and Change Control procedures.
To ensure the Engineering workshop, and on / off plant storage areas, mixer bays, and any other areas worked in are left clean, safe and tidy after maintenance works have been carried out.
To assist the Engineering Supervisor and where tasks delegated, the Plant Support Engineer(s) in the day to day control and management of contractors / sub-contractors.
To carry out duties in line with the Company’s Quality Assurance Policy, SOPs and within strict cGMP guidelines, ensuring current engineering practices are reflected in the relevant SOP.
To ensure your own safety and that of others at all times during all Maintenance and Engineering operations.
To ensure that all work carried out is to best practice guidelines
To ensure that all equipment prior to maintenance is isolated safely / securely, and following maintenance / other work is handed back in a state of safe working order.Skills:

Associated City & Guilds / ONC / HNC / NVQ Level 3 or equivalent in Electrical or Mechanical Engineering
Time served Apprentice
Several years’ experience within a Pharmaceutical/FMCG environment or at a minimum, a closely related industry
Highly organised with good time management skills
Ability to influence without direct management responsibility
Able to build business relationships internally and externally
Excel/Word/Outlook/Teams
Use of CMMS (Computerised Maintenance Management System)
Fault Finding on machinery
Lean/Quick Kaizens
Completion of Planned Maintenance electronically and via paperworkIf you think you have the right skills, knowledge and abilities for this position and would like to be considered, please apply or contact directly Tom Kurczab at Premier Recruitment Group

£35,000 - £45,000 + Training + Progression + Company Benefits

Hart, Hampshire

Are you a Manufacturing Engineer, Production Engineer or similar with a background using SMT machines, looking to broaden your technical expertise in production and programming?

Do you want to work with advanced technology and join well-established business that works on varied projects for clients within industries such as Defence, Aerospace, Rail, Broadcasting and Infrastructure?

This is a great opportunity to become part of a well-established Electronics Manufacturing Services provider recognised for its technical expertise and full turnkey manufacturing capabilities. The company has built a strong reputation for delivering efficient, high-quality production solutions and are expanding their team due to consistent long-term growth.

In this hands-on role, you’ll work closely with an experienced production team supporting PCB assembly processes, programming SMT Machines, testing, fault finding and general supervision of production manufacturing. You’ll play a key role in maintaining quality standards, improving production workflows and ensuring smooth day-to-day manufacturing operations.

This role would suit a Manufacturing Engineer, Production Engineer or similar with a background working with SMT machines looking to develop within a respected and growing EMS environment.

The Role:

• Electronics Manufacturing Production Engineer
• Supporting PCB assembly processes, programming SMT Machines, testing, fault finding and general supervision of production manufacturing
• Monday to Friday 8am-4pm

The Person:

• Electronics Technician, Manufacturing, Production Engineer or similar
• Background working with SMT Machines
• Commutable to Hart, Hampshire

Reference: BBBH24271

Keywords: Engineer, Engineering, PCB, Wiring, Production, Manufacturing, Electrical, Electronic, Assembly, Build, Assembler, Technician, Basingstoke, Reading, Farnham, Fleet, Hampshire, Hook, Farnborough, Camberley, Woking.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

Electrical Shift Engineer
City of London
£50,000 – £55,000 + HV Training Provided
An excellent opportunity has arisen for an Electrical Shift Engineer to join a leading building services provider on a high-profile critical site in the City of London. Working with a well-established and highly reputable company, this position offers the chance to be part of a professional and experienced maintenance team while benefiting from specialist HV training, ongoing development, and genuine career progression opportunities.

This role will involve both planned preventative maintenance (PPM) and reactive maintenance, as well as remedial works and emergency response across the site. The successful engineer will work on a continental shift pattern (days and nights) and should be electrically biased, hold City & Guilds or NVQ electrical qualifications, and have at least three years’ experience within the building services maintenance sector.

If you’re looking to develop your technical skills, gain high-voltage experience, and build a long-term career with a market-leading organisation, this role provides the ideal platform.

Key Responsibilities

• Planned preventative maintenance (PPMs) and reactive maintenance
• Single and three-phase power systems
• Motors and generators (on/off load testing)
• UPS systems
• LV/HV switching
• Planned shutdowns
• Emergency lighting maintenance
• Fire alarm testing
• AHUs, FCUs, VAVs, and CRAC units
• Sprinkler systems and pumps
• BMS operation and monitoring
• Organising and supervising subcontractors
• Raising quotations for remedial works
• Ensuring health & safety compliance
• Maintaining logbooks and documentation
• Completing risk assessments
• Issuing and managing permits to work

Requirements

• City & Guilds / NVQ (or equivalent) in Electrical Installations
• Electrically biased maintenance background
• Minimum 3 years’ experience in building services maintenance
• Career-driven and motivated
• Professional, reliable, and personable

Salary & Benefits

• £50,000 – £55,000 per annum
• HV training provided
• Continental shift pattern (days & nights)
• 20 days holiday
• Pension package
• Significant overtime opportunities available
• Ongoing training and development
• Excellent internal progression opportunities

To join a highly reputable building services provider on one of their flagship City of London contracts, apply now with your updated CV and contact details.

Multi Skilled Maintenance Engineer (Mechanical Bias) Injection Moulding

Department: Maintenance / Engineering
Location: Hampton
Reports To: Maintenance Manager
Employment Type: Full-time / Permanent

Salary: £48,000 or £52,000 (plus a 12.5% shift allowance)

Role Purpose

The Mechanical Engineer will provide specialist engineering support for injection moulding operations at Hallite Seals International. The role ensures that moulding machinery, tooling, and associated mechanical systems operate safely, efficiently, and reliably to meet production, quality, and business performance targets.

Key Responsibilities

1. Mechanical Maintenance & Reliability

• Diagnose, repair, and maintain injection moulding machines and related equipment.
• Work with hydraulic, pneumatic, and mechanical drive systems to maximise machine uptime.
• Conduct root cause analysis (RCA) on failures and implement corrective actions.
• Develop and execute preventive and predictive maintenance schedules.
• Maintain accurate maintenance records, logs, and machine history information.

2. Process and Production Support

• Work closely with Process Technicians to identify and resolve mechanical issues affecting cycle time, scrap, and part quality.
• Support setup, trials, and validation of mould tools and new materials.
• Monitor machine performance and recommend improvements to enhance OEE.
• Provide rapid-response support to minimise production disruptions.

3. Equipment Projects & Installation

• Assist with the specification, installation, and commissioning of new moulding machines and peripheral equipment (dryers, chillers, robots, hot runner systems).
• Support machine upgrades, rebuilds, and retrofits to improve performance and reliability.
• Liaise with external suppliers and contractors during major maintenance activities.

4. Safety, Compliance & Documentation

• Ensure all machinery complies with PUWER, LOLER, HSE, and internal safety standards.
• Conduct engineering risk assessments and support safe systems of work.
• Maintain technical documentation including drawings, schematics, and maintenance procedures.
• Promote a strong safety culture across maintenance and production teams.

5. Cross-Functional Support & Continuous Improvement

• Work collaboratively with Production, Quality, Toolroom, and Engineering teams.
• Support CI initiatives including Kaizen, Lean, 5S, and waste reduction activities.
• Contribute technical input to NPI (New Product Introduction) and development projects.

Skills, Experience & Qualifications

Essential

• Strong mechanical engineering background, ideally in injection moulding or heavy industrial machinery.
• Hands-on experience with hydraulics, pneumatics, mechanical drives, and machine structures.
• Strong problem-solving skills (RCA, 5 Why, Ishikawa).
• Ability to read mechanical drawings, hydraulic/pneumatic schematics, and technical documentation.
• Understanding of industrial machine safety standards.
• Ability to work under pressure and prioritise effectively in a fast-paced production environment.

Desirable

• Experience in plastics, moulding, or sealing product manufacturing.
• Knowledge of automation, robotics, or hot runner systems.
• Familiarity with CMMS systems.
• Lean or CI certification (e.g., Yellow Belt).

Job Title: Air Conditioning Engineer
Location: Swanscombe, Kent
Salary: £40,000 £50,000 per annum DOE
Job Type: Full-Time | Permanent
Hours: Monday to Friday, 8:00am 4:00pm (overtime available)

Job Description:
We are currently recruiting for an experienced Air Conditioning Engineer to join a growing team based in Swanscombe. The role will primarily involve domestic installation work, although experience working on commercial systems would be beneficial.

The successful candidate will be responsible for carrying out installations, commissioning, servicing, and repair work on a range of air conditioning systems. This is a great opportunity for someone looking to join a supportive team with long-term career progression.

Key Responsibilities:

• Carry out air conditioning installations (primarily domestic)
• Commission newly installed systems
• Service and repair existing AC units
• Diagnose faults and provide effective solutions
• Ensure all work is completed to a high standard and in line with health & safety regulations

Requirements:

• Strong technical knowledge in installation, commissioning, and servicing of air conditioning systems
• F-Gas certification required
• Relevant NVQ or equivalent qualification in Air Conditioning / Refrigeration (preferred)
• Full UK driving licence
• Good problem-solving skills and attention to detail

Benefits:

• Salary up to £50,000 DOE
• Overtime available
• Career progression opportunities
• Supportive working environment

Building Services Engineer - Client Direct - Banking Environment - London - £45,000 + bonus + AP Training

About the Role:

Exciting opportunity to work In House / Client Direct for a very well known financial institution in London. My client is looking for an Electrical or Mechanically biassed Maintenance Engineer to be based across 2 critical / commercial buildings next to each other in London. The successful candidates will be electrically or mechanically biased (C&G / NVQ) with a proven track record in commercial building maintenance, ideally within a critical site (i.e. Bank, Data centre, Blue chip office etc). Working with the maintenance team on site, he or she will be required to carry out mechanical, electrical and fabric maintenance to the following. In return the company is offering a competitive package of £45,000 + 10% bonus + AP Training and AP allowance once training complete.

?? Whats in it for you?

• Up to £45,000 + 10% bonus
• £750 HV / £750 LV or £750 Mechanical AP payment
• ~£3,000 call out allowance after site familiarisation (1 in 7 call out + 2x hourly rate if called out)
• Overtime available at 2x rate on weekdays and weekends
• HV/LV or Mechanical AP Training
• 10% Pension contribution from employer
• 26 shifts holiday
• Private Health Insurance
• Dental Plan
• Interest Free Season Ticket Loan
• Life insurance 4x salary
• A lot of progression available

Working Hours:

• Day Shift (10 hour shifts)
• 3 on, 1 off, 3 on, 3 off, 4 on, 7 off, 4 on, 3 off
• Later start on Saturdays & Sundays

Key Responsibilities:

• Ensure that Planned Preventative Maintenance & Reactive maintenance is carried out to all client assets through operation of Planned Preventative Maintenance System.
• Ensure that plant faults and defects are swiftly remedied to maintain the plant in serviceable order at all times.
• Ensure that suitable spares are available to carry out maintenance of the above plant.
• Ensure that comprehensive maintenance records are completed in the form of job sheets.
• Ensure that Method Statements and Risk Assessments are prepared, reviewed and
• utilized for all tasks (PPM and reactive) carried out to ensure safe working practices.
• Lighting (Small installation, Fault-finding, Lamping, Changing ballast’s, Control panel, Power distribution)
• Emergency lighting
• Air Conditioning - Air Handling Units / Fan Coil Unit (Filter changes, cleaning)
• Chillers - Re-set
• Water Treatment (Temperature checks / Not dosing)
• Monitor mechanical plant
• Pumps, motors
• BMS System - Monitor (i.e. Hot & Colds)
• Undertake all allocated tasks and perform them in a timely and professional manner.
• Be proactive in identifying and reporting faults with building services equipment and take steps to resolve them.
• Be proactive to ensure all H&S issues are reported/escalated as required.
• Maintain informal communications with Client staff members related to service levels and issues.
• Report service affecting issued to the site management team for formal communication with the client.
• Remain flexible with regard to site attendance and tasks undertaken within personal competency.
• Be fully aware of relevant Health and Safety and general legislative matters.
• Escort specialist subcontractors

? Requirements:

• Electrically or Mechanically qualified Level 3 / HNC / HND
• You must be able to provide copies of your trade certificates (Essential)
• Will need to pass security clearance
• A proven track record in commercial building maintenance
• An understanding of critical plant: Chillers, HVAC, UPS systems, Cooling Towers etc
• Excellent customer skills
• Ideally multi skilled

Highly desirable (Not essential)

• High Voltage - Experience / Qualification - Current

?? Ready to Apply?

Send your CV to
Or call 0203 583 3099 and ask for Fin to learn more!