Multi Skilled Maintenance Engineers
Kings Cross, London
£55,000

A standout opportunity for a Multi Skilled Maintenance Engineer to work for an in house maintenance team for a commercial property by Kings Cross, London. Away from your generic every day building services maintenance roles, this exciting opening will offer a great salary along with many benefits that can’t be matched from a maintenance provider.

Working on a 36 hour week, Monday to Friday, you will be responsible for planned and reactive maintenance across electrical, mechanical and HVAC associated systems along with remedial works and emergency response on site. This role is not your mundane PPM position, requiring engineers to be highly technical with the ability to fault find, diagnose and repair electrical, mechanical and HVAC associated systems in house.

The Multi Skilled Engineer should hold either Electrical or Mechanical qualifications City and Guilds / NVQ qualifications holding a good all round building services maintenance knowledge.

Duties

• PPMs & Reactive maintenance
• Single and Three Phase Power, Motors, Generators (on/off load tests), LV/HV switching, Shutdowns, Switchgear, Motors, Emergency Lighting, Fire Alarm Test, AHUs, FCUs, VAVs, Sprinkler Systems, Pumps, Belts, Bearings, Seals, BMS Operation
• Carry out isolation of plant and systems in accordance with safety requirements.
• Ensure corrective/repair works are carried out in accordance with regulations.
• Endorse safe working practices, quality standards conformity and best practice methods.
• Organising subcontractors
• Completing logbooks and RAMS
• Reports
• Permits to work
• Raise and close jobs on PDA’s as necessary.

Requirements

• City & Guilds / NVQ (or equivalent) qualification in Electrical Installations or Mechanical Engineering
• Ability to fault find, diagnose and repair electrical, mechanical and HVAC associated systems
• Building Services Maintenance experience
• Career driven and motivated
• Polite and personable

Salary and Benefits

• £55,000 per annum
• Monday to Friday
• 36 hour working week
• 27 days holiday + bank holidays
• 20.5% Contributory Pension package
• Annual Bonus
• Annual Salary uplift
• Training

What you will do

Join our Building Efficiency Division, delivering energy-efficient solutions to over a million customers globally. As a BMS Engineer, youll perform routine service and maintenance on Building Management Systems across key sites in London and the South. Youll support stakeholders with BMS-related queries, identify small works opportunities, and may join the on-call rota for emergency callouts.

Who were looking for

Were ideally looking for candidates with experience working on JCI’s Metasys systems. However, if youre a technically minded individual with hands-on experience in HVAC systemssuch as AHUs, FCUs, Chillersand have worked with Trend, Tridium or any other BMS products, we encourage you to apply. We value a willingness to learn and are willing to offer an accelerated training program to the right individual, to help you to quickly become proficient across Johnson’s controls products.

Key Responsibilities

• Perform routine BMS PPM service visits and corrective small works
• Respond to BMS-related callouts and support customer needs
• Review site logbooks and address minor issues during visits
• Produce clear and accurate service reports with upgrade or repair recommendations
• Supervise subcontractors (e.g., electricians, panel manufacturers) on-site
• Modify and configure BMS software to meet client objectives
• Maintain up-to-date documentation reflecting system changes

What we offer

• Competitive salary with overtime and standby allowance
• 25 days annual leave + bank holidays (holiday purchase scheme also available)
• Functional company vehicle
• Comprehensive benefits: pension, life assurance, EAP, referral scheme, retail discounts, Cycle2Work, and more
• Work on prestigious buildings across London
• Career development opportunities and training pathways
• A strong safety culture through our Zero Harm policy
• Access to employee resource and support groups

Required Skills & Qualifications

• Experience in BMS & HVAC systems (AHUs, FCUs, chillers, etc.)
• Familiarity with Trend, Tridium, or Metasys systems preferred
• Understanding of control panel wiring diagrams and MCC panels
• HNC/HND or equivalent in Electrical, Electronic, or Software Engineering
• Knowledge of BMS networking topologies and communication protocols
• Strong communication skills, both verbal and written
• Clean UK driving license

Additional Information

• Semi-mobile role, typically one site per day

• Focus on small works identified during service visits

• Ideal for candidates based in London and surrounding counties

#LI-DC1

#LI-Hybrid

Ready to find the right role for you?

Salary: competitive salary plus Veolia benefits and company van

Hours: 37.5 hours per week

Location: Mobile - Covering sites in the London area

When you see the world as we do, you see the chance to help the world take better care of its resources and help it become a better place for everyone.

Whether you’re looking to overhaul the industry, or just do a good day’s work, we know that everyone here at Veolia can help us work alongside our communities, look after the environment, and contribute to our inclusive culture.

What we can offer you:

25 days of annual leave plus bank holidays

Refer an Engineer to us once you’ve joined and earn £1000

Access to our company pension scheme

Free physiotherapy service

Discounts on everything from groceries to well known retailers

Access to a range of resources to support your physical, mental and financial health; so you can lean on us whenever you need to

Ongoing training and development opportunities, allowing you to reach your full potential

What you’ll be doing:

Travel daily to client sites to carry out planned and reactive maintenance of combined heat and power units.

Safely operating and maintaining all site CHP plants ensuring full service delivery in line with contracted KPIs.

Using Computer based diagnostic tools to fault find on a range of plant equipment.

Interaction with our clients on a daily basis to meet their needs and deliver excellent customer service.

The ability to work alone as well as part of a team.

What we’re looking for:

Qualified to minimum O.N.C or equivalent in an engineering subject and have appropriate experience in mechanical/electrical engineering

Knowledge and experience of CHP plants and systems, heat exchanging equipment and Power generation.

Have a sound understanding of electrical fault finding and rectification

Gas Safe qualification would be an advantage but not compulsory as training will be provided for the right candidate.

In depth knowledge of CHP control systems and PLC’s and to be fully conversant with Fuel mapping procedures on MTU, MAN and 2g units

Full UK driving licence.

Have qualifications and or experience on engine maintenance and the ability and desire to be trained by an engine manufacturer if required

Have sound knowledge in engineering practices and be conversant with the operation of a CHP plant

Undertake weekend roster duties as required by managementWhat’s next?

Apply today, so we can make a difference for generations to come.

We’re proud to have been named as one of The Sunday Times Best Places to Work for three consecutive years in 2023, 2024 and 2025. This consistent recognition reflects our commitment to our people, demonstrating that Veolia is not just transforming the environment, we’re also transforming what it means to have a rewarding, purposeful career.

We’re dedicated to supporting you throughout your application journey, offering adjustments where reasonable and appropriate. As a proud Disability Confident Employer, we will offer an interview to applicants with a disability or long-term condition who opt-in to the Disability Confident scheme, and meet the minimum criteria for our roles.

We’re also committed to ensuring that all applicants and colleagues receive fair treatment without discrimination on any grounds, aiming to create a diverse and inclusive workplace where everyone can thrive

Service | Installation | Commissioning
London
Competitive Salary + Van + Benefits
Full-Time | Permanent

Join a Specialist Smoke Ventilation Engineering Team

We are working with a growing and highly respected smoke ventilation specialist delivering life-safety projects across residential, commercial, and mixed-use developments throughout the UK.

Due to continued growth, we are looking for experienced Smoke Ventilation Engineers across Service, Installation, and Commissioning disciplines.

Whether your background is primarily service-based, installation-focused, or commissioning-led - we want to hear from you.

The Role

You will be responsible for working on a wide range of smoke ventilation and life safety systems, ensuring compliance, safety, and performance across projects.

Installation, wiring, and maintenance of AOV and smoke control systems
Commissioning and functional testing of smoke ventilation systems
Fault-finding and diagnostics on control panels and associated systems
Planned Preventative Maintenance (PPM)
Ensuring compliance with Approved Document B, BS EN 12101, BS 9999, BS 9991, BS 7346-8
Completing commissioning reports and service documentation
Working safely at height where required
Supporting and mentoring junior engineers (senior level roles) What We are Looking For

Experience working with smoke ventilation / AOV systems
Strong knowledge of control panels and electrical systems
Experience in installation, servicing, or commissioning
NVQ Level 3 Electrical Installations (or equivalent)
18th Edition Wiring Regulations
ECS / JIB Card
Full UK Driving LicenceDesirable:

Experience with systems such as SE Controls, Teal, Colt, SCS, FDS
PASMA / IPAF / Rooftop Safety
SSSTS (for senior roles)
Extract rate testing and commissioning experience
Understanding of CFD reports (commissioning level)What is in It for You?

Competitive salary (DOE)
Company van & fuel card
Overtime available
Life assurance
Structured progression into senior / commissioning roles
Ongoing manufacturer training
Opportunity to work on high-profile UK projects If you are ambitious, technically minded, and want to develop within a specialist life-safety sector, this could be the opportunity for you. Apply now or get in touch with our Technical Team at TeamJobs.

INDCP

MPI is looking for an ELECTRICAL TEST / COMMISSIONING ENGINEER for our client based in St. Albans

Contract: Temp to Perm

Salary: £16.00 to £20.00 / Hour

The Company is a manufacturer of low voltage switchgear. The position of Electrical Test / Commissioning Engineer would be based between the Company premises located in St Albans and the client’s project sites.

The ideal candidate should have experience in the electrical testing of LV switchboards including such items as protection relays, controls and metering. Experience of PLC systems would be an advantage.

The ability to read and understand electrical schematic diagrams is essential. The ability to test and demonstrate the operation of switchgear at client inspections, either at the Company premises or at project sites, is essential.

The main roles with this position include (but are not limited to) the following:

* Electrical test of LV switchgear and control panels.

* Carry out tests witnessed by clients and their representatives at the Company premises.

* Carry out site acceptance tests witnessed by clients and their representatives at project sites.

* Liaise with clients and their representatives during witness tests in the factory and at project sites.

* Liaise with the Company Directors and Project Engineers.

* Prepare test certificates and associated documentation.

* Carry out wiring modifications when required.

When not fulfilling the main role of electrical testing / commissioning, other duties would include the fitting and wiring of electrical power components together with the installation of main busbar systems within sheet metal enclosures when required

Location: Essex/Herts - (SG/CM/EN/AL)
Job Type: Full-time, Permanent
Sector: Renewable Energy / Domestic Heating / Gas & Heat Pumps

Job Description

We are currently recruiting an experienced Air Source Heat Pump Engineer (ASHP Engineer) with domestic gas qualifications to join our established heating and renewables team.

This role is primarily focused on air source heat pump servicing, fault finding, maintenance, and repair, with additional responsibility for domestic gas boiler servicing and breakdowns across private residential properties in the Essex/Herts area (SG/CM/EN/AL)

This position suits a skilled ASHP / Gas Engineer with strong diagnostic ability, electrical fault-finding experience, and a solid background in domestic heating systems.

Key Responsibilities

*

Service, maintain, and repair air source heat pump systems (ASHP)

*

Fault finding and diagnostics on heat pump systems

*

Domestic gas boiler servicing, safety checks, and minor repairs

*

Breakdown response across ASHP and gas heating systems

*

Electrical fault finding on heating and heat pump systems

*

System upgrades, component replacement, and remedial works

*

Planned preventative maintenance (PPM)

*

Warranty and insurance repair work

*

General plumbing work related to domestic heating systems

*

Provide clear technical explanations and customer support

Essential Skills & Qualifications

*

Domestic gas qualifications: CCN1, CENWAT, CKR1, HTR1

*

Proven experience as a Domestic Gas Engineer

*

Hands-on experience with air source heat pump servicing, fault finding, or repairs

*

Formal ASHP qualification (Level 3 Heat Pump / manufacturer training)

*

Electrical fault-finding experience

*

Strong plumbing and domestic heating knowledge

*

Full UK driving licence

*

Good customer-facing and communication skills

Desirable (Not Essential)

*

Commercial gas qualifications or experience

*

Boiler installation experience

*

LPG qualifications

*

Renewable energy background beyond ASHP

Salary & Benefits

*

Company van and fuel card

*

Company tablet and mobile phone

*

Uniform, tools, and FGA provided

*

29 days annual leave, increasing with length of service

*

Pension scheme

*

Overtime available

*

Ongoing renewables and heat pump training

*

Long-term career progression within the renewable sector

Salary: £40,000 – £55,000 per annum (DOE) + 6-monthly discretionary bonus
Location: North London & Home Counties (M40–M11 corridor) – Essex base acceptable
Job Type: Full-time, Permanent

Role Overview

We are seeking an experienced Passenger Lift Engineer to join a growing specialist lift services business. This is a field-based role covering North London and the surrounding Home Counties, ideally suited to a engineer based north of London or along the M40–M11 corridor. An Essex base is also acceptable.

You will be responsible for the maintenance, troubleshooting, inspection, and repair of passenger lifts, ensuring all equipment operates safely, reliably, and in full compliance with relevant regulations. This role offers remote working, with no requirement to be office-based.

Key Responsibilities

*

Carry out planned and reactive maintenance on passenger lifts

*

Diagnose faults and undertake repairs to minimise downtime

*

Conduct routine inspections and identify potential issues

*

Ensure all works comply with LOLER, SAFed, and relevant safety standards

*

Complete accurate service reports and documentation

*

Provide a professional and customer-focused service at all times

Requirements & Qualifications

*

Proven experience in passenger lift maintenance and troubleshooting

*

Minimum NVQ Level 3 qualification in Passenger Lifts

*

Strong maintenance and repair skillset

*

Excellent problem-solving and fault-finding abilities

*

Strong communication and teamwork skills

*

Ability to work independently and perform effectively under pressure

Training & Development

*

Opportunity to receive in-house training on platform lifts

*

Significant support and mentoring from senior technicians with multi-decade industry experience

Benefits

*

Competitive salary of £40,000 – £55,000 depending on experience

*

Company vehicle provided for full-time use

*

6-monthly discretionary performance bonuses

*

Remote working and flexible field-based role

*

Long-term career development within a fast-growing business

Job Title: Electrical Maintenance Engineer (HVAP)

Location: Harrow, Greater London

Package: Up to £50,000

Working Hours: Monday to Friday, 8:00am - 5:00pm

Out of hours schedule: 1 in 7 weeks Call Out + Attending Shutdowns

About the Role:

We are seeking a skilled and motivated Electrical Maintenance Engineer, ideally with HV experience, to join our client’s team covering a commercial campus in Harrow, London. This is an exciting opportunity for an experienced professional to join an esteemed facilities company that values quality and customer satisfaction.

Key Responsibilities:

* Carry out Planned Preventative Maintenance (PPM) and reactive tasks on electrical & basic mechanical systems.

* Perform maintenance and repairs on fire alarms, emergency lighting, sprinklers and other compliance systems.

* Carry out checks to building equipment and systems such as Generators, UPS, AHU/FCU’s, Motors, Pumps, LTHWS etc.

* Undertake HVAP training, performing switching tasks as per schedule.

* Diagnose and resolve M&E faults quickly and efficiently.

* Ensure all work is carried out in compliance with health and safety regulations.

* Participate in a 1 in 7 call-out rota to provide emergency support.

* Participate in site shutdowns quarterly

Requirements:

* Required: Minimum Level 3 in Electrical Installation or Engineering plus 18th Edition

* Proven experience in a similar M&E maintenance role.

* Strong knowledge of commercial building systems.

* Acknowledgment that HV switching will be expected in this role

* Ability to work independently and manage your workload effectively.

If you feel you will be a great match to this position, then please apply to await a call from one of the team here at Invictus. Please call (phone number removed) to speak directly with James as the hiring consultant

Company Profile

CBRE is the global leader in real estate services and leverages the industry’s most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries.

Job Title: Multi Skilled Engineer

CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Engineer to join the team located in London.

The successful candidate will perform Electrical and Mechanical Maintenance to both Plant, Equipment and Building Services.

Role Summary:

*

Identify and manage the risks to the client through the equipment on site, including updating drawings, identifying critical spares, improving performance of machinery, improving and implementing the preventative maintenance program

*

Using new equipment and technologies to maintain a working production environment liaising with the client on any requests for certain machinery PPM’s

*

Fault finding on all types of Machinery

*

Support others in the department in relation to Health and Safety

*

Provide Electrical and Mechanical expertise to the Maintenance Department working on Heavy Industrial Machines and Overhead Cranes

*

Write and follow Risk Assessments and be available to question any issues which arise from them safely and accurately

*

Completion of the required documentation as specified with the requirements of all rules and legislation

*

Work on Three Phase Systems with Voltages up to 440V

*

Working on Motors, Gearboxes, Valves encompassing Hydraulic, Pneumatic and Electrical Systems

*

Use Mobile Devices to accurately project and complete any works from the CAFM Maintenance System

*

Use of emailing / calendars to plan your daily work requirements so that all tasks are completed effortlessly and efficiently.

*

Liaise with onsite Site Services to manage any Building Services related issues, responding confidently and accurately as required

*

To be the responsible person when required for the department and deputise the Shift Leader during annual leave or sickness

*

To work overtime as and when the business requires, this may include nights and weekends to which notice may not always be given

*

Perform adhoc duties as and when required

Experience Required:

*

A Recognised or Time Served Apprenticeship

*

Strong proven experience in manufacturing maintenance

*

Electrical Competences / Qualifications to a minimum or equivalent to City and Guilds 236 Pt 1-2 Electrical qualifications to 17th Edition

*

Mechanical Competences / Qualifications to an acceptable standard to City and Guild’s Mechanical

*

Good multi skilled ability

*

Experience working on 3 phase motors, drives and inverters

*

Hydraulic / Pneumatic Experience

*

Ability to fault find

*

PLC Diagnostics / Repair Competencies

*

NVQ Qualifications to Level 2, Electrical and Mechanical

*

Ability to supervise contractors

*

Able to write Risk and Method Statements

*

Able to understand and write Permits

Company Profile

CBRE is the global leader in real estate services and leverages the industry’s most powerful knowledge base to meet the commercial real estate needs of its clients worldwide. Our vision is to be the preeminent, vertically integrated, globally capable real estate service firm. Globally we employ over 70,000 employees and operate in 48 countries.

Job Title: Electrical Bias Engineer

CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management. We are recruiting an Electrical Bias Engineer to join the team located in London.

The successful candidate will be able to install and maintain new plant and equipment when required, ensuring that plant faults and defects are swiftly rectified.

Role Summary:

* React to breakdown maintenance requests within the required SLA’s.

* Technical awareness of computer room/call centre/trader operations and experience of power, UPS, CPS, distribution, cooling etc.

* Repairs to modular UPS systems.

* Test and diagnose power quality issues including harmonic distortion using onsite power analysers.

* Able to apply a risk focused maintenance approach and operations of plant and systems in data centres/critical environments.

* Provide emergency response standby, call out

* Escalate urgent issues identified through to the Technical Services Manager

* Respond to work interruptions, outages or emergencies consistent with the SLA.

* Responsibility for ensuring all critical related engineering maintenance documentation & records are kept updated

* Advise the Facilities Management Team of changes in critical environment requirements.

* Must be willing to work over & above contractual hours.

* Undertake site surveys & produce Works Requests, Method Statements & Risk Assessments for planned works.

* Undertake Upgrade & Install work.

* Understand and interpret technical drawings / instructions / processes & O&M’s

* Ensure completion of all reactive Helpdesk Requests

* Monitor and analyse environmental conditions, review the loading/working conditions of critical equipment regularly.

* Ensure that financial processes are adhered to at all times.

* Complete an incident report for all abnormal incidents affecting systems availability (draft prepared within 24 business hours of an incident)

* Determine the root cause and action items required to restore availability and prevent a recurrence.

* Review and submit to the Technical Services Manager ensuring all actions are documented reviewed and completed.

* Entering relevant quotes and remedial works onto the in-house system

Experience Required:

Essential

* 17th/18th Edition Electrical Wiring Regulations

Data Cabling Engineer (x2) – Permanent London/Surrey

£30,000 – £35,000 + Van + Fuel Card + Overtime
Majority of work in London
Start: ASAP

We are currently recruiting 2x experienced Data Cabling Engineers to join a growing specialist contractor delivering structured cabling and fibre installations across commercial projects.

This is a permanent opportunity offering stability, overtime and long-term progression.

The Role:

*

Installation, testing and termination of Cat5 / Cat6 cabling

*

Fibre installation, termination and testing

*

Working across commercial projects (primarily London-based)

*

Overseas project opportunities (must be willing to travel when required)

✅ Essential Requirements:

*

Valid ECS card with Data qualification listed (essential)

*

Proven structured cabling and fibre experience

*

Able to pass high-level security clearance (processed by employer)

Desirable:

*

IPAF

*

PASMA

What’s on Offer:

*

£30,000 – £35,000 salary (DOE)

*

Company van & fuel card

*

Overtime available

*

Permanent role with long-term opportunity

Intermediate Electrical Engineer - Building Services
London

We are working with a leading, design-led building services consultancy with a London office that is entering an exciting growth phase. With ambitious plans to double revenue over the next three years, this is a perfect time to join the team and make a real impact.

They are seeking an Intermediate Electrical Engineer to support the electrical design team across multiple sectors and project scales. This role is ideal for someone looking to develop technical expertise, contribute to high-quality projects, and progress towards chartership within a fast-growing and supportive environment.

The Opportunity
As an Intermediate Electrical Engineer, you will:

Produce electrical design drawings, calculations, reports, specifications, and schedules
Support compliance with BREEAM and other sustainability legislation
Witness test and commission installations to ensure quality and performance
Undertake non-intrusive surveys and spatial planning for plant areas
Collaborate with senior engineers, associates, and multidisciplinary teams to deliver projects on time and budget
Assist in mentoring junior engineers and contribute to quality checking of outputs
Attend and contribute to design and project meetings, liaising effectively with clients and stakeholders
Keep up to date with legislation, standards, emerging technologies, and product developments
Support the London office in achieving ambitious revenue and growth targets by contributing to high-quality project deliveryThis is a role where you can take ownership of technical tasks while learning from senior colleagues and contributing to a team-wide growth strategy.

What They’re Looking For

Engineering degree preferred; HNC/HND or equivalent considered
Alternatively, construction site experience with a completed electrical apprenticeship
Ambitious, self-motivated, and a strong team ethic
Good communication, problem-solving, and interpersonal skills
Computer literate with CAD or Revit experienceDesirable:

Chartered or actively working towards chartership
Experience using IES software for thermal analysis
Multi-disciplinary understanding of building services
Membership of CIBSE or Institution of Engineering and TechnologyWhy This Role?
This is a fantastic opportunity to join a high-growth London office at a pivotal moment. You’ll work across diverse projects, develop your technical expertise, progress towards chartership, and be part of a team that values innovation, collaboration, and excellence.
For an ambitious electrical engineer looking to accelerate their career and grow with a successful consultancy, this role provides both responsibility and visibility, as well as the chance to directly contribute to the office’s growth ambitions.

Apply now or reach out to Roberto Sartori on (phone number removed) for a confidential chat.

Aldwych Consulting values diversity and promotes equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all sections of society and are happy to discuss reasonable adjustments and/or additional arrangements as required to support your application.

Candidates must be eligible to live and work in the UK.

For the purposes of the Conduct Regulations 2003, when advertising permanent vacancies we are acting as an Employment Agency, and when advertising temporary/contract vacancies we are acting as an Employment Business

South West London (Can be located: Twickenham, Richmond, Wembley, Epsom, Weybridge, Sutton, Croydon and all surrounding areas)

£38,000 (OTE: £50,000) + Overtime + Training + Progression + Door-to-Door pay + Benefits + Van

Do you have Electrical experience and/or qualifications looking to receive full Multi-skilled Engineering Training whilst having the opportunities to maximise your earnings through travel time pay and overtime?

On offer is a field-based role for a nationally-renowned manufacturer which are known for looking after their staff through long term job stability whilst also rewarding through great benefits.

The company are a global business, multi-million pound operation and supply directly into High End Commercial. They have leading contracts with Hotels, Bars and Restaurants.

In this Monday - Friday days based role, you will be required to travel to various customer sites within a very local patch. You will be responsible for Service, maintenance and repairs on Electro-mechanical equipment involving 3-phase and wiring

This role would ideally suit an Electrically qualified Engineer looking to technically progress their career within a stable role with great on target earnings.

The Role:

Service and maintain Commercial equipment.
Field based (local/ no overnight stays).
Monday - Friday flexible working.
The Person:

Electrical qualifications.
Full UK driving license.
Located in SW London.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.

We are an equal opportunities company and welcome applications from all suitable candidates

As an Electrical Service Engineer, you will be responsible for the maintenance, inspection, testing and fault-finding of LV and HV switchgear and associated power distribution equipment. The role is primarily site-based, combining hands-on technical work with direct customer interaction. You will support critical electrical infrastructure, ensuring systems operate safely, reliably and in line with relevant standards and procedures.

This position suits an engineer with a strong electrical background, confident working on live environments where downtime must be minimised and safety is essential.
The ideal candidate will be experienced in electrical power systems and will strictly adhere to Health, Safety, Environmental and Quality requirements at all times.

Job Responsibilities:

* Carry out planned and reactive maintenance on LV and HV switchgear, including switchboards, distribution boards, breakers and protection devices.

* Diagnose and rectify electrical faults on power distribution systems in operational environments.

* Perform inspection, testing and verification of electrical installations in accordance with relevant standards and site procedures.
Support commissioning activities for new or modified LV and HV switchgear installations.

* Assist with testing and verification of electrical interfaces to power monitoring, metering and control systems.

Experience required:

* Strong background in electrical engineering with proven experience.

* Ability to safely carry out fault-finding, maintenance and testing on electrical systems.

* Relevant electrical qualifications (for example NVQ Level 3, City and Guilds, HNC or equivalent).

* Basic awareness of power monitoring, metering, instrumentation or control panels is advantageous

Electrical Engineer (Commercial)

Manchester or Yorkshire

£40,000 - £45,000

About FMServ

FMServ is a leading provider of mobile technical services and facilities management solutions based in Warwickshire and serving clients across the UK. Established in 2018 we provide a ‘one stop shop’ for all commercial and residential property development and reactive maintenance.

FMServ offers a nationwide commercial property maintenance service, including 24-hour emergency call-outs and other small works.

Due to continual year on year growth, as of 2025 we employ over 75 employees across the UK and are expanding.

Job Description

Commercial Electrical Engineer

Location: Mobile (Scotland – Glasgow, Edinburgh)

As a Commercial Electrical Engineer you will have overall responsibility for the works you carry out on site. The primary role of this position is to carry out the required works to ensure that the correct and compliant working order of electrical systems.

You will be expected to have good customer service skills with the ability to engage and interact with customers as and when required.

What we offer you

FMServ are a national medium sized, established Facilities Management company. Our processes have been designed to make life easier for our field engineers who are fully supported from our head office based within Warwickshire. Our professional, flexible approach have won us clients such as the NHS, Virgin Media, Barclays and others. As we continue to grow we can offer continual development, good career prospects should you be seeking progression, reliable work with fully vetted clients, and a dependable dedicated team supporting you with your day-to-day workload.

Responsibilities

The Commercial Electrical Engineer will be carrying out:

· Small project work

· PPM (planned preventative maintenance) work

· Reactive and emergency jobs

· Electrical Fault Finding

Qualifications / Experience

To be successful in the Commercial Electrical Engineer role you must have:

· 18th edition electrical qualification

· Have experience in the commercial sector

· At least 3 year’s experience working in a FM company

· Full UK Driving Licence

· Ideally 2391

Attributes and Qualities

* Confident and professional demeanour

* Good customer service skills

* Proactive approach

* Good level of written and oral communication skills

* Excellent interpersonal skills

* Able to meet deadlines

Benefits and what’s provided

· 40h per week

· Optional overtime

· Potential weekend working

· 20 Days holiday

· Company pension

· Company vehicle

· Fuel card

· Mobile phone

· Uniform

· PPE

· Specialised tools

· (Must have own hand and power tools)

Job Types: Full-time, Permanent

Benefits:

* Company pension

* Employee discount

* Referral programme

Work Location: On the road

Dedicated to sustainable development, Arup is a collective of designers, consultants and experts working globally.
At Arup you will have the opportunity to collaborate on ambitious projects - delivering remarkable outcomes for clients and communities, and to do socially useful work that has meaning.
Arup’s purpose, shared values and collaborative approach has set it apart for over 75 years, and now is your opportunity to join.

Job description - the role

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies.
We partner with Arup to support their contingent recruitment processes. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed.
On Behalf of Arup, we are looking for a Senior Electrical Engineer for a 12 Month contract can be based in Cardiff, Birmingham, Bristol or Nottingham.

Candidate Profile: Key accountabilities, skills & experience

Purpose of the role:
Aviation Maintenance, Repair & Overhaul (MRO) design team, delivering electrical building services and specialist aircraft systems for complex aviation facilities. This role involves leading electrical design, supporting multidisciplinary project teams, and guiding junior engineers across a range of aviation projects.

What you’ll do:

• Lead electrical design and coordination for aviation and MRO hangars.
• Manage project stages from feasibility and concept through to detailed design, construction, commissioning, and handover.
• Work directly with clients, contractors, and internal multidisciplinary teams.
• Produce and review specifications, drawings, and technical documentation.
• Mentor junior engineers and support business development activities.
• Apply knowledge of aviation-specific systems such as: 400Hz aircraft ground power, or DSEAR and ATEX design requirements

The skills you’ll need:

• Degree in Electrical or Building Services Engineering.
• Strong experience in aviation projects, particularly MRO facilities.
• Proven project delivery experience across multiple stages.
• Ability to lead multidisciplinary design teams and engage with external partners.
• Knowledge of aviation regulations, sector-specific standards, and future trends.
• Interest in sustainable and low-carbon building design

About the client

About the client
Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. Guided by its values and alignment with the UN Sustainable Development Goals, Arup creates and contributes to equitable spaces and systems, while cultivating a sense of belonging for all. Arup’s internal employee networks support their inclusive culture: from race, ethnicity and cross-cultural working to gender equity and LGBTQ+ and disability inclusion - creating a space for everyone to express themselves and make a positive difference.
If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and speak to one of our Sourcing Specialists.
AMS are committed to providing all our candidates with the opportunity to perform at their best throughout the recruitment process. Please let us know if you require any additional support or reasonable adjustments during the screening process and we will work with you and Arup to identify the best solution to meet your requirements.
AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business.

Job Title: BMS Controls Engineer (Self-Employed)

Location: London & Surrounding Areas
Rate: Competitive (Self-Employed / Contract)
Start: Immediate / As Soon As Possible

We are currently recruiting for an experienced BMS Controls Engineer to work with one of our established clients who specialise in the manufacture and installation of electrical and HVAC systems within data centres across London and the surrounding areas.

This is an excellent opportunity for a skilled engineer to join a growing workload of projects within the data centre sector. The role is offered on a self-employed basis, however for the right candidate this could lead to ongoing long-term work.

Key Responsibilities:

• Installation, commissioning, and maintenance of Building Management System (BMS) controls
• Working on electrical and HVAC control systems within data centre environments
• Fault finding, testing, and system optimisation
• Reading and interpreting technical drawings and control schematics
• Ensuring work is completed to industry and site standards

Requirements:

• Proven experience as a BMS Controls Engineer
• Relevant electrical / controls qualifications
• Experience working with HVAC systems and BMS within commercial or data centre environments
• Ability to work independently and manage tasks on site
• Strong fault-finding and commissioning skills

If interested and feel you may be suitable, please apply or contact Josh at Interaction Construction – 02392 706621 / 07811305225

INDC

The Role

We are seeking a skilled and professionalMobileAirConditioningEngineerto join our team, delivering high-quality planned and reactive maintenance services across our client portfolio.

This is an excellent opportunity for an experiencedengineerwho takes pride in their work, understands compliance requirements, and can confidently represent the business in front of clients.

The successful candidate will focus primarily onairconditioningsystems while also supporting first-line reactive maintenance on electrical and switchgear systems.

What We Offer

• £44,000 £46,000 basic salary
• Company van (available for personal use tracked; waiver required)
• Fuel card
• Tools, tablet, and uniform provided
• Overtime paid at enhanced rates:

Key Responsibilities

Deliver PPM, proactive, and reactive maintenance within agreed SLAs

Ensure full compliance with Health & Safety regulations including:

Risk Assessments

F-Gas regulations

Low Voltage Safe Systems of Work

COSHH

Diagnose and repairairconditioningsystems to a high standard

Provide first-line reactive maintenance on electrical and switchgear systems

Participate in a minimum 1-in-4 out-of-hours callout rota

Undertake occasional planned night works as required

Carry out contractor control duties including:

Monitoring contractor workmanship

Ensuring compliance with standards

Issuing Permits to Work

Ensure all equipment operates to specified performance criteria

Maintain accurate documentation and asset information updates

Represent the company professionally at all times

Proactively manage client communication and expectations

What Were Looking For

Proven experience inairconditioningmaintenance and repair

F-Gas qualification (essential)

Strong understanding of H&S compliance requirements

Experience working within SLAs

Ability to work independently and manage workload effectively

Professional and client-focused approach

Company description:

At Warburtons, family is at the heart of our business.

Job description:

Shift Pattern: Monday to Friday Days based role

Salary:up to £70,000 per annum depending on experience and skills

Benefits include: profit related bonus, 5 weeks of annual leave (opportunity to buy more), award winning pension scheme and benefits for you and your family.

Location:Brimsdown, North London

Accessible from:M25 (15 mins), Brimsdown Overground (10 mins walk), Tottenham Hale & Liverpool Street Station

Are you aSoftware Controls Engineer,Automation Engineer or an Electrical Engineer with a passion for automation and improving plant performance?

Due to retirement, we have an exciting opportunity for a Software Controls/Automation Engineer. Working in a day-based role as part of a highly skilled and well-established engineering team, youll be driven and skilled at both delivering automation improvement solutions and in finding and rectifying faults on plc-controlled equipment and networks.

AstheUKs No.1 Bakery Brandand ranked in the top 5 ofThe Grocers Top 100*list of Britains Biggest Brands, Warburtons is a name you can be proud of. We’ve been baking since 1876 and remain a fifth-generation family business with the sixth generation now part of our journey

Warburtons is built on strong values, a commitment to quality, and pride in everything we do.

At our Enfield site, youll join around 500 colleagues and work across 5 operating plants all within a culture that values teamwork, development, and innovation.

Now is a great time to join a business thats thriving, evolving, and investing in the future.

The Recipe

Youll be working in collaboration with our existing Software and Controls Engineers to maintain all software, hardware infrastructure and control systems. Youll also identify and complete continuous improvement projects to increase plant efficiency, reduce downtime and save energy and associated costs.

Your work will focus on improving plant performance and efficiency, supporting in breakdown resolution followed by leading the investigation into route cause analysis (RCA) to prevent future occurrences. Youll enjoy the variety of a manufacturing environment and be keen to get involved in other work such as safety teams and improvement initiatives.

Youll be encouraged and supported to foster new ideas and perspectives whilst driving change. We promote a culture of continuous improvement whilst working on a changing approach to reliability centred maintenance in a highly automated production facility.

The Role

• Requirement to ensure knowledge of latest technologies and practices are continually updated with opportunities identified to optimise manufacturing processes
• Safety - Adherence to relevant safety standard across all activities (including external contractors). Ensure plant controls are safe to operate, maintain and personnel conform to health & safety legislation, policies and standards.
• Through effective software and hardware management processes, supports and manages site implementation of a Business led engineering reliability strategy.
• Support the development of site revenue and capital budgets, whilst identifying and leading the execution of relevant capital projects.
• Drive a proactive Engineering Continuous Improvement culture cross-functionally. Through contributing to the improvement and development of manufacturing hardware & software activities
• Training and coaching of Engineers to an agreed working knowledge in PLC / control systems to ensure they have the required competency and capability to support bakery performance
• Ensure supplier contract content & supplier relationship is maintained, and supplier effectiveness is reviewed.

Essential Ingredients

• Youll have a strong drive to identify opportunities for equipment improvement using plant-based automation and related solutions to help improve efficiency and performance.
• Experience in fault finding and maintaining existing control systems, preferably with Allen Bradley (Rockwell) platforms (RSLogix500, Logix5000 etc.)
• Experience of software development and programming languages including ladder logic
• Knowledge of communication protocols and networks
• Strong electrical knowledge and understanding of control related systems
• Knowledge and experience of project management
• Knowledge / awareness off functional safety
• Proven experience of improvements resulting in a reduction of breakdowns or increased efficiency
• Formal electrical automation training with an awareness of process and mechanical engineering.

Extra Dough

Last but by no means least, you’ll want to know what your breads worth.

• A slice of the annual profits (discretionary profit share)
• Family time is important to us so as well as your holiday entitlement, we’ll give you the opportunity to purchase up to an extra weeks annual leave
• Award winning pension scheme with company contributions
• Life assurance
• Products you will love along with deals and discounts for you and the family through our Extra Dough website
• Continued investment in your personal development
• Fully stocked kitchens filled with our delicious products for you to enjoy with your daily brew!
• Support for your health and wellbeing, including access to free physiotherapy, 24/7 access to a confidential helpline for practical advice and a comprehensive occupational health service
• Access to24-hour virtual GPthrough our Help at Hand App which also includes counselling and life coaching sessions.
• Free on-site parking
• Canteen
• Cycle to work scheme
• Payroll giving scheme

We respect and value difference. We look to create an inclusive workplace that promotes and values diversity. Companies that are diverse in age, gender identity, race, religion, sexual orientation, physical or mental ability, ethnicity, or any other aspect which makes them unique, are proven to be better companies. More importantly, creating an environment where everyone, from any background, can do their best work, is the right thing to do.

ELECTRICAL MAINTENANCE ENGINEER Job Title - Electrical Maintenance Engineer
Location - Mitcham
Salary: £47,000
Shift: M-F Days

Job Role of the Electrical Maintenance Engineer. A fantastic opportunity which is not to be missed by strong Maintenance Engineer has come to the forefront. This is going to be any engineer’s dream to work in a Large Industrial recyling plant. They have recently invested into the site and it’s a great place to work for any maintenance engineer who wants to develop their career both technically and/or into management.

You will be responsible for carrying out electrical maintenance, fault-finding, and planned preventative maintenance on a range of fully automated production machinery, ensuring maximum uptime and efficiency.

Sector - Industrial Manufacturing

Non-Negotiable Requirements of the Electrical Maintenance Engineer Electrical maintenance experience within an industrial manufacturing environment.

Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory.

Essential requirements for the Electrical Maintenance Engineer. Hands-on electrical fault-finding experience.
Recognised electrical engineering qualification.
Experience working within a manufacturing or Industrial environment.

Desirable Requirements for the Electrical Maintenance Engineer. Experience working as a Maintenance Engineer in the UK.

The Electrical Maintenance Engineer will benefit from: Working for a market-leading manufacturing business.
Company benefits package including pension, life insurance, and gym access.
Training and development opportunities.

If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.

For further details contact Waheed Anjum at Pioneer Selection

As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Junior Fire & Security Engineer
Location: London
Salary: 25,000 - 30,000
Job Type: Full-Time, Permanent

An award-winning fire and security company based in London is looking for a motivated Junior Fire & Security Engineer to join their expanding team. With a strong reputation for excellence and innovation in the industry, the company has trained and developed some of the most skilled engineers in the UK. This is an outstanding opportunity for someone with at least 1 year of experience in fire and security, electrical work, or data cabling to grow their career, gain hands-on experience across a wide range of systems, and work alongside a highly professional, supportive team committed to delivering the highest standards to their clients.

What’s on Offer:

• Salary of 25,000 - 30,000 depending on experience
• Paid training and development opportunities to fast-track your career
• 25 days holiday plus bank holidays
• Company vehicle or mileage allowance
• Supportive and professional team environment

Your Role Will Include:

• Installation, servicing, and maintenance of fire and security systems
• Assisting with fault finding and troubleshooting on-site
• Working across a variety of systems including CCTV, intruder alarms, access control, and fire alarms
• Supporting senior engineers on larger installations and projects
• Ensuring work is completed to the highest quality and complies with industry standards

Desirable Skills & Experience:

• At least 1 year of experience in fire and security, electrical work, or data cabling
• Electrical improver / electrician experience desirable
• 1st fix and 2nd fix experience
• Pulling cables, cable terminations, patch panels
• Knowledge of CAT5 / CAT6 / network infrastructure and data cabling
• Ability to use hand tools and perform cable routing (trunking, tray, conduit, basket)
• ECS / CSCS card, IPAF / PASMA desirable
• Some prior experience installing CCTV or electronic security systems is advantageous

This is a fantastic opportunity for a motivated engineer to join a company recognised for training and developing the best in the industry, gaining invaluable hands-on experience and career progression.

Interested?
If you’re looking for a fresh opportunity with a company that values its engineers and invests in their development, we’d love to hear from you.

Apply today or send your CV to (url removed). For a confidential conversation, feel free to call and ask for Jordan.

Alecto Recruitment Ltd is acting as an employment business in relation to this vacancy.

YOU MAY BE A; Fire & Security Engineer, Fire Alarm Engineer, Fire Alarm Technician, Fire and Security Technician, Fire Alarm Service Engineer, Service Engineer, Intruder Service Engineer, Security Engineer, Intruder Alarm Engineer, Fire Engineer, Electrical Engineer, Maintenance Electrician, Electrician.

INDAV