Maintenance Electrician

An opportunity has arisen for an experienced Electrical Maintenance Engineer to carry out the PPM and Reactive activities in accordance with our contractual agreements for Liverpool University

Day to day duties for this role include but are not limited to;

• Maintain a close liaison and working relationship with the Engineering Team, Contract Delivery Manager and Engineering Manager
• Attend all allocated Internal/External training courses.
• Completion of SFG20/HTM PPMs, reactive and proactive tasks and in turn update the CAFM system via PDA to meet contractual obligations.
• Ensure that daily checks are completed and repair or report any defects using the helpdesk or reactive works ticketing system via PDA
• Maintain accurate records for both ppm and reactive works
• Ensure Electrical engineering standards are maintained in order to maximise efficient operation and reliability of plant and associated systems
• Ensure any accidents and near misses are reported to line managers
• Maintain and supervise, issues arising, ongoing works, special task requests, standard of housekeeping
• Comply with both statutory and company health, safety and environmental regulations and policies.
• Timely implementation and recording of all statutory inspections including accurate recording of all electrical work undertaken
• Where necessary be available to attend out of hours calls when required and provide site cover OOH on planned event days.
• Control of 3rd party contractors including monitoring of work performance and standards, including internal auditing where applicable in conjunction with the Contract Delivery Manager /Engineering Manager
• Ensure that Specialist Service Provider worksheets are signed off that quality of work is inspected, and recommendations are escalated to the Contract Delivery Manager
• Ensure that Plant areas, workshops, stores, changing/rest areas etc. are kept to the highest level of housekeeping
• Will be expected to operate, and trouble shoot all building systems but not be limited to the following: BMS and electrical monitoring, Air handling / conditioning, Domestic water services, Fire prevention and detection systems, AC, DC single phase and three phase systems, associated controls, Low voltage switch gear and medical equipment as required.

Essential skills, knowledge and experience:

• C&G Level 2 and 3 Diploma Electrical Installation
• 18th edition certificate
• Strong Electrical & Mechanical Maintenance experience
• Sound understanding and experience of meeting Health & Safety obligations with regard to maintenance activities
• Must be prepared to work out of hours when required and participate in a call out rota.
• Have good communication and organisation skills
• Have a positive can do attitude
• Ability to work on own or as part of a team

What you can expect from us

Youll join an entrepreneurial, inclusive culture. One where we succeed together across the desk and around the globe. Where like-minded people work naturally together to achieve great things.

Join us to develop your strengths and enjoy a fulfilling career full of varied experiences. Keep those ambitions in sights and imagine where Integral and JLL can take you…

Location: Wirral
Salary - Competitive and negotiable, dependent on experience.

We are working with an established provider of electrical engineering services operating across marine, industrial, commercial, military, and offshore sectors. With particular expertise in marine electrical systems, the organisation delivers a wide range of projects - from minor repairs and maintenance to large-scale refits, across various vessel types and industrial environments, This role is based in Wirral.

As a PLC / Automation Engineer is responsible for designing, programming, testing, and commissioning industrial control systems. The role focuses on developing robust automation solutions using PLCs, HMIs, SCADA systems, and associated instrumentation to enhance performance, safety, and operational efficiency.

Key Responsibilities of PLC / Automation Engineer

Design, develop, and maintain PLC programs for industrial automation systems

Configure and program HMIs, SCADA systems, and industrial communication networks

Develop control system architectures and electrical control schematics

Perform system integration, testing, and on-site commissioning

Troubleshoot and resolve automation, instrumentation, and electrical control issues

Modify and optimise existing automation systems to improve performance

Produce and maintain technical documentations

Collaborate with mechanical, electrical, and process engineers on multidisciplinary projects

Support maintenance teams with diagnostics and training

Ensure compliance with relevant safety standards and industrial regulations

Occasionally attend harbour and sea trials where required

Desirable Experience

Motion control systems

Robotics

Drives (VFDs / servo systems)

Functional safety systems (SIL, safety PLCs)

Industrial networking and cybersecurity

Experience in one or more of the following sectors:

Manufacturing, Oil & Gas ,Marine / Offshore, Water Treatment, Energy

Occasional travel to customer locations, including potential international travel

Work within electrical panels, machinery environments, and industrial settings

Strong attention to detail

Effective communication skills

Ability to work under pressure and meet project deadlines

Maintenance Engineer - Food Manufacturing

Multi Skilled

4 on 4 off (days and nights)

Overview

This is a great opportunity for a maintenance engineer looking to work a rotational 12 hour shift with extended time off between each rotation. One of the areas well know manufacturers are looking to recruit a maintenance engineer and are ready to hire immediately. As a maintenance engineer, you will be joining an experienced and supportive team who have a strong track-record. You will be a key team player in ensuring the factory is running up to speed and production levels are maintained.

Responsibilities for the Maintenance Engineer

• Proactive maintenance and site PMs
• Reactive maintenance and responding to breakdowns quickly
• Working across both electrical and mechanical faults and maintenance
• Working on Engineering projects (e.g. commissioning, installations, relocations)
• Identifying and implementing improvements covering both processes machine output
• Adhering to site Health & safety rules and legislation on site

Requirements for the Maintenance Engineer

• Time-served / recognised apprenticeship (or equivalent) in a relevant engineering subject
• Experience working in a Multi skilled role across mechanical and electrical engineering
• Ability to and experience of working to a fast pace, ideally confident in a manufacturing environment.

If you’re interested in this opportunity and your CV is ready then hit the apply button and expect to hear from me soon. Alternatively, if you’re CV isn’t ready or you just want a quick chat about the role then give me (Gianni) a call on our company number.

By applying to this advertised job, you give consent for The Sterling Choice Ltd to hold your information. Our privacy policy can be found on our website. At your request, this can also be sent to you.

Job Title: Dual Skilled Electrical & Mechanical Engineer
Location: Liverpool
Contract Type: Long-Term Contract
IR35 Status: Inside IR35
Shift Pattern: Days or Shifts Available

Overview

We are currently recruiting Dual Skilled Electrical & Mechanical Engineers on a long-term contract basis for a leading client within the rail rolling stock industry, based in Liverpool. These roles sit within the maintenance team and offer the opportunity to work either day shifts or a rotating shift pattern.

Key Responsibilities

• Carry out planned and reactive maintenance on rail rolling stock
• Fault finding and diagnosis on electrical and mechanical systems
• Perform inspections, repairs, overhauls, and component changes
• Ensure all work is completed in line with safety, quality, and industry standards
• Accurately complete maintenance documentation and reports
• Work collaboratively within a depot-based maintenance team

Essential Requirements

• Qualified in Electrical or Mechanical Engineering
  o Electrical qualification preferred, however strong mechanical backgrounds will be considered
• Experience in a maintenance or engineering environment
• Ability to fault-find and work across electrical and mechanical systems
• Strong awareness of health & safety procedures

Desirable Experience

• Previous rail or rolling stock experience
• Experience working within a regulated or safety-critical environment

Multi Skilled Maintenance Engineer

Knowsley, Liverpool | Competitive Salary | Nights 10pm-6am | Monday-Friday | Permanent

Introduction

Acorn by Synergie are searching for a Multi Skilled Maintenance Engineer to join our client, a well-established manufacturing business based in Knowsley, Liverpool, on a permanent night shift basis. Reporting to the Engineering Manager, the role supports the efficient operation of the factory by delivering effective electrical and mechanical maintenance, ensuring plant reliability and consistent achievement of business targets in line with the planned maintenance programme.

Key Duties

• Carry out routine physical and visual inspections of site machinery.
• Perform planned preventative maintenance (PPM) tasks as issued by the Engineering Manager.
• Respond promptly to machine breakdowns, diagnosing and resolving mechanical and electrical faults.
• Complete repairs, upgrades, and new equipment installations across the site.
• Minimise equipment downtime through effective fault-finding and proactive maintenance.
• Conduct system checks to ensure safe and reliable operation.
• Carry out all duties safely, in full compliance with company Health & Safety and Hygiene policies.
• Work closely with subcontractors, ensuring permits, risk assessments, and method statements are in place and followed.
• Liaise with site supervisors and senior management in the absence of the Engineering Manager.
• Provide accurate information and regular progress updates to management as required.

Requirements

• Time-served Multi Skilled Maintenance Engineer with strong 50/50 mechanical and electrical skill set.
• Recognised engineering apprenticeship and ONC qualification or higher.
• Solid understanding of electrical regulations, including 17th or 18th Edition certification.
• Proven PLC fault-finding and diagnostic experience.
• Hands-on experience with pneumatics, hydraulics, and steam boilers in a manufacturing or industrial environment.

What We Offer

• Permanent night shift role.
• Competitive salary.
• Monday-Friday working pattern.

Interested?

Apply now to join a skilled engineering team and advance your career.

Acorn by Synergie acts as an employment agency for permanent recruitment.

£42,500 + OT + Benefits
Days Only
Widnes
gap technical are proud to be representing this global manufacturing business in their search for an Electrical Maintenance Technician / Engineer to work at their facility based near Widnes
Performance Objectives

• The ideal candidate is self-motivated with a broad base of electrical and instrumentation knowledge, who works well as part of a team or with minimum supervision.
• Design, selection, requisition and installation of the full range of electrical systems including 415V electrics, instrument systems, office systems
• Carry out E&I preventive maintenance and calibration
• Fault location / diagnosis / repair
• Expected to participate in process and H&S improvements
• Biweekly call out

Person Specification

• Recognised qualification to BTEC Level 4 or equivalent
• Certified to 18th Edition Regs
• Familiarity with Permit to Work systems and required documentation
• Experience in the following electrical systems; Motor Control Systems - ‘Direct on Line’ and V.S.D. Control Systems.
• Small Power and Lighting Systems.
• Electrical Power Distribution Systems
• Electrical drawings - understanding and interpretations
• Experience in the following instrument systems; a variety of measured systems eg temperature, flow, pH etc
• 4-20mA systems and PLC control
• PID Controllers (an appreciation of loop tuning effects of gain, proportional band would be beneficial)

Apply

Please send your CV via the Apply now option on the website

If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch

This vacancy is being advertised on behalf of gap technical who are operating as an employment agency.

gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.

Closing Date: 04/03/2026

‘By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy.’

We are seeking an experienced Principal Senior Electrical Engineer for a design role to join the team on a full-time, permanent basis. Hybrid working is available, though office attendance will be required for principal engineers.

Location: Merseyside or Greater Manchester
Salary: Up to £65,000 per annum, dependent on experience and level
Working Arrangement: 36 hours per week, 4 or 5-day working week flexible
Start: ASAP

Key Responsibilities:

• Design electrical systems, including circuitry and schematics, from RIBA Stage 2 onwards
• Produce and review drawings, specifications, and calculations
• Ensure designs comply with regulations, standards, and codes
• Mentor and support junior engineers
• Drive internal processes and continuous improvements
• Attend site surveys and meetings as required

Requirements:

• Minimum 10-15 years’ experience in an electrical design role
• Proficient in Dialux, Electrical OM, Revit, AutoCAD, and Amtech
• Strong understanding of electrical regulations, standards, and codes
• Experience in mentoring or managing junior engineers
• Ability to work on-site when required and collaborate effectively in an office environment

What’s Offered:

• Flexible 4 or 5-day working week
• Hybrid working options available

Interested applicants are invited to apply by sending their most up-to-date CV.

North west (remote)
£40,000- £45,000 basic
Van with fuel card, overtime availability paid at 1.5x and 2x, 42.5 hour week, 25 days holiday, phone, laptop, pension scheme and more

Overview
We are seeking a skilled and dedicatedMobile Generator Engineer to join our team. This is a fully remote role, covering the North West region, where you will work on generators up to 500kVA. If you are passionate about delivering high-quality service and have experience in generator maintenance and repair, we would love to hear from you.

Responsibilities

• Perform maintenance, servicing, and repairs on generators up to 500kVA.
• Diagnose and troubleshoot faults to ensure minimal downtime for clients.
• Conduct routine inspections and testing to ensure equipment is operating efficiently and safely.
• Provide on-site support to clients across the North West region.
• Maintain accurate service records and documentation.
• Adhere to health and safety regulations and company policies at all times.
• Communicate effectively with clients to provide updates and recommendations.

Qualifications

• Proven experience working with generators, including maintenance and repair.
• Strong technical knowledge of generators up to 500kVA.
• Relevant qualifications in electrical or mechanical engineering (NVQ, City & Guilds, or equivalent).
• Full UK driving license.
• Ability to work independently and manage your own schedule.
• Excellent problem-solving skills and attention to detail.
• Strong communication and customer service skills.

Day-to-Day

• Travel to client sites across the North West region to perform generator maintenance and repairs.
• Conduct fault-finding and diagnostics to resolve issues efficiently.
• Ensure all work is completed to a high standard and in compliance with safety regulations.
• Maintain and manage tools, equipment, and company-provided van.
• Provide detailed reports and updates to the management team.

Benefits

• Competitive salary of £40,000 - £45,000 basic.
• Fully remote role with flexibility to manage your own schedule.
• 42.5-hour workweek with overtime paid at 1.5x and double time.
• Company van with fuel card provided.
• 25 days holiday plus bank holidays.
• Pension scheme.
• Company-provided phone and laptop.
• Life insurance and additional benefits.

If you are a motivated and experienced engineer looking for a rewarding role with excellent benefits, apply today to join our team as a Mobile Generator Engineer.
SER-IN

We have an exciting opportunity for a Lead Control Systems Engineer to be based full time onsite at Warrington or Cumbria.

This is a contract role inside IR35 at the market rates.

Candidates can start with BPSS security clearance whilst higher level clearance is being undertaken. You should be British Citizens and passport holders and not have worked outside the UK during the past 5 years.

ROLE SUMMARY:

We are looking for an experienced Lead Control Systems Engineer to take technical leadership of control systems design, implementation, testing, commissioning, and ongoing support across multidisciplinary projects. You will be the technical authority for control systems engineering, ensuring robust, compliant, and high-quality solutions, and driving engineering excellence across the project lifecycle.

This is a hands-on leadership role with strategic influence - ideal for engineers who want to shape architecture, mentor others, and make high-impact decisions.

KEY RESPONSIBILITIES:

Technical Leadership & Design Authority

Lead the development of control systems architecture, high-level and detailed design, and technical standards.

Act as the technical authority for control systems, owning approvals and design decisions.

Drive the selection and integration of PLCs, HMIs, SCADA, communication protocols, safety systems and related automation technologies.

Ensure compliance with relevant industry standards, safety, and regulatory requirements.

PROJECT DELIVERY:

Lead control systems engineering activities throughout the full project lifecycle - from concept and requirements capture to testing, commissioning and handover.

Provide robust control logic design, software development oversight, and verification/validation.

Collaborate closely with project management to ensure quality, schedule, risk, and cost targets are met.

Coordinate with other engineering disciplines to resolve technical interfaces and issues.

TEAM LEADERSHIP & DEVELOPMENT

Lead, mentor, and develop a team of control systems engineers, coach on best practices.

Assign tasks, oversee workload distribution, and review deliverable documentation.

Lead and actively participate in the configuration, programming, and testing of PLC, HMI, and SCADA control systems.

Promote continuous improvement of tools, processes, and standards.

STAKEHOLDER ENGAGEMENT:

Act as the primary technical liaison with clients, partners, and internal stakeholders for control systems.

Represent control systems discipline in design reviews, technical proposals, and client meetings.

DOCUMENTATION & ASSURANCE:

Drive quality and consistency in deliverables including functional design specifications, software and hardware design documentation, test procedures, commissioning reports, and O&M documentation.

Oversee and approve verification and validation testing including internal testing (FAT), customer witness testing (CAT) and site acceptance / commissioning activities.

ESSENTIAL:

Degree in Engineering (Electrical, Control Systems, Automation) or equivalent experience.

Significant experience (typically 8+ years) in control systems engineering in a technical lead or Senior Engineer role.

Expertise with PLC/HMI/SCADA design, programming, and implementation.

Demonstrable experience in configuring and utilising simulation tools to support system testing, validation and verification activities.

Proficient in producing high?quality technical documentation with clarity, accuracy, and consistency.

Proven track record leading medium to large control system projects from design through commissioning.

Excellent stakeholder communication and collaboration skills.

Demonstrable experience mentoring and leading engineering teams.

Strong problem-solving, documentation, and risk management skills.

Knowledge of safety and compliance standards (eg IEC, ISO, industry-specific).

DESIRABLE:

Experience with multiple control platforms (e.g. Rockwell, Siemens, Schneider).

Experience in regulated or complex technical environments (e.g., Energy, Nuclear etc).

Knowledge of Sellafield Engineering Standards.

Knowledge of functional safety and cybersecurity standards.

Professional registration (CEng, IEng) or equivalent.

TV Rheinland is a leading provider of technical services worldwide. We provide a broad range of testing, inspection and certification services to ensure the safety, reliability and regulatory compliance of engineering assets throughout their lifecycle. If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability.

Job Summary
As part of the TUV family, TUV Rheinland Industrial Services (TRIS) are looking to recruit CAT 2 Inspection Engineers for the UK. You can be based in the North West, North East, Humberside and the South.

We are seeking experenced inspectors to join our growing Industrial team to provide Inspection and Certification of pressurised static equipment e.g. vessels, tanks, piping, relief devices, to meet regulatory and client requirements.

We offer comprehensive training, flexible working, and a great pay and benefits package.

Job Description

• Preparing and reviewing Written Schemes of Examination (WSE)
• Identifying preparation requirements from the WSE
• Examination in accordance with the WSE
• Undertaking simple NDT ultrasonic thickness checks, magnetic particle, dye penetrant
• Coordination of NDT providers for extensive requirements or specialist methods,
• Preparation of clear reports including photographs
• Assessment of deterioration
• Reviewing design calculations and sentencing defects
• Coordinating repairs.
• Participation in Risk Based Inspection studies

Education / Certificates

• UKAS RG 2 In-Service Inspection of Pressure Systems (essential)
• HNC/Degree Mechanical Engineering,or equivalent (essential)
• Incorporated Engineer status (desirable)

Experience & Skills

• Good verbal and written communication skills
• Eye for detail
• Ability to accurately follow procedures
• Understanding of engineering principles
• Able to make and defend difficult decisions
• Ability to interact and work with others
• Mechanical Engineering background
• Chemical and/or oil and gas sector experience (desirable)
• Understanding of fabrication or repair of pressure equipment (desirable)
• Experience of non-destructive examination techniques (desirable)
• Man-management experience (desirable)

Your future career prospects look good

If you contribute your experience to us in the future, you will experience a surprisingly broad spectrum of national and international challenges, all of which are associated with safety, efficiency, and sustainability.

What can we offer?

• Standard hours Monday to Friday 40 hours per week. Overtime available.
• Excellent Health and life insurance, Group Income Protection, Pension, 25 days holiday.
• Permanent full-time position, office, client site, and home based hybrid working.
• Accredited training to internationally recognised engineering appointment.
• Company car on completion of training and appointment
• Career progression opportunities with structured development.
• Opportunities to work in many sectors of UK industry.

NB (please note that UK security clearance is very difficult to achieve within the timescales for non UK nationals, and you will subject to a screening process prior to interview to ensure that you meet the security clearance criteria)

PURPOSE

As an Electrical Design Engineer, you will play a key role in the design and delivery of client projects. You will be responsible for designing, developing, and validating electrical systems and control architectures to meet project requirements. This includes producing detailed electrical schematics and documentation, performing relevant calculations and component selection, and working closely with cross-functional teams to ensure successful implementation and commissioning.

THE COMPANY

We are one of the UKs leading integrators specialising in machining and additive applications. Our company specialises in advanced robotics systems and is at the forefront of using robotics to enhance manufacturing productivity both in the UK and internationally. By addressing production challenges and developing new processes, we deliver strategic solutions that, combined with our team’s expertise and passion for innovation, position us as market leaders.

Our company adheres to a comprehensive management framework that aligns with ISO14001 (Environmental Management), ISO9001 (Quality Management), and ISO45001 (Occupational Health and Safety Management) standards. This commitment ensures compliance, fosters continuous improvement, and promotes sustainable and safe practices across all operations.

All employees are expected to conduct themselves in a manner that supports the organization’s integrated management system in accordance with ISO14001, ISO9001 and ISO45001 ensuring compliance, continuous improvement, and a commitment to sustainable and safe practices.

ABOUT YOU

• You are meticulous and passionate about technology, someone who thrives in a dynamic and innovative environment.
• Your attention to detail and commitment to accuracy are unparalleled, ensuring that you work to the highest standards of quality and compliance.
• You are energetic, positive, self-motivated, creative and have a can-do attitude, with strong problem-solving ability and a solution-focused mindset.
• Ethical and Trustworthy

RESPONSIBILITIES

• Use SolidWorks Electrical to design electrical schematics, wiring diagrams, and control panel layouts, considering functionality, manufacturability, and project requirements.
• Design and validate machine safety-related control systems in accordance with BS EN 13849, including performance level (PL) determination, safety function development, and documentation of verification and validation activities
• Utilise simulation and modelling tools (e.g., PLC simulation software) to conduct feasibility studies and validate electrical/control system designs.
• Perform electrical calculations for current, voltage drop, cable sizing, load balancing, and protection to ensure safe, reliable systems.
• Work with the team to define client requirements, estimate materials, components, and project timelines.
• Own and track Project Plan milestones to ensure Electrical Design elements meet deadlines.
• Source electrical components (motors, drives, sensors, switchgear, PLCs) in line with company standards, project plans, and regulatory requirements.
• Identify electrical hazards and design systems to ensure operator safety, including generating compliance calculations and adhering to electrical safety standards.
• Participate in Machine Risk Assessments and ensure projects comply with safety regulations (e.g., BS EN 60204-1, CE, IEC standards).
• Engage in build and integration activities, including wiring, panel assembly, prototyping, and product testing.
• Perform installation and commissioning of electrical systems to meet quality and safety standards in workshops and on client sites as needed.
• Provide input for trials, factory acceptance tests (FAT), site acceptance tests (SAT), and operations & maintenance (O&M) manuals.
• Ensure all duties comply with CNCR policies, industry best practices, regulations, and relevant ISO standards (e.g., ISO9001, ISO14001).
• Contribute as part of a multi-disciplined team for Hazard Identification, Risk Assessments, RAMS, and electrical safety compliance.
• Support the creation and maintenance of system documentation, including O&M manuals, wiring diagrams, control flow diagrams, and schematics.

EDUCATIONEssential

• Bachelors degree (BEng or BSc) in Electrical Engineering, Mechatronics, Aerospace Engineering, or a closely related engineering discipline.
• Equivalent combination of practical experience and time-served training may be considered in lieu of a formal degree.
• Understanding of electrical standards, schematics, and control systems.

Desirable

• Certified Functional Safety Engineer (ISO 13849 / IEC 62061)

EXPERIENCEEssential

• Previous experience in an electrical design engineering role, ideally in machinery, automation, or robotics.
• Strong understanding of electrical and electromechanical systems used in industrial machinery.
• Experience developing concepts and designing complex electro-mechanical machinery, including robotics and automation systems.
• Proficient in SolidWorks Electrical for schematic design, wiring diagrams, and control panel layouts
• Experience programming Safety Controllers or PLCs, to required performance levels.
• Experience producing manufacturing and assembly drawings in line with relevant standards (e.g., IEC 61082).
• Knowledge of electrical control systems, PLCs, drives, motors, and sensors used in automation.
• Familiarity with pneumatic and hydraulic circuit diagrams (Desirable).
• Understanding of all relevant standards for compliance, including Machinery Directive, CE Marking, and electrical safety regulations (e.g., BS EN 60204-1).

Desirable

• SOLIDWORKS Electrical Schematic and SOLIDWORKS Electrical 3D
• SOLIDWORKS Electrical Routing training
• SOLIDWORKS EDS1 (Electrical Design System Setup)
• DBS Certificate
• Safe Contractor

SKILLSEssential

• Strong interpersonal and team skills to build positive relationships with colleagues, clients, and external stakeholders.
• Ability to work effectively with customers, peers, and senior-level leaders, providing technical guidance and support.
• Structured approach to problem-solving, both independently and collaboratively within a team.
• Excellent organisational skills to manage multiple tasks, projects, and deadlines efficiently.
• Strong analytical and problem-solving skills to arrive at reliable, well-reasoned conclusions.
• Clear and effective communication skills, both verbal and written, to convey technical and non-technical information.
• Proficient in Microsoft Office suite (Excel, Word, PowerPoint) for reporting, documentation, and presentations.
• Competent and safe to drive company or personal vehicles to perform site visits or off-site duties.
• Excellent time management skills, prioritising tasks effectively to meet project deadlines.
• Adaptable and flexible, with the ability to respond to changing circumstances or project requirements.
• Strong decision-making, creative thinking, and problem resolution skills.
• High level of attention to detail in design, documentation, and testing activities.
• Ability to multi-task and manage shifting priorities without compromising quality.
• Capable of working productively under pressure in a fast-paced engineering environment.

BACKGROUND CRITERIA

• Successful applicants will undergo a background check and are required to provide references.
• Must have a full driving licence.
• Valid Passport.

Locations:Redhill Birmingham Glasgow Chester Leeds
Shape the Future of Water Engineering with Binnies UK,Part of the RSK Group

AtBinnies UK, were not just delivering projects,were creating solutions that matter. Our teams design and manageCritical Human Infrastructureacross the water and wastewater sectors in the UK and internationally. Join us and work on challenging, meaningful projects in a collaborative environment where your ideas make a real difference.

Why Youll Love Working Here

We offer more than a job we offer a career with purpose, flexibility, and rewards:

• Private Health Insurance & Income Protection
• Life Assurancefor peace of mind
• Annual Leave Purchase Schemefor extra time off
• Clear career pathswith professional development support
• Annual pay rise & bonus
• High Street discounts & gym membership deals
• Cycle to Work & EV Salary Sacrifice Schemes
• Mental Health Supportbecause your wellbeing matters

What Youll Do

• Deliver innovative EICA design solutions for clean water and wastewater projects,from concept to detailed design
• Produce high-quality engineering outputs including single-line diagrams, cable block diagrams, control system architecture, MCC datasheets, and load schedules
• Act as a technical specialist, providing expertise and guidance
• Coordinate multidisciplinary designs and manage interfaces across teams
• Collaborate with project managers, engineers, JV partners, and clients
• Review bids, subcontractor designs, and provide technical support on-site
• Mentor junior engineers and support their professional growth
• Define and manage budgets, schedules, and quality standards

What Were Looking For

• Degree-qualified in Electrical Engineering (or similar)
• Strong background in water or related industries
• Expertise in electrical power systems, water treatment control systems, and integrated system design
• Knowledge of CDM, procurement, and document control
• Excellent communication and leadership skills
• Self-motivated, adaptable, and driven to deliver efficient solutions

Desirable:

• Professional Qualification (IEng / CEng MIET)
• Proven leadership and mentoring experience
• Commitment to continuous improvement and career progression

Ready to make an impact?
Join us and help shape sustainable water solutions for generations to come.

Come to a place where job satisfaction is as important as productivity."

With hybrid and agile working standard for all employees a relaxed atmosphere exists based on maturity.

Withstate of the art offices to work from and very diverse projects to work its easy to see why staff turnover is so low.

Engineers feel energised by the work and rewards but don’t miss out on their work/life balance.

What will you be doing:

Electrical design for building services solutions

Writing specifications, producing drawings and liaising closely with the Cad/REVIT teams.

You’ll also get the chance to work on performance specifications,surveys, reports and act as a clients representative.

What you’ll need:

• Demonstrable experience within a similar or relevant working environment atintermediate grade or above.
• Competency with the market leading software required to produce and validate design outputs.
• A genuine interest and enthusiasm forthe built environment.

The company

A well known name in the industry, our client has been involved with numerous landmark schemes inManchester and Liverpool city centres. A very well run company with excellent core values and beliefs.

Projects

Very varied including low carbon consultancy schemes, education, emergency services, residential and civic buildings.

We are looking for aMultiskilled Electrical Maintenance Engineer to work on a permanent basis in St Helens.

The role is working for a global manufacturing company.

The shifts for theMultiskilled Electrical Maintenance Engineer are Monday to Friday; 6am - 2pm and 2pm - 10pm (No nights).

Salary is c£40-50,000 per annum (depending on experience) plus 25 days’ holidays, company bonus, healthcare, pension etc.

Duties for theMultiskilled Electrical Maintenance Engineer:

Key Responsibilities

• Perform planned preventative maintenance (PPM) and reactive maintenance on electrical and mechanical production equipment.
• Diagnose electrical faults on machinery including motors, sensors, control panels, PLCs, drives, and automation systems.
• Carry out mechanical repairs and adjustments as required, including work on pneumatics, hydraulics, conveyors, and general plant equipment.
• Respond promptly to equipment breakdowns to minimise operational disruption.
• Assist in the installation, commissioning, and modification of machinery and production lines.
• Ensure all maintenance tasks are performed safely and in compliance with company procedures and industry regulations.
• Maintain accurate maintenance logs, documentation, and equipment records.
• Identify opportunities for continuous improvement and contribute to reliability and efficiency projects.
• Support cross-functional teams including production, quality, and engineering.
• Participate in shift patterns, on-call rota, or overtime as required.

Skills & Experience

• Time-served apprenticeship or recognised qualification in Electrical Engineering (NVQ Level 3, HNC/HND, or equivalent).
• Strong electrical fault-finding skills within a manufacturing or industrial environment.
• Good mechanical aptitude and experience working on mechanical systems.
• Familiarity with PLC systems (Siemens, Allen-Bradley, etc.) is desirable.
• Experience working with AC/DC motors, variable speed drives, sensors, and automated machinery.
• Ability to read and interpret electrical and mechanical drawings.
• Strong problem-solving skills and a proactive approach.
• Good communication skills and ability to work independently or as part of a team.
• Knowledge of health & safety legislation, safe isolation procedures, and permit-to-work systems.

How to Apply for the Multi Skilled Electrical Maintenance Engineer:

Please call Rebecca at Simply Recruitment Group or press APPLY NOW!

Maintenance Engineer

Salary: £51,000 (OTE £60,000+)

Location: Deeside

BRAND NEW opportunity to work for a Market Leading Company during their busiest period! This is the chance for a Maintenance Engineer to take their career to the next level. This company invests heavily in their factories and future and therefore need to recruit extra Maintenance Engineers to cope with the increased production. This role requires someone who one wants to be part of a growing multi-national business and develop their skills further.

Skills required for the Maintenance Engineer:

• Multi-Skilled with ideally an Electrical Bias
• Engineering Qualification
• Manufacturing Experience Ideal
• Different Engineering Backgrounds Welcome
• Happy to work in Heavy Environment

The Maintenance Engineer will benefit from:

• Working for a growing business that invests in engineers
• Excellent Training and development programs
• Investment in engineer
• State of the art machinery
• Favourable Shift Pattern
• Plenty of Overtime and Bonuses
• Market Leading Benefits Package

Benefits: Extremely High Pension Scheme, Excellent Health Care Benefits, Dental, Eye Care, Huge Bonuses, Free Parking

If you are interested in this role and feel that you have the right skills then please click apply at the bottom of this advert. For further details contact Antony Edwards at Pioneer Selection

As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details

Day Engineer / TIG Welder
£44,000 + regular overtime payments
Permanent
FMCG / Food Manufacturing
Based near Chester

We’re supporting a leading food manufacturer in hiring a skilled TIG Welder / Multi-Skilled Engineer to join their days-based engineering team.

The role will be 50% TIG welding and 50% maintenance work - site utilities, process and packaging machinery.

If you’re confident with TIG welding, reactive & preventative maintenance, and enjoy working in a fast-paced, high-standards environment - this could be a great next move.

The Role

TIG welding & stainless-steel fabrication
Maintenance on process & packing equipment
Support installs, upgrades & CI projects
Keep site utilities running smoothly
Strong focus on hygiene, safety & GMP

What You’ll Bring

Proven TIG welding experience (food/manufacturing vessels ideally)
Engineering qualification (electrical preferred)
Fault-finding skills & solid engineering mindset
Team player with a clean, methodical approach

Why Apply?

Competitive salary + overtime
Modern kit, supportive team
Real autonomy & development

Interested? Please get in touch to discuss confidentially.

Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.*

Job title: EC&I Work Pack Engineer

Location: Warrington - Onsite

Job type: Permanent

Our Client an Engineering company are seeking an experienced Electrical Controls and Instrumentation - EC&I Work Pack Engineer for a permanent position in Warrington location. This role is placed within Oil & Gas, Construction, engineering or maintenance, or highly regulated industry.

Role

As an EC&I Electrical Controls and Instrumentation Work Pack Engineer you are to develop EC&I Installation Work Packs (IWPs) from information submitted by the client, in the form of Construction Work Packs (CWPs). The IWPs will be used to guide the work force activities on site and will also be used to measure progress.

This position offers the opportunity to contribute to the successful delivery of large-scale LAES project, ensuring the efficiency and safety of mechanical work activities.

Responsibilities:

As a work Pack Engineer, you will develop EC&I work packs ensuring they meet technical, safety, and regulatory requirements. Ensure that work packs include all necessary drawings, specifications, procedures, and materials for execution.

Collaborate with project / construction managers, engineers, and other stakeholders to plan and schedule the EC&I work activities. Coordinate with the procurement / materials team to ensure that resources will be available in time for IWP execution.

You will coordinate with the procurement team to ensure that materials and resources are available for execution. Identify potential risks and issues, and proactively address them to avoid delays or safety concerns.

Experience

• Minimum of 5 years of experience in EC&I engineering, construction, or maintenance, with at least 2 years in a work-pack creation role
• HND/C in an EC&I discipline or related field experience / apprenticeship
• Good interpersonal skills required as part of a large project team
• Suitable IT skills - MS Office, Navis Works 2024
• Self-motivated to achieve client deadlines

What’s in it for you? If staff :

In return for your dedication and hard work, you will enjoy benefits such as 25 days annual leave plus Bank Holidays, Dental Plan Cover, 5% Employer Pension Contribution, Death in Service Cover, Private Medical Insurance, Cycle to work scheme, Access to benefit portal, and Access to Employee Assistance Programme.

If you feel you have the experience and qualifications to succeed in this role, then please apply using the link.

This vacancy is being advertised by Belcan.

Control Systems Engineer Cheshire/Near Runcorn System Integrator / Process Control Permanent £50,000 to £65,000

Fantastic opportunity for an experienced Control Systems Engineer to join a leading Cheshire based system integrator. This is a permanent role offering excellent career progression, exposure to diverse projects within process control and the chance to work alongside highly skilled Control Systems Engineers in a modern, collaborative environment.

Why apply for this Control Systems Engineer role:

• Join a growing system integrator with a strong reputation and a full order book.
• Work on varied control systems engineering projects across multiple sectors including utilities, process, manufacturing and nuclear.
• Work in a recently refurbished office space and a supportive team of professional Control Systems Engineers.
• The company has a strong people first culture, so expect regular reviews & personal development plans. This is an environment where team members can make a difference. They have internal communities set up where you can help drive change.
• Assistance available to help gain Chartered Engineer status.

Key responsibilities for the Control Systems Engineer:

• Design, configure and develop PLC and SCADA software from scratch.
• Deliver full project lifecycle from concept through to commissioning.
• Produce detailed specifications and design documentation.
• Test and commission systems safely in operational environments.
• Work on an approximate 85%/15% office-to-site split (regional sites, very occasional overnight staying away)

Requirements for the successful Control Systems Engineer:

• Strong experience in PLC programming and SCADA development.
• Proven ability to deliver projects from start to finish.
• Ideally degree-qualified with 5+ years relevant experience.
• Previous experience working for a system integrator is highly desirable.
• UK driving licence and eligibility to work in the UK without sponsorship.

Location & Commute:

The office location is commutable from most of Cheshire, including places such as Manchester, Liverpool, Runcorn, Warrington, Stockport, Widnes, Chester and Northwich.

If youre a Control Systems Engineer looking for a long-term career with a respected System Integrator, apply today!

Electrical Maintenance Engineer – Double Days

Salary: £45,000
Location: Commutable from Mold, Northop, Flintshire

A well-established, multi-site industrial manufacturing organisation is seeking an Electrical Maintenance Engineer to join the engineering team at a highly automated site in Flintshire. This role offers the opportunity to work with large-scale industrial machinery within a modern production environment.

The successful Electrical Maintenance Engineer will be responsible for electrical installation, fault-finding, and planned/reactive maintenance, while also having the opportunity to contribute to continuous improvement projects. The business offers a strong, personalised training and development programme to support long-term career progression.

Skills & Experience Required:

• Electrically biased Maintenance Engineer
• Proven experience with electrical fault-finding and installation
• Recognised Electrical Engineering qualification
• Previous experience in a maintenance engineering role
• Background in an industrial or manufacturing environment
• Experience with PPMs and breakdowns

Benefits:

• Double days shift pattern – no weekends
• Competitive salary of £45,000
• Opportunity to work for a market-leading manufacturing business
• Ongoing training and development
• Exposure to state-of-the-art, fully automated machinery

If you are an Electrical Maintenance Engineer looking for a stable role with strong development opportunities, apply today to be considered.

For further details, please contact Eyleesha Bhatti at Pioneer Selection.

As a registered candidate with Pioneer Selection Ltd, you will also be eligible for the referral scheme.
Earn £250 for every candidate successfully placed into permanent employment through your recommendation (terms and conditions apply – see website for full details).

£35,000 - £45,000 + Company Benefits + Specialist Training Company Car + Fuel Card + Overtime

Manchster - North West & North Wales

Are you an Electrical Field Service Engineer with wind turbine experience, looking for a hands-on, technically engaging role within the onshore wind sector offering regular overtime?

This UK-based renewable energy specialist provides nationwide operation, maintenance, and technical support for onshore wind turbines in the 200kW to 850kW range. Operating across England, Scotland, and Northern Ireland, the company delivers high-quality O&M, performance optimisation, technical upgrades, and asset support to maximise turbine availability and long-term value.

In this role, you will carry out planned and reactive electrical maintenance on onshore wind turbines across the North West of England and North Wales. You will be responsible for electrical servicing, inspection, and fault-finding on turbine systems, component replacement, report completion, and working safely at height while travelling regularly to remote sites. The role is Monday to Friday, 8:30am to 5:00pm, with significant overtime available to increase earnings.

This role would suit an electrically biased engineer with proven wind turbine experience who is looking for a varied, field-based position within a growing renewable energy business.

The Role:

• Planned and reactive electrical maintenance on onshore wind turbines
• Servicing, inspection, and electrical fault finding on turbine systems
• Repair and replacement of electrical components, including sensors, control systems, and switchgear
• Supporting mechanical and hydraulic works where required
• Monday-Friday 8:30-5 + overtime

The Person:

• Recognised electrical engineering qualification (NVQ, apprenticeship, HNC/HND)
• Proven experience working on wind turbines
• Comfortable working at height and in all weather conditions
• Full UK driving licence
• Willing to travel across the North West and North Wales region

Reference: BBBH23207

Keywords: Electrical, Engineer, Wind, Turbine, Technician, Renewable, Energy, Field Service, Maintenance, Fault, Finding, Hydraulics, Onshore, Wind, Working at Height, Preventive, Reactive, OEM, Standards, UK, Travel, Company, Van, Overtime, Manchester, Liverpool, Huddlesfield, Lake District, North Wales

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

Job title: Electrical Maintenance Engineer Reference:50986 Location: Halewood, Merseyside Duration: Permanent Start date:ASAP Salary: £46,587.88 Basic pay per annum (potential earnings up to £59,399.54 detailed below in shift pattern information). GPW Recruitment are partnering with Ford Halewood Transmissions Ltd (FHTL) in Halewood. Ford Halewood Transmission Limited (FHTL) develops and manufactures transmissions with an employee workforce of circa 600 people. The Plant has a proud 60-year history as a local employer and are dedicated to manufacturing high quality products. Ford are currently investing up to £230 million at the facility to transform it to build electric power units for future Ford all-electric passenger and commercial vehicles. Ford Halewood Transmissions Limited (FHTL) are seeking Electrical Maintenance Engineers to support the business. Electrical Maintenance Engineers play a pivotal role in ensuring production machinery, assembly lines and equipment are maintained and repaired as required to ensure the maximum operation uptime, working to all relevant FHTL procedures to ensure Safety, Quality, Delivery, Cost and Environmental objectives are met. Salary Details for an Electrical Maintenance Engineer within FHTL Basic annual salary £46,587.88 oBasic Annual Salaries within FHTL are all inclusive of 35% premium on all allocated holidays; 33 days holidays per year; 25 vacation & 8 bank holidays) Shift Pattern Information FHTL operates across various shift patterns which employees may be assigned to work which is aligned with production requirements on the assigned working area. Current shift patterns FHTL operate on are: day shift, 3-shift, 2-shift, 6DC & 7DC patterns. All shifts apart from day shift incur a shift premium on all hours worked. An example of potential earnings when working across a 3-shift pattern can be up to £59,399.54 per year. Please note that working specific shifts or achieving the maximum earning potential is not guaranteed. FHTL Employment Benefits Free on-site gym facility inclusive of a sauna & steam room (outside of working hours). Employee assistance programmes: weekly appointments available for all employees to utilise for free such as massages, circuit classes, nutrition advise, yoga, chiropody, reiki and head massages (outside of working hours). An on-site physiotherapy and occupational health department is available to employees to support their health and well-being. Competitive pension scheme (company pays 1.5 times the amount of the employee contributions paying up to 12%) £750 annual attendance bonus (subject to company T&Cs). Access Ford's Privilege scheme - allowing you to purchase Ford vehicles at a discount An excellent work-life balance, including a generous holiday allowance of 25 days (inclusive of set shutdown dates) Cycle to Work Scheme Qualifications and Experience required by the Electrical Maintenance Engineer Essential: Recognised Engineering Craft Apprenticeship and ONC (or equivalent) in Electrical Engineering Essential: PC Literate, Ability to work under pressure, part of a team, effective multitasker with a can do attitude. Experience Previous employment in an Electrical Maintenance Engineering role. Experience of preventive maintenance, fault-finding, diagnosis of faults on pneumatics, hydraulics, servo motors & drives, spindles, encoders, ABB & FANUCRobots, PLC and CNC machines and assembly lines ideally. Understanding of Profibus systems. Siemens S7 PLC (preferred but not essential as training can be provided), Solution line, Power Line, 840D and Automation Drive Experience. Excellent communication skills; Technical cross shift handover / line up. Experience of utilising Electrical technical manuals and drawings. Key Responsibilities (including but not limited to): Perform fault-finding and diagnosis on a range of Siemens PLC controlled equipment. Carry out planned preventative maintenance on a range of pneumatics, hydraulics, conveyors, CNC machines and robots in accordance with the manufacturers recommendations and industry standard practices. Be responsible for the recording of all work undertaken. Analysis and resolution of Electrical faults and repairs, driving for continuous improvements to machinery. Follow safety procedures and risk assessments. Work alongside other Maintenance Engineers to combine a great deal of initiative and enthusiasm with a sound understanding of electrical and mechanical issues. Work with Vendors, Production and Process Engineering teams to ensure optimum uptime and improvements to machines. Work Pattern Working days are Monday Friday (weekend work and overtime subject to business needs) Proposed start date: ASAP Based on personal availability if you accept the offer of employment. The Company is committed to diversity and equality of opportunity for all and is opposed to any form of less favourable treatment or harassment on the grounds of race, religion or belief, sex, marriage and civil partnership, pregnancy and maternity, age, sexual orientation, gender reassignment or disability. This vacancy is advertised in line with the FORD equal opportunities policy. To apply for the Electrical Maintenance Engineer role please click apply now and please ensure that you apply for this role via one agency only