PRINCIPLE ELECTRICAL ENGINEER

Join VVB: Where Quality and Excellence meet

Are you ready to be part of a team that delivers top-notch mechanical, electrical, and telecommunication engineering solutions? Look no further than VVB, where expertise and experience converge to create sustainable solutions across Rail, Highways, Power, and Tunnels.

At VVB, we’re more than just engineers - we’re collaborators, innovators, and stewards of our environment. Our projects are guided by our CORE values:

C-Care & Collaboration

O-Opportunity & Ownership

R-Responsibility & Respect

E-Excellence & End Result Focus

Join us in shaping the future of infrastructure while upholding these values at every turn. Explore more about who we are at www.vvb-eng.com

WHAT WE OFFER

• Competitive salaries with yearly appraisals
• expenses covered for assignments outside your base location
• Perkbox membership for 24/7 access to perks, benefits, discounts, and wellbeing tools
• Life Assurance and Private Medical Insurance schemes provided by leading providers
• Generous pension scheme
• 25 days holiday plus bank holidays (this includes a Christmas shutdown)

ROLE OVERVIEW: We are seeking a highly skilled and experienced Principle Electrical Engineer to join our dynamic team. To provide Electrical Engineering support and leadership to projects through design to completion. This will involve all stages from tendering, design, installation, testing, commissioning and handover. Management of Electrical installations throughout the projects to ensure successful delivery from a HSE, programme, quality, compliance and commercial perspective.

KEY RESPONSIBILITIES:

• Supervise design and engineering activities across multiple disciplines on projects, overseeing a team of engineers, design managers, lead engineers, specialists and BIM/CAD technicians.
• Proficient in low and high voltage electrical design (up to 33kV level) inline with all current standards. Key considerations should be safety, maintainability, ease of installation, design sustainability and environmental impact.
• Proficient in designing the following typical systems:
  • Lighting
  • CMS - sizing and layout
  • Earthing and bonding
  • UPS
  • Switchboards/LVAC
  • VSDs
  • Lightening protection (support from specialist supplier)
• Undertake electrical design modelling with electrical design programmes e.g. Prodesign-Amtech.
• Undertaking formal electrical design review verification (CAT2 checking) in line with current standards and to ensure buildability and constructability. Identify any weakness or errors in the design that could jeopardise the functionality. Ensure HSE best practices are always followed.
• Familiarity with PLC control systems, including SCADA and BMS.
• Familiarity with HAZID, HAZOP and HAZCON studies as required.
• Ensure designer risk registers are compliant with installation parameters.
• Provide engineered solutions to key project problems to satisfy clients expectations, project restrictions and budget considerations.
• Management of all associated design registers, meeting minutes, drawing registers etc.as appropriate inline VVB and project requirements. Ensure all formal communication is undertaken and managed (RFIs, TQs, EWNs, MARs etc.)
• Direct liaison with the CAD/BIM team to ensure correct drawing modelling, to BIM or other standards. Review drawings for clash detection and associated interface problems.
• Development of scope documents for tenders and procurement processes.
• Liaison with manufacturers to determine product suitability, in partnership with procurement.
• Attendance at FAT and SAT (and any other required stage) to ensure compliance with requirements.
• Direct liaison with installation teams to ensure design suitability, works methodology and solve key installation issues/constructability.
• Working with the commercial department to track design change and variances.
• Working with the planning department to plan design, installation and T&C works. Provision of accurate assessment on forecast works to complete and provide suitable readjustments to ensure project programme is maintained.
• Management of subcontractor works as appropriate including assisting commercial department in valuation and contract support.
• Ensure design and works comply with VVB and client quality management systems
• Keep up to date with all electrical, construction and relevant legislation, law, standards and best practice

LINE MANAGEMENT DUTIES:

• Management of the electrical engineering and design teams
• Review and management of the teams time and allocation
• Training and mentoring of the electrical engineering team
• Carry out annual performance reviews for the electrical engineers

PERSON SPECIFICATION:

• Technical Knowledge and Skills:

• Knowledge of relevant electrical installations legislation and standards, BIM and design modelling standards and all other associated standards and legislation.

• Knowledge of design processes and associated compliance

• Utilisation of Electrical design packages (Amtech/Trimble, Cymap etc)

• Design using AutoCAD / Microstation

• Sustainability awareness

• Advanced MS Office skills including Excel

• QUALIFICATIONS:

• HND in Electrical Engineering

• Engineering Council Registration as Chartered Engineer (CEng)

• Registered member of either CIBSE or IET or other recognised Engineering Council Institutions

• SMSTS

• CSCS Card AQP or PQP min

• Full UK drivers licence

VVB values the benefits of a diverse workforce and is committed to treating all prospective and current employees with dignity regardless of age, disability, gender reassignment, marriage and civil partnerships, pregnancy and maternity, race, religion or belief, sex or sexual orientation. All employees must demonstrate commitment and enthusiasm in promoting the principles of equality in employment and service delivery.

Does VVB sound like a company you would like to work for? Send us your CV on the VVB Careers Microsite - careers.vvb-eng.com/vacancies

NO EMPLOYMENT AGENCIES.

Your new company
You will be joining a well-established manufacturing business recognised for its strong reputation, stable working environment and continued investment in its people and equipment. The company operates modern production facilities and prides itself on maintaining high standards of safety, efficiency and product quality. With ongoing growth and a focus on continuous improvement, it offers a supportive environment where engineering plays a key role in site performance.

Your new role
As a Shift Engineer / Multiskilled Maintenance Engineer (Electrical Bias), you will work as part of the onsite engineering team to ensure equipment reliability and minimise downtime across a busy manufacturing operation. Working on a structured 8-week rotating shift pattern (average 42 hours per week), you will carry out planned maintenance, respond to equipment breakdowns and support ongoing improvements across the site.Key responsibilities include:

• Delivering both planned preventive maintenance (PPM) and reactive breakdown repairs
• Fault-finding on production machinery, electrical systems and automation equipment
• Working on motors, drives, conveyors, control panels and mechanical components
• Supporting engineering improvements, efficiency projects and reliability initiatives
• Ensuring all work is completed safely and in line with site standards
• Maintaining accurate engineering records and contributing to shift handovers
• Working collaboratively with production teams to enhance machine uptime

Shift pattern (12-hour shifts):8-week rota including days, nights and weekendsAverage: 42 hours per week

What you’ll need to succeed
To be successful in this role, you will need:

• A recognised engineering qualification or completed apprenticeship
• Strong electrical bias with additional mechanical capability
• Experience within a manufacturing or industrial maintenance environment
• Confident diagnostic and fault-finding ability on electrical systems
• Familiarity with PLC-controlled machinery, drives and automation equipment
• A proactive approach and the ability to work independently on shift
• Strong communication skills and a commitment to health & safety

What you’ll get in return
This role offers a competitive salary package, structured shift pattern and a range of employee benefits, including:

• £55,000+ salary
• Salary Sacrifice Pension Scheme:
  • Employee contribution: 5% minimum
  • Employer contribution: 5%
• 33 days annual leave (including bank holidays), plus additional Service Days at 4, 8 & 12 years
• Life insurance
• Onsite canteen facilities
• Free onsite parking
• Cycle to Work scheme
• Electric Vehicle salary sacrifice scheme
• A stable working environment with ongoing investment in engineering and site development

What you need to do now
If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV, or call us now.
If this job isn’t quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found at hays.co.uk

Electrical Project Engineer

Our client is a trusted electrical contracting business delivering low-voltage electrical installation, design, and build services across the UK water and renewable energy sectors.

They are now seeking an experienced Electrical Project Engineer/Supervisor to manage and supervise electrical works on projects within the Water Sector. The successful candidate will coordinate site activities, ensure compliance with technical standards, and deliver projects safely.

Electrical Project Engineer

What’s in it for you?

• Monday to Friday, 08:00-17:00 (may vary depending on project requirements)
• Full-time, office-based role, with occasional travel to sites (Around Yorkshire)
• Up to £70,000 per annum (DOE)
• Car allowance
• Private medical (cash back plan)
• Life insurance
• 22 days annual leave + bank holidays

Electrical Project Engineer

Key Responsibilities

• Supervise and manage electrical installation works on-site (LV systems)
• Coordinate with project managers, consultants, subcontractors, and vendors
• Review electrical drawings, specifications, and technical submittals
• Plan and monitor daily site activities and manpower
• Ensure compliance with electrical codes, standards, and project specifications
• Oversee testing, certification and handover of electrical systems
• Monitor project progress and report on schedules and costs
• Ensure strict adherence to HSE policies and site safety requirements
• Resolve technical and site-related issues efficiently
• Prepare progress reports, as-built drawings, and documentation
• Assist commercial teams with valuations, technical clarification, variations, and cost forecasting

Electrical Project Engineer

Role Requirements

• Proven track record as an Electrical Project Engineer or Non-Working Supervisor
• Extensive electrical installation experience within the Water Industry (essential)
• Familiarity with the delivery of NEC contracts preferable
• Ability to read and interpret electrical drawings and schematics
• Strong leadership, communication, and coordination skills
• Proficiency in AutoCAD and Trimble (Amtech) desirable
• 18th Edition (BS 7671) and 2391 (Initial & Periodic Inspection & Testing)
• Willingness to work on-site and meet project deadlines

Commercial Catering Engineer - West Yorkshire

Basic from £40,000 / Private use of van / Door to door pay / 31 days holiday / Overtime rates

We are currently looking to recruit an experienced Commercial Catering Engineer to work within our specialist commercial catering department. We have been established for over 50 years specialising within the Commercial Catering, Air Conditioning and Refrigeration industry. We work alongside a wide range of clients including: Restaurants, Pubs, Hotels, Schools, Retail, Colleges and Hospitals.

As a Commercial Catering Engineer, your key responsibilities will include service, maintenance, repair and fault finding of gas and electric kitchen equipment. This role is field based and will require you to be customer facing as well as meeting clients.

Previous Experience Required
COMCAT 1,3,5 (Essential)
Full Drivers License (Essential)
Relevant experience working on commercial catering equipment
Electrical experience (not required but an advantage)

Package Overview
Basic from £40,000pa (This is negotiable depending on experience)
40 hour working week
Paid door to door
23 Days holiday + 8 bank holidays
Ford Transit Van and fuel card
Personal use of van
Smart Phone
Uniform and tools
Discounts on sportswear (JD, Tessuti, Go Outdoors)
Company Pension
On Call 1 in 6 with £100 standby payment Time ½ Monday - Saturday
Double time on Sunday’s & Bank Holidays

Top up training provided and funded if required.

If this particular vacancy is of interest to you please call #Fern @ CV Bay on 0121 389 0023

#eng1

Role: Electrical Design Engineer

Location: Coventry (Lintott Control Systems)

Salary: Competitive + excellent benefits

Are you an experienced Electrical Design Engineer looking to develop innovative, cost‑effective control system solutions? Do you enjoy working across the full project lifecycle, from design through to commissioning? If so, this could be the perfect next step for you.

Galliford Try’s Lintott Control Systems team is expanding, and we’re looking for a proactive, technically strong Electrical Design Engineer to support the delivery of high-quality control solutions across our Environment division.

You’ll play a key role in delivering projects worth approx. £10m per year for major UK clients, helping us improve essential water and wastewater infrastructure nationwide.

What You’ll Be Doing

* Producing detailed electrical designs, schematics, panel layouts and BOMs for MCCs, LV distribution, switchgear and control panels.

* Ensuring all designs comply with BS EN 61439, BS EN 60204 and 18th Edition standards.

* Supporting the development of Functional Design Specifications (FDS) alongside software engineers.

* Carrying out FAT and SAT testing and attending sites for hardware commissioning.

* Working collaboratively with Sales, Engineering, Operations, and external customers.

* Identifying value‑engineering opportunities to enhance quality, performance and efficiency.

* Supporting internal process improvement and ensuring adherence to Lintott’s quality systems.

What We’re Looking For

* Solid experience in electrical hardware design (MCCs, control panels, LV distribution, switchgear).

* HNC/ONC in Electrical/Systems/Software engineering or relevant experience in electrical installation or maintenance role (within Utility, Food, FMCG, Automotive, Materials Handling, etc.).

* Experience using AutoCAD Electrical.

* Qualified to 18th Edition (BS 7671).

* Competence in working in a Systems Integration Environment, closely working with Software Engineers to develop Functional Design specifications (FDS).

* Experienced in producing Complex Electrical Schematics, General Arrangement Drawings and BOM.

* Specification, design, installation, and commissioning of equipment with internal and/or external resource

* Strong communication skills with confidence to work directly with clients.

* IT proficiency (Word, Excel, databases) and report writing skills.

* Experience in the water & wastewater is desirable

Why join us?

* Work on industry-leading projects with a £3.8bn order book.

* Competitive salary + benefits.

* Generous holiday entitlement + option to buy more.

* Pension plan, private medical options, and employee assistance programme.

* Professional membership paid annually.

* Career development through tailored training and leadership programmes.

* Agile working options for flexibility.

Galliford Try is committed to diversity, inclusion, and supporting your wellbeing.
If you’re passionate about delivering excellence and want to make an impact, apply today and help us build the infrastructure that shapes communities

The post holder will be responsible for working within multi-disciplined Engineering teams to deliver innovative design solutions for new concepts & customisation of existing products for our customers across the globe, ensuring delivery to cost, time, quality & adherence to strict aerospace regulations and suitability for manufacturing.

Responsibilities

• Liaising with 3rd party vendors in support of projects
• Supporting prototyping for new projects considering the implications of issues such as cost, safety and time constraints
• Creating relevant documentation, such as Test Plans and Reports for electrical testing of seats
• Supporting customer meetings as required
• Providing end to end support on an electrical basis throughout the lifecycle of projects
• Supporting the Engineering team to achieve key milestone dates and work with internal stakeholders to assist with production investigating, troubleshooting, and resolution of build and test issues
• Supporting change management through research, concepts, design reviews, trade studies, impact analysis and implementation

Reward

• Competitive salary
• Annual bonus (linked to company performance)
• 33 days annual leave (Increase after 5 years’ service)
• 37.5 hours per week
• Flexi time working
• £5,000 employee referral bonus
• Health cash plan
• Contributory Salary Sacrifice Pension Scheme
• Holiday Purchase Scheme - Salary Sacrifice
• Electric Car Scheme - Salary Sacrifice
• Cycle to Work Scheme
• Life Assurance Scheme at x4 gross salary
• Competitive enhanced Maternity and Paternity pay
• IVF & Assisted Conception Policy
• Women in Business - Corportate Member
• Wellbeing Initiatives
• Employee Recognition scheme
• Long Service Awards
• Local charity / sponsorship activities
• Dedicated employee parking
• Discounted Gym membership
• Learning and development opportunities
• Career progression

Requirements

Essential

• Hold a relevant Degree/Apprenticeship (or equivalent) in Electrical or Mechanical engineering or a minimum of 2 years working in an engineering environment
• Previous experience with one of the design software packages such as AutoCad, Pro E, Solidworks, Catia etc
• Proficient with MS Office (MS Word, Excel, Power Point, Access)
• Excellent communication and interpersonal skills to interface with Customers, manufacturing, suppliers and production
• Results driven with a can-do attitude to ensure solutions
• Ability to build and maintain relationships with internal and external customers

Desirable

• Experience of Electrical Design within a design and manufacturing environment
• Previous 3D Harness routing or Pipe routing experience
• Previous experience writing test plans/reports

We reserve the right to enhance criteria on shortlisting.

Thompson Aero Seating is an Equal Opportunities employer.

To be considered for this role you will be redirected to and must complete the application process on our careers page. To start the process, click the Apply button below to Login/Register.

Your new company
Maintenance Engineer job in Dungannon. Working Monday to Friday in production maintenance. Your new company is a mufti site across Northern Ireland and you have the advantage of working for a huge group which brings benefits such as higher hourly rates and 34 days annual leave plus good personal care benefits. That’s the difference between working for a large people focused group. I can demonstrate continual investment when you call to enquire or apply.
Your new role
Supporting 4 others in the team with production-based maintenance. The spirit amongst the team is very good, and the manager is still hands on to support in the plant. There is a good attitude towards supporting one another. The plant runs 24/7 so scheduled down time allows for PM’s in this busy plant. Repairs, planning, showing contractors around are all part of your role
What you’ll need to succeed
Relatable maintenance experience that can transfer or come from a production based environment. You don’t necessarily need to be time served but it was be helpful but if you can demonstrate mechanical and light electrical maintenance experience then they are interested in pitching you this opportunity. Available to work the 3 shift rotation pattern which is 6am to 2pm, 2pm to 10pm and 10pm to 6am starting Sunday night.
What you’ll get in return
Salary before overtime of £46800 which is an average hourly rate of £22.50 per hour. 34 days annual leave, overtime time and a half and double time, 6% from your company into your pension.
What you need to do now

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV, or call us now.
If this job isn’t quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be

Skills:
maintenance mechanical electrical

Benefits:
46800

Maintenance Technician/Shift Engineer

Competitive Salary (Experience Dependant)

Belfast

Our client is seeking to recruit a Maintenance Technician/Shift Engineer to join them at their facility in Belfast paying a Competitive rate:

• Life Insurance
• Parking
• Rolling Shifts
• Pension

What you will be doing is;

• Completion of all routine maintenance, in line with the agreed site plan
• Repair and maintenance of the plant and its equipment, to ensure faults are identified quickly and production downtime is minimised
• Accurate recording of all work undertaken for compliance and audit purposes.
• Ensuring all duties are undertaken in line with current health & safety legislation.

If you have experience working as an experienced multi-skilled engineer with proven track record within a fast-paced production environment, send me over your CV and I will be in touch.

Skills:
Mechanical Maintenance Mechanical Maintenance Engineering Multi-Skilled Engineering Preventive Maintenance Maintenance work

Benefits:
Pension Fund Parking Paid Holidays

Company Description

Pure Engineering Group is a full-service mechanical engineering company, established in 2001 by the Mallon brothers as a family-owned business. The company consists of three divisions: Pure Vent, Pure Fabrication, and Pure Mechanical, offering a range of mechanical engineering (HVAC) installations for commercial offices, schools, hospitals, hotels etc including after sales maintenance services. Pure Engineering Group has made significant investments in new premises and is focused on future growth opportunities.

Key Responsibilities:Install, service, and maintain commercial and industrial air conditioning systemsDiagnose faults and carry out repairs efficientlyPerform planned preventative maintenance (PPM) to ensure system longevityWork with a range of systems, including split, VRV/VRF, and packaged unitsEnsure all work complies with health & safety regulations and F-Gas legislationProvide excellent customer service and professional advice to clientsComplete job reports and paperwork accurately and in a timely mannerSkills & Experience Required:Minimum 2 years experience in air conditioning installation and/or servicingF-Gas Category 1 Certification (essential)NVQ Level 2 or 3 in Refrigeration & Air Conditioning (preferred)Strong fault-finding and problem-solving skillsAbility to work independently and as part of a teamFull UK driving license (essential)

Skills:
Commissioning Expert Air Conditioning

Benefits:
Company Vehicle fuel card company phone Pension Fund Uniform

NIE Networks is offering an exciting opportunity to join our Network Development team as a Network Innovation Engineer. This role will provide significant scope for professional development and the chance to contribute to a critical area of our growing business.

As a Networks Innovation Engineer, you will play a key role in delivering a diverse portfolio of innovation and Distribution System Operator (DSO) projects ranging from small-scale proof-of-concept trials to large-scale demonstrators. You will drive the development and integration of new technologies, systems, and processes into Business as Usual operations. The successful candidate will report directly to the Networks Innovation Manager.

CV and cover letters must be received no later than 11pm on Sunday 15th March 2026.

Please refer to the Role Specification document which is available for download for further details on the role, application and criteria.

Skills:
Electrical Engineering Power Engineering Principles Project Management PRINCE2 Microsoft Office

Benefits:
Parking Paid Holidays Mobile Phone Medical Aid / Health Care Laptop Gym Pension Fund

COMPEX Engineer - Day Shift Role (Mon to Fri) Job Description To ensure that all equipment within NovoGen's control is correctly maintained and repaired, maximising plant efficiency and the safety of all personnel at all times. To maintain and improve standards of Health and Safety, Quality and housekeeping and to report any short comings promptly. To maintain production equipment in Zoned Areas across various client sites. To carry out, within competency levels, management of maintenance activities, fault finding, repair, decommissioning and re-commissioning. To maintain a flexible approach and focus on the needs of the client. To provide reactive out of hours support on a call-out rota basis. Main Tasks To safely operate and maintain plant items under NovoGens control, ensuring 100% service delivery is supplied to the client under contract KPIs. Follow all Health & Safety and Environmental requirements that are defined on work instructions or communicated in training. Respond accordingly during emergency situations and follow documented procedures. Report all accidents, occupational illnesses and emergencies. Host specialist sub-contractors, and ensure they conform to site requirements. Formulate and review risk assessments and method statements. Carry out planned preventative maintenance, routine servicing and inspection and commissioning of electrical and mechanical plant and instrumentation within the portfolio. Ensure that site PPM schedules are fulfilled and that service records/reports are issued on time. Respond to the requests of the FM Helpdesk by carrying out tasks associated with breakdowns. Provide effective feedback to the client to ensure awareness of equipment issues. Provide absence and holiday cover within the wider team as required. To take responsibility for defects and follow up on any repairs. Identify and take ownership of specific improvement projects. Act as a point of contact for call-outs. Qualifications Trade qualification in a electrical discipline COMPEX EX01-EX04 qualification Full Driving License Essential Experience Knowledge of Health & Safety statutory legislation and requirements Computer literacy with an aptitude to become proficient with CAFM and various in-house software suites Essential Skills Demonstrate an innovative, positive and open approach to problem solving Work well with others, helping to generate a positive team atmosphere Build effective working relationships Take ownership of personal development Take responsibility for their own Health & Safety, comply with all relevant regulations To be self-motivated and proactive Benefits A competitive starting salary will be offered for the role of £40,000 to £45,000. Provision of company van and tools to effectively complete required tasks. Enrolment in company pension scheme (employer contributions of 8% + employee at 6%) Enrolment in company private medical scheme after 12 months service. Enrolment in company death in service scheme after 24 months service. How to Apply Interested applicants should submit their CV by clicking in the apply button below.

Salary:£18.00 - £21.00 per hour

Location: Comber

Contract: Full Time, Permanent

Dig in and grow with us

At Mash Direct, our aim is simple: to bring the taste of great food, rooted in six generations of farming, to every table, nurturing a stronger connection between people, their food, and the land it comes from.

Were here to be a trusted source of freshly prepared vegetable side dishes, honouring our heritage while growing responsibly for future generations. How we do that matters. We work collaboratively, act with purpose, support one another, and take ownership of the results we deliver.

We also believe in looking after our people. Were building a culture where everyones voice is heard, good leadership is developed, and learning and growth are part of everyday work. Supporting each other and sharing knowledge is just as important as producing great food.

If you care about good food, honest work, and being part of a supportive team that does things properly, Mash Direct is a place where youll belong.

What youll be doing

It will be your responsibility to ensure the safe and reliable operation of our production equipment through effective multi-skilled maintenance support. This role will focus on rapid response to breakdowns, accurate fault-finding, and completion of planned maintenance to minimise downtime.

Beyond the tools and troubleshooting, this role is about taking pride in keeping the line running smoothly so our food is ready for its place on every table.

Your role will include:

• Liaising with production managers and shift supervisors to determine day to day maintenance and production priorities
• Carrying out planned preventative maintenance across plant equipment, keeping up-to-date maintenance records of all daily activities
• Playing key role in developing, implementation of a continuous improvement program & culture
• Perform daily in-depth fault finding, Root Cause Analyses, diagnosis and breakdown repairs
• Comply with Company and Government legislation regarding Health & Safety and ensure H&S standards are maintained to highest standards
• Diagnose and repair faults on plant control systems. Investigate the nature of plant failures and subsequently carry out repairs as quickly and efficiently as possible to avoid loss of plant production.
• Install, modify and commission new plant equipment to high standards.
• Ensure, as part of the engineering team, that a safe, clean and tidy working environment is maintained
• Provide specialist technical advice where appropriate
• Good communication and interpersonal skills with the ability to co-operate and deal tactfully and diplomatically with a variety of people, both internal and external

Working hours

Youll work five days across Monday to Saturday, as part of a 45-hour working week.

What we offer:

• Secure, permanent employment
• Supportive working environment
• Training & Development
• Free on-site parking
• Staff discounts on all Mash Direct products
• Cycle to Work scheme

Youll be joining a culturally diverse workforce where people look out for each other and take real pride in what they produce.

What were looking for

We are looking for someone who has:

• Relevant City & Guilds, BTEC or NVQ qualification
• Experience in FMCG environments preferably food
• Skilled experience fault finding and repair
• Reliable with good time management
• Have creative thinking skills and techniques to engineering/maintenance issues
• Excellent communicator, strong analytical, oral/written communication

If you want to be part of a business that values hard work, teamwork and doing things the right way, wed love to hear from you.

Mash Direct is an Equal Opportunities Employer and welcomes applications from all suitably qualified candidates.

Full job description

We’re looking a passionate and forward-thinking Electrical Design Engineer to join our growing team. You’ll design, test and validate functional and robust electrical systems driving a sustainable future for GSE.

If you’re ready to take your engineering career to new heights and make a real impact, we want to hear from you.

Main Duties and Responsibilities:

• Design and develop electrical circuit schematics, harnesses and panel layouts to applicable internal and industry standards and legislative requirements.
• Create technical documentation including design specifications, work instructions, parts list, list of critical parts and maintenance components.
• Conduct simulations and other engineering analyses to guide and verify designs and specify the electrical and electronic components for use in the vehicle system.
• Liaise with cross department teams to fully realise design boundaries to helping to identify technical solutions to realise design and achieve “right first time” approach.
• Develop electrical solutions by studying customer requirements, researching and testing components and determining overall system integration.
• Communicate requirements and work with PLC Software Engineers to develop controls strategies for powertrain and driveline components and systems.
• Working on projects to expand the current product range and bring new products to the market.
• Assures product quality by designing electrical testing methods; testing finished products and system capabilities.
• Understanding of safety critical systems and the application to electrical and electronics systems design
• Provide Engineering support and technical answers in accordance with internal standards.
• Maintains product and company reputation by complying with regulations.
• Any other duties as required by the Line Manager to suit business needs.
• Adherence to our ISO 9001 Quality management system.
• Adherence to company health and safety procedures.

In return we offer:

• Competitive rates and overtime

• Health Cash Plan

• Pension

• Life Assurance

• Discounted High Street, Gym Membership and Insurance

• Long Service Awards

• Social Events

• Cycle to Work Scheme

• Technology Scheme

• On-site Parking

• Early finish on Fridays!

Join Mallaghan Engineering as an Electrical Designer and be part of shaping the future of aviation support solutions. Apply now to start your journey with us keeping the world moving !

Other Info

Job Types:
Permanent

Schedule:

Work authorisation:
United Kingdom

To Apply Please forward your CV via the APPLY Now button below.

Our Client in County Antrim have a requirement for a Senior R&D Engineer to join their team on a permanent basis. Call Dominic Heron for more details

Job Title: Senior Electronics R&D Engineer

We are delighted to collaborate with our client who are a local manufacturer and leading provider in their industry, in the search for a seasoned Senior R&D Engineer. This pivotal role centres on fostering innovation and steering R&D projects to fruition. If you enjoy solving high-speed, high-reliability problems and want your work to end up in labs, observatories, field deployments and next-generation platforms, you’ll feel right at home here.

Top 3 Things to Know About this Job:

Competitive Salary Range: £45,000 - £65,000 plus Company Bonus

Industry Pioneer: Work with a leading provider committed to innovation and quality

Location: Scenic County Antrim

The Role:

* Coordinate and manage R&D projects, ensuring timely delivery and adherence to set standards and specifications.

* Engage in product development, from conceptualisation to implementation, fostering innovative solutions.

* Ensure products are developed to comply with industry regulations and standards.

* Liaise with internal and external stakeholders, aligning R&D projects with company strategy and client needs.

* Develop, validate, and implement testing protocols.

The Person:

* Holds a solid track record in a Senior R&D position within manufacturing or a similar industry.

* STEM background, applicants from Mechanics/Electronics/Physics are warmly welcomed.

* Exemplary project management skills, able to lead projects from initiation to completion.

* Strong analytical skills, with an eye for detail and problem-solving.

* Innovative thinker with the ability to translate ideas into pragmatic solutions.

What we’re looking for (must-have):

• Strong track record delivering complex PCB designs into real products
• Excellent schematic capture + PCB design experience
• Confidence with lab bring-up and debug: oscilloscopes, logic analysers and
  troubleshooting
• Solid understanding of high-speed layout fundamentals (return paths,
  impedance control, decoupling, clocks)
• Experience designing robust power systems for sensitive electronics (noise,
  sequencing, protections)
• Comfortable working across teams deriving product requirements from
  commercial specifications

Nice to have (but not required):

• Background in imaging/camera systems (VIS, SWIR/low-light, sensor bring-up,
  image pipeline awareness)
• Broad experience in FPGA, embedded software and basic test GUI development
• Knowledge of industry standards and compliance (EMC/ESD, CE/UKCA, environmental testing where applicable)
• Experience with production test development, boundary scan/JTAG strategies, or automated test rigs
• Exposure to harsh-environment design (vibration/thermal cycling, sealing considerations, rugged connectors

The Rewards:

* Salary: £45,000 - £65,000 with additional Company Bonus

* Opportunity to work in a dynamic R&D team, driving innovative projects.

* Gain experience in a leading manufacturing company, a prime player in the industry.

* Company Stock Options

Next Steps:

For further information, and to ascertain your suitability for this Senior R&D Engineer position, please reach out confidentially to Dominic Heron.

Expert, confidential recruitment advice.

The listed salary is negotiable, based on your cumulative experience and expertise. We may adjust our shortlisting criteria based on the volume and calibre of applications.

Skills:
senior electronics engineer electronics engineer senior hardware engineer hardware engineer Senior Embedded Engineer

Benefits:
Bonus Stock Options Pension Free Parking

We are looking for an experienced Electrical Design Engineer to join our Control Panel Design team. In this role, you will be responsible for designing and developing electrical, instrumentation, and control systems for water and wastewater treatment projects. You will work closely with multidisciplinary teams to ensure designs meet technical, safety, and regulatory standards.

This is a fantastic opportunity for a technically skilled engineer who enjoys problem-solving and delivering innovative solutions. You will be involved in every stage of the design processfrom concept development to commissioning supportwhile staying up to date with the latest technologies and best practices in automation and control systems.

The successful candidate will work 40 hours a week.

Profitec Solutions

Profitec Solutions is part of Browne Group, a leading contractor in the UK water and civil engineering sectors. We play a key role in delivering the smart systems that power and protect the UKs water and utilities infrastructure.

Operating from our dedicated factory in Cookstown, Northern Ireland, we design and build intelligent control and automation systems that help treatment sites operate safely, efficiently and with real-time visibility. Our in-house team delivers everything from high-quality MCC panel manufacturing to full process automation, SCADA integration and off-site electrical builds, supporting projects across the UK.

Our factory-built systems reduce time on site, improve safety and ensure consistent quality. With a strong track record across the UK and Ireland, were trusted by major water authorities to deliver reliable, future-ready control systems.

We offer opportunities for people with a wide range of skills and backgrounds, from hands-on engineering to digital systems and project support. At Profitec, youll be part of a collaborative team that values innovation, precision and continuous improvement.

What Were Looking For

• Strong technical skills in electrical, instrumentation, and control system design.
• Excellent problem-solving abilities and attention to detail.
• Effective communication and teamwork skills.
• Highly organised with ability to manage multiple tasks and deadlines.
• Adaptable and eager to learn new technologies.
• Essential Qualifications, knowledge and experience:
• Bachelors degree in electrical engineering, control systems engineering, or related discipline. Someone with previous control panel design experience without any formal qualifications will also be considered.
• Experience in EICA design engineering (water/wastewater preferred).
• Knowledge of PLCs, SCADA systems, and instrumentation.
• Familiarity with electrical safety standards and regulatory requirements.
• Previous experience with Eplan design software will be advantageous

If youre interested in helping us deliver cutting-edge solutions for water treatment projects, apply today and bring your expertise to Profitec.

Skills:
communication control system design EICA design engineering

Electrical Engineer - Our Manufacturing Client not far from Belfast require Electrical Design Engineer/s to join the R&D Team (salaries to 47-52K & Bonus).You’ll have flexitime, generous holidays and an extensive benefits package. As an Electrical Design Engineer you will carry out 2D/ 3D schematics delivering innovative solutions. Strong Graduate Engineers with industry experience considered.

The Role(Electrical Engineer)

• Utilise latest technologies within a team of elite designers.
• Design electrical hardware - Control Systems and Wiring
• Identify system problems and implement solutions
• Liaise with Global Customers

The Person( Electrical Engineer)

• Possess electrical degree or strong hands-on electrical experience to replace
• Strong 2D/3D electrical design experience
• Ability to build relationships internally and world-wide
• Experience within a manufacturing or industrial design environment

In return our Client will provide you with a career for life within an exciting R&D environment.

Interested? Please send us your CV now via the link provided. For further information please call Cranmore Recruitment in confidence now.

Electrical Engineer

CPL have partnered with Northern Ireland Civil Service (NICS) to recruit for an Electrical Engineer (PPTO Grade 7) to join their team on a temporary contract, with possibility of extension.

\Pay Rate - £32.05 per/hr

\Location DoF, CPD Property Services - Clare House

\Benefits 37 days holiday per annum

\Hours 37 hours per week

The successful candidate will report to a Deputy Director (G6) in the provision of various aspects of Planned preventative maintenance and remedials works to Government Departments, Agencies and the wider public sector.

The key duties of a Principal Professional and Technical Officer (PPTO) Electrical Engineer (Multi-Disciplinary Team Lead) includes:

*Leading and managing for all staff and business activities within the multidisciplinary team, with responsibility for making key decisions on team workload, staff resources and the delegation of works.

*Leading and managing the provision of advice pertaining to the services delivered by the multidisciplinary team to Northern Ireland Departments, their Agencies and Non-Departmental Public Bodies.

*Leading and managing the provision of advice pertaining to the services delivered by the multidisciplinary team to Northern Ireland Departments, their Agencies and Non-Departmental Public Bodies.

*Leading and managing the provision of advice pertaining to the services delivered by the multidisciplinary team to Northern Ireland Departments, their Agencies and Non-Departmental Public Bodies.

*Leading and managing the procurement and management of external maintenance contractors and consultants.

*Leading and managing the monitoring and reporting on contract Key Performance Indicators.

*Acting as the lead PSD officer in relation to matters pertaining to electrical engineering

*Acting as the lead PSD officer in relation to matters pertaining to electrical engineering

*Responsibility for carrying out Post-Project Reviews on a representative sample of completed Works Projects and accountability for associated QA performance, in compliance with PSDs Quality Assurance obligations.

*Representing senior management, as one of the three lead multidisciplinary team leads, on all Property Maintenance Framework Meetings and on all associated ICT Framework meetings, and other contractual meetings where applicable.

*Any other relevant duties as required by line management.

The above list is not exhaustive but gives a good indication of the main duties of a Principal Professional and Technical Officer (PPTO Multidisciplinary Team Lead (Electrical Engineering)) within CPD. The emphasis on particular duties will vary within each division and branch and may develop over time according to business needs.

Essential Experience/Qualifications

1.Be a current Chartered Electrical Engineer.

AND

2.Have at least 3 years experience in the design and delivery of electrical services within nondomestic buildings** with a total aggregate value of at least £1M per annum.

AND

3.Have at least 3 years experience of successfully leading a team of staff in the construction sector.

Relevant or Equivalent Qualifications

Applications will also be considered from applicants with relevant formal qualifications considered to be of an equivalent or higher standard to those stated.

Relevant or equivalent qualifications: give the type of qualification and date awarded (the date awarded is the date on which you were notified of your result by the official awarding body). If you believe your qualification is equivalent to the one required, the onus is on you to provide the panel with details of modules studied etc so that a well-informed decision can be made.

For further details please apply directly below or contact Anne-Marie Erhalim directly.

If successful you will be required to complete a criminal record check through Access NI, having a criminal conviction will not necessarily exclude you from this process. Cpl have a policy on the recruitment of ex-offenders, for a copy of this policy please email

Cpl is an equal opportunities employer and welcomes applicants from all backgrounds. We recognise that a diverse and inclusive workplace will betterour relationships and services with our clients, our candidates, our communities, and one another. Be You, Be Kind, Be Proud.

Skills:
Leading Electrical Manage

Benefits:
Flexitime Paid Holidays Expenses Mileage

Maintenance Engineer (Electrical)

£40,000-£46,500

Ballymena

The Role:

As a Maintenance Engineer, you will play a key role in ensuring the smooth and efficient operation of all electrical, mechanical, and automated systems within a modern, fast-paced food production facility. You will be entrusted with the maintenance, reliability, and performance of critical equipment, supporting continuous production and minimising downtime. This position offers autonomy, responsibility, and the opportunity to apply your technical expertise in a dynamic environment.

Key Responsibilities:

• Uphold all health, safety, and hygiene requirements in line with company policies and industry regulations
• Carry out installation, repair, and ongoing maintenance of electrical and/or mechanical production machinery
• Diagnose electrical and mechanical faults quickly and effectively
• Complete all scheduled preventative maintenance tasks to the required standard
• Provide technical support and guidance to all operational departments
• Maintain site infrastructure to a consistently high standard
• Identify and implement solutions that enhance machine reliability, performance, and quality
• Utilise the on-site CMMS to drive efficiency and cost improvements
• Adhere to all food safety, quality, legal, and environmental policies and procedures

Essential Criteria:

• Time-served Electrical and/or Mechanical Engineer
• Minimum of 2 years recent experience within an industrial or high-volume production environment
• Highly self-motivated, with the ability to perform effectively in a fast-growing and pressurised setting
• Strong written and verbal communication skills in English
• Demonstrable experience in fault-finding and working with electrical control panels
• Excellent analytical and problem-solving abilities

If interested in hearing anymore details regarding the role. Don’t hesitate to reach out to Morrie on or email

An established and growing food manufacturing business operating within the bakery sector is seeking an experienced Electrical / Multi-Skilled Maintenance Engineer to join its engineering team. The company supplies high-quality products to retail and food service customers and operates within a fast-paced, high-volume production environment.

Reporting to the Engineering Manager, you will be responsible for maintaining, troubleshooting and improving production and packaging equipment to minimise downtime and ensure operational efficiency.

This is a hands-on role requiring strong electrical fault-finding ability combined with solid mechanical maintenance skills.

Key Responsibilities

• Carry out planned preventative maintenance (PPM)
• Respond quickly and effectively to breakdowns
• Electrical fault-finding on motors, drives, sensors, control panels and PLC systems
• Mechanical maintenance including conveyors, gearboxes, pneumatics, belts and bearings
• Support installation and commissioning of new equipment
• Complete maintenance documentation accurately
• Ensure compliance with Health & Safety and food safety standards

Essential:

• Recognised engineering qualification (NVQ Level 3 / City & Guilds / Apprenticeship or equivalent)
• Proven experience in a manufacturing / FMCG environment
• Strong electrical diagnostic and fault-finding skills
• Ability to read electrical schematics and technical drawings

Desirable:

• PLC fault-finding experience
• Food production or bakery experience
• 18th Edition qualification
• Experience using CMMS systems

In return for a Competitive salary, Pension scheme, Paid holidays, overtime opportunities, ongoing training and development and lots more!

For more information, please apply now!

Skills:
Maintenance Electrical Multiskilled

Portadown
£40,000 - £45,000
Days | Permanent

Vickerstock are working in partnership with a long-standing manufacturing firm based in Portadown to recruit a Maintenance Engineer to join their engineering team.

This is a fantastic opportunity for a skilled Engineer to join a well-established company with continued investment in their people, equipment and processes. You’ll be working on a range of electrical and mechanical equipment across a fast-paced production environment.

As a Maintenance Engineer, you will be responsible for:

• Carrying out both planned and reactive maintenance across all plant machinery and equipment
• Diagnosing and repairing faults to minimise downtime
• Supporting continuous improvement initiatives across the site
• Ensuring all work is carried out in line with health & safety standards
• Participating in root cause analysis and long-term maintenance solutions

What you’ll need to succeed:

• Time-served Engineer with a recognised apprenticeship or relevant qualification (NVQ Level 3 or equivalent)
• Strong mechanical and electrical fault-finding skills
• Previous experience within a manufacturing or production environment
• Ability to work independently and as part of a team
• Flexibility to support occasional out-of-hours work when required

What’s in it for you?

• Competitive salary
• Opportunity to work in a stable, forward-thinking business
• Supportive management and investment in ongoing training
• Clear progression routes within the team

Sound like your next move?
If you’re a hands-on Maintenance Engineer looking to take the next step in your career, we’d love to hear from you.

For a confidential discussion on this opportunity, contact Warren Watson at Vickerstock on or send your CV via the link.

Vickerstock are acting as an employment agency in relation to this vacancy.

Skills:
Maintenance Engineer Junior Maintenance Junior Engineer Maintenance Technician

Day shift
Greater Belfast
£45k - £50k

Vickerstock are working in partnership with a leading manufacturing firm in the Antrim area to assist them with the recruitment of a Maintenance Engineer.
Our client specialises in a range of products for the building, commercial and industrial sectors as well as a niche product for domestic customers.
Since their inception, they have gone from a small local manufacturer to a household name within the Construction and Manufacturing sectors.

What is it in for you?

• Day shift role 40 hours per week, with 23 days of annual leave in addition to 8 statutory holidays per annum.
• Private medical cover

Your Responsibilities as a Maintenance Engineer:

• Uphold exemplary Health & Safety, quality and housekeeping standards, and report any shortfalls immediately.
• Perform fault diagnosis to PLC level (Allen-Bradley & Siemens).
• Execute preventative maintenance according to schedule, logging both planned tasks and breakdown interventions; develop comprehensive PM instructions and maintain critical spares lists.
• Troubleshoot and rectify electrical and mechanical failures on plant machinery, analysing all potential root causes, evaluating options, and implementing effective solutions.
• Conduct root-cause analyses and apply learnings to drive ongoing improvements.
• Keep electrical schematics and technical documentation fully current.
• Manage the procurement, installation and commissioning of new plant and equipment in coordination with the Projects Department.
• Liaise with production and maintenance teams to resolve breakdowns, determine priority actions and ensure prompt, efficient repair.
• Utilise systems and data interrogation tools to spot trends and identify opportunities for continuous enhancement.

As a Maintenance Engineer, ideally you will have:

• A trade qualification in an electrical discipline (essential).
• At least five years’ experience in an electrical role within a comparable manufacturing setting.
• Proven ability to fault-find back to PLCs and, preferably, experience in modifying inputs, outputs and parameter settings.

What we hope you will do next;

Contact Warren Watson to discuss this in absolute confidence or send an updated CV via the link on the page or contact me on

By applying for this role, you accept the terms of processing, please find our privacy policy on our website.

As an experienced specialist senior engineering and manufacturing recruitment professional with 7 years’ experience; I personally specialise within the recruitment of Maintenance Engineers at all levels across Ireland.

If you are interested in this vacancy, or work within Engineering / Manufacturing in Ireland, then please apply with your CV to me for consideration - (You can also find and connect with me on LinkedIn)

Skills:
Maintenance Engineer Maintenance Technician Mechatronic Engineer Shift Engineer