OUR COMPANY

EOS IT Solutions is a global technology and logistics company, providing collaboration and business IT support services to some of the world’s largest industry leaders. We deliver forward‑thinking solutions based on multi‑domain architecture. Customer satisfaction and commitment to superior service quality are our top business priorities, along with investing in and supporting our partners and employees.
We are a true international IT provider and are proud to deliver our services through global simplicity with trusted transparency.

POSITION OVERVIEW
We are seeking an experienced AV/RF Systems Design Engineer to support the design, optimisation, and technical integrity of advanced radio and communication solutions. This role centres on RF/AV system design excellence while offering the opportunity to upskill into LMR (Land Mobile Radio) technologies.
You will work across system design, configuration support, technical troubleshooting, and documentation, ensuring high‑quality engineering output for global communication environments.

WHAT YOU WILL DO
Systems Design & Architecture

• Develop and validate AV/RF system designs and Bills of Materials based on survey data, including GRID Mapping outputs.
• Produce standardised DAS and RF design documentation and contribute to continuous improvement of design processes.
• Support the selection, testing, assembly, and standardisation of technology components for radio and AV network systems.
• Assist in planning and developing RF network architectures in collaboration with cross‑functional teams.
• (Optional Upskill Area) Contribute to LMR system components such as fleet mapping, configuration, and RF spectrum analysis as development progresses.

Technical Configuration & Optimisation

• Support configuration and programming of RF/AV systems at a system level.
• Collaborate with installation and sustainability partners on system testing and performance optimisation.
• Run technical reports to assess system performance, diagnose issues, and ensure efficient system operation.

Advanced Technical Support & Troubleshooting

• Provide Tier 2/3 technical troubleshooting for AV/RF system issues.
• Diagnose equipment and system failures, escalating when necessary.
• Support RF engineering tasks associated with outages or performance concerns.

Technical Review & Quality Assurance

• Conduct peer reviews and quality checks of RF/AV system designs.
• Participate in and lead technical design reviews.
• Produce accurate as‑built configuration documentation.

Research & Development Support

• Engage in R&D initiatives related to RF and communication technology evolution.
• Support hands‑on technical evaluations, lab testing, and proof‑of‑concept deployments.
• Analyse feasibility, performance, and integration requirements for new technologies.
• Present technical findings and recommendations to senior stakeholders.

Documentation & Collaboration

• Maintain clear documentation of system design parameters, RF coverage plots, and technical project information.
• Keep stakeholders updated on project progress and technical developments.
• Collaborate across engineering, sustainability, and operations teams to resolve system requirements and issues.

ESSENTIAL CRITERIA

• 3–5 years’ experience in an RF, AV, or systems design engineering role.
• Experience with analog/digital system design (e.g., DAS, RF distribution, P25/DMR/TETRA familiarity beneficial but not mandatory).
• Proficiency using design and system configuration tools.
• Strong troubleshooting and technical documentation skills.

DESIRED CRITERIA

• Experience with AutoCAD, BIM360/365, or Bluebeam.
• Exposure to LMR systems (or motivation to upskill into LMR technology).
• RF design or software certification (e.g., iBwave or equivalent).

BELONGING AT EOS

EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We welcome applications from all individuals regardless of gender, gender identity, gender reassignment, age, religious or similar philosophical belief, race, national origin, political opinion, sexual orientation, disability, marital or civil partnership status, or any other non‑merit factor.

#IND # LI-CT2

OUR COMPANY

EOS IT Solutions is a global technology and logistics company, providing collaboration and business IT support services to some of the world’s largest industry leaders. We deliver forward‑thinking solutions based on multi‑domain architecture. Customer satisfaction and commitment to superior service quality are our top business priorities, along with investing in and supporting our partners and employees.
We are a true international IT provider and are proud to deliver our services through global simplicity with trusted transparency.

POSITION OVERVIEW
We are seeking an experienced AV/RF Systems Design Engineer to support the design, optimisation, and technical integrity of advanced radio and communication solutions. This role centres on RF/AV system design excellence while offering the opportunity to upskill into LMR (Land Mobile Radio) technologies.
You will work across system design, configuration support, technical troubleshooting, and documentation, ensuring high‑quality engineering output for global communication environments.

WHAT YOU WILL DO
Systems Design & Architecture

• Develop and validate AV/RF system designs and Bills of Materials based on survey data, including GRID Mapping outputs.
• Produce standardised DAS and RF design documentation and contribute to continuous improvement of design processes.
• Support the selection, testing, assembly, and standardisation of technology components for radio and AV network systems.
• Assist in planning and developing RF network architectures in collaboration with cross‑functional teams.
• (Optional Upskill Area) Contribute to LMR system components such as fleet mapping, configuration, and RF spectrum analysis as development progresses.

Technical Configuration & Optimisation

• Support configuration and programming of RF/AV systems at a system level.
• Collaborate with installation and sustainability partners on system testing and performance optimisation.
• Run technical reports to assess system performance, diagnose issues, and ensure efficient system operation.

Advanced Technical Support & Troubleshooting

• Provide Tier 2/3 technical troubleshooting for AV/RF system issues.
• Diagnose equipment and system failures, escalating when necessary.
• Support RF engineering tasks associated with outages or performance concerns.

Technical Review & Quality Assurance

• Conduct peer reviews and quality checks of RF/AV system designs.
• Participate in and lead technical design reviews.
• Produce accurate as‑built configuration documentation.

Research & Development Support

• Engage in R&D initiatives related to RF and communication technology evolution.
• Support hands‑on technical evaluations, lab testing, and proof‑of‑concept deployments.
• Analyse feasibility, performance, and integration requirements for new technologies.
• Present technical findings and recommendations to senior stakeholders.

Documentation & Collaboration

• Maintain clear documentation of system design parameters, RF coverage plots, and technical project information.
• Keep stakeholders updated on project progress and technical developments.
• Collaborate across engineering, sustainability, and operations teams to resolve system requirements and issues.

ESSENTIAL CRITERIA

• 3–5 years’ experience in an RF, AV, or systems design engineering role.
• Experience with analog/digital system design (e.g., DAS, RF distribution, P25/DMR/TETRA familiarity beneficial but not mandatory).
• Proficiency using design and system configuration tools.
• Strong troubleshooting and technical documentation skills.

DESIRED CRITERIA

• Experience with AutoCAD, BIM360/365, or Bluebeam.
• Exposure to LMR systems (or motivation to upskill into LMR technology).
• RF design or software certification (e.g., iBwave or equivalent).

BELONGING AT EOS

EOS is committed to creating a diverse and inclusive work environment and is proud to be an equal opportunity employer. We welcome applications from all individuals regardless of gender, gender identity, gender reassignment, age, religious or similar philosophical belief, race, national origin, political opinion, sexual orientation, disability, marital or civil partnership status, or any other non‑merit factor.

#LI-CT2 #IND

Senior Project EngineerBirmingham

PermanentCompetitive Salary + Car/Car Allowance + Flexible Benefits: Competitive, DOE

Summary

We have an exciting opportunity for an ElectricalSenior Project Engineer to join our Midlands team and help deliver a significant project as part of the infrastructure / rail division

This role plays a pivotal part in delivering this key project that forms part of a wider national programme and will help us to deliver on specific packages. You’ll be responsible for ensuring projects are delivered to specification, on time, and within budget.

You will work closely with various teams from design stage through to delivery to drive excellence and continuous improvement throughout the project lifecycle.

Some of the key deliverables in this role will include:

• Responsibility for the Electrical packages of the project and their successful delivery.
• Leading Health & Safety practices across all project activities, ensuring our “Safety first and foremost” culture is upheld.
• Supporting pre-commencement procedures to minimise risk and ensure compliance with company governance.
• Identifying and managing project risks and opportunities, taking ownership of mitigation strategies.
• Re-engineering installations to meet customer requirements while optimising profitability.
• Providing accurate and timely progress updates for both site and financial reporting.
• Ensuring all activities comply with internal procedures and external legislation.
• Leading and engaging project teams, setting clear expectations and managing performance.
• Building strong relationships with customers to support efficient delivery and future opportunities.
• Managing successful project closure, ensuring quality, commercial targets, and compliance are met.

What we’re looking for:

We’re looking for a proactive and inspiring engineering professional who thrives in a collaborative environment and is passionate about delivering excellence. You’ll be someone who:

• Has a background of delivering on major projects from an electrical bias.
• Demonstrates strong leadership and team engagement skills.
• Has a solid understanding of project engineering within a construction environment or, ideally, from a rail background.
• Is confident in managing risk, compliance, and customer relationships.
• Is committed to continuous improvement and high-quality delivery.
• Brings a solutions-focused mindset and a drive for innovation.

Benefits:

We’re always evolving our benefits to ensure we’re attracting and retaining great people. Some of what you can expect includes:

• Car/Car allowance
• Salary sacrifice car scheme (Hybrid/Electric Vehicle)
• Pension with a leading provider and up to 8% employer contribution
• Personal Wellbeing and Volunteer Days
• Private Medical Insurance
• Free 24/7 365 Employee Assistance Program (including counselling sessions and legal advice)
• Flexible benefits including Dental Insurance, Gym Memberships, Travel Insurance, Tax-Free Bikes
• Personal development programme

Next Steps:

As a business, we’re on a journey to build on our culture where everyone is included, treated fairly and with respect. This starts with recruitment and how we bring people into the organisation.

We’ll do our best to outline the recruitment process to you ahead of time with plenty of notice. If you require any accommodations to participate in the application or interview process, please let us know and we will work with you to ensure your needs are met.

About Us:

We are one of the leading independent engineering and services businesses in the UK. Founded in 1921, with a turnover of £500m and 3000 employees, we are proud of our history of developing great people through our investment in training.

Working across a variety of sectors within the building and infrastructure industry, our innovative, responsible and forward-thinking approach allows us to work on fantastic ground-breaking projects, providing solutions using the latest tools and technologies.

Progression is something we value, and we will make sure that when you join us you have a clearly defined development path, supported by regular reviews, training and ongoing support to enable you to be the best you can be.

#LI-MD1

Archangel Lightworks is a connectivity company building wireless technology to create the space-enabled networks of the future. Were passionate about improving humanitys communications infrastructure and solving some of Earths most critical problems, from economic inclusion to climate change. Our start-up is a fast-paced and supportive environment, where you can make your mark as part of a growing team and work on the cutting-edge of innovation.

Were looking for a Mechanical Engineer / Mechanical Design Engineer to join our experienced engineering team and deliver novel laser communications technology. You will be working on the development of our structural and mechanical systems for our optical communication terminals, with a near-term focus on ground systems. This includes modifying existing designs to meet new needs in addition to designing new equipment. In this role, you will work closely with our Senior Mechanical Engineer and with the Optical, Electrical and Controls disciplines to deliver high performance structures and mechanical pointing devices. This role would suit an engineer who enjoys solving challenging, real-world mechanical problems by taking ownership of designs through iterating and testing.

Your responsibilities will include:

• Design of mechanical components and assemblies to support the development of cutting-edge products
• Structural analysis of components and systems, including hand calculations and FEA
• Creation of detailed drawings and supporting documentation
• Supporting and participating in practical assembly, integration, and test activities
• Working with external suppliers and manufacturers
• Creating BOMs for systems and interacting with the MRP system

Requirements:

• Degree in Mechanical Engineering or equivalent
• 4+ years of industry experience in mechanical design excluding placements
• Competent use of CAD and FEA software (SolidWorks and ANSYS preferred)
• Good Design for Manufacture knowledge; manufacturing processes such as metal CNC and materials knowledge
• Proven ability to produce manufacturing-ready drawings and tolerances to the drawing standard ISO BS 8888 and GD&T
• Practical experience with mechanical assembly and system integration
• Able to work independently in a fast-paced environment
• Proven ability to take ownership of designs and drive them through concept, iteration, and testing

Desirable additional skills:

• Skilled in hand calculation and engineering simulation
• Experienced with opto-mechanical or high-precision mechanical design, including alignment-critical assemblies and sensitivity to thermal expansion
• Experienced designing pointing mechanisms, precision motion systems or rotating assemblies which include bearings and motors
• Exposure to designing components for 3D printing

Location: Our office is based in Osney Mead, Oxford. There may be opportunity for occasional work from home as agreed with your line manager. Business travel may be required.

Salary: £40,000 £50,000

Compensation & Perks:

• The opportunity to make a difference building cutting edge technology to support a world-changing vision
• Options for hybrid working and custom arrangements that matter to you
• 25 days annual leave allowance plus bank holidays
• Equity options in a growing start-up
• Investment in you to help you grow, with training resources and budget
• Supportive team culture with high levels of ownership and responsibility
• Annual team retreat, regular socials and weekly team lunch
• Variety of additional perks including learning and wellbeing app subscriptions

Electrical Engineers - Why You Should Apply One of South Wales' leading manufacturers is seeking a talented Electrical Engineer to help lead their facility into the future. They offer the security and investment of a market leader, with the dynamic, hands-on challenges that keep top engineers engaged. Why it's a great move: You'll be rewarded with a salary up to £52,000 plus a bonus of up to 10% and a £2,500 call-out allowance. This is a business that invests in you, with a dedicated L&D team to fuel your growth. What you'll do: As the Electrical Engineer, you will lead a skilled electrical maintenance team, driving a culture of proactive maintenance and continuous improvement. From complex PLC diagnostics to hands-on problem-solving on critical drives and motors, you will be the go-to electrical expert. What you need: We're seeking an Electrical Engineer who excels in a demanding, heavy-industry environment. You solve electrical engineering problems that others can't, and you have the natural authority that inspires a team. Take the next step: If you're the Electrical Engineer I've just described, only your application stands between you and a confidential conversation about this career-defining role. Apply now. Let's talk. If you click 'Apply', we may contact you via email, phone & text message regarding this job, other jobs (current and future), and related recruitment services. You can OPT OUT at any time, full details in Privacy Policy, link sigmarec.co.uk/privacypolicy or find policy in Sigma website footer. Location & postcode of advert are approximate. If you don't hear from us within 14 days of application, you have not been shortlisted.

Job Title: Multi Skilled Shift Engineer (Electrical Bias)

Working for a leading global provider of integrated facilities and corporate real estate management. We are recruiting a Multi Skilled Shift Engineer (Electrical Bias) to join the team located in Oxford.

The job purpose is to carry out planned preventative maintenance, reactive works to building plant, equipment and systems in accordance with agreed service levels, undertake small installation works and respond to site engineering emergencies.

Key Tasks

• Ensure that routine maintenance is carried out to all electrical / Mechanical systems to meet and exceed expectations, and agreed service level agreements.
• Carry out reactive repairs on all systems as required calling relevant sub-contractors as required.
• Carry out all PPM maintenance as per the instruction set provided within Concept.
• Reporting of all PPM defects via KPMG defect process and liaise with the supervisor of defect requirements.
• Ensure weekly equipment reports are updated with any change in status of equipment.
• Liaise with sub-contractors as required for repairs / quotations, monitoring performance of sub-contractor personnel. Ensuring works have been undertaken correctly and work area has been left in a satisfactory condition.
• Sign off completed PPM and reactive tasks via your PDA in line with KPMG policies and procedures in a timely manner.
• Ensure a professional image of the company is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times.
• Establish and maintain a good working relationship with the client representative and clients personnel.
• Ensure the provision of a safe & healthy working environment, and ensure compliance with all company policies and procedures, as well as client site policies, procedures and working arrangements, as required.
• To accurately maintain the site logs and associated paperwork.
• To be involved in call out rota if applicable
• Understand and maintain the all systems on site
• Liaise and work with other trade engineers to ensure electrical issues on all systems are attended to and resolved within SLA agreements
• Ensure a professional image of the company is presented to clients and visitors, and ensure excellence in customer service is delivered and promoted at all times.
• Ensure that professional and technical skills are maintained through a commitment to personal development and life-long-learning.

Person Specification

Skills

A good basic education is essential, with good written and spoken English and basic mathematical skills.

Recognized Electrical Qualification

C&G 17th Edition in Electrical Installations

C&G Test and Inspection

Knowledge

Good knowledge of various Building electrical systems and working to Planned Preventative Maintenance Regimes

Current and relative knowledge of BS in relation to electrical systems on site Emerg ltg/Fire alarm/ power/BMS etc.

Experience

Previous working with structured PPM delivery

Experience of working with business critical equipment

Working within customer focused role.

Previous working within health and safety led role

Experience of electrical systems management and paperwork

Aptitude

Committed to the delivery of excellent customer service

Able to work under pressure

Able to make sound decisions when needed

Good timekeeping

Must be reliable and able to work without supervision

A team player

Good Communication

Circumstances

Able to work within a call out rota

Able to work shifts within the contract set up

Work between the London region KPMG sites

To be available for weekend and out of hours working as required.

Core Competencies

Competence to Deliver

Communication

Reliability

Innovation

Electrical Shift Maintenance Engineer
Barking, London
Up to £52,271 per year
4 on / 4 off shift pattern | 6am6pm / 6pm6am

We are currently recruiting for an Electrical Shift Maintenance Engineer to join a busy manufacturing site in Barking. This is an excellent opportunity to join an established engineering team responsible for maintaining plant equipment and improving operational reliability across the site.

The Role

• Carry out planned, preventative, and reactive electrical maintenance on plant equipment
• Support improvements in machine reliability and downtime reduction
• Work with contractors and oversee planned maintenance activities
• Use a CMMS system to record and manage maintenance work
• Support continuous improvement initiatives and engineering projects
• Ensure compliance with health, safety, environmental and quality standards

Requirements

• NVQ Level 3 in Electrical or Electronic Engineering (essential)
• Previous experience within a manufacturing, production or industrial environment
• Strong knowledge of preventative and reactive maintenance
• Experience working with continuous improvement processes
• 18th Edition (BS7671) is desirable

Nottinghamshire

Salary: £40,000 - £55,000 (DOE)

25 Days Holiday + Bank Holidays

The company:

Our client is a leading provider of mechanical engineering services in the area, supplying, designing an installing Bespoke Materials Handling Equipment and Special Purpose Machinery.

Established in the area, they have built a strong reputation for delivering quality service to their clients nationwide in the FMCG, and Logistics industries.

Their team designs and assembles a variety of products, including conveyor systems, robots, structural steel work, Crane Systems, and more. They pride themselves in a providing a high standard of craftsmanship and innovation, Working with multi-billion-pound business across the UK.

The business has grown incredibly from a turnover £12 million a decade ago to in excess of £50 million today.

They currently employ over 150 employees across the business, with around 10 engineers in the design team. As part of their continued growth they are looking to recruit two additional Senior Mechanical Design Engineers with immediate effect.

The Role

As a Senior Mechanical Design Engineer, you will be responsible for carrying all the design work for live projects the company are currently delivering.

Your responsibilities will include:

• Producing 3D models for conveyor systems on SolidWorks
• Producing detailed 2D manufacturing drawings for components and parts required for conveyor systems.
• Creating 2D layout drawings to show how the company’s equipment will fit into the client’s site.
• Attending internal meetings to discuss project progress
• Carrying out calculations required for sizing motors, cylinders and other parts required for the conveyor systems.
• Attending site visits and consulting clients to understand project requirements.
• Taking feedback from both the manufacturing and installation teams during projects to make any changes to designs as required.
• The role will see you using a combination for SolidWorks and AutoCAD dependent on project.

The Candidate

To be successful in your application for this Senior Mechanical Design Engineer role you will need:

• Previous use of SolidWorks is preferred but the client will consider other CAD packages if you previous conveyor system design experience.
• A general understanding of engineering principles and the ability to problem solve.
• Experience with the design of conveyor systems
• Strong attention to detail.
• Able to work well to project deadlines.
• Excellent communication skills and the ability to work independently.

The Benefits

For this Senior Mechanical Design Engineer role the following benefits are on offer:

• Competitive salary package - £40k - £55k Depending on experience.

• Office-based role, with small friendly team

• Working hours of: 8:30am – 5pm (Mon-Friday)

• With option for flexible hours starting as early as 6:30am

• 25 days of annual leave + bank holidays

• A supportive and collaborative work environment

• Opportunities for professional development and career growth within an expanding team

How to Apply:

If you are a motivated and experienced Senior Mechanical Design Engineer looking to join a growing company, we want to hear from you!

Please send your CV to Harjot Singh at or give me a call on

ATA Recruitment specialises in Manufacturing, Infrastructure, Civil, Transportation and general Engineering recruitment on both a permanent and contract basis – for more opportunities like this one, visit our website.

By applying you accept the terms of our Privacy Notice which can be found on our website

ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Info about the company We are working with a global manufacturer of safety-critical electronic instrumentation, developing sensor-based products used in industrial environments where reliability, accuracy and compliance are essential. They are looking for an Electronics Engineer to join their engineering team, contributing to the design and development of embedded electronic systems, PCB hardware and sensor-driven instrumentation. Youll work closely with firmware, software, hardware and systems engineers, helping develop next-generation products used worldwide. Benefits Hybrid working Company Shares Paid, external training and development Healthcare Cash plans, Eyecare scheme, life insurance Info about what the Electronics Engineer role entails This is a hands-on Electronics Engineer role focused on embedded hardware design, PCB development and system-level integration. Youll work across the hardwarefirmware boundary, designing electronic circuits and supporting embedded firmware integration on microcontroller-based systems. The role covers the full product lifecycle from concept design and prototyping through to testing, validation and production release, working in a collaborative R&D environment with multidisciplinary engineering teams. Key Responsibilities Design and develop electronic circuits and embedded hardware systems. Support PCB design, schematic capture and component selection. Contribute to embedded firmware development in C/C++ for hardware bring-up and system integration. Integrate sensors and communication protocols (UART, SPI, I2C, Modbus). Prototype, test and debug embedded electronics and PCB-level systems. Diagnose and resolve hardware and firmware integration issues. Support product validation, testing and regulatory compliance activities. Work collaboratively with firmware, software, sensor and test engineering teams. Essential Requirements of a Electronics Engineer Strong experience designing electronic circuits and embedded hardware systems. Experience working with microcontroller-based embedded systems. Solid understanding of analogue and digital electronics design. Experience with PCB design, debugging and hardware testing. Understanding of embedded communication protocols (SPI, I2C, UART, Modbus). Experience working in R&D or product development environments. Desirable Requirements of a Electronics Engineer Experience contributing to embedded firmware development in C or C++. Experience developing low-power embedded electronics or sensor-based products. Familiarity with safety-critical or regulated engineering environments. If you feel you are suitable and interested in this role, APPLY NOW with an up to date CV. We also pay referral fees if you can suggest another suitable person that isnt already known to us. April Quest Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003. We take your privacy seriously; our Privacy Policy can be viewed on our website.

Aberdeen
3-Month Contract (high chance of extension)
Onsite
Outside IR35
£50-£55 per hour (please still apply if looking for more)

We are supporting a client in Aberdeen with the appointment of an Electrical Project Engineer for an initial 3-month contract. This role will be fully onsite and sits outside IR35.

This opportunity would suit an engineer with strong electrical design experience and a background delivering projects involving batteries, UPS systems, and wider electrical engineering solutions.

The role
You will be responsible for supporting the design and delivery of electrical engineering projects, from technical development through to project execution. The position will involve a mix of design work, project coordination, and technical documentation.
Key responsibilities

• Produce electrical designs, schematics, and technical drawings using EPlan and AutoCAD
• Support technical development across electrical engineering projects
• Prepare quotations for project work
• Place orders for electrical equipment and components
• Define test specifications to support project delivery
• Contribute to the successful execution of project activities onsite

Requirements

• Bachelor’s degree in Electrical Engineering or a related discipline
• Proven experience in electrical design and project delivery
• Previous experience working with batteries and UPS systems
• Strong capability using EPlan, AutoCAD, and other electrical design software
• Able to work effectively in an onsite project environment

If you think this is a good role or know anyone who would be interested, please do send your CV and I will give you a call. They are looking to start interviewing this Friday.

Kind regards,

£45,000 - £46,000 + Training + Progression + Days Based + Qualifications + Life Assurance
Leominster

Are you a Maintenance Engineer with an engineering qualification looking to join an industry leader that will provide a stable role in a growing business, where you will work days-only whilst having the opportunity to build on your career through funded training courses?

On offer is the opportunity to work in a varied role where you will be an integral member of the team, working alongside other engineers carrying out preventative and reactive maintenance, ensuring minimal downtime and the smooth running of the plant.

This company are market leading manufacturer, recognised for its innovation, high-quality standards, and dedication to sustainability. With a strong focus on growth and employee development, they renowned for their staff development.

This role would suit a Maintenance Engineer with any engineering qualification, looking to join a successful business that will enable your success and growth.

The Role

• Preventative and reactive maintenance of machinery and equipment
• Assisting with internal maintenance projects
• Ensure health and safety standards are obtained
• 2 week rotating shift pattern with early (05:30-13:30) and late (9:30-17:30) weekday shifts, with occasional weekends & paid overtime

The Person

• Maintenance Engineer or similar

• Engineering qualification

Reference Number: BBBH24347

Manufacturing, Electrical, Mechanical, Maintenance, Engineer, Multi-Skilled, Electrical, FMCG, Production, Engineering, Shobdon, Kingsland, Ludlow, Kington, Monkland, Bromyard

If you are interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

Location: Birkenhead (Hybrid after initial onboarding)
Salary: Up to 40,000 (flexible depending on experience)

About the Role

We are looking for a motivated Control Systems Engineer to join our growing and collaborative team based in Birkenhead. This is a fantastic opportunity to work with a wide range of industry-leading clients while developing your skills in automation and control systems.

You will be involved in PLC programming, system commissioning, and supporting automation projects across multiple industries including process and manufacturing. The role will involve occasional travel across the UK and Ireland.

Control Systems Engineers typically work on designing, programming, testing and commissioning automation systems while collaborating with engineering teams to deliver reliable solutions for industrial processes.

Why Join Us

• Friendly and supportive company culture
• Strong focus on professional development and training
• Opportunity to work with a diverse range of industry-leading clients
• Collaborative working environment
• Be part of a relaxed yet dynamic team

Key Responsibilities

• Develop and maintain PLC programs using platforms such as Siemens or Rockwell
• Support commissioning and testing of control systems on-site
• Work collaboratively with internal teams and clients to deliver automation solutions
• Troubleshoot and resolve control system issues
• Contribute to project documentation and system improvements
• Support engineering projects across different industries including process and manufacturing

Skills & Experience

• Minimum 2 years’ experience in control systems or automation
• Experience with PLC programming (Siemens or Rockwell preferred)
• Exposure to onsite commissioning
• Ability and willingness to travel within the UK and Ireland
• Flexible to work across a variety of industries such as manufacturing or process
• Background in maintenance engineering or panel building is advantageous
• Driven, proactive, and keen to develop within a growing business

Benefits

• Pension scheme - 3% employer / 5% employee contribution (NEST)

• 20 days holiday + bank holidays, increasing by 1 day per year up to 25 days

• Access to a fleet of company vans for travel

• All travel expenses covered

• Ongoing training and development investment

• Overtime available

  • 1.3x weekday rate
  • 1.5x weekend rate

Location

The role is primarily based at our Birkenhead site.

Working: The role offers flexible working but does require engineers on site for 4-5 days per week and is on a secure site where SC clearance is needed.
.
We have a great opportunity for an Electronics Test Engineer to join the Manufacturing team at one of our major defence clients.
.
The Manufacturing Test Engineer will be providing technical support to the manufacturing test capability, to ensure programme targets are met to agreed time, cost and quality requirements.
.
The Manufacturing Test Engineer will be working with a small team of dedicated engineers in a fast-paced but friendly and inclusive manufacturing environment. The team has a great mix of people, ranging from apprentices and graduates through to experienced engineers, all striving to deliver technical excellence across a number of different projects in development and production.

Main Responsibilities;

• Providing Test Engineering support during Design / Development phases from initial concept through to Production Readiness Review and release to Operations.
• Supporting Test Facility introduction and ensuring that appropriate configuration control of equipment and facilities is in place prior to use, including generating supporting test specifications and operator instructions.
• Supporting testing of electrical/electronic sub-assemblies and circuit cards, with diagnosis of production test failures down to component level.
• Working closely with Operations, the design teams and other stakeholders to overcome any technical challenges.
• Always aiming to deliver in line with all programme and quality requirements, whilst maintaining Test Engineering functional governance and pursuing continuous improvement.

Skill and Experience;

• Minimum HNC level of qualification or equivalent in a relevant subject (HND/Degree preferred) plus experience in digital and analogue electronics manufacture and test.
• A good understanding of electrical/electronic measurement and test principles and test equipment, as well as fault diagnosis techniques for electronic/electro-mechanical sub-assemblies.
• Experience of using both manual and automated test equipment, preferably in a defence organisation or similar manufacturing environment.
• Familiar with enterprise resource planning and manufacturing execution system programs (e.g. SAP, MES) for recording test activities and generating non-conformance reports and concessions.
• The ability to plan and organise own work in order to ensure multiple tasks can be prioritised and delivered against Project objectives.
• Good verbal and written communication skills, including generation of test specifications, operator instructions and technical reports based on higher-level requirements.
• Proven analytical and problem solving skills, with strong attention to detail.

Desirable Experience;

• Experience in the Defence or safety regulated environment would be advantageous
• Experience in the Naval / Maritime domain would be advantageous.

Even If you feel like you don’t meet every qualification, we encourage you to reach out an apply.

Company Benefits;

• Bonus: Up to 2,500 (based on performance). Up to 21% (based on performance)
• Pension: Up to 14% total contribution.
• Parental Leave: Enhanced parental, maternity, and shared parental leave.
• Flexi Leave: Up to 15 additional days.
• Facilities: On-site perks like subsidised meals and free parking.
• Training and Development: Excellent opportunities for career progression and skill development

Company Details;

• The company are a multi-national group, being No 1 in Europe for what they do! With a number of awards and recognitions, with great career progression and opportunities across the business!
• It’s no wonder, they have been among the winners of the annual Glassdoor Employees’ Choice Awards, 2022, and most recently receiving three accreditation gold standard awards with Investors in People!
• “Interesting work. Good work-life balance. Employees made to feel valued.” Software Engineer, 5 Dec 2022. Glassdoor review.
• “Promotes and believes in a good work/life balance interesting work on most programmes Encourages internal mobility. Offers good development/training opportunities” Principal Systems Engineer, 19 Dec 2022. Glassdoor review.
• True advocates of ED&I as an Equal Opportunity Employer! With over 10 Networking groups and communities across the business advocating Equity, Diversity and Inclusion.
• Enhanced parental leave: Offers up to 26 weeks for maternity, adoption and shared parental leave. Enhancements are available for paternity leave, neonatal leave and fertility testing and treatments.

CCL Global are currently recruiting for a Proposals Engineer to join a leading multinational engineering company within their Grid Solutions business. This position focuses on High Voltage (HV) AC & DC substation bids supporting the transition to green energy through offshore wind, grid-scale storage, and hydrogen projects.

Permanent / Full-Time (UK)

Location: Stafford, Staffordshire

• Lead technical coordination for tendering activities on HV AC & DC substations and renewable energy integration projects.
• Work closely with bid and commercial teams to prepare competitive and technically sound proposals.
• Provide expert substation design input covering primary plant layout, equipment selection, and integration.
• Analyse client requirements and define optimised technical and commercial solutions.
• Develop and deliver documentation for scope, schedule, and technical specifications in line with company processes.
• Collaborate with design, engineering, and tender teams to ensure high-quality, compliant bids.
• Interface with commercial, project, and product teams to align design solutions with execution strategy.
• Contribute to continuous improvement across bid development and engineering practices.
• Demonstrate deep industry understanding to shape value-driven bid strategies.

Requirements

• Bachelor s degree in Electrical or Power Engineering (or equivalent).
• Minimum 10 years experience in transmission and/or distribution tendering, design, or customer application engineering.
• Strong technical understanding of HV substations, including primary plant, protection and control, SCADA, OT cybersecurity, and telecom systems.
• Experience in HVDC and/or offshore wind projects considered advantageous.
• Proven ability to work under pressure and deliver within tight deadlines.
• Fluent in written and spoken English; strong communication and problem-solving skills.

CBRE Global Workplace Solutions is a leading global provider of integrated facilities and corporate real estate management.

We are recruiting an Electrical Test Engineer to join our team in the North West! This is a mobile role based in the Manchester area.

Role Summary:

• Perform comprehensive electrical testing, fault diagnosis, and rectification on a wide range of electrical systems and equipment, including LV distribution, final circuits, power, lighting and HVAC plant
• Execute planned preventative maintenance (PPM) schedules in accordance with agreed service level agreements (SLAs) and industry best practices SFG 20, BS7671, EAWR.
• Respond promptly to Critical safety observations in order to minimize downtime.
• Conduct Electrical Test and inspection services in accordance with CBRE Electrical Safety Rules, EAWR 1989 and Guidance Note 3
• Ensure all work is carried out in strict adherence to relevant electrical regulations, including BSth Edition IET Wiring Regulations, and United Utilities’ specific electrical requirements, such as those related to surge protection and hazardous area classifications where applicable.
• Undertake site surveys, prepare Works Requests, Method Statements, and Risk Assessments for all planned works, ensuring safe working practices.
• Maintain accurate site logs and associated paperwork, including detailed records of maintenance, testing, and repairs.
• Liaise effectively with the client (United Utilities representatives), subcontractors, and other CBRE team members to ensure seamless service delivery and communication.
• Proactively identify opportunities for improvement in electrical systems and maintenance processes.
• Adhere to all company and client health, safety, and environmental policies and procedures.

Qualifications & Experience

• Recognized Electrical Qualification, such as City & Guilds levels 1, 2 and 3 in Electrical Installations.
• City & Guilds 18th Edition IET Wiring Regulations qualification is essential.
• City & Guilds 2391 (or equivalent) in Inspection and Testing is essential.
• Proven experience as an Electrical Test Engineer or Electrical Bias Engineer, ideally within a critical environment or industrial setting.
• Strong technical understanding of industrial facility power distribution and coordination.
• Experience with power system schematics is beneficial
• Ability to interpret technical drawings, instructions, processes, and O&Ms.
• Strong problem-solving skills and attention to detail.
• Excellent communication skills, both written and verbal, to interact with clients and colleagues.
• A commitment to personal development and continuous learning to maintain professional and technical skills.

Hours

• Monday - Friday
• 8am - 5pm
• Overtime flexibility needed

Email for more information or apply today!

EQUAL OPPORTUNITIES

We are an equal opportunities employer and do not discriminate on the grounds of gender, sexual orientation, marital or civil partner status, pregnancy or maternity, gender reassignment, race, colour, nationality, ethnic or national origin, religion or belief, disability or age.

Role - Electrical Controls & Automation Engineer
Location - Leeds, Wes Yorkshire
Salary - £59k + up to 10% annual bonus subject to performance
Hours of work Monday to Thursday 8-5pm & every Fridays 4pm finish
Other benefits 5% employer pension + x4 death in service + private health care + 35days annual leave

The Client - Market leader in Manufacturing through Process engineering, multi-million-pound turnover business, with significant multi-million-pound CAPEX and related automation investment.

The Role of the Electrical Controls & Automation Engineer:

Due to significant investment and automation activities on a large, world-class manufacturing site, my client are in search for a PLC-biased Electrical Controls & automation Engineer to be based at the Leeds site as the first line automation support.
The electrical and controls automation engineer will be utilising their expertise in PLC programming, SCADA systems, and maintenance to optimize manufacturing processes, all whilst be hands on to provide emergency maintenance support as and when required. You will lead process improvements by collaborating with cross-functional teams to implement innovative solutions and enhance plant performance.

Key Responsibilities of Electrical Controls & Automation Engineer:

• Work with Programmable systems including HMI, SCADA, Servo Drives, IX developer
• Develop and implement projects to drive improvement in manufacturing availability
• New installations, including the programming of software
• Work with management team to contribute to key improvement projects
• Proactive in detecting, reporting, diagnosing and predicting potential or existing software and electronic issues on all equipment
• Diagnose and troubleshoot complex machine faults to reduce downtime

Requirements & Qualifications Electrical Controls Engineer

• Hold a NVQ Level 3 or Apprenticeship in Electrical Engineering
• Strong background in PLC systems and HMI software
• Automation/controls apprentice trained post minimum 5 years experieince within a process FMCG environment
• Experience in fault finding on industrial communication networks
• Experience with design and modifications of systems
• Ability to implement programmes and modify on a range of PLC/SCADA systems

What s on offer - Electrical Controls & Automation Engineer:

• Upto 10% company bonus
• Competitive salary of £59k
• Days based position perfect if you are looking to move away from shifts
• 35days annual leave

Candidates who are currently a PLC Engineer, PLC programmer, Electrical Engineer, Controls Technician, Controls Automation Engineer, may be suitable for this position.

ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Control Systems Engineer
Stafford - hybrid working
Up to 45k DOE

As a Control Systems Engineer, you will bring an innovative approach to problem solving, you will be working with highly skilled engineers to help you develop and succeed in your career.

The ideal candidate will have previous knowledge of PLC’s, SCADA, HMI, variable speed drives and instrumentation products, with experience in a maintenance / electrical background or similar.

Essential experience

• Experience in designing control system’s PLC and HMI/SCADA software and making amendments/upgrades to existing system software.
• Experience in producing project documentation
• Competence in the programming of PLC’s like Siemens, Rockwell, or Mitsubishi PLC’s AND / OR competence in programming SCADA systems like Siemens, Rockwell or Wonderware HMI/SCADA platforms.
• UK Sites commissioning (which may involve short periods away from home)
• Software Engineering Degree and/or Electrical qualifications
• Experience with Allen Bradley, Siemens Mitsubishi PLC’s or experience of SCADA systems like Wonderware, Iconics, Schneider or other platforms
• Good verbal and written communication skills
• Clean UK Driving License
• Must be eligible to work in the UK
• For Lead positions we would look for the ability to motivate and manage a team of engineers to improve performance (Must have over 5+ years experience)

Our client, a leading company in the defence sector, is currently seeking a Senior Hardware Engineer to join their team on a contract basis. This role offers an exciting opportunity for a specialist in hardware to apply their expertise across the full development life-cycle in a new and challenging environment.

Key Responsibilities:

• Conducting analysis of customer requirements
• Creating and modifying electronic designs and architecture
• Using simulation tools to generate verification test benches
• Participating in design reviews
• Performing configuration control
• Integrating hardware components

Job Requirements:

The successful candidate should possess experience in several of the following areas:

• Proficiency in designing analogue circuits, including amplifiers, filters, and oscillators
• Understanding signal integrity and electromagnetic compatibility (EMC) principles
• Familiarity with analogue-to-digital converters (ADCs), digital-to-analogue converters (DACs), and mixed-signal design
• Skills in designing power supply circuits and managing power distribution
• Proficiency in using oscilloscopes and spectrum analysers for testing and debugging
• Experience in hardware design and verification against an agreed set of requirements
• Good understanding of requirements capture, work package definition, and effort estimation
• Ability to create and modify analogue and digital hardware designs
• Module and system commissioning experience
• Support for the manufacturing department during build and test phases

If you are an experienced Hardware Engineer with a speciality in analogue design, and you are looking to take on a new and challenging role in the defence and security sector, we would like to hear from you. Apply now to join our client’s dynamic team.

Role:- Test and Inspection Engineer
Based:- St. Neots. Cambridgeshire PE19
Duration:- 12 months+
Rate:- 29.00 - 34.00 p/h PAYE

Our client is a leader within the Automation and Control Systems field with operations in over 100 countries worldwide.

They are seeking an experienced Inspection & Test Engineer to be based at their site in St. Neots, Cambridgeshire.

ROLE:

• To undertake the inspection of DCS, Network/Server Cabinets assembled on site to engineering drawings and bills of materials.
• Produce Inspection reports to highlight faults and corrective actions. (Quality Control)
• Staging and energisation of DCS cabinets for Project Teams
• Circuit/loop type testing and simulation tests
• Provide support during Factory Acceptance Tests as required
• Work as a member of the Inspection & Test team, helping to ensure projects are on time and on budget
• Maintain test equipment loan and calibration databases.

MAIN TASKS/RESPONSIBILITIES of the Test & Inspection Enginee

• Participate in the day to running of the Inspection Department
• Support the Project Engineering team throughout FAT

ESSENTIAL SKILLS/QUALIFICATIONS:

• Experienced and competent to Inspect electrical equipment related to the engineering drawings (preferably DCS cabinets)
• Be computer literate, able to maintain spreadsheets.
• Able to work as part of a team as well as on their own

QUALIFICATIONS:

• ONC/HNC/Degree in Electrical Engineering

Current UK residency required

With over 90 years’ combined experience, NES Fircroft (NES) is proud to be the world’s leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients.

Bedford

Salary Negotiable DOE

Monday - Friday

Your new company:

Based in Bedford, you will be joining a well-known and growing manufacturing business specialising in large-scale automated machinery manufacturing.

Due to increased business and continuous growth, they are now recruiting for an Automation Engineer with experience with PLC/HMI systems (Siemens S7 or Rockwell Control Logix) within an automated machinery environment.
Offering a very competitive and negotiable package, with a wide range of benefits, this is an excellent time to join an expert in their field.

Key Responsibilities & Duties:

• Carry out electrical engineering design and software development on machinery
• Carry out PLC commissioning and support global installations (4-5 trips/year)
• Collaborate across departments and liaise directly with customers
• Troubleshoot and resolve engineering issues
• Completion of the FAT document and ‘as-built’ electrical documentation.
• Assistance with engineering queries and manufacturing quality problems, as required.

This is a summed-up list, and other responsibilities and duties will be required.

Skills & Experience required:

• Experience in a similar role, within an automated machinery environment
• Experience with Siemens S7 and/or Rockwell Control Logix - Other experience will be accepted
• Ability to commission machinery
• Open to occasional international travel.
• Experience offering remote technical support.

What you need to do now if you’re interested in this role:

Click ‘apply now’ to forward an up-to-date copy of your CV or call us now. If this job isn’t quite right for you, but you are looking for a new position, please contact us now on (phone number removed) for a confidential discussion about your career.

Hays EA is a trading division of Hays Specialist Recruitment Limited and acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found at (url removed)

An exciting opportunity has arisen for a Battery Systems Engineer to join a pioneering startup developing next generation battery technology. This is a hands on role for someone who loves building, testing and iterating quickly. You’ll take ownership of battery pack design from concept through to flight, working collaboratively within a fast moving, inventive engineering team.

The Battery Systems Engineer will:

• Design and develop lightweight, high performance battery packs for drone applications.
• Create and implement effective thermal management solutions for performance and safety.
• Assemble prototype packs in-house and support development toward manufacturable designs.
• Design and integrate power electronics and BMS hardware within the overall system architecture.
• Establish and run test programmes for performance, cycle life, thermal behaviour and safety validation.

The Battery Systems Engineer will have:

• A hands on, practical approach with enthusiasm for building, testing and improving hardware.
• A degree in Electrical Engineering, Mechanical Engineering or a related discipline.
• 3+ years’ experience working on battery systems, including pack design and power electronics.
• Strong understanding of BMS architecture, protection strategies and charge/discharge behaviour.
• Experience with PCB design tools (Altium, KiCAD or similar).

If you enjoy end to end ownership, thrive in a collaborative startup environment and want to help develop cutting edge battery systems for next generation flight, this role offers the chance to make a real impact. Apply online and we will be in touch!