Location: Expected to spend 3-4 days/ week working from company site offices and balance of week remote working
Site office in Bridgwater should be considered as the primary office location however it may also be necessary to work from the Somerset Energy & Innovation Centre (SEIC) Bridgwater and Aztec West, Bristol as required.
Status: Full-time Mon-Fri, Contract INSIDE IR35 - *HYBRID\
Duration: 31dec26 (renewable)
Reports to: Area Integration Senior Engineer

Morson Edge are working with a major player in the Energy Sector who have current CONTRACT requirements for an Integration Engineer to join their established Project Delivery teams in Somerset - site based and/or Somerset Energy & Innovation Centre. Hybrid working arrangements, competitive all-inclusive daily rates, inside IR35.

Overview

• The position will be part of the Project Delivery Integration Team, part of the Project Management Office
• The purpose of the Delivery Integration Team is to ensure that the schedule of planned work 16 weeks prior to implementation is credible and deliverable. This entails resolving sequences in the schedule which cannot be delivered as originally planned and providing visibility of the availability of resources to deliver it whether labour, materials, equipment or logistics.
• The postholder will support in the review and development of construction sequences for structures, systems and components within their designated area from manufacturing completion through to site construction, erection and commissioning ensuring that the sequence supports key schedule milestones.

Typical Activities:

• Reviewing the construction schedule to ensure that identified sequence(s) can be implemented in conjunction with related structures, systems and other constraints.
• Review availability of materials and equipment to assess project readiness to commence works.
• Support resolution of “hotspots” to maintain the overall schedule milestones where necessary supporting “Best for Project” decision making.
• Providing oversight of the Project’s application of “Delivery Work Pack” & “Interface Data Sheet” procedures.

To support the above activities, the Integration Engineer will need to interact with many of the other functions on site, key ones being Engineering, Project Management, Planning, Procurement, Delivery, Commissioning and Site Operations. The Integration role is also likely to involve working on transverse issues across different Areas.
The analysis horizon of the Area Integration team needs to look beyond current on-going activities on Site, typically they should be working to deliver a credible schedule well in advance of T-16 weeks before planned implementation.

Applications

• The Integration Engineer will need to use 3D and/or 4D tools, such as Navisworks and/or Synchro.
• They need to be able to interrogate a P6 schedule and manipulate data extracted from it using Excel and present it using the other Microsoft Office and online tools.
• They will also need to manage data via databases or PowerBI.

Criteria for Success:

• The Integration Engineer will have a broad understanding of Engineering, Procurement and Construction activities and the integration of these activities. They will also have a good understanding of project planning processes and the ability to identify and support the resolution of complex issues and interfaces. Delivery integration has a wide-ranging perspective of the project, consequently Area Integration Engineers need to be able to work collaboratively with a wide range of stakeholders using good analytical, communication and influencing skills to gather data and agree resolutions.

Experience & Skills

• Degree in Civil, Mechanical, Electrical, Process OR Chemical Engineering OR equivalent in Construction Management, or related subject, or a demonstrable level of experience based on years of experience and project assignments.
• Experience in delivering complex projects within highly regulated environments
• Knowledge and experience of planning tools (P6), 3D model interrogation (Navisworks) and use of Microsoft Office software suite packages particularly Excel and Power point (highly advantageous)
• Construction health and Safety qualification e.g. IOSHH Managing Safely (Desirable)

At Quest Global, we are hiring Manufacturing Engineerfor one of our Aerospace customers, which is 12 months rollable contract with Outside IR35 and Hybrid role, requires travel around UK and EU

Job Requirements

• Develops and optimises casting processes to ensure stable production, high yield, and metallurgical conformity for blades and vanes.
• Validates machining operations by defining cutting parameters, tooling strategies, and process controls for consistent dimensional accuracy.
• Good Knowledge of Casting and machining process of turbine blade and vanes
• Leads FAIR and process qualification activities such as PFMEA, control plans, capability studies, and run-at-rate to ensure manufacturing readiness.
• Troubleshoots process issues across casting and machining to eliminate defects, reduce variation, and improve first-time-right performance.
• Collaborates with suppliers to resolve casting or machining problems and enhance process capability throughout the supply chain.
• Ensures compliance to aerospace standards by maintaining robust processes aligned with quality, special process, and configuration requirements.

Work Experience

Good knowledge on various manufacturing processes

Fully conversant in reading and understanding Engineering & Manufacturing Drawings

Sound knowledge interpreting the GD&T (standards ASME Y 14.5, JES 161)

Sound knowledge in measurements system analysis (MSA)

Hands on experience in using all types of measuring & testing equipment, both contact - non-contact, analogue & digital

Able to support root cause analysis and implementation of problem solving techniques like 8D

Working knowledge and experience of using QC tools and SPC analysis

Hands on experience of working in CFTs for creation of PFMEA and control plans

Working knowledge on concessions, containment procedures and traceability techniques

Sound knowledge and experience of working on FAIR, APQP, PPAP

Awareness of aerospace requirements (AS9100, various ISO)

Benefits

Customer Focus

Problem Solving Ability

Good Communication in English

Team Player

Self-Motivated & a Self-Starter

Contract | Onsite | Gaydon

Contract Details

• £37 per hour - Inside IR35
• 6-month or 12-month contract available
• Immediate start required
• Onsite role - Gaydon

Role Overview

We’re looking for a Manufacturing Simulation Engineer to lead the development of Discrete Event Simulation (DES) models for manufacturing systems.
You’ll analyse production flow, identify bottlenecks, optimise throughput, and support major vehicle or system programmes from concept through to delivery.

Key Responsibilities

• Build, develop, and deliver Discrete Event Simulation models that represent full manufacturing process flow from concept to launch.
• Analyse production performance, throughput, cycle time, buffer sizes, and system availability.
• Identify bottlenecks and provide recommendations to improve system efficiency.
• Optimise manufacturing systems using DES ‘what-if’ scenarios and operational variants.
• Collaborate with cross-functional engineering, production, and scheduling teams to ensure system readiness.
• Produce clear documentation, dashboards, and reports to support decision-making.
• Mentor junior engineers and support ongoing improvement of simulation tools and techniques.

Key Skills & Experience

• Strong hands-on experience with Discrete Event Simulation tools (e.g., Lanner Witness or Siemens Plant Simulation).
• Proven background in modelling production flows and solving complex system performance issues.
• Experience delivering DES models to programme KPIs and production targets.
• Understanding of lean manufacturing tools and techniques.
• Strong communication skills with the ability to present complex ideas clearly.
• Comfortable working in fast-paced manufacturing environments.

Who This Role Suits

This role is ideal for someone who enjoys:

• Turning complex manufacturing systems into accurate digital simulations
• Solving efficiency and throughput challenges
• Working closely with engineering and production teams
• Leading simulation workstreams and driving system improvements

Astute’s Power team is partnering with a leading global provider of environmental solutions a to recruit a Technical Plant Engineer on a 6 month contract for its energy facility in Cornwall.

The Technical Plant Engineer role comes with a daily rate up to £850.

Key skills required for the Technical Plant Engineer role

• Degree or higher qualification in engineering or management discipline
• Expertise with industrial boilers and pressure parts welding.
• Experience in power generation, or heavy process/engineering industries.
• Understanding and experience of environmental legislation and management systems.
• Project management experience
• Ideally a Chartered engineer or working towards Chartered status.

Location, day rate and timeframe of the Technical Plant Engineer role

• St Austell, Cornwall
• 6 month contract
• Daily rate up to £850.

Astute People are acting as an employment business in relation to this vacancy. We do not discriminate on the grounds of age, race, gender, disability, creed or sexual orientation and comply with all relevant UK legislation. We encourage applications from individuals from all backgrounds but candidates must be able to demonstrate their ability to work in the UK. Astute is also committed to the government’s Disability Confident Employer initiative. We endeavour to get back to everyone, however, if you have not heard anything after 7 days, please consider your application unsuccessful.

Microsoft 365 Engineer - Charity Organisation - York (Onsite Only)3-month initial contract | Inside IR35 | Up to £350 per day Your New CompanyYou will be joining a highly respected charity based in York, dedicated to delivering vital care and support services to the local community. As the organisation continues to expand its digital capability, they are seeking a Microsoft 365 Engineer to provide hands-on technical support and ensure smooth running of core IT services. This is an excellent opportunity to work for a purpose-driven organisation where your work will directly support staff and the patients they care for. This role is fully office-based in York.
Your New RoleAs the 365 Engineer, you will play an important part in the day-to-day delivery of IT services across the charity. You will act as a key point of contact for staff, supporting a wide range of technologies and helping drive effective use of Microsoft 365 across the organisation.Your responsibilities will include:

• Providing hands-on support and administration for Microsoft 365 (SharePoint, Teams, Exchange Online, Intune, etc.)
• Delivering high-quality end-user computing (EUC) support across devices, applications, and user environments
• Supporting basic network troubleshooting, connectivity issues, and on-site technical queries
• Working within ITSM processes such as incident, request, and change management
• Providing customer-facing support to both office and staff, including face-to-face assistance
• Offering technical guidance and helping users adopt best practice across IT systems
• Responding quickly to issues and demonstrating strong problem-solving and ‘think on your feet’ capability
• Collaborating with the wider IT team to improve processes and service delivery

What You’ll Need to SucceedTo be successful in this role, you should have:

• Minimum 12 months hands-on experience with Microsoft 365 administration
• Strong EUC support experience, covering devices, applications, and user environments
• Exposure to basic networking (switching, connectivity, troubleshooting)
• Familiarity with ITSM tools and processes
• Excellent communication and customer-facing skills
• The ability to work confidently on site and support clinical teams directly
• A fast-learning, proactive approach with the ability to work independently
• Public Sector, Charity, NHS or healthcare sector experience (highly beneficial but not essential)

What You’ll Get in Return

• The opportunity to work for a fantastic charity making a real difference to people’s lives
• A role where you’ll have visible impact, supporting staff delivering critical care
• 3-month initial contract
• £300 - £350 per day Inside IR35
• Supportive team environment and a genuinely rewarding place to work

What you need to do now

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV, or call us now.
If this job isn’t quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found at hays.co.uk

Commissioning Engineer / Technician – Substations & HV Infrastructure

Contract – The Northern region
Start: ASAP

We’re looking for an experienced Commissioning Engineer / Commissioning Technician to support HV substation and industrial power projects for a leading contractor. This is a contract role via our agency, working on the testing, commissioning and handover of high-voltage electrical systems.

Role Overview

You will carry out the planning, testing and commissioning of HV/LV equipment on substations and associated infrastructure. You’ll verify installation quality, complete functional testing, support energisation, and deliver all documentation to client standards.

Key Responsibilities

Commissioning & Testing

• Perform pre-energisation checks and verify installation quality.
• Test primary plant (transformers, switchgear, CT/VTs, breakers, cabling, earthing).
• Conduct secondary injection, protection testing, logic checks, SCADA/RTU/PLC I/O testing.
• Test UPS, battery systems, LVAC/DC systems and auxiliary equipment.
• Witness FAT/SAT and close out snags and punch lists.

Planning & Documentation

• Prepare commissioning plans, ITPs, RAMS and test sheets.
• Review drawings (SLDs, schematics, wiring diagrams) to define test scopes.
• Produce test packs, red-lines, as-commissioned records and handover documentation.

Energisation Support

• Carry out cold & hot commissioning.
• Support energisation and post-energisation checks.
• Work safely under Electrical Safety Rules, PTW systems and LOTO procedures.

Coordination

• Work closely with construction, protection, SCADA/telecoms teams and OEMs.
• Report progress and defects, ensuring all commissioning records are controlled and submitted.

Skills & Experience

• Proven HV/LV commissioning experience on substations or industrial power systems.
• Strong knowledge of transformers, GIS/AIS switchgear, protection relays, SCADA, UPS & DC systems.
• Ability to read, verify and mark-up SLDs, schematics and panel drawings.
• Competent with test equipment such as secondary/primary injection sets, insulation testers, relay test kits (Omicron/Doble), micro-ohm meters etc.
• Familiar with BS/IEC standards and HV electrical safety procedures.

Desirable Certifications

• ECS/CSCS
• 18th Edition (BS 7671)
• BESC / NG Person
• COMPEX/ATEX (if relevant)
• First Aid, MEWP/IPAF, Confined Spaces
• OEM-specific equipment training

What We’re Looking For

Reliable engineers with strong technical skills, a safety-first mindset, and the ability to work independently on live substation environments.

Apply Now

If you’re an experienced Commissioning Engineer or Technician available for contract work, send your CV and availability to

Our client, a prestigious company in the defence sector, is currently seeking a Systems IVV Consultant for a contract role. This opportunity targets proficient professionals who can play a pivotal role in delivering high-quality systems engineering solutions and managing complex projects.

Key Responsibilities:

• Represent the Systems discipline as a senior member, owning the assigned work packages and tasking to deliver obligations and commitments to agreed processes, plans, quality, schedule, and budget.
• Support the Systems Lead and Engineering Project Lead (EPL) in executing project engineering obligations within agreed plans, budget, and schedule.
• Develop technical solutions to large and complex engineering problems using Systems Engineering practices, principles, and processes to meet customer requirements.
• Quantify and implement technical and management processes to achieve desired solutions, delivering Systems Engineering IVV artefacts across the development lifecycle.
• Provide technical direction and influence across numerous project work packages, ensuring optimal approaches, architecture, design, and implementation choices.
• Collaborate closely with system, hardware, firmware, and software architects to ensure consistency, modularity, reuse, and technical excellence.
• Plan, coordinate, and present conclusive design reviews to senior management and customers, ensuring clarity and quality for successful events.
• Lead, manage, and report on Systems aspects of project work packages, balancing requirements, solutions, schedules, and costs.
• Manage customers and external suppliers to define and achieve expectations and objectives.
• Ensure and review technical/task proposals, providing accurate estimates for effort, costs, and risks for bids and proposals leading to contract awards.
• Work closely with other discipline leads, project management, and engineering project leads to create cost-effective and high-margin proposals.
• Review and sign off significant technical documents, supporting the technical review chair as needed.
• Manage information security as specified in the Security manual to comply with Government regulations.

Job Requirements:

• Experience in Systems Engineering, particularly within IVV (Integration, Verification, and Validation)
• Strong technical leadership and project management skills
• Proficiency in developing technical solutions for complex engineering problems
• Capability to influence various project work packages
• Excellent collaboration skills with system, hardware, firmware, and software architects
• Ability to plan and present thorough design reviews
• Understanding of managing customers and external supplier relationships
• Knowledge of creating, reviewing, and approving technical and task proposals
• Adherence to information security regulations and standards

If you have the relevant skills and experience in Systems Engineering IVV and are looking for a challenging contract role within the defence sector, we encourage you to apply now.

HD1 Hybrid (Office ideally Tuesdays)
30/03/2026 30/06/2026
£23.37 per hour

We are seeking an experienced Principal Engineer with strong Section 38 Highways adoption experience to join a busy Highways & Transportation team.

This role focuses on the negotiation, technical audit and approval of highway adoption schemes under Section 38 of the Highways Act, working closely with developers, consultants and internal teams to ensure designs meet adoptable standards.

The Role

You will:

• Technically audit Section 38 highway design submissions
• Review drainage, utilities and full highway layouts
• Provide structured feedback and manage iterative resubmissions
• Negotiate amendments with consultants and developers
• Manage live schemes from handover (retirement cover)
• Ensure compliance with legislative, regulatory and council standards
• Support procurement, financial and resource management where required
• Contribute to delivery during periods of changing priorities and resource pressure

You must be confident challenging non-compliant designs and capable of managing complex, ongoing schemes from day one.

What Were Looking For

Essential:

• Direct experience with Section 38 Agreements
• Strong highways design knowledge (adoptable standards)
• Civil Engineering degree (or equivalent experience)
• Experience within local authority or public sector highways
• Strong technical report writing skills
• Confident negotiator with consultants
• Experience managing staff performance and workloads
• Knowledge of CDM and Health & Safety legislation
• IT competence (MS Office, GIS, AutoCAD understanding)

Desirable:

• Planning process experience
• Experience working within politically sensitive environments
• Experience managing operational response (e.g. adverse weather)

The Person

You will be:

• Technically strong and decisive
• Honest and accountable
• Comfortable working in a fast-changing environment
• Capable of prioritising workload under pressure
• Able to motivate and support junior staff
• Flexible in approach to hybrid and occasional operational demands

Working Pattern

Hybrid ideally office-based Tuesdays (flexible for the right candidate).

Manager returning 16th March submissions to be reviewed that week.

AMS is a global workforce solutions partner committed to creating inclusive, dynamic, and future-ready workplaces. We help organisations adapt, grow, and thrive in an ever-evolving world by building, shaping, and optimising diverse talent strategies.

We partner with PwC to support their contingent recruitment processes. Acting as an extension of their recruitment teams, we connect them with skilled interim and temporary professionals, fostering workplaces where everyone can contribute and succeed.

PwC is a hugely diverse business, bound by our global purpose - to build trust in society and solve important problems. Our greatest opportunity to deliver our purpose is through meaningful work that makes a difference to our clients and society. We have a culture of high performance built on exceptional quality, ethical and professional standards. We lead by example. Our standards for quality - and care - are high. And together we surpass them. We believe we can make the biggest impact when leading with our purpose, values and PwC Professional behaviours in every interaction.

On behalf of PwC, we are looking for a ABAP Developer (SAP S/4 Hana) for a 6 Month contract based in Leeds (as and when required).

The Role & Responsibilities:

We are seeking an experienced SAP ABAP Developer to support S/4HANA development within a utilities environment focused on asset and pipeline management. The role involves delivering high-quality developments, supporting integrations across enterprise systems, and collaborating closely with design, testing, and business teams.

The successful candidate will participate in technical design discussions, system integration activities, testing cycles, and Agile delivery processes.

Key Responsibilities:

• Develop and enhance solutions in SAP S/4HANA using ABAP 7.4/7.5 standards.
• Apply modularization techniques (Function Modules, Classes, Methods).
• Build and maintain CDS Views and Data Dictionary objects.
• Develop enhancements including User Exits, BADIs, and Enhancement Framework.

Integration & Interfaces

• Develop and support interfaces using BAPIs and OData.
• Work across integrated environments including SAP, CRM, and Microsoft Dynamics.
• Support enterprise integrations leveraging Microsoft Azure middleware.
• Work with geo-spatial and asset data across multiple systems.

Testing & Delivery

• Participate in unit testing, system integration testing, and UAT.
• Investigate and resolve defects and performance issues.
• Provide ongoing support during deployment and post-release stabilization.

Agile Collaboration

• Attend SCRUM ceremonies and provide regular status updates.
• Collaborate with Design Leads on technical solutions and architecture decisions.
• Support continuous improvement within Agile delivery teams.

Key Accountabilities, Skills & Experience:

• Strong ABAP development experience (5-7 years).
• Experience within EAM/PM (notifications, work orders, asset management).
• CDS Views and Object-Oriented ABAP.
• ALV Classical and Interactive reporting.
• SAP Workflow development and troubleshooting.
• Performance tuning using SQL Trace and Runtime Analysis.
• Knowledge of SAP coding standards and optimization techniques.
• Understanding of enterprise integration patterns.

Desirable:

• Experience with Fiori/UI5.
• Experience in utilities or asset-intensive industries.

Next Steps:

If you are interested in applying for this position and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course.

AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business

We are recruiting for a Senior Electronic Engineer for a contract position based in Glasgow, hybrid working is available but 3 days per week are needed oniste.

This role covers all aspects of the product lifecycle, from requirements through specification, concept studies, design and development, integration, validation and qualification.

This role is worring on mixed signal electronics.

Key responsibilities of the role

• Undertake design of complex electronic circuit assemblies or architectures, from concept through to system integration & qualification
• Lead discussions with a multi-disciplinary team (systems, mechanical, software, safety, etc) to develop an optimum solution
• Work collaboratively with the project team to ensure products meet all their requirements and comply with regulatory safety and environmental standards
• Generate electronics specifications, architectures, and development or verification plan
• Support the bid process through generation of estimates and consultancy on electronic solution
• Present robust engineering solutions at design reviews
• Monitor progress of work against cost, schedule and performance

Key skills required

• Proven ability in electronic design throughout the design lifecycle
• Previous use of schematic capture packages (Cadence, Mentor Graphics or similar)
• Development of electronic products in a formal environment
• Testing at circuit board and system level (eg. board bring-up and debug, EMC)
• Preparation of sub-system requirements/procurement specs
• General understanding of engineering process and design lifecycles
• Mixed signal electronics design,
• Knowledge of Power, signal conditioning, video/camera interfaces, optronics,

Additional

We seek an Electronics Engineer who has worked in a military / defence environment / industry within the last 12 months or who is capable of obtaining security clearance (SC level minimum)

BAE Systems
Location: Prestwick
Salary: £35 PAYE or £47.12 Umbrella
Working Arrangements: 2-3 days on site per week (could change depending on demand)
Duration: 12 months
Hours: 37 hours per week (Monday–Friday)

The Opportunity

• Would you like to play a key role in the design and development of one of the world’s most advanced air platforms? BAE Systems currently have an exciting opportunity for an Electrical Design Engineer to join the Airframe Design Team supporting the F-35 Lightning II Programme.
• As an Electrical Design Engineer, you will contribute to the design and integration of electrical systems across the F-35 Aft Fuselage, ensuring that the final air vehicle meets safety, reliability, and maintainability requirements. You’ll be part of a collaborative and innovative engineering environment, working alongside multidisciplinary teams to deliver a certifiable, world-class product.
• This is an excellent opportunity to develop your design capabilities in a model-based engineering environment using industry-leading tools such as CATIA V5 and TeamCenter PDM.

Your Skills and Experience
Essential:

• Experience in electrical design using CATIA V5 and its Electrical Workbench.
• Proven ability to work in a model-based design environment.
• Strong understanding of design processes across multiple product lifecycle stages.

Desirable:

• Experience in aerospace or a highly regulated engineering environment.
• Familiarity with TeamCenter PDM or similar configuration management systems.

-------> As a Software Testing & Issue Triaging Engineer, youll be preparing vehicles for testing, planning and executing test activities, and analyzing data to ensure features perform as intended. Youll be hands-on with cutting-edge technology, from functional testing and software validation to exploring real-world scenarios on public roads and proving grounds. This is a hands-on, high-impact role where youll work across embedded systems, vehicle platforms, and global teams to bring new features to life. From debugging in real vehicles to collaborating with architects and engineers across the business, youll play a key role in delivering safe, intelligent, and seamless driving experiences.

Your responsibilities:

Generate test cases for the features being validated

Prepare vehicles and ensure they are ready for all planned test activities

Execute test plans in line with defined methods and processes

Carry out defect validation and ensure accurate reporting

Record test results, update defect logs, and upload data promptly

Manage test equipment procurement and create suitable test environments

Collaborate closely with validation teams

Support cross-functional teams by investigating software issues and providing expert-level technical insight

Your Profile

Essential skills/knowledge/experience:

Bachelors or masters degree in computer science, or related field

Technical expertise in test facility and vehicle preparation

Proven experience validating driver assistance features at vehicle level (ADAS experience highly desirable)

Certification and experience conducting tests on proving grounds

Proficiency with data acquisition tools (e.g., CANape, CANalyzer, INCA, Simulink, ADTF)

Strong ability to analyze and report test data accurately

Skilled in diagnostic fault-finding and interpreting engineering documents, with a structured problem-solving approach

Full UK (or EU equivalent) driving license with a clean record

Excellent problem-solving skills and attention to detail

Ability to lead and work effectively with cross-functional teams

Strong communication and leadership skills

Vulnerability Management Engineer (IT/OT Environments)

6 months initial

Worcestershire Site based (hybrid)

About the Role:
Were looking for a skilled Vulnerability Management Engineer to play a key role in strengthening vulnerability management across IT and OT environments. Youll be responsible for operationalising risk-based vulnerability processes, improving visibility of exposure across sites, and embedding automated, standards-aligned reporting into day-to-day operations. This is a hands-on role that works closely with site teams, security stakeholders, and operations to reduce risk in complex, distributed environments.

What Youll Do:
Operationalise vulnerability management using a risk-based prioritisation approach.
Develop and maintain OT site DMZ vulnerability dashboards aligned with NIST frameworks.
Identify sites operating flat network architectures and assess associated risks.
Conduct site engagement activities, including on-site visits where required, to validate network and vulnerability findings.
Enhance operational metrics, reporting, and overall risk visibility across IT and OT estates.
Automate vulnerability management processes and integrate outputs with orchestration tools and SIEM platforms.

Your Approach:
Assess existing vulnerability management processes and identify gaps in coverage, prioritisation, and reporting.
Apply risk context to vulnerability data to support meaningful remediation decisions.
Design and deliver dashboards that provide clear, actionable insight for operational and security stakeholders.
Work with site and central teams to improve network segmentation and reduce exposure caused by flat networks.
Drive automation initiatives to streamline vulnerability detection, reporting, and response workflows.
Maintain accurate documentation of vulnerability processes, metrics, and improvement actions.

About You:
Proven experience in vulnerability management, cyber security engineering, or related disciplines.
Strong understanding of vulnerability scanning, risk-based prioritisation, and remediation workflows.
Knowledge of IT and OT environments, including DMZ architectures and segmentation principles.
Familiarity with security frameworks such as NIST and their application in operational environments.
Experience integrating vulnerability tools with SIEM and orchestration platforms.
Strong communication skills, with the ability to translate technical risk into operational insight.
Willingness to engage with sites directly, including on-site assessments where required.
Experience in OT environments is highly advantageous, though not essential.

Based - Worksop, S81 7AY

2 Year Fixed Term Contract (until March 2028)

Salary - £48,000 per annum

We’re looking for a hands-onProject Engineer to support the delivery of Project Venice - a key initiative shaping the future of our cooking sauces manufacturing. You’ll help plan, coordinate and implement engineering projects that improve safety, efficiency and operational performance within a fast-paced FMCG environment.

What you’ll be doing:

• Support project planning, scheduling and reporting
• Assist in the preparation of installation and commissioning plans
• Coordinate contractors, suppliers and engineering teams
• Assist with technical reviews, documentation and change control
• Carry out PUWER checks, risk assessments and ensure compliance
• Support installation, commissioning and equipment performance assessments
• Maintain safe working practices and contribute to incident reporting

What we need from you:

• Experience supporting or managing engineering projects in FMCG or food manufacturing
• Strong planning, budgeting and technical documentation skills
• Comfortable working with contractors and cross-functional teams
• Familiar with project tools such as MS Project or Primavera
• Safety-focused with strong problem-solving skills

What we offer in return:

• Salary of £48,000
• Pension scheme of up to 7.5%
• Life assurance
• Holiday purchase scheme
• Sharesave scheme
• Employee discount platform

At Premier foods we believe in inclusion, authenticity and individuality. We aim to ensure all existing and future colleagues are given equitable opportunities and are respected, valued and encouraged to bring their true authentic selves to work no matter who they are, what they look like, who they love or what they believe in. Our culture is one where everyone is welcome.

We’re proud to be a Disability Smart employer and are committed to supporting disability inclusion throughout our recruitment process. If you experience any access issues or require reasonable adjustments at any stage, please let us know so we can ensure you have the support you need.

Evodia Limited is seeking an SC cleared Engineer to join our client’s Specialist Vehicles and Uncrewed Land Systems (SVULS) Team based in Bristol as a Safety Engineer. This is a fantastic opportunity for professionals with some experience of providing technical advice and delivery of successful engineering outcomesand a background in military vehicles or uncrewed land systems, looking to contribute to vital defence projects in a collaborative and supportive environment.

Role Overview:

As a Safety Engineer within the SVULS team, you will play a crucial role in supporting the delivery of acquisition safety policies and solutions. Your expertise will guide through-life management of safety risk across projects, ensuring the safety, security, and interoperability of advanced systems for Front Line Commands.

Location & Working Arrangements:

• Based in Bristol with flexibility for hybrid working (2-3 days onsite per week)
• Start date: ASAP, with contract until 30 June 2026, potential to extend
• Day Rate:Up to £420 per day (inside IR35)
• Security Clearance:Minimum SC clearance required

Key Responsibilities:

• Generate and review safety requirements and documentation for sub-systems, considering in-service support and costs
• Collate and evaluate technical safety data to support project maturity and success
• Ensure compliance with relevant safety legislation, policies, and standards, particularly in regulated environments
• Contribute to technical risk management activities and safety case development
• Collaborate with multidisciplinary teams to establish and maintain safety artefacts
• Support testing, verification, validation, and safety evaluation activities
• Assist in through-life safety decisions, modifications, and disposal activities
• Draft technical recommendations aligned with safety disciplines

Ideal Candidate Profile:

• Science, Technology, Engineering, or Mathematics qualification at RQF Level 3(A-Level or equivalent and above)
• Experience providing technical advice and securing successful engineering outcomes
• Working towards Professional Registration such as EngTech or RSciTech is desirable
• Prior experience with military vehicles or uncrewed land systems is advantageous but not essential

If you are ready to support innovative projects in a role designed to make a genuine impact, we encourage you to get in touch. Evodia Limited acts as an employment business for this vacancy.

Position: Interop Engineer Test completion and analysis-engineer
Location: Gaydon, UK (On-Site)
6 months contract position

The Role

This role sits within the Powertrain Charging Systems team, in the Charging Validation & Verification organizational unit. The role will focus on delivering data from tests in support of design release activity or technology advancement of electric vehicle charging infrastructure compatibility.

The main activity for this role is to, as part of a team, prepare test facility or test parts with instrumentation which enables measurement of a wide range of charging system signals and variables, both on-board and external to the vehicle. In addition, this role willsupport the collection of data in a wide range of environments such as in a test facility, on public roads and proving grounds.

The key outcome of this role is to help create a modern luxury seamless & stress-free charging experience for our customers

Your responsibilities:

• Identify and trace Charge Point Operators (CPOs).
• Manage and update test vehicles with required hardware (HW) and software (SW) configurations for lab / road drive testing.
• Develop detailed route maps to create comprehensive drive plans for interoperability testing.
• Coordinate across multiple teams for test vehicle bookings/availability for drive test.
• Ensure availability and alignment with cross-functional teams for smooth execution of test activities.
• Conduct lab-based interoperability testing in line with industry standards and protocols. & Ensure compliance with ISO 15118, DIN 70121, IEC 61851, and OCPP specifications.
• Identify compatibility issues between test vehicle and charging stations, using data visualization tools (i.e. Tableau, JIRA, Xray) during road drive testing.
• After identifying the number one compatibility issue, start and be a key part of the problem-solving process with the support of the Electric Vehicle Charging Infrastructure Test Engineer(s);
• Following the successful issue resolution, contribute to the teams FMA tracker (Failure Mode Avoidance) is up to date and contains at least one test case to prevent recurrence (the team will run the generated test case(s) on its charging station emulator for all future vehicles);
• Build knowledge around Charging Stations OEM (Original Equipment Manufacturer) and how they are developing their products.
• Work towards improving our future electric vehicles at a software and electronics level.
• Support preparation of test facility and/or test parts to enable effective and timely data delivery.
• Offer technical advice and guidance on collection and measurement of data. To collate, manipulate and interpret data which will be used to inform engineering resolutions
• Execute commissioning and acceptance testing of measurement equipment
• Carry out data quality and performance reporting for measurement equipment and capability
• To conduct studies regarding fault rectification to ensure minimum down-time
• To support continuous improvement activity with the goal of improving test efficiency and/or product quality
• To support all activities that result in a positive outcome from any audit, e.g. TS16949, OHSAS18001, ISO 14001
• Undertake any other work as directed by their line manager in connection with their job as may be requested

Key Interactions

EVSE (Electric Vehicle Supply Equipment) Suppliers

Vehicle Engineering

Charging system, software & hardware teams

Quality colleagues

Your Profile

Essential skills/knowledge/experience:

Good communication and negotiation skills

Strong organizational and planning skills

Eagerness to learn about Electric Vehicle Charging

Studying data and reporting test data.

Natural problem-solver with structured approach to problem solving in a technical environment.

The ability to validate, prepare and read documentation.

Knowledge of Health and Safety processes

Computer literate, including Microsoft Office competency to produce plans, presentations, graphs, process and Single Point Lesson (SPL) documents.

UK Class 2 & Class 3 Driving permit mandatory.

UK driving license with less than 6 penalty points, no disqualification, 2 years accident-free record.

Desirable skills/knowledge/experience:

Demonstrable software integration knowledge

Vehicle charging Systems and applications experience.

Demonstrable electronic hardware design & test knowledge

Awareness of existing charging Standards (e.g. CCS / COMBO, DIN 70121 and ISO15118)

Six Sigma, Black Belt and Green Belt Training and certification.

Experience with IATF16949 or ISO9001 standards and requirements

Experience and certification for conducting testing on proving grounds.

Knowledge of instrument calibration processes.

Proficient in the use and application of a programming / scripting language (C/C++, python, Java, or similar)

Educated to Degree level in a Systems, Mechanical, Electrical/Electronic or related field or equivalent.

Location: Yeovil, Somerset, South West England

Job Type: Contract, Full-Time Hours

Primary Industry: Aerospace and Aviation

Secondary Industry: Military and Defence

JOB DESCRIPTION

JOB PURPOSE
To provide an Mechanical Metrology Calibration, validation, inspection and testing service supporting Transmission

KEY JOB ACCOUNTABILITIES

· Calibration of Mechanical test and measuring equipment, selecting the appropriate test standards considering accuracies required. Calibration of equipment across all ranges and functions and including the calibration of pressure indicating instruments and testing and verification of crimping tools. Tasks conducted within the laboratory and across site.
· o review and assess the technical specifications of Mechanical test equipment to assist supervision in transmission.

· To support the offload of test & measuring equipment to suppliers for calibration, including dispatching & receipting.

· To review and assess the technical specifications of Mechanical test equipment to assist with supplier calibration.

· Carrying out the BER & NCS processes for Mechanical test & measuring equipment returning from supplier calibration.

ESSENTIAL KNOWLEDGE, SKILLS & EXPERIENCE

• Educated to HNC or equivalent in Mechanical Engineering and to hold a recognised engineering apprenticeship.
• 3 years minimum experience in Mechanical Engineering working to a high tolerance
• To have knowledge of computer data systems, word processing and keyboard skills.
• Experience and knowledge of a calibration / inspection environment in Mechanical disciplines.
• Self-motivated and able to work on their own and also as part of an integrated team.
• A high level of interpersonal skills to enable good communication with internal and external Customers at all levels

Please apply or get in contact on 01935403203 /

SQL Server DBA (SC Cleared)

London (Hybrid)

6 Month Contract

to £350/day-£400/day (Inside IR35)

SQL Server DBA needed with active SC Security Clearance, SQL Server databases.

6 Month Contract based in Central London (Hybrid). Start ASAP in March 2026.

Hybrid Working - 2 days/week remote (WFH), and 3 days/week working on-site from the London office.

A chance to work with a leading global IT and Digital transformation business specialising in Government projects:

• Experienced SQL Server DBA or similar role, Performance Tuning and Optimization (PTO)
• Must have in-depth experienced, Manage SQL Server databases, Configure and maintain database servers and processes, Backups, restores and recovery models.
• High Availability (HA) and Disaster Recovery (DR) options for SQL Server and experience with Windows server, including Active Directory
• Monitor system’s health and performance, including ensure high levels of performance, availability, sustainability and security
• Analyze, solve, and correct issues in real time and Refine and automate regular processes, track issues, and document changes
• Assist developers with query tuning and schema refinement
• Provide 24×7 support for critical production systems
• Perform scheduled maintenance and support release deployment activities after hours
• MCTS, MCITP, and/or MVP certifications a plus
• Banking / Financial Services domain experience preferred.
• Must hold active SC Security Clearance used on a project within the past 12 Months.

Role: Oracle DBA with Active SC ClearanceType: Contract (12 Months)
Location: Leeds, UK
Current Active SC Clearance needed.Payrate: 600 - 700 GBP/day on Inside IR35 on Umbrella

Are you an Oracle Database SME looking for your next long-term contract?

We are urgently seeking a highly experienced Oracle DBA for a 12-month engagement with PIN Communications. In this standalone, mission-critical role, you will be the ultimate technical authority for a high-availability database estate.

?? Must-Have: You MUST hold a Current and Active SC Clearance to be considered.

The Role:

• Act as the go-to technical expert for Oracle Database 12c, taking full ownership of stability, security, and performance.
• Diagnose and resolve complex performance issues on high-volume transactional workloads (using AWR/ASH, SQL tuning, and execution plan reviews).
• Design, test, and manage robust RMAN backup and recovery strategies.
• Lead database patching (PSU/CPU), upgrades, and hardening on Linux (Oracle Linux/RHEL).
• Partner with Dev and QA teams to advise on schema design, query patterns, and operational impact.

Your Experience:

• Active SC Clearance (Non-negotiable).
• Extensive hands-on experience as a DBA in high-availability Oracle 12c environments.
• Deep technical expertise in RMAN, AWR/ASH, and SQL optimization.
• Strong operational background on Linux platforms (understanding I/O, memory, and ASM impacts).

This is an urgent vacancy with a deadline where the hiring manager is shortlisting for an interview immediately. Please apply with a copy of your CV or send it praveen. sukkala2 @ randstaddigital. Com

Randstad Technologies is acting as an Employment Business in relation to this vacancy.

Infrastructure Architect (Defence)
6 Month Initial Contract (Rolling)
Active SC Clearance Required

My client is a high-tech defence organisation based in Bristol. We are seeking an experienced Infrastructure Architect to support secure, high-assurance programmes.

The Role

This is a hands-on Infrastructure/ Technical Architecture position focused on the design of secure on-premise and cloud-based environments within a defence setting.

You will play a key role in shaping and governing infrastructure solutions across secure infrastructure, ensuring compliance with defence standards and security frameworks.

Essential Experience

• Proven experience within MoD or Defence environments
• Some awareness of JSP 440
• Awareness of Secure by Design (SbD) principles
• Strong IT Infrastructure & Network background (infrastructure led focus)

Technical Experience

Demonstrable experience across:

• Enterprise storage solutions
• Secure networking environments
• Cloud platforms (preferably Microsoft / Azure)
• Endpoint configuration & deployment
• On-premise and cloud-based infrastructure design

Candidate Requirements

• Active SC Clearance (essential – no sponsorship available)
• Sole British National
• Available to work 4 days per week onsite in Bristol

This is an excellent opportunity to join a cutting-edge defence programme, working on secure, mission-critical infrastructure within a highly technical team.

If you meet the clearance and experience requirements and are available for contract work, we will welcome your application.

Our client is currently looking to recruit a Systems Implementations Specialist on an initial 4 month contract, working remotely.

Systems Implementation Specialist Revenues & Benefits (NEC EDM & Revs & Bens)
4 months - Home based
£400 per day inside IR35

We are seeking an experienced Systems Implementation Specialist to support a focused programme of project work within our Revenues and Benefits service.
This role will play a critical part in the implementation of new NEC modules, ensuring effective configuration, testing and deployment to support operational efficiency and service delivery.
The Role
You will lead on the implementation of new modules within the NEC Enterprise Document Management (EDM) system (formerly and the NEC Revenues & Benefits application, with particular responsibility for back-end system administration and configuration.
Modules to be implemented include:

• Data Integration Hub
• Email Connect
• Document Bundling

You will take ownership of the full implementation lifecycle from planning and scoping through to configuration, testing and go-live support.
Key Responsibilities

• Lead the planning and scoping of module implementation work
• Liaise closely with Revenues and Benefits business users to gather requirements
• Configure and administer back-end system parameters within NEC EDM and Revs & Bens
• Manage system integration considerations and data flows
• Develop and execute comprehensive test plans
• Coordinate and undertake system testing (unit, system and user acceptance testing)
• Troubleshoot and resolve configuration or integration issues
• Support documentation, knowledge transfer and handover to operational teams
• Ensure delivery to agreed timescales and project milestones

About You
To be successful in this role, you must demonstrate:

• Extensive knowledge of NEC Enterprise Document Management (EDM) (formerly
• Strong expertise in NEC Revenues & Benefits applications, particularly back-end administration
• Proven experience implementing NEC modules, including Data Integration Hub, Email Connect and Document Bundling
• Experience leading module implementations from planning through to go-live
• Strong stakeholder engagement skills and the ability to translate business requirements into system configuration
• Experience managing and undertaking structured testing processes
• A methodical, organised and solution-focused approach

This is an excellent opportunity for a technically skilled NEC specialist to make a tangible impact within a busy Revenues and Benefits environment.