Location: Site based office attendance minimum 3 days per week AND 2 days remote working
Status: Contract - INSIDE IR35
Duration: Approved until 31dec26 (renewable)
Reports to: Transverse Discipline Lead within the Integrated Transverse Team

Morson Edge are working on behalf of a major player within the Energy Sector who have a current requirement for an experienced Coating Engineer to join their established, site-based, Transverse Engineering Team in Bridgwater, Somerset. This is a (renewable) contract position - inside IR35 - HYBRID.

The successful candidate will comprise part of a wider, multi-national Joint Design Office team responsible for supporting Review and Acceptance of design activities of a classified plant. This dynamic and multi-disciplinary design team undertake the important intelligent customer role on behalf of the Project.

The Joint Design Office (JDO) has been created to reinforce site-based engineering to quickly respond to engineering queries/problems coming from site construction to deliver the schedule and to deliver an increased scope of work. By being located close to the construction works the JDO team are able to quickly react and provide technical solutions/answers - thereby crucially assisting construction teams swiftly and efficiently.

Overview

• The post-holder will be a Coating Engineer, Coating Chemist, Chemical Engineer or Materials Engineer, contributing to the technical assessment of engineering queries raised by the site Contractor on the M&E coating scope across the CI/BOP and Nuclear Island buildings.
• The role will consist of both client and responsible designer activities.
• The role will be focused upon coating queries, non-conformances and coating optimisation - coordinating and leading the technical response for the client.
• The role will interface with other disciplines and with several parties, such as the site Contractors (composed of main suppliers and sub-suppliers), Construction teams, Quality teams, Project Management teams, or Design teams (embedded within the JDO organisation on site, or in back office).

Key Responsibilities

• Responding to General Queries, Non-Conformances, Change Request, and Exemption Requests originating from the MEH Contractor on site, with the support of the Responsible Designer or site Experts when needed.
• Provide adequate oversight to ensure the Nuclear Safety and Environmental Regulation requirements are met.
• Support the integrated team with technical assessment of contractor queries
• Carry out nuclear safety and environmental assessment (categorisation) of queries
• Challenge design decisions so that engineering and design aligns with the project strategy.
• Assist in co-ordinating support from other external organisations.
• Contribute to the resolution and closure of Open Points.
• Assess technical risk and subsequently address this risk.
• Maintain a strong relationship with EPR Engineering (Responsible Designer)

The Skills

• Typically degree or equivalent in a relevant engineering discipline or experience in coating industry
• Experience applying multi-disciplinary technical knowledge within the nuclear industry.
• Knowledge of the construction / installation industry.
• Knowledge of Health & Safety legislation including CDM and Nuclear Site License requirements.
• Ability to influence a diverse range of stakeholders, particularly those in a site environment.
• Ability to work independently, be pro-active, report on and escalate relevant issues.

Apprentice Engineer, Arla Lockerbie DG11 2RE

(This is a 4-year apprentice scheme)

Are you ready to earn while you learn and become a multiskilled engineer at a cutting-edge dairy site?

Across four years, youll combine hands-on experience with classroom learning, keeping our technology running and helping deliver household-favourite products, while building a career-defining skill set.

How You Will Make an Impact

Embark on a four-year engineering apprenticeship at ArlasLockerbiesite, working alongside a team of skilled engineers to maintain, repair and install machinery that powers our production. When issues arise, youll be the problem-solver who keeps lines running and our products flowing, from Cravendale milk to Skyr yoghurt and Anchor butter. Your learning is delivered in structured blocks with*East Kilbride & District Group Training Association (EKTGA),*blending practical and classroom training.

• Carry out maintenance, repairs and installations across automated production equipment
• Support root-cause problem solving and continuous improvement to reduce downtime
• Apply safety-first practices while developing hands-on technical capability
• Build knowledge across processing, packaging and utilities systems
• Progress through structured college blocks and on-site training to achieve qualifications

What Will Make You Successful

Youre 18 or overby September 2026and ready for a hands-on role, bringing a solid educational foundation with at least five GCSEs at grades 94 (A*C), including Maths and English (or the Scottish equivalent). Youre motivated to learn whether thats picking up new skills on the job or sharpening your knowledge in the classroom.

A curious problem-solver at heart, you love figuring out how things work and fixing issues fast. Youre safety-conscious, a clear communicator, and a true team player who collaborates well. Organised and resilient, you can balance structured learning blocks with on-site responsibilities. When you apply, please list your qualifications clearly and include scanned copies of your certificates.

What Do We Offer?

Salary progression:
Year 1: £21,000 per annum
Year 2: £25,484.71 per annum Year 3: £26,500 per annum
Year 4: £27,500 per annum

Youll enjoy a comprehensive rewards package, including 26 days holiday plus bank holidays, a pension with matched contributions up to 6%, and life assurance at four times your annual salary. Youll have access to discounted products through our Staff Shop, and were committed to your training and development. Our flexible benefits let you buy up to five additional days of annual leave and unlock retailer discounts via the My Benefits platform. During study blocks with our education partners accommodation and expenses for food and travel are provided.

Programme structure and qualifications:
Year 1: 19 weeks at college
Year 2: 10 weeks at college Year 3: 15 weeks at college
Year 4: Fully based at site
Qualifications: OAL Level 3 in Food & Drink Engineering Maintenance; Level 3 Health & Safety Award; 18th Edition Wiring Regulations Certificate

Would You Like to Join Us?

If this position is of interest, please apply directly via our careers page with your CV and your proof of GCSE certificates. Applications will close6th April 2026
Any questions at all please reach out to Oliver Hickson-Burr -Talent Partner

Recruitment process:

• CV shortlisting
• If successful at Shortlisting - HireVue video interview
• Group interview (Teams):18th or 19th of May 2026
  This stage includes a competency-based interview and a group assessment.
• Final interview: Held at your preferred site and includes a dexterity task and meeting the team.

Shape the Future of Dairy

Arla is a global leader in the dairy industry, committed to enabling good food choices that make life better, providing people with natural, sustainable nourishment, while taking care at every step to ensure Arla is a choice they can feel good about. If you are looking to shape the future with an ambitious global cooperative that truly cares about your growth, where everyone feels valued and empowered, and collaboration is the core of culture, Arla is a choice you can feel good about.

Are you ready to earn while you learn and become a multiskilled engineer at a cutting-edge dairy site?

Across four years, youll combine hands-on experience with classroom learning, keeping our technology running and helping deliver household-favourite products, while building a career-defining skill set.

How You Will Make an Impact

Embark on a four-year engineering apprenticeship at Arlas Westburysite, working alongside a team of skilled engineers to maintain, repair and install machinery that powers our production. When issues arise, youll be the problem-solver who keeps lines running and our products flowing, from Cravendale milk to Skyr yoghurt and Anchor butter. Your learning is delivered in structured blocks with*Calderdale Collage,*blending practical and classroom training.

• Carry out maintenance, repairs and installations across automated production equipment
• Support root-cause problem solving and continuous improvement to reduce downtime
• Apply safety-first practices while developing hands-on technical capability
• Build knowledge across processing, packaging and utilities systems
• Progress through structured college blocks and on-site training to achieve qualifications

What Will Make You Successful

Youre 18 or overby September 2026and ready for a hands-on role, bringing a solid educational foundation with at least five GCSEs at grades 94 (A*C), including Maths and English (or the Scottish equivalent). Youre motivated to learn whether thats picking up new skills on the job or sharpening your knowledge in the classroom.

A curious problem-solver at heart, you love figuring out how things work and fixing issues fast. Youre safety-conscious, a clear communicator, and a true team player who collaborates well. Organised and resilient, you can balance structured learning blocks with on-site responsibilities. When you apply, please list your qualifications clearly and include scanned copies of your certificates.

What Do We Offer?

Salary progression:

Year 1: £21,000 per annum

Year 2: £25,484.71 per annum

Year 3: £26,500 per annum

Year 4: £27,500 per annum

Youll enjoy a comprehensive rewards package, including 26 days holiday plus bank holidays, a pension with matched contributions up to 6%, and life assurance at four times your annual salary. Youll have access to discounted products through our Staff Shop, and were committed to your training and development. Our flexible benefits let you buy up to five additional days of annual leave and unlock retailer discounts via the My Benefits platform. During study blocks with our education partners accommodation and expenses for food and travel are provided.

Programme structure and qualifications:

Year 1: 19 weeks at college

Year 2: 10 weeks at college

Year 3: 15 weeks at college

Year 4: Fully based at site

Qualifications: OAL Level 3 in Food & Drink Engineering Maintenance; Level 3 Health & Safety Award; 18th Edition Wiring Regulations Certificate

Would You Like to Join Us?

If this position is of interest, please apply directly via our careers page with your CV and your proof of GCSE certificates. Applications will close6th April 2026

Any questions at all please reach out to Oliver Hickson-Burr -Talent Partner

Recruitment process:

• CV shortlisting
• If successful - HireVue video interview
• Group interview (Teams):18th or 19th of May 2026
• This stage includes a competency-based interview and a group assessment.
• Final interview: Held at your preferred site and includes a dexterity task and meeting the team.

Shape the Future of Dairy

Arla is a global leader in the dairy industry, committed to enabling good food choices that make life better, providing people with natural, sustainable nourishment, while taking care at every step to ensure Arla is a choice they can feel good about. If you are looking to shape the future with an ambitious global cooperative that truly cares about your growth, where everyone feels valued and empowered, and collaboration is the core of culture, Arla is a choice you can feel good about.

Ref.: 106213

Initial 12-month contract
up to £75ph, UMB, inside IR35
Stevenage (onsite)

Please note this role requires SC level Security Clearance.

The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink core team, Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system

Responsibilities:
The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions of MBDA, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems.

Skillset/experience required:
Individuals will be able to demonstrate a significant number of the following attributes:
* Proven relevant RF electronics design experience (likely to be the design of 3 or 4 complex RF electronic items using the latest technologies), preferably for harsh environments (EMC, Vibration, thermal).
* Can guide the design implementation of RF Electronics Receiver / Transmit amplifier chains, filters and frequency synthesisers over the 30Mhz to 30GHz range. Software Defined Radios of good advantage.
* Knowledge and proven best practice design of power supplies and digital interfaces for use in a RF product.
* Proven ability to manage the development and delivery of RF electronic equipment including associated technologies through all stages of the development process
* Ideally degree qualified
* Planning and organisation skills with a record of delivering to time and cost
* Strong negotiating and influencing skills;
* Self-starter with drive, energy and enthusiasm and a clear focus on delivery and results.

Job title: AP/Electrical Testing & Inspection EngineerSalary: £28 Per HourLocation: Cardiff

About us

DL M&E Building Services Ltd undertakes work throughout the U.K. and has experienced continuous growth in the installation of mechanical and electrical services within the commercial building services engineering sector, with a client base which includes some of the U.K.s biggest names in the banking, leisure, commercial and transport industries.

The Opportunity

We are currently looking for an experienced Electrical Testing & Inspection Engineer, ideally with Electrical Authorised Person (AP) experience, to join our team.

We currently have an office refurbishment project in Cardiff starting in March, running for approximately 6 months. Following this, we can provide ample opportunity for consistent work and career progression, with involvement in further projects.

If you’re a reliable and experienced Engineer, we can offer extended work across multiple projects, with the potential for long-term contracts. Plus, there is plenty of overtime available to increase your earning potential.

Electrical Testing & Inspection Engineer Main Duties and Requirements

The main duties and requirements of the role include:

Carrying out high-quality electrical testing, inspection, and certification on commercial installations

Acting as an Electrical Authorised Person (AP) where required, managing isolations, permits, and safe systems of work

City & Guilds Inspection and Testing 2391 / 2392

City & Guilds 2382-18 18th Edition Wiring Regulations (Amendment 3)

ECS Gold Card

Proven experience inspecting commercial electrical installations

Excellent written and report presentation skills

A demonstrable history of completing electrical inspections to a high standard

Relevant, demonstrable experience in an Electrical AP role

How to apply

To apply for the role of Electrical Testing & Inspection Engineer, forward your CV via Totaljobs or visit our website.

I require a BMS Design Engineer to work on a long term project for the next 2 4 years on a contract basis.

Hybrid role (Based 100% at home) + Paying £450 500 a shift + Outside IR35 + Weekly payments

The role: As the BMS Project Engineer or BMS Design Engineer you will work on the design and technical responsibility on projects based in the UK.

You will have extensive knowledge of the BMS industry understanding all design and technical requirements on a project.

You will need to communicate professionally and confidently with all members of the project team as well as building strong working relationships with clients.

Key skills required: Previous experience as a BMS Project Engineer or BMS Design Engineer similar and fantastic technical knowledge of the BMS Industry.

Based 100% at home + Paying £450 500 a shift + Outside IR35 + Weekly payments

For more information on this fantastic opportunity, send your CV or call Simon Bedlow on the numbers provided.

Keywords BMS // Design // Hybrid // BMS Controls

We are seeking an experienced High Voltage (HV) Engineer with strong technical expertise in primary equipment to support the engineering, installation, testing, and commissioning of onshore substation assets. The ideal candidate will have a solid background in high-voltage systems (33 kV400 kV).

• Initial 12 month contract
• Outside IR35
• Working for a leading EPC

Key Responsibilities

• Specify, review, and oversee installation of primary HV equipment: transformers, GIS/AIS switchgear, circuit breakers, disconnectors, instrument transformers, surge arresters, earthing systems.
• Review vendor drawings, FAT/SAT documentation, and ensure compliance with UK/IEC standards.
• Support construction, installation, and pre-energisation checks, including site inspections and quality verification.
• Assist with technical calculations (fault levels, earthing, insulation coordination).
• Coordinate with civil, protection, SCADA, and EPC contractors.
• Ensure all work meets HSE and electrical safety requirements.

Experience & Qualifications

• Degree in Electrical Engineering or similar.
• Proven experience on onshore HV substations (33400 kV).
• Strong understanding of primary equipment, AIS/GIS layouts, and HV installation practices.
• Ability to interpret SLDs, layouts, and technical drawings.
• Knowledge of UK regulatory and utility standards.

Electrical Maintenance Engineer – Manufacturing

Based in Bradford – 1 week contract (possible Extension)

Day Shifts Monday to Friday – 8am to 4pm (Overtime if available)

Outside IR35 £30ph

The business is now looking for an Maintenance Engineer (Elec Biased) to support the internal team and to ensure downtime is to a minimum by supporting the complete service overhaul of conveyor systems on site. If you are looking for a new contract, then please contact Adil Shaikh on or email

The day-to-day responsibilities of the Electrical Maintenance Engineer will involve the following.

• Reactive maintenance will include fault finding and replacing components on a variety of Conveyor Systems
• Preventative maintenance
• Electrical responsibilities will include fault finding on PLCs and a variety of electrical components such as sensors, relays, proximities, control panels, single phase, three phase,
• Mechanical responsibilities will include fault finding and replacing a variety of mechanical components such as rollers, chains, bearings, sprockets, gearboxes

The Maintenance Engineer must possess the following skills and experience.

• Previous Electrical experience within an automation environment – this could be Manufacturing, or FMCG.
• Electrical Qualification Required
• Able to fault find and repair a wide range electrical and mechanical components
• Experience with working PLCs

The benefits of this Maintenance Engineer contract are the following.

• Minimum of 40 hours per week available
• Day Shifts 8am to 4pm (Overtime could be available)
• Outside IR35
• Start Date is from 23rd of February

To be considered for this role please either hit the ‘Apply’ button on this site or email your CV directly to I can also be contacted directly on. I look forward to hearing from you!

ATA Recruitment specialise in the recruitment of Engineers across the UK, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! -

You must be eligible to live and work within the UK. Sponsorship is not provided.

ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Our client, a globally recognised luxury automotive manufacturer, is seeking an Automotive Electrical Integration Engineer to join their Electrical Engineering division in Crewe. This contract role sits within the Test & Build Support function and plays a key part in the development of next-generation electrified vehicles.

This is an exciting opportunity to work at the forefront of automotive innovation, supporting prototype, pre-series, and series production phases while ensuring high-quality integration of electrical and electronic systems.

Key Responsibilities

You will support two core workstreams: integration testing and build support. Your responsibilities will include:

Integration Testing

• Plan, lead, and execute integration test plans for Simulator, Prototype, Pre-Series, and Series Production vehicles.
• Produce test documentation including test plans, reports, and sign-off material.
• Ensure all testing and vehicle movements comply with security and safety standards.

Problem Solving & Technical Support

• Create and process problem-solving tickets (KPM, IVA, iCAPTURE).
• Provide responsive technical support to Engineering, Manufacturing, Quality, and other business areas.
• Diagnose electrical system issues, support rectification work, and assist with electrical/electronic updates.

Planning & Coordination

• Own integration testing KPIs, planning workbooks, and scheduling.
• Act as the main point of contact for integration planning activities.
• Lead planning meetings and escalate issues when required.

Additional Responsibilities

• Support CP-Tool database management, LabCar/Rig build, simulation activities, and Electrical Engineering workshop duties.
• Assist with fleet planning and support the Functional Manager when required.
• Promote continuous improvement and share technical learnings across the organisation.

Skills & Experience Required

• Background in Automotive Electrical Systems and electrical/electronic integration.
• Experience in Verification, Validation, and Testing (VVT) processes.
• Proficient with automotive diagnostic tools, test equipment, and reporting systems.
• Strong planning, organisation, and communication skills.
• Experience in problem-solving methodologies and continuous improvement.
• Ability to quickly learn and operate specialist engineering equipment.
• Degree (or equivalent experience) in Electrical Engineering, Automotive Engineering, Electronics, or similar.

Are you ready to earn while you learn and become a multiskilled engineer at a cutting-edge dairy site?

Across four years, youll combine hands-on experience with classroom learning, keeping our technology running and helping deliver household-favourite products, while building a career-defining skill set.

How You Will Make an Impact

Embark on a four-year engineering apprenticeship at Arlas Taw Valleysite, working alongside a team of skilled engineers to maintain, repair and install machinery that powers our production. When issues arise, youll be the problem-solver who keeps lines running and our products flowing, from Cravendale milk to Skyr yoghurt and Anchor butter. Your learning is delivered in structured blocks with*Calderdale Collage,*blending practical and classroom training.

• Carry out maintenance, repairs and installations across automated production equipment
• Support root-cause problem solving and continuous improvement to reduce downtime
• Apply safety-first practices while developing hands-on technical capability
• Build knowledge across processing, packaging and utilities systems
• Progress through structured college blocks and on-site training to achieve qualifications

What Will Make You Successful

Youre 18 or overby September 2026and ready for a hands-on role, bringing a solid educational foundation with at least five GCSEs at grades 94 (A*C), including Maths and English (or the Scottish equivalent). Youre motivated to learn whether thats picking up new skills on the job or sharpening your knowledge in the classroom.

A curious problem-solver at heart, you love figuring out how things work and fixing issues fast. Youre safety-conscious, a clear communicator, and a true team player who collaborates well. Organised and resilient, you can balance structured learning blocks with on-site responsibilities. When you apply, please list your qualifications clearly and include scanned copies of your certificates.

What Do We Offer?

Salary progression:

Year 1: £21,000 per annum

Year 2: £25,484.71 per annum

Year 3: £26,500 per annum

Year 4: £27,500 per annum

Youll enjoy a comprehensive rewards package, including 26 days holiday plus bank holidays, a pension with matched contributions up to 6%, and life assurance at four times your annual salary. Youll have access to discounted products through our Staff Shop, and were committed to your training and development. Our flexible benefits let you buy up to five additional days of annual leave and unlock retailer discounts via the My Benefits platform. During study blocks with our education partners accommodation and expenses for food and travel are provided.

Programme structure and qualifications:

Year 1: 19 weeks at college

Year 2: 10 weeks at college

Year 3: 15 weeks at college

Year 4: Fully based at site

Qualifications: OAL Level 3 in Food & Drink Engineering Maintenance; Level 3 Health & Safety Award; 18th Edition Wiring Regulations Certificate

Would You Like to Join Us?

If this position is of interest, please apply directly via our careers page with your CV and your proof of GCSE certificates. Applications will close6th April 2026

Any questions at all please reach out to Oliver Hickson-Burr -Talent Partner

Recruitment process:

• CV shortlisting
• If successful - HireVue video interview
• Group interview (Teams):18th or 19th of May 2026
• This stage includes a competency-based interview and a group assessment.
• Final interview: Held at your preferred site and includes a dexterity task and meeting the team.

Shape the Future of Dairy

Arla is a global leader in the dairy industry, committed to enabling good food choices that make life better, providing people with natural, sustainable nourishment, while taking care at every step to ensure Arla is a choice they can feel good about. If you are looking to shape the future with an ambitious global cooperative that truly cares about your growth, where everyone feels valued and empowered, and collaboration is the core of culture, Arla is a choice you can feel good about.

Ref.: 104020

Electrical Systems Design Engineer

• Location: Yateley
• Hours: Mon–Fri 08:30–17:15, Fri 08:30–16:00 (5 days in the office)
• Contract Length: Minimum 6 months with possible extension
• Rate: £45ph - £50ph Outside IR35

The Role

You’ll be involved in the full cycle of retro fitting control system design, from developing solutions and producing detailed electrical drawings to specifying, sourcing, and scheduling equipment. Working closely with project engineering colleagues, you’ll contribute to delivering innovative automation and control solutions across a variety of projects.

Responsibilities

• Designing retro fit control system solutions including PLCs, networks, SCADA/HMI, and telemetry systems
• Creating and configuring design documentation, network architecture diagrams, electrical schematics, and general arrangements
• Assisting in the production of FDS and SDS specifications
• Selecting, identifying, and procuring electrical equipment and instrumentation
• Undertaking and managing site surveys around the M25

About You

• Electrical Engineering qualification
• Experience in the water industry is a must have.
• Skilled in electrical design tools such as EPlan or AutoCAD
• Knowledge of automation, control systems, and retro fit control panel design/manufacture
• Full UK driving licence and happy to travel around the M25
• Eligible to work in the UK

To be considered for this role please either hit the ‘Apply’ button on this site or email your CV directly to I can also be contacted directly on. I look forward to hearing from you!

ATA Recruitment specialise in the recruitment of Engineers across the UK, so if this role is not for you, please do have a look on our website for further potential opportunities which may suit your skills and experience better - If you have the skill, we have the recruitment knowledge and together we can find you your perfect job! - ;

You must be eligible to live and work within the UK. Sponsorship is not provided

ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Our client is a Refinery which is located on the east coast of England in North Lincolnshire, United Kingdom. The Humber facility include crude distilling, naphtha reforming, fluid catalytic cracking, hydrodesulfurization, thermal cracking and delayed coking units. The refinery has two coking units with associated calcining plants. This is the only coking refinery in the United Kingdom, and a producer of high-quality specialty graphite and anode-grade petroleum cokes. The refinery also produces a high percentage of transportation fuels. The majority of the light oils produced by the refinery are distributed to customers in the United Kingdom by pipeline, railcar and truck, while the other refined petroleum products are exported throughout the world.

They are currently seeking a skilled and experienced Electrical Project Engineer to join their team on a temporary basis initially covering 12 months but this could continue after.

THE ROLE:

Provide technical engineering expertise to enable estimates, studies, and design and construction functions to be fulfilled.
Review the scope of works for the Project to ensure it is clearly understood and highlight any uncertainties or omissions.
Be actively involved with any subsequent queries and discussions in establishing an accurate scope and understanding.
Produce scopes of work as required.
Produce specifications as required.
Produce calculations as required.
Assist in generation of cost estimates.
Establish and maintain good working relationships.
Ensure all designs & documentation (including vendor & manufacturer supplied information and inspection documentation) comply with company standards and requirements.
Maintain a full Project history ‘file’ documenting written and verbal instructions.

Standard working hours are 08:00 - 16:30. However, they also have 2 different working patterns as part of the flexible working policy at the business which is available to Agency workers.

THE CANDIDATE:
Experience in design and construction within the Petrochemical sector.
Establishes priorities and develops critical tasks.
Good organisational skills.
Self motivated and able to work as part of a Team.
Degree in engineering.
Desirable to have ten years experience in a similar role.
Knowledge of Hazardous areas and types of protection.
Knowledge of BS7671 Wiring Regulations.
Knowledge of 11kV and 415V distribution systems.
Knowledge of discipline specific design software required.
Intermediate level computer skills to include word processing, spreadsheets, email, database.

THE CONSULTANCY:
Edwards & Pearce acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers. Edwards & Pearce is an Equal Opportunities Employer.

Are you an Electrical Design Engineer looking for your next contract opportunity? If so, please read on…

Location: Gloucester
Duration: 6 month initial
Rate: £43-48 per hour (Outside IR35)

We’re working with a leading consultancy delivering major data centre projects and are looking for an Electrical Design Engineer to join the team on a contract basis.

This is a great opportunity to get involved in large-scale, mission-critical facilities, working alongside experienced multidisciplinary teams in a fast-moving environment.

Essential Skillset:

• Electrical Design Engineer with data centre / mission-critical experience
• Strong background in power systems and resilience strategies
• Experience with tools such as AutoCAD, Revit, ETAP, Amtech, SKM or similar
• Strong communication skills and a proactive approach

Key responsibilities:

• Electrical design from concept to detailed design
• LV/HV systems, UPS, generators, switchgear, and power distribution
• Producing calculations, drawings, and technical documentation
• Coordinating with multidisciplinary teams and supporting delivery

If this is something of interest please get in contact with Alex Hooton at JAM recruitment as soon as possible.

OLG Recruitment are currently looking for an Electrical Project Engineer for our client located in Immingham. This is a 12 month contract position.

Basic purpose/accountabilities:

To provide engineering and design service, so that:

• Engineering requirements are properly implemented.
• Technical support is provided in the engineers field of expertise in support of operations and the development of new projects.
• Provide support and guidance to designers and drafting personnel in production of drawings and specifications to ensure these are produced to Company Standards without error and to an agreed schedule.
• Co-ordinate and own activities to ensure design packages are completed in a timely manner.
• Provide a focal point between the Project Contractor, Vendors (which may include Equipment suppliers and/or sub-contractors to the main engineering/construction contractors), Project Team and Central Records Group.
• Ensure all site measurement and investigation work is accomplished to ensure design allows for safe and economic construction.
• Provide feedback to the Central Records Group at the end of the Project to ensure any possible improvements to the Standards and/or Procedures are captured for inclusion in future Projects.

Primary functions/responsibilities:

• Provide technical engineering expertise to enable estimates, studies, and design and construction functions to be fulfilled.
• Review the scope of works for the Project to ensure it is clearly understood and highlight any uncertainties or omissions.
• Be actively involved with any subsequent queries and discussions in establishing an accurate scope and understanding.
• Produce scopes of work as required.
• Produce specifications as required.
• Produce calculations as required.
• Assist in generation of cost estimates.
• Establish and maintain good working relationships.
• Ensure all designs & documentation (including vendor & manufacturer supplied information and inspection documentation) comply with standards and requirements.
• Maintain a full Project history file documenting written and verbal instructions.

Critical skills Essential Qualifications

• Experience in design and construction withinthe Petrochemical sector
• Establishes priorities and develops critical tasks
• Good organisational skills
• Self motivated and able to work as part of a
• Degree in engineering
• Desirable to have ten years experience in a similar role
• Knowledge of Hazardous areas and types of protection
• Knowledge of BS7671 Wiring Regulations
• Knowledge of 11kV and 415V distribution systems
• Knowledge of discipline specific design software required
• Intermediate level computer skills to include word processing, spreadsheets, email, database

Role: Electrical Maintenance Engineer
Location: Clitheroe
Rate: £38 per hour
PAY: Outside IR35 (LTD)
Length of contract: 3 months (plus)
Skill set: Electrical Maintenance, PPM work and small projects to help the site run efficiently
Start Date: ASAP

Some Details: Are currently recruiting for a contract Maintenance Electrician working on a busy manufacturing site in Clitheroe. You will have experience working on your own and park of a team, dealing with Maintenance activities that come with a busy food packaging site. The role is coving whilst the site goes through a busy period and also recruits for permanent Engineers. This role could also be a great opportunity for a permanent Engineer, immediately available that would consider going temporary first, before transferring over to a permanent engineering role.

Responsibilities:

• Planned Maintenance
• Reactive Maintenance
• Project work to make site run more efficiently
• Adding all Maintenance activities to their CMMS system

Machinery & Equipment:

• PLC controls
• Conveyors
• Sleevers
• Tray sealers
• Printers
• Metal detectors
• Packaging lines
• Weighers
• Refrigeration
• Site services

Interested? Send your UPDATED CV to the advert NOW!

Location: Site based office attendance minimum 3 days per week AND 2 days remote working
Status: Contract - INSIDE IR35
Duration: Approved until 31dec26 (renewable)
Reports to: Transverse Discipline Lead within the Integrated Transverse Team

Morson Edge are working on behalf of a major player within the Energy Sector who have a current requirement for an experienced Welding Engineer to join their established, site-based, Transverse Engineering Team in Bridgwater, Somerset. This is a (renewable) contract position - inside IR35.

The successful candidate will comprise part of a wider, multi-national Joint Design Office team responsible for supporting Review and Acceptance of design activities of a classified plant. This dynamic and multi-disciplinary design team undertake the important intelligent customer role on behalf of the Project.

The Joint Design Office (JDO) has been created to reinforce site-based engineering to quickly respond to engineering queries/problems coming from site construction to deliver the schedule and to deliver an increased scope of work. By being located close to the construction works the JDO team are able to quickly react and provide technical solutions/answers - thereby crucially assisting construction teams swiftly and efficiently.

Overview

• The post-holder will be a Welding or Materials Engineer, contributing to the technical assessment of engineering queries raised by the site Contractor on the M&E scope across the CI/BOP and Nuclear Island buildings.
• The role will consist of both client and responsible designer activities.
• The role will be focused on the welding discipline but will interface with other disciplines and with several parties, such the site Contractors (composed of main suppliers and sub-suppliers), Construction teams, Quality teams, Project Management teams, or Design teams (embedded within the JDO organisation on site, or in back office).

Key Responsibilities

• Responding to General Queries, Non-Conformances, Change Request, and Exemption Requests originating from the MEH Contractor on site, with the support of the Responsible Designer or site Experts when needed.
• Provide adequate oversight to ensure the Nuclear Safety and Environmental Regulation requirements are met.
• Support the integrated team with technical assessment of contractor queries (welding defects, and other welding and NDT associated modifications)
• Carry out nuclear safety and environmental assessment (categorisation) of queries
• Challenge design decisions so that engineering and design aligns with the project strategy.
• Assist in co-ordinating support from other external organisations.
• Contribute to the resolution and closure of Open Points.
• Assess technical risk and subsequently address this risk.
• Maintain a strong relationship with EPR Engineering (Responsible Designer)

The Skills

• Typically degree or equivalent experience in a welding engineering discipline.
• Experience/understanding of welding engineering and NDT in nuclear or high hazard industries
• Experience applying multi-disciplinary technical knowledge within the nuclear industry.
• Knowledge of the construction / installation industry.
• Knowledge of Health & Safety legislation including CDM
• Ability to influence a diverse range of stakeholders, particularly those in a site environment.
• Ability to work independently, be pro-active, report on and escalate relevant issues.

We’re currently seeking two experienced Power System Studies Engineers to support major international onshore energy projects.

Key Details

• Start: ASAP
• Rate: £65 per hour (Outside IR35)
• Location: Surrey
• Working Pattern: 4 days onsite / 1 day remote

Purpose of the Role

You’ll be providing power system studies support for onshore projects, working closely with project teams and external vendors to deliver high-quality engineering studies.

Scope of Work

• Running and reviewing power system studies
• Equipment sizing and system analysis
• Overseeing third-party study vendors
• Delivering studies using EMT software

Skills & Experience Required

Experience with captive power generation with proven capability in:

• Load flow
• Short circuit
• Dynamic motor starting
• Harmonic studies
• Arc flash
• Transient stability

Intermediate proficiency inETAP, with a strong understanding of power systems within large-scale onshore projects

To apply please follow the link on this advert. RHL is a recruitment consultancy and employment agency.

DCS Recruitment currently seek an experienced data cabling engineer in Great Yarmouth on behalf of a national communications contractor.

Vacancies: 2

Immediate start available

Night shifts

Must have experience in data cable and device installation within a retail environment as well as removals, moves, and changes. CAT6/6a data cabling.

The successful candidates will:

• Hold a valid CSCS/ECS - industry related accreditation is preferred e.g. datacoms, network infrastructure, cabling installer
• Hold a valid IPAF 3a&3b
• Hold a valid UKATA asbestos awareness certificate (can be done online)
• Have their own hand tools, installation and termination tools and drill(s). SDS / impact drivers are beneficial.

You will be asked to provide two relevant work references and right to work ID prior to start.

Call Melanie on (phone number removed) (option 2) or submit your cv to receive a call back.

DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

DCS Recruitment currently seek structured cabling engineers (CAT6) in Northampton on behalf of a national structured network contractor.

Vacancies: 1

Due to start wc 16th February 2026

Working hours will be 8am-6pm M-F

The successful cabling engineer will be carrying out CAT6 installation for wi-fi upgrades within a live care setting. Installation of data cabling including terminations and testing, and installation of wireless access points.

The successful candidate must:

• Hold a valid ECS/CSCS - preferably endorsed by a telecoms industry qualification e.g. datacoms, field engineer, cabling installer, or network infrastructure
• Have own PPE, hand tools and termination kit
• Have a valid DBS Certificate - any level; basic DBS, standard DBS, or enhanced DBS
• PASMA
• Asbestos Awareness (We can supply link to Free course to successful candidate)
• Manual Handling (We can supply link to Free course to successful candidate)
• Working at Heights (We can supply link to Free course to successful candidate)

Call Melanie on (phone number removed) (option 2) or apply online to receive a call back.

DCS Recruitment and all associated companies are committed to creating a working environment where diversity is celebrated and everyone is treated fairly, regardless of gender, gender identity, disability, ethnic origin, religion or belief, sexual orientation, marital or transgender status, age, or nationality

We are seeking an experienced CMM Programmer, with knowledge of LK metrology Camio software for a 6-month role in Worcestershire.

Able to assist in the workload of creating new programmes to align new machines.

Support to validate the new programs prior to using them in a production environment. This typically involves checking the CMM programs have the correct nominal/tolerances programmed in and the correct features on the component are being probed, followed by a repeatability check.

This role falls inside IR35 and would require the use of an Umbrella Company.

• Must be a Sole UK National (due to program security restrictions).
• Ideally holds UK Government Security Clearance as this will be required.

Tasks include:

• Creation of new programs to align a new CMM machine.
• Review and update all of the current programs to ensure efficiency/accuracy
• Reverse engineering programming for historic tooling
• Working closely with our current inspectors to improve their CMM programming and understanding

Essential skills / Experience:

• Excellent understanding/knowledge of LK metrology Camio software
• Excellent understanding/knowledge of GD&T
• Strong problem-solving skills
• Strong metrology background

We have an exciting opportunity for a Lead Control Systems Engineer to be based full time onsite at Warrington or Cumbria.

This is a contract role inside IR35 at the market rates.

Candidates can start with BPSS security clearance whilst higher level clearance is being undertaken. You should be British Citizens and passport holders and not have worked outside the UK during the past 5 years.

ROLE SUMMARY:

We are looking for an experienced Lead Control Systems Engineer to take technical leadership of control systems design, implementation, testing, commissioning, and ongoing support across multidisciplinary projects. You will be the technical authority for control systems engineering, ensuring robust, compliant, and high-quality solutions, and driving engineering excellence across the project lifecycle.

This is a hands-on leadership role with strategic influence - ideal for engineers who want to shape architecture, mentor others, and make high-impact decisions.

KEY RESPONSIBILITIES:

Technical Leadership & Design Authority

Lead the development of control systems architecture, high-level and detailed design, and technical standards.

Act as the technical authority for control systems, owning approvals and design decisions.

Drive the selection and integration of PLCs, HMIs, SCADA, communication protocols, safety systems and related automation technologies.

Ensure compliance with relevant industry standards, safety, and regulatory requirements.

PROJECT DELIVERY:

Lead control systems engineering activities throughout the full project lifecycle - from concept and requirements capture to testing, commissioning and handover.

Provide robust control logic design, software development oversight, and verification/validation.

Collaborate closely with project management to ensure quality, schedule, risk, and cost targets are met.

Coordinate with other engineering disciplines to resolve technical interfaces and issues.

TEAM LEADERSHIP & DEVELOPMENT

Lead, mentor, and develop a team of control systems engineers, coach on best practices.

Assign tasks, oversee workload distribution, and review deliverable documentation.

Lead and actively participate in the configuration, programming, and testing of PLC, HMI, and SCADA control systems.

Promote continuous improvement of tools, processes, and standards.

STAKEHOLDER ENGAGEMENT:

Act as the primary technical liaison with clients, partners, and internal stakeholders for control systems.

Represent control systems discipline in design reviews, technical proposals, and client meetings.

DOCUMENTATION & ASSURANCE:

Drive quality and consistency in deliverables including functional design specifications, software and hardware design documentation, test procedures, commissioning reports, and O&M documentation.

Oversee and approve verification and validation testing including internal testing (FAT), customer witness testing (CAT) and site acceptance / commissioning activities.

ESSENTIAL:

Degree in Engineering (Electrical, Control Systems, Automation) or equivalent experience.

Significant experience (typically 8+ years) in control systems engineering in a technical lead or Senior Engineer role.

Expertise with PLC/HMI/SCADA design, programming, and implementation.

Demonstrable experience in configuring and utilising simulation tools to support system testing, validation and verification activities.

Proficient in producing high?quality technical documentation with clarity, accuracy, and consistency.

Proven track record leading medium to large control system projects from design through commissioning.

Excellent stakeholder communication and collaboration skills.

Demonstrable experience mentoring and leading engineering teams.

Strong problem-solving, documentation, and risk management skills.

Knowledge of safety and compliance standards (eg IEC, ISO, industry-specific).

DESIRABLE:

Experience with multiple control platforms (e.g. Rockwell, Siemens, Schneider).

Experience in regulated or complex technical environments (e.g., Energy, Nuclear etc).

Knowledge of Sellafield Engineering Standards.

Knowledge of functional safety and cybersecurity standards.

Professional registration (CEng, IEng) or equivalent.