Biomedical Field Calibration Engineer- Bedford Area
JPenn Medical is an established test and calibration supplier to the NHS, private healthcare providers, UK residential care and a range of other business sectors which use medical equipment and devices. Our trusted relationships with leading global manufacturers enable reputable high-quality technical knowledge and skill to play a key part in our service.
A day in the life of a BiomedicalField Calibration Engineerat phs will involve;

• Working in multiple Medical environments daily.
• Carrying out the required Test and calibration on Medical devices.
• Completing all relevantreports and certificationassociated withyour inspection & testing.
• Ensuring all reports and certification are completed and summited on time.

What we offer at phs Group:

• Salary of£25,000 - £29,000
• Overtime available foradditional earningif applicable
• Ongoingcareer developmentopportunities
• Acompany vehicleand fuel card
• phsPerks(Partnership withRewardGateway)
• phs Shop (Discounton household consumables
• A 24 hour wellbeing helpline
• Pension
• Additional earningpotential through referral
• 23 daysholiday allowanceplus bank holidays

The ideal candidate for aBiomedical Field Calibration Engineerat phs will have:

• Full UK manual Driving License for a minimum of 12 months (Subject to insurance requirements), with a maximum of 6 points.
• An understanding of Health and Safety Regulations within the workplace.
• Demonstrate flexibility in working hours to test and calibrate equipment and to provide a service that exceeds customer expectations.
• A fully enhanced DBS check will be completed at offer stage
• Be confident to explain to the customer any necessary amendments and adjustments that have been made to the equipment.

About phs:
Phs compliancefocuses onhelping more than 2,000 UK business customers test, install and manage their property infrastructure assets. PHS Compliance self-delivers electrical test and inspection, M&E installation & maintenance & asset verification with over 400 engineers based nationwide. Our technical and quality management standards are second to none, we are one of a few UK Companies accredited to UKAS 17020 inspection body standards for fixed wire and portableappliance testing.
At phs, we pride ourselves on our diverse workforce, and ensuring we have an inclusive environment for all our staff. We remain committed to ensuring our teams can bring their true selves to work without risk or fear of discrimination.

Construction Project Manager
12 Months
Based: BAE Warton– 5 days onsite
Hourly Rate: £30.42 Paye or £ 40.90 Umbrella inside IR35
37 Hours per week

Overview
As a Specialist Works Service Engineer you would be responsible for the coordination of the design, construction planning and implementation of a wide range of infrastructure projects both on the estate and connected to plant and equipment across the BAE Systems Warton Unit sites (Samlesbury)

Skills

• Previous experience in the Design Management of Construction activities
• Previous experience in Construction Management
• Good supplier Management and communication Skills
• Knowledge of construction and or Plant and Equipment installations
• Relevant qualification of equivalent experience in managing Health & safety - NEBOSH

The Job

• Liaising with both internal and external customers, engineering professionals, subject matter experienced and professional consultancy support teams
• Co-ordinating with consultant teams and construction contractors in respect of the development of defined facilities
• Responsible for all project design phases following the RIBA stages
• Responsible for all installation in accordance with the current company, statutory health and safety legislation, building control and CDM regulations

Please note – FULL SC clearance is required for this role

About BAE:
BAE Systems is a leading global defence, aerospace, and security company. They’re experts in delivering advanced solutions for air, land, and naval forces, as well as commercial aerospace and cyber security. Known for its commitment to innovation and excellence, BAE Systems offers exciting career opportunities for those looking to make a significant impact in cutting-edge technology and defence sectors.

Inclusion statement
Outsource UK is committed to creating a diverse environment and is proud to be an equal opportunity employer. You’ll receive consideration for your application without regard to race, religion or belief, gender identity or expression, sex, sexual orientation, disability, marriage and civil partnership, pregnancy and maternity, or age.

FPGA Firmware Engineer - Ulverston Hybrid or Remote (3 days on site per month, Tuesday to Thursday ) which is fully expensed - Travel & Accommodation
Are your Firmware Engineer or FPGA Design Engineer career goals not being met ? Are you working in a huge corporate, in a very large team on only a small module of an overall project ? Bored ? Are you frustrated by the bureaucracy ? Are you working in a dull, tired domain ?
As an FPGA Engineer you’ll enjoy solving a variety of technical challenges in a culture where everyone trusts each other. You’ll gain deeper job satisfaction, variety, better rewards and a great quality of life inside and outside of work. You’ll like their worker autonomy, project ownership, with a commitment to inclusion, diversity and work-life balance. A good company culture resulting in a low turnover of engineering staff. Renewed investment in the business by the parent enabling strong future growth which opens up possibilities to work on other interesting products or projects within the subsea industry.

We are an exclusive partner to this exciting company having worked with them successfully for nearly 15 years.

As a Firmware Engineer, FPGA Engineer you’ll love working in a high-technology business dedicated to providing the most reliable imaging and acoustic equipment for use in underwater applications.

You’ll enjoy a truly international customer base, their cutting edge technology has been adopted as the preferred choice in an expanding variety of sub-sea applications including deep sea infrastructure, defence, renewables, marine life tracking systems, dive search & recovery operations, oil & gas and scientific discovery.You’ll work at a state-of-the-art manufacturing facility in Ulverston, Cumbria, on the edge of the beautiful Lake District National Park, offering exciting lifestyle choices.
You’ll design, implement, and optimise FPGA-based digital architectures for sonar, acoustic processing, and subsea sensing systems. The role focuses on real-time signal acquisition, high-throughput digital signal processing (DSP), beamforming, and robust operation in demanding subsea environments. The FPGA Engineer will contribute to the development of reliable, high-performance embedded systems deployed in offshore, marine, defence, and scientific applications.
What you’ll do:1. FPGA Architecture & Real-Time Signal ProcessingDevelop FPGA designs for: Multi-channel acoustic data acquisition Digital down conversion (DDC) Filtering (FIR/IIR) FFT processing Beamforming algorithms Pulse compression and matched filtering Implement high-speed streaming data pipelines Optimise fixed-point arithmetic for deterministic real-time performance Design low-latency architectures suitable for active sonar systems.
2. High-Speed Interface DevelopmentImplement and validate interfaces such as: High-speed ADC/DAC interfaces JESD204 LVDS SERDES Develop memory interfaces (DDR3/DDR4) for buffering high-bandwidth acoustic data Ensure deterministic timing and synchronisation (e.g., PTP, trigger alignment).
3. Hardware Integration & Subsea ConsiderationsCollaborate with analogue and hardware engineers on: Front-end acoustic transducer electronics Low-noise acquisition chains Clocking strategies and jitter management Consider power efficiency and thermal constraints in sealed subsea systems Contribute to design for reliability in harsh marine environments.
4. Verification, Testing & Validation Develop simulation testbenches for signal processing chains Perform bit-accurate modelling (MATLAB/Python to RTL correlation) Conduct hardware bring-up and debug using:o Integrated Logic Analysers (ILA)o Oscilloscopeso Spectrum analysers Support acoustic tank testing and sea trials where required.
5. Performance Optimisation Achieve timing closure for high-speed DSP architectures Optimise FPGA resource usage (DSP slices, BRAM, LUTs) Minimise latency in signal paths Improve power efficiency for long-duration subsea deployments.
6. Documentation & Compliance Produce design documentation and verification reports Support compliance with relevant standards (e.g., EMC, CE, marine standards, defence standards where applicable) Participate in design reviews and risk assessments (FMEA).
What you’ll need: Strong proficiency in VHDL and/or Verilog Experience with Xilinx (AMD) or Intel FPGAs Strong understanding of: Digital signal processing Fixed-point arithmetic FFT and filtering implementations Multi-rate signal processing Experience with high-speed ADC/DAC interfacing Knowledge of clock domain crossing and timing constraints Familiarity with MATLAB or Python for DSP modelling.Qualifications, Degree in Electronic Engineering or related discipline. Postgraduate study in DSP, acoustics, or embedded systems (advantageous).
Key Performance Indicators (KPIs) Successful real-time processing at required bandwidth Timing closure at target clock frequencies Low defect rate in sea trials.
About the company:The company are well established, stable, and specialise in the production of high performance acoustic sensors, imaging sonar, depth sensing and navigation tracking equipment for the subsea industry.With the backing of its parent company they are now poised to launch more new products, next generation sonar systems, providing robust underwater solutions in the harshest environments for their customers worldwide.

Are you a Senior SMPS Design Engineer with experience in PSU design, covering topologies, magnetic design, and fault-finding and diagnostic skills?

Are you keen to work for a global power electronics business? If so, our client has the perfect opportunity for you.

Our client is looking to hire a Senior SMPS Design Engineer to join their Power + Solutions team in Devon.

The Role

In this Senior SMPS Design Engineer position, based in Ilfracombe, you will be responsible for:

• Designing and developing power supply solutions using appropriate technologies to meet customer specifications.
• Creating and writing technical specifications, occasionally in conjunction with customers, where none exist or where existing specifications are insufficient.
• Mentoring and providing technical support to junior members of the team.
• Reviewing and approving engineering reports produced by junior team members, recognising that reports issued to customers reflect the professionalism of both the individual and the organisation.

About You

To apply for this Senior SMPS Design Engineer role based in Ilfracombe, you will need:

• Demonstratable, high level experience within SMPS Design.
• Provable experience in PSU design, covering a variety of topologies including buck, boost, half-bridge, full-bridge, LLC and PFC circuits.
• Magnetics design knowledge, including transformers and chokes.
• A strong understanding of the principles of PSU design.
• Knowledge of available components, their performance characteristics, and relevant suppliers.

Additional Information

This is an on-site position, with potential relocation assistance available.

Our client welcomes applications from suitable candidates, and potential sponsorship may be offered.

To apply for this Senior SMPS Design Engineer role based in Ilfracombe, please submit your application today.

Recruit4Staff are proud to be representing their client, a leading engineering company in their search for a Field Service Engineer to work in their leading facility in Telford.

For the successful Field Service Engineer our client is offering:

• Basic Salary up to £39,000 per annum - Depends on experience
• Working Days 8:45 - 5pm Monday to Friday
• Permanent position within an expanding company
• Work uniform provided
• Clean / Modern working environment
• Offsite allowances applicable when working away from site
• Company Vehicle is provided
• Lots of overtime available on a regular basis, paid at premium rates - High earning potential
• Smart Phone & Laptop are both provided with this role
• 23 days holiday which rises to 25 days after year 1

The Role - Field Service Engineer:

• Installation/Commissioning/Servicing of the companies products at customer sites
• Providing technical support to customers via phone/email & in person
• Fault finding & diagnostics of systems / equipment
• Attending breakdowns where necessary
• Working from engineering drawings to build various products
• Carrying out both Mechanical & Electrical projects
• Testing & Inspection of systems and equipment
• Providing remote support to customers (Phone & Email)

What our client is looking for in a Field Service Engineer:

• 17th/18th Edition
• Apprentice served Engineer
• Electrical/Mechanical skills and knowledge is essential due to this being a multi skilled position
• Worldwide Travel is required for this position, you will be notified in advance prior to travelling away
• Full UK Driving Licence
• Passport is essential

Key Skills or Similar Job Titles: Field Service Engineer, Field Service Technician, Service Engineer, Service Technician, Mechanical Engineer, Electrical Engineer, PLC’s, Robotics, Automation

Commutable from: Telford, Shifnal, Market Drayton, Shrewsbury, Newport, Albrighton, Wolverhampton, Whitchurch, Dudley, Kidderminster, Bridgnorth, Wem, Church Stretton

For further information about this and other positions please apply now.

This vacancy is being advertised on behalf of Recruit4staff (Wrexham) Limited who are operating as a recruitment agency, agent, agencies, employment agency or employment business.

TelfEng

Electrical Engineer
County Tyrone, Northern Ireland
Permanent or Contract Opportunities

A well-established food manufacturing business in Northern Ireland is looking for an Electrical Engineer to support operations across a busy production site.

The company produces a wide range of ready meals and prepared foods supplied to retail and foodservice customers across the UK and Ireland. With continued growth, they are looking for an engineer to help maintain the reliability and performance of production equipment.

The Role

Electrical fault finding on production and processing machinery

Planned preventative maintenance across site equipment

Diagnosing and resolving breakdowns to minimise downtime

Supporting improvements to production reliability and efficiency

What Were Looking For

Electrically biased Maintenance / Electrical Engineer

Experience within food manufacturing, FMCG, or high-volume production

Strong electrical fault-finding skills

Experience with production or automated machinery

The Opportunity

Salary up to £48,000

Stable and growing food manufacturing business

Opportunity to work on a range of production equipment

Contract / freelance engineers also considered

Hours: 4 on 4 off 6am-6pm & 6pm-6am
Salary: £46,555
Location: Oakham

We are currently recruiting a skilled and motivated Multi Skilled Maintenance Engineer to join a well-established manufacturing site operating a modern, automated production environment. This is an excellent opportunity for a Multi Skilled Maintenance Engineer seeking long-term stability, structured progression to join a growing and forward-thinking business.

Benefits:

• Total package £46,555 (including shift allowance)
• 23 days holiday
• Annual pay review
• Auto-enrolment peoples pension
• Christmas shutdown
• Opportunity (post-probation) for 208 hours contractual overtime taking annual salary to £51,392

Responsibilities:

• Providing fast and effective breakdown response across all production machinery
• Carrying out planned preventative maintenance (PPM)
• Diagnosing and repairing electrical and mechanical faults
• Supporting continuous improvement and automation projects
• Working closely with production teams to achieve performance targets (OEE)
• Maintaining high standards of health & safety at all times

Requirements:

• Time-served apprenticeship or equivalent engineering qualification
• Strong electrical and mechanical fault-finding skills
• Experience within a manufacturing or production environment
• Exposure to automation or injection moulding (advantageous)
• A continuous improvement mindset
• Ability to work both independently and as part of a team

Commutable from: Melton Mowbray, Corby, Leicester, Kettering, Market Harborough, Grantham and Peterborough

This is a fantastic opportunity for a Multi Skilled Maintenance Engineer to join a business that values its engineering team, offers clear progression pathways, and rewards commitment with structured overtime and pay development.

If you are a motivated Multi Skilled Maintenance Engineer looking for your next opportunity, apply today with your CV or get in touch with Megan at Probe Technical Recruitment for a confidential discussion.

Please Note: Candidates must have the right to live and work in the UK.

Our aim is to help you secure the best possible future for yourself & this is a totallyFREEservice to all our Candidates.

If you believe that your skills and experience match what we are looking for please call me orAPPLYand I will be in touch.

Should you want to learn more about any of ourMAINTENANCE, RELIABILITY & SERVICE ENGINEERINGvacancies, or should you just want to discuss your particular needs, then please do not hesitate to contact meto have an informal, confidential chat.

Probe Technical Recruitment, providing Maintenance, Reliability & Service Engineering Recruitment Support since 1994

My job

Multiskilled Engineer
Location: Raceview Hatchery Ballymena
Hours: Mon-Friday

We’re looking for a proactive Multi-Skilled Engineer to join our Hatchery Engineering Team. If you enjoy problem-solving, working with automated machinery, and improving equipment performance, this role offers long-term stability, variety, and the chance to make a real impact across two modern hatchery sites.

What You’ll Do

• Maintain and repair hatchery machinery and vehicles.
• Lead fault-finding and re-engineering activities on automated equipment.
• Support contractor management and installation projects.
• Carry out statutory inspections and preventative maintenance.
• Monitor energy usage using BMS systems.
• Assist with spare parts management and stock control.

What We’re Looking For

• Time/Skill-Served Engineer (Electrical & Mechanical) - Must be Time/Skill-Served Electrically & Mechanically
• Strong diagnostic and fault-finding skills on automated machinery.
• Ability to read electrical/mechanical drawings.
• Good reasoning, organisation, and IT skills.

The company

Pilgrim’s Europe produces some of the best-known and most iconic brands in the UK and Ireland, including Fridge Raiders, Rollover, Denny, Richmond, Oakhouse and Moy Park, alongside a diverse range of industry leading own-label products in categories including fresh pork, lamb and chicken, working with all the major retailers and food service outlets.

Our portfolio extends to authentic chilled and frozen ready meals, snacking ranges, added value and food service products.

Across Pilgrim’s Europe we combine 20,000 of the best people in the industry, united by a shared set of core values and a passion for producing the highest quality, most delicious and innovative food, which is enjoyed by millions of people in the UK, Ireland and Europe every day. Our Pilgrim’s Europe team are based in our Pilgrim’s UK, Moy Park, Pilgrim’s Food Masters and Pilgrim’s Shared Services businesses.

What we’ll bring to the table

Competitive Salary

Competitive Holiday Entitlement

Pension Contribution

Family Friendly Policies

Learning and Development Opportunities

Life Assurance

People matter

Previous Next

Our values

Determination

Simplicity

Availability

Humility

Discipline

Sincerity

Ownership

Morson are recruiting Electronics Engineers for an initial contract within an advanced Calibration & Maintenance department. The team supports complex electrical and electronic test platforms, including Special-to-Type Test Equipment (STTE), used in the manufacture and testing of high-integrity systems.
This position suits engineers with strong electronics fault-finding, calibration experience, and a desire to work on varied and technical test equipment from DC through to Microwave technologies.

HNC/HND in Electrical & Electronics Engineering is essential.

About the Role

PAYE: £23.82 – £26.04 per hour
Umbrella: £32 – £35 per hour
Location: Stevenage

You will join an established team of Calibration & Maintenance Engineers responsible for electrical and electronic test equipment servicing, fault-finding, calibration, commissioning and supporting STTE.

Key Responsibilities

Calibrate, maintain and repair Electrical & Electronic Test Equipment, including Special-to-Type Test Equipment (STTE)

Diagnose and fault-find to component level across a wide range of instrumentation

Support routine calibrations, commissioning work and drift analysis activities

Utilise technical documentation, drawings, handbooks and specifications to perform measurements, repairs and provide technical guidance

Work within an experienced engineering team supporting complex test platforms

Mentor junior or less experienced team members when required

Manage multiple tasks and priorities effectively

Apply strong analytical and problem-solving skills in a fast-moving environment

(Desirable) Use SAP systems for workflow and documentation

(Advantageous) Experience working with Environmental Chambers

Requirements

HNC/HND in Electrical & Electronics Engineering — mandatory

Experience calibrating test equipment and maintaining electronic systems to component level

Strong understanding of calibration principles and processes

Ability to interpret drawings, specifications and technical documentation

Confident in electronics fault-finding, measurement and repair

Strong communication and ability to tailor technical information to the audience

Able to work within a busy engineering environment and handle multiple priorities

Experience with Environmental Chambers beneficial but not essential

SAP knowledge desirable

What This Role Offers

Long-term contract opportunity

Work within a skilled Calibration & Maintenance engineering team

Exposure to a wide range of electrical/electronic test equipment (DC to Microwave)

Strong development and training from experienced engineers

Ability to contribute directly to high-integrity test capability

Competitive PAYE and Umbrella rates

Heavy Plant Lead Engineer – Bristol Area

Salary: £23–24 per hour | Hours: 40 per week

NEOS Engineering are seeking an experienced Heavy Plant (Lead Engineer) to join a busy operations team, overseeing the maintenance and repair of a diverse fleet of heavy plant machinery. This is an excellent opportunity for a skilled engineer who takes pride in ensuring machinery is safe, reliable, and operational to meet production schedules.

Key Responsibilities

• Lead the maintenance, servicing, and repair of heavy plant machinery, including excavators, loaders, dump trucks, and ancillary equipment.
• Diagnose and troubleshoot mechanical, hydraulic, and electrical faults efficiently.
• Oversee preventative maintenance schedules to maximise uptime and extend asset life.
• Mentor and supervise junior engineers and technicians, allocating workloads and ensuring high standards of work.
• Maintain accurate service records, compliance logs, and parts inventories.
• Ensure all work is carried out in line with Health & Safety regulations, site policies, and operational procedures.
• Collaborate with operations teams to plan machinery requirements and minimise downtime.

Required Skills & Experience

• Extensive experience working on heavy plant machinery in a workshop and on-site environment.
• Strong mechanical, hydraulic, and electrical knowledge.
• Proven ability to diagnose and repair a wide range of plant equipment efficiently.
• Experience leading or supervising a small team of technicians.
• Good understanding of Health & Safety regulations, LOLER, PUWER, and other compliance standards.
• Strong organisational and communication skills.
• Full UK driving licence and ability to travel to multiple sites within the Bristol area.

Benefits

• Competitive hourly rate: £23–24 based on a 40-hour week.
• Opportunities for training and career progression.
• Work on a wide range of plant machinery, providing a varied and challenging role.
• Supportive team environment with clear leadership structure.

Are you an experienced Catering Engineer with expertise in Rational combi ovens, used to working on the road and now looking for a role based in one location?

Location: Canterbury, Kent

Salary: up to £40,000

Hours: Monday to Friday 9am - 5pm

Catering Engineer Benefits:

• 20 days annual leave + bank holidays
• Free parking onsite
• Company pension

Catering Engineer responsibilities would be:

• Service incoming combi ovens.
• Fault-finding and repairing combi ovens.
• Uploading and maintaining data via the internal system.
• Maintaining warehouse parts and stock levels.
• Liaise with office staff to ensure prioritisation of repairs.

Experience and skills required:

• A minimum of 2 years’ experience as a Catering Engineer working on rational combi ovens
• Be able to work independently
• Have a full UK driving licence
• Experience with Electrolux, Convotherm, Bonnet and Eloma ovens would be advantageous

Next steps:

If this sounds like the ideal position for you and you have the experience outlined above, then please apply and you will be contacted by a member of our team if your CV matches our requirements.

If you would like any further information before applying, then please call Ellie - Permanent Consultant on 01304 806053 or email

New Appointments Group, Expertly Matching Employers and Jobseekers since 1975.

We are committed to fostering a diverse and inclusive environment in line with the Equality Act 2010. All qualified applicants will be considered regardless of age, disability, gender reassignment, marriage or civil partnership, pregnancy or maternity, race, religion or belief, sex, or sexual orientation. New Appointments Group acts as an Employment Agency for permanent roles and as an Employment Business for temporary roles.

Uxbridge

£45,000 – £50,000 + Overtime + Benefits

We’re working with a well-established, highly respected plant hire business looking to bring in an experienced Workshop Powered Access Engineer to join their depot in West London.

This is a hands-on role working on a wide range of powered access equipment — perfect for someone who knows their way around MEWPs and wants to be part of a busy, well-run depot.

The Role

• Carrying out service, maintenance and repairs on powered access equipment
• Working on a range of kit including scissor lifts, boom lifts and cherry pickers
• Diagnosing faults across electrical, hydraulic and mechanical systems
• Completing pre-delivery inspections (PDI) to a high standard
• Ensuring all equipment is compliant and ready for hire
• Working closely with the hire desk and depot team to keep operations running smoothly

The Candidate

• Proven experience working on powered access equipment (MEWPs)
• Strong fault-finding ability across hydraulics, electrics and engines
• Ideally holds a CAP qualification (or working towards)
• Background in plant hire, powered access or similar environments
• Ability to work independently in a workshop environment
• Full UK driving licence

What’s on Offer

• £45,000 – £50,000 basic salary
• Overtime available
• Stable, long-term opportunity with a well-known name in plant hire
• Strong support network and well-equipped workshop
• Opportunity to develop further within the business

Rewards and Benefits on Offer:

• 33 days annual holiday including statutory bank holidays.
• Contributory pension.
• Life Assurance.
• Company vehicle and fuel, including personal allowance.
• Company mobile phone.
• Ongoing technical training, including IPAF, Safety Passport, working at heights and FLT.
• Structured path for career growth.
• Company wellbeing support package.
• Cycle2Work Scheme.
• 40 hours per week, working Monday to Friday

MTrecs New Opportunity:

MTrec Technical are proudly representing our prestigious engineering supplier, based in Middlesborough, with their plans for growth and expansion, by recruiting a permanent Crane Maintenance Engineer to join their team. You will be joining an expanding, dynamic company, with an excellent team-based culture and huge opportunities to progress your career. Our client is a major international player in their specialist industry and will be soon entering a period of sustained growth and expansion as they widen their customer portfolio, with blue-chip orders for many years into the future. You will be joining a very secure and expanding business, where you will enjoy a varied working environment, a great team culture and a fantastic new career move.

If you are a time served Maintenance Technician, please apply now for an immediate response.

The Job Youll Do:

• To be part of an experienced engineering team delivering the highest level of service to customers.
• You will be inspecting, servicing, maintaining, and repairing customers overhead cranes and lifting equipment across a wide range of industries.
• You will also offer advice to customers on safety and operational improvements to ensure they stay compliant.
• Liaising with on-site Engineers and Managers to identify problems and find effective solutions.

About You:

• Electro-mechanically trained (electrically bias), although Mechanical biased Engineers with good Electrical skills are considered.
• Time served electrically qualified (advantageous).
• Understanding and knowledge of electrical drawings an advantage.
• Comfortable working at height.
• Valid UK Driving Licence.
• Customer Focused.
• Attention to Detail with a trouble shooting approach.
• Organised and Presentable.
• LEEA Qualifications, an advantage but not essential.

Senior Solution Architect Lincoln (LN6)

• Salary £45,000 to £60,000 DOE
• 25 days annual leave inclusive of up to 3 days Christmas shut-down
• Buy or sell up to 5 days annual leave
• Annual Wellbeing allowance
• Two pension schemes to choose from
• Private Medical Insurance + discounts for additional family members
• Life Assurance scheme up to 4 x salary
• Share Save scheme
• Electric/Hybrid Car leasing scheme
• Cycle to work scheme
• Retail discounts
• Career development support

Join MASS at our Lincoln office as aSenior Solution Architect (MBSE)and play a key role in delivering cutting-edge EW solutions. Youll be helping to design, implement, and validate new capabilities, influence operational outcomes, and develop into a Subject Matter Expert within a high-performing, multidisciplinary team.

Led by ourPrincipal Solution Architect, the team is based at our modern Lincoln HQ on Teal Park, typically spending three days in the office and two from home giving you the best of both worlds: collaboration and flexibility.

The invaluable experience youll bring, to help us achieve more

As a thought leader, youll shape complex technical concepts from analysis through to delivery, applying your Model-Based Systems Engineering expertise to help design and implement cutting-edge solutions for our customers. You will be responsible for driving an expansion of our system modelling and simulation efforts and capability, and we are looking for people that are passionate and knowledgeable about complex simulation challenges, and can bring expertise and guidance in this area.

Essential experience

• Systems Engineering
• Coding experience (MATLAB/Simulink)
• Experience in integrating heterogeneous models across different engineering disciplines
• Test and acceptance of integrated systems
• Experience across the Engineering Delivery Lifecycle
• Defence Industry knowledge of EW systems

Desirable experience

• Requirements Management (DOORS/Enterprise Architect etc.)
• Systems Modelling (UML/SysML)
• System Design Documentation
• Previous ex-Military experience with EW systems (operator, maintenance, support, or acquisition).

Our non-negotiables:

Due to the highly secure nature of the projects that you will be involved with, youmustbe:

• A UK National and eligible to work in the UK
• Eligible to obtain and maintain a UK GovernmentSC-levelsecurity clearance

Make an Impact at MASS

Join a talented, diverse team of engineers while getting hands-on with cutting-edge research, innovation, and systems development. Contribute to exciting projects and help shape solutions that make a real difference.

We put wellbeing first, offering mental health support, first aiders, and an extensive Employee Assistance Programme so our people can thrive and reach their full potential.

MASS is an equal opportunities employer. Join a friendly, inclusive workplace where your skills are valued, and your impact is real.

Apply todayto see how your career could grow with MASS!

Senior RF Test Engineer St Neots (PE19) - Permanent - Onsite

• £45,000 - £58,000
• 25 days annual leave inclusive of up to 3 days Christmas shut-down
• Buy or sell up to 5 days annual leave
• Annual Wellbeing allowance
• Two pension schemes to choose from
• Private Medical Insurance + discounts for additional family members
• Life Assurance scheme up to 4 x salary
• Share Save scheme
• Electric/Hybrid Car leasing scheme
• Cycle to work scheme
• Retail discounts
• Career development support

Come and join our expanding Electronic Warfare Operations Support Group (EWOS) which is made up of 60+electronic warfare specialists. From all manner of backgrounds, our engineers, scientists, and ex-military personnel combine their experience to help our customers achieve the true operational potential and help keep their people and platforms safe.

We are building anew team led by ourPrincipal RF Test Engineerat a state-of-the-art test andevaluationfacility at our head office in St Neots, Cambridgeshire.You willhelp plan and supportdomestic and international trialswithin the facility,while working with both present and future technology.You will become a SME in the operation of software and hardware models, applying doctrinal methods to simulation scenarios.

You will play a crucial part integrating, configuring and verifying performance of a wide range of components used within a laboratory environment. This will involve the generation of test programmes using a variety of test equipment.

You will assist in running laboratory trials, ensuring customers can validate the performance of assets within a synthetic test environment.

Working autonomously,you will be crucial to ensure the success of key projects, all whilst being supported by our on-site MASS teams. This role works closely with our customers and your knowledge and technical insights will help shape planning, development, integration, and delivery of crucial national and international synthetic trials.

The invaluable experience youll bring, to help us achieve more.

Essential:

• Experience creating test scripts/programmes (e.g. MATLAB, Python, or LabView).
• Understanding of synthetic testing environments.
• Operation of test equipmentin a laboratory environment (e.g. Oscilloscopes, Signal Generators, Spectrum/Network Analysers).
• Experience with Direct Signal Injection (DSI) testing.
• Experience of analogue and digital RF circuitry.
• Strong background in EW systems and concepts, including radar systems.
• Working autonomously and tasking junior engineers.
• STEM Degree or extensive relevant experience / technical aptitude.

Desirable:

• Doctrinal experience with EW systems (e.g. radar, command and control, targeting and effectors).
• Experience Integration/calibration of hardware and software models into a laboratory environment.
• Creation of laboratory procedures.
• Version controlling hardware and software components.
• Experience working on agile projects.
• Experience mentoring junior engineers.

Wellbeingis at the core to our culture, allowingemployees to flourish and to achieve their full potential. Our people are important to us, and we take pride in our wellbeing programmes and policies that supportindividuals including, mental health first aiders and readily available support through our extensive employee assistance programme.

Our Non-negotiables:

Due to the highly secure nature of the projects that you will be involved with, youmustbe:

• A UK National and eligible to work in the UK
• Eligible to obtain and maintain a UK GovernmentSC-levelsecurity clearance

Apply todayto see how working for MASS could work for you!

Our client, a leading name in global financial markets, is expanding its Communications Surveillance and Record Keeping Technology function in response to increasing regulatory scrutiny. With regulators worldwide elevating expectations around Market Abuse monitoring and robust Record Keeping controls, this is a critical and high-profile hire.

We are seeking an exceptional Principal Engineer to play a central technical leadership role within their Surveillance Technology team. This is an opportunity to influence strategy, shape engineering standards, and drive innovation across a complex, business-critical technology landscape.

The Opportunity

Communication Surveillance and mobile capture capabilities now sit at the forefront of internal and external regulatory enquiries. As the Principal Engineer, you will act as the technical authority for a major Communications Surveillance Technology programmeleading architectural decisions, engineering best practice, and the design of next-generation solutions.

This role is ideal for a senior technologist who is hands-on, passionate about Surveillance and Record Keeping technologies, and capable of influencing cross-functional teams in a fast-moving environment.

Key Responsibilities

• Serve as the primary technical leader within the Surveillance Technology team.
• Provide expert oversight across analysis, architecture, design and delivery of complex systems.
• Architect, build, and evolve scalable, high-performance solutions for Communications Surveillance and Record Keeping.
• Lead engineering standards: architecture reviews, vendor assessments, impact analysis, and automated testing.
• Mentor and develop engineering talent, fostering a culture of continuous learning.
• Champion innovation by evaluating new technologies and methodologies within Surveillance and Record Keeping.
• Translate complex technical concepts for both technical and non-technical stakeholders.
• Support agile planning, estimation and prioritisation.
• Identify opportunities for system optimisation, refactoring, and alignment to target architectures.
• Manage technical risks, issues and dependencies.
• Benchmark against peer organisations to ensure alignment with regulatory and industry expectations.

Experience & CompetenciesEssential

• Proven experience within Communications Surveillance Technology.
• Strong background in technical leadership within software delivery teams.
• Hands-on expertise across the full software development lifecycle.
• Deep knowledge of at least one leading Communications Surveillance platform.
• Familiarity with Regex, SQL, and Boolean search concepts.
• Strong understanding of distributed systems, information security, and cloud technologies.
• Experience with major communication platforms and capture solutions (e.g., Bloomberg, LSEG, ICE, Symphony, whats app, WeCom, Smarsh, Global Relay, Behavox).
• Experience with communications data structures, ETL/ELT pipelines, and data integrity standards.
• Strong understanding of CI/CD practices and agile methodologies.
• Excellent communication and stakeholder-management skills.

Desired

• Understanding of financial markets or trading systems.
• Knowledge of FCA Market Abuse Regulation.
• Experience in performance optimisation and profiling.
• Familiarity with modern UI frameworks (React, Typescript).
• Exposure to containerisation and orchestration tools.
• Understanding of architectural frameworks and best practices.
• Knowledge of AWS or other cloud platforms.

Our growing engineering clients based close to Havant have an exciting opportunity for a Design & Compliance Engineer to join their growing team.

The Design & Compliance Engineer will play a key role in the design, development, and certification of the companys product portfolio.

This position combines hands-on product design engineering with regulatory compliance integration, ensuring products are technically robust, manufacturable, and fully certified to relevant UK, European, and international control standards. The role is design-led and technically focused, supporting products from early concept generation through detailed design, testing, certification, and ongoing lifecycle management.

Duties & Responsibilities:

• Develop new product concepts and engineered solutions aligned with performance and market requirements.
• Produce detailed 3D models and assemblies using CAD software.
• Generate accurate manufacturing drawings, including tolerances, materials, and fabrication details.
• Conduct design reviews and iterate concepts based on performance, cost, and manufacturability.
• Support prototype development and hands-on evaluation.
• Contribute to value engineering and continuous product improvement initiatives
• Research new materials, mechanisms, and system improvements to enhance performance and reliability.
• Support feasibility studies and concept validation testing.
• Develop technical solutions that balance innovation, compliance, and manufacturing practicality.
• Interpret and apply relevant British, European standards relevant to the business
• Embed compliance requirements into product designs from early development stages.
• Plan and coordinate internal validation and third-party testing.
• Liaise with accredited test laboratories regarding technical submissions and test setups.
• Support New Product Introduction (NPI) processes from concept through production release.
• Ensure compliance and testing milestones are integrated into development timelines.

Required Skills & Experience:

• Demonstrable experience in product design and development within an engineered product environment.
• Strong 3D CAD modelling capability (assemblies, mechanisms, and detailing)
• Experience managing projects
• Knowledge of design for manufacture (DFM) principles.

Working hours:8am 4:30pm Monday Thursday 8am 2pm Friday

Are you an Electrical Design Engineer looking for your next contract opportunity? If so, please read on…

Location: Gloucester
Duration: 6 month initial
Rate: £43-48 per hour (Outside IR35)

We’re working with a leading consultancy delivering major data centre projects and are looking for an Electrical Design Engineer to join the team on a contract basis.

This is a great opportunity to get involved in large-scale, mission-critical facilities, working alongside experienced multidisciplinary teams in a fast-moving environment.

Essential Skillset:

• Electrical Design Engineer with data centre / mission-critical experience
• Strong background in power systems and resilience strategies
• Experience with tools such as AutoCAD, Revit, ETAP, Amtech, SKM or similar
• Strong communication skills and a proactive approach

Key responsibilities:

• Electrical design from concept to detailed design
• LV/HV systems, UPS, generators, switchgear, and power distribution
• Producing calculations, drawings, and technical documentation
• Coordinating with multidisciplinary teams and supporting delivery

If this is something of interest please get in contact with Alex Hooton at JAM recruitment as soon as possible.

Job Title: M&E Maintenance Engineer (Water Systems experience)

Location:Colchester, Essex

Package:£45,000

Working Hours:Monday to Friday, 8am - 5pm or 9am 6pm (Out of Hours On-Call Rota 1 in 3 weeks, £100 standby)

About the Role:

We are seeking a skilled and motivated Maintenance Engineer to join my clients team, covering a commercial site in Colchester. This is an exciting opportunity for an experienced engineer to be part of a dynamic and well-established company that values quality and customer satisfaction.

Key Responsibilities:

• Carry out Planned Preventative Maintenance (PPM) and reactive tasks on mechanical, electrical and water systems.
• Perform inspections and checks to building equipment and systems such as generators, AHU/FCUs, motors, pumps, LTHWS etc.
• Perform maintenance and tests on fire alarms, emergency lighting, sprinklers, TMVs, cooling towers, calorifiers and other compliance.
• Monitor and manage BMS
• Diagnose and resolve M&E faults quickly and efficiently.
• Ensure all work is carried out in compliance with health and safety regulations.

Requirements:

• Level 3 equivalent in an Engineering related field Mechanical or Electrical discipline
• Water Treatment/Systems or L8 Experience
• Proven experience in a similar building maintenance role.
• Enhanced DBS will be carried out

If you feel you will be a great match to this position, please call James at The Invictus Group on 07375533362.

An exciting opportunity has arisen for a Senior Validation Engineer in Newcastle upon Tyne to join a highly visible, cross-functional engineering team supporting new product development and product continuation.

This role is ideal for an engineer with experience in validation, verification, and compliance testing of power electronic systems, looking to work on cutting-edge technologies such as motor drives, SMPS, and DC-DC converters.

About the Role in Newcastle

As a Senior Validation Engineer, you will be responsible for ensuring that newly developed electronic products meet all regulatory and compliance standards, including CE marking and UL certification.

You will work closely with hardware, software, mechanical, and systems engineering teams, as well as project and quality management, to deliver robust, compliant products.

This role combines hands-on engineering work (test setup, debugging, building test rigs) with technical documentation and planning, making it ideal for someone who enjoys both practical and analytical work.

Key Responsibilities

• Develop and execute Validation & Verification (V&V) test plans for new products
• Define and document test procedures, criteria, and compliance requirements
• Perform testing on power electronic systems (motor drives, SMPS, DC-DC converters)
• Set up and configure test environments, equipment, wiring, and loads
• Conduct EMC, electrical safety, vibration, and IP rating testing
• Analyse results and determine pass/fail compliance status
• Support certification processes including CE Marking, UL, and regulatory approvals
• Troubleshoot and debug electronic circuits, PCB assemblies, and systems
• Collaborate with cross-functional teams to resolve issues and improve designs
• Liaise with external test laboratories and certification bodies
• Produce detailed test reports, traceability documentation, and compliance records
• Identify and manage technical risks and support product release decisions
• Support continuous improvement of validation processes and test coverage

Skills & Experience Required

• Proven experience in a Validation, Test, or QA Engineering role
• Hands-on experience with power electronics systems
• Strong understanding of EMC, electrical safety, and regulatory compliance testing
• Experience working with high-voltage DC systems (200V-800V) (desirable)
• Knowledge of switching power converters and circuit analysis
• Experience with design of experiments and structured testing methods
• Familiarity with ESD/EMC principles and best practices
• Strong troubleshooting and debugging skills
• Excellent organisational and documentation skills
• Ability to work independently and manage multiple priorities

Qualifications

• Bachelor’s degree in Engineering (ideally Power Electronics or Electrical Engineering)
• Provable experience in system-level validation or test engineering
• Knowledge of quality standards such as ISO 9001, TS16949, or ISO 26262
• Familiarity with regulatory standards such as:
• EN1175
• EN13849
• UL 583
• EN12895

Key Competencies

• Strong analytical and problem-solving ability
• Excellent communication (written and verbal)
• Proactive and self-driven approach
• Attention to detail and quality-focused mindset
• Ability to work in a cross-functional engineering environment
• Awareness of health & safety best practices

Why Join This Engineering Team in Newcastle?

• Work on cutting-edge power electronics and advanced engineering systems
• Be part of a highly collaborative and visible engineering function
• Gain exposure to global regulatory standards and certification processes
• Combine hands-on lab work with technical leadership and strategy
• Opportunities for career development and progression

If you are keen and would like to find out more information on this Senior verification Engineer opportunity in Newcastle, please send over an updated cv to or call 01582 878839 for more details.

About The Role
Right across infrastructure, theres a requirement to not only maintain, but also renew and reimagine. Whatever stage youre at in your career, with us youll have an opportunity to grow and develop. Delivering essential infrastructure services for life, while being safety first, and client and customer centric in afriendly, fun and respectful environment where you are encouraged to thrive.
Where will you be working?
Aviation- Our Aviation team works across a wide range of specialist civil, mechanical and electrical engineering works including major international airports, regional airports and RAF airfields.
Want to come and be a part of it?
What will you be doing?

• Support Project Managers in delivering airfield and aviation infrastructure projects to safety, quality, time and cost requirements.
• Coordinate site activities, subcontractors and suppliers, ensuring compliance with industry and regulatory standards.
• Assist with project planning, progress reporting, risk management and stakeholder communication.
• Prepare and maintain project documentation, including programmes, method statements and quality records.
• Contribute to procurement, cost tracking and change management processes.
• Aid pre-construction tasks such as tender support and estimating inputs where required.

What youll bring

• Experience in project management within construction, infrastructure or aviation environments.
• Preferably pre-construction and/or estimating experience, including supporting tender inputs.
• Strong organisational, communication and stakeholder-management skills.
• Ability to work in safety-critical, regulated airfield environments.
• Proficient with project management tools and Microsoft Office.
• Relevant qualification in construction, engineering or project management (or working toward one).
• CSCS Card
• Full UK Driving License

Whats in it for you?
We offer a range of benefits designed to support your life in and outside of work, some of which include;

• Matched or contributorypension scheme
• Employee Assistance Programme
• Access to Mental Health First Aiders
• My Rewards portal, access to 1000s retail discounts
• Life Assurance
• Cycle to work scheme
• Enhanced maternity or paternity leave
• Reward and recognition scheme
• Online GP Service, 24 hours a day, 365 days a year

In addition, this role offers;

• Discretionary bonus scheme
• Recommend a friend get rewarded for introducing people to us!

Please note:Occasionally, we may close job adverts before the stated closing date. Wedencourage you to apply as soon as possible to ensure your application is considered.
For certain roles, successful candidates will be subject to 3rdparty background checks as part of our hiring process.Some of our roles require drug and alcohol testing as part of our induction.
#MGroupR&A INDSTA