The TGW Retrofit team are looking for an experienced controls engineer to join the department as a Lead Commissioning Engineer

You will be working closely with the controls project manager to develop and provide control system functions for retrofit projects. These projects can range in value up to a few million pounds and really need an experienced controls engineer to take the reins and ensure the engineering is completed on time and to spec.

You’ll be working on roles across Northern Europe and will likely enjoy the rush of working on multiple smaller projects vs one large one at a time.

WHAT YOULL BE HANDLING

• To understand design requirements and undertake mathematical analysis where necessary to produce concept designs for materials handling machines. This process will involve collaboration with other departments within the business such as Sales, LTS, Realisation and System Integration Management Teams.
• To work with systems and hardware design teams, to produce functional electro-mechanical layouts and electrical panels. These designs may require the introduction of new technologies.
• As a key member of a small team. We need to be diverse in our job functions. There will be opportunities to carry out SYEC work and HWEC work. Training will be provide in both these disciplines.
• Define and agree interface points and requirement with Warehouse Management System Teams.
• Develop software concepts and PLC\HMI code using mainly but not restricted to Siemens Step 7, and Siemens TIA Portal
• To emulate and test PLC code were required.
• To develop interface requirements for WCS systems, HMIs and SCADA
• Test, evaluate and perfect the PLC software and produce documentation and design guides so that the PLC commissioning teams can understand and implement this software.
• To maintain revision control across PLC code libraries developed by the team and to document all changes
• Where needed, work as part of the commissioning team on retrofit projects to ensure knowledge transfer is complete and all issues have been resolved with the newly developed PLC code.
• To promote and steer company standards and ensure best practise is implemented in the design.
• Good Housekeeping skills including revision control, as-built documentation etc.
• As part of working within a smaller specialised team, such as the retrofit team is, you will also undertake certain elements of System and hardware Engineering and at times carry out some minor project management duties. All training will be given for you to fulfil these tasks, if you are required to do such work.

WHAT YOULL NEED

Required

• Ability to design/develop PLC code ideally using Siemens S7 (300/400) & TIA software including complex application and bespoke interfaces.
• To be able to take customer / TGW requirements and produce detailed design documentation.
• Extensive experience of commissioning and testing in an engineering / industrial environment.
• Detailed understanding of control system hardware, networks, fieldbus and industrial drives etc.

Desired

• Knowledge of functional safety programming.
• Background in Material Handling/Conveyor Industry or similar industry.
• Ability to design/develop HMI / SCADA.
• Previous experience of working with motion control via servo drives.

We Offer a very competitive base salary plus car allowance, 25 days holiday, income protection, medicash, buy and sell holiday scheme and car salary sacrifice scheme.

Ormskirk, Wigan

£20-£22 per hour + Training + Company Vehicle + Overtime + Door to Door Pay + Days Based

Are you a Mechanical Maintenance Engineer looking to progress your career with an expanding nationwide supplier of tractors and machinery who offer a company vehicle, door to door and significant overtime to boost your earnings?

With nearly 50 years of industry experience, this company specialises in Fendt and Massey Ferguson machinery, supplying both new and used tractors alongside a comprehensive range of parts, ground care equipment, and tools. Due to continued growth and ongoing success, they are now looking to expand their close-knit engineering team, supporting and servicing their own supplied equipment.

This is a varied, hands-on role offering the perfect balance between workshop and field-based work. You’ll split your time 50/50 between the depot and customer sites across Lancaster, diagnosing, servicing, and repairing a wide range of tractors and agricultural machinery. At the depot, you’ll carry out planned maintenance in your own dedicated workspace, while in the field, you’ll respond to breakdowns and deliver expert support directly to customers

Offering a high level of autonomy, this role is ideal for someone who enjoys working independently in a dynamic environment looking to join a growing family-run company who pride themselves on rewarding their employees.

The Role:

• Fault finding, Servicing and Repairing machinery
• Split between the depot and sites (50/50 split)
• Door to Door pay with site visits starting from home
• Overtime at 1.5x
• Mon-Fri 8-5

The Person:

• Mechanical Maintenance Engineer
• Plant, Hydraulics or Agricultural background
• Commutable to Ormskirk - Happy to cover Lancashire

Mechanical, Engineering, Hydraulics, Plant, Agricultural, Ormskirk, Lancashire, Wigan, Depot, Site Visits, Repair, Diagnose, Service, Days Based, Company Car

Reference Number: BBBH24519

If you are interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

About a career with Elis
a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
Are you an experienced engineering professional ready to step into a leadership role? We are looking for a proactive and influential Lead Engineer to join our Leicester site, supporting the Engineering Manager and leading the engineering team to deliver exceptional operational performance.

a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
As Lead Engineer, you will act as the Engineering Manager’s deputy, supporting the leadership, development and coordination of the site’s engineering function. You will work closely with Production to improve Overall Equipment Effectiveness, deliver safe and efficient engineering operations and lead continuous improvement across the site.

Your Mission at Elis
a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
Leadership & Team Support

• Lead and support the engineering team, providing hands-on technical guidance and mentoring.
• Deputise for the Engineering Manager, including managing activities and budgets in their absence.
• Ensure PPM schedules, corrective works, SSOWs and engineering procedures are consistently followed.
• Support training delivery for engineers and operators on new equipment.

Compliance, Safety & Standards

• Ensure adherence to company Vision, Values and QHSE policies at all times.
• Support in ensuring compliance with risk assessments, COSHH, RIDDOR and all regulatory requirements.
• Promote a strong safety culture and ensure appropriate safety training is in place and completed.
• Contribute to maintaining relevant site accreditations (e.g. ISO/EN14065).

Continuous Improvement & Operational Excellence

• Work collaboratively with Production to improve equipment performance and OEE.
• Lead site improvements around sustainability and WECO reduction.
• Support installation, testing, operation and maintenance of all facilities and equipment.
• Source parts and machinery through approved suppliers.

What will make you stand out?
{ text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }

a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; } a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }

Skills & Knowledge
We are looking for someone with:

• Excellent verbal and written communication skills.
• Strong analytical abilities with the confidence to influence at all levels.
• Ability to build strong working relationships and drive teamwork.
• Strategic thinking and commercial awareness.
• Strong IT skills (Microsoft Office).
• Ability to motivate teams and drive performance culture.
• Financial acumen relating to budgeting and forecasting.

Education & Experience
Essential:

• Proven experience in industrial maintenance or production.
• Previous supervisory or management experience.
• Operational maintenance experience.
• Degree/HND/HNC/NVQ Level 3/City & Guilds in a relevant engineering discipline or time-served apprenticeship (electrical/mechanical/steam).
• Experience implementing continuous improvement programmes.
• Experience in energy and sustainability management.

Desirable:

• NEBOSH/IOSH/QHSE qualifications.
• Bi-lingual capability.

What’s on offer?

• 33 Days Holiday
• Company Pension
• Employee Assistance Programme
• On-site Parking
• Life Assurance
• Private Medical

a { text-decoration: none; color: #464feb; } tr th, tr td { border: 1px solid #e6e6e6; } tr th { background-color: #f5f5f5; }
This is an exciting opportunity to step into a leadership role where you will directly shape engineering standards, safety culture and operational performance at our Leicester site. If you’re driven, technically strong and ready to lead a skilled team, we’d love to hear from you.

Interested?
Then apply online! Your contact person:

Helena Fearnley-Brown

Tel:

We are currently recruiting for a Mechanical Maintenance Engineer at a major manufacturing and distribution site in Bradford on a permanent basis.

Salary is c£42,000 per annum (negotiable, depending on experience) plus 24 days’ holiday (rising with service years) and bank holidays, company bonus, pension etc.

About the Mechanical Maintenance Engineer role:

Reporting to the Operations Manager, you will be responsible for carrying out mechanical and electrical maintenance and breakdown repairs on production plant and equipment, while supporting the overall reliability and performance of the site.

Key Responsibilities

• Plan and carry out preventative maintenance activities to maximise plant reliability.
• Undertake both planned and emergency repairs in a safe and timely manner.
• Accurately record maintenance work using the companys maintenance system (SAP/CMMS).
• Follow industry best practice and all site safety procedures.
• Prepare Risk Assessments and Method Statements for engineering activities.
• Work alongside contractors during planned maintenance periods.
• Manage and maintain stock levels of spare parts and consumables.
• Carry out fault-finding and diagnostics during breakdown situations.

To be successful in this Mechanical Maintenance Engineer role, you should have:

• A recognised apprenticeship in Mechanical Engineering.
• Experience within a processing, production, or manufacturing environment.
• Some experience of electrical maintenance.
• Strong written and verbal communication skills.

Experience of using a CMMS/SAP system and working within structured health and safety processes would be beneficial, but full training will be provided.

How to apply for the Mechanical Maintenance Engineer role:

Please call Rebecca at Simply Recruitment Group or press APPLY NOW!

Cabling Installation Engineer, Bristol
Join our front-line installation team to work on both Business As Usual (BAU) and project-based tasks, delivering communication infrastructure solutions at customer sites. This role includes hands-on work such as cabling, network switch installation, and patching. Onsite training and a clear career development path will be provided based on experience.
Key Responsibilities:

• Network cabinet installations
• Installation of primary and secondary containment systems
• Installation of fibre and Cat6/Cat6A horizontal cabling solutions
• Termination, testing, and labelling of fibre/Cat6/Cat6A solutions
• Network switch installation
• Copper and fibre patching

Requirements

• Experience terminating copper/fibre cabling (Cat6/A)
• Experience of testing both fibre optic and copper cables using OTDR/ Fluke Testers
• Good knowledge of current installation practices
• Experience in the installation of containment systems (both Steel and PVC)
• Experience in running cables internally and externally
• Fibre splicing
• Focused and able to work within a team and independently.
• Good communication skills

Qualifications

• CNCI Certification or City & Guilds 3667 is a bonus
• PASMA Certification
• ECS / CSCS / EUSR Certification
• IPAF Certification

If you have the required experience and skills, and are looking for an opportunity to grow in a dynamic team, wed love to hear from you!

Commercial Gas Installation Engineer – Projects Division
£45,000–£50,000 Basic + Overtime (OTE £70,000+)
National Role | Fully Remote | UK Travel Required

We’re proud to be partnering with a reputable FM service provider to recruit a highly skilled Commercial Gas Installation Engineer to join their growing Projects Team.

This is an exciting opportunity for an experienced and hands-on engineer looking to step into a dynamic, client-facing role delivering large-scale commercial gas and HVAC installations across the UK. If you enjoy variety, autonomy, and working in a fast-paced, project-led environment — this role offers both challenge and long-term career progression.

The Opportunity

As part of a specialist Projects division, you’ll play a key role in the surveying, installation, and commissioning of commercial gas systems nationwide. This is a fully remote position with frequent travel and overnight stays, supporting project delivery wherever needed.

You’ll be working directly with clients, project managers, and engineering teams, ensuring installations are delivered safely, efficiently, and to the highest standards.

What You’ll Be Doing

• Delivering large-scale commercial gas installations in line with industry regulations
• Installing and commissioning a wide range of systems including boilers, warm air heaters, AHUs, and pipework systems
• Producing commissioning reports, technical documentation, and site calculations
• Supporting client relationships and attending project meetings
• Collaborating with internal teams and subcontractors to ensure smooth project delivery
• Mentoring junior engineers and supporting team development
• Identifying additional work opportunities and assisting with project scoping

What We’re Looking For

• Fully qualified Commercial Gas Engineer with a valid CSCS card
• Extensive experience working on construction sites and commercial installations
• Strong technical knowledge across HVAC and gas systems
• IPAF and Asbestos Awareness certified
• Full UK driving licence
• Confident working independently in a client-facing role

Desirable: OFTEC or LPG qualifications

What’s On Offer

• £45,000–£50,000 basic salary + significant overtime (OTE £70,000+)
• 33 days holiday (including bank holidays) + birthday off
• Private medical insurance (no excess)
• Dental & optical cashback scheme
• Life assurance (4x salary)
• Enhanced family leave policies
• Ongoing professional development and training
• Comprehensive wellbeing support including EAP and virtual GP access

Why Apply?

This is a fantastic opportunity to join a well-established and forward-thinking FM provider where you’ll have real impact on project delivery. You’ll gain exposure to high-profile commercial work, develop your technical expertise, and progress within a supportive and growing business.

Interested?
Apply now or get in touch to learn more about this opportunity and how it could be the next step in your career.

London & South East | Full Time | £45,000 £55,000 + Benefits Are you an experienced Commercial Gas Engineer looking for a role where youre valued, supported, and given room to grow? Our client is a well-established, West London-based company delivering high-quality Commercial and Domestic Gas & Mechanical Services across London and the southern counties. They specialise in combining technical expertise with a forward-thinking approachembracing new technologies, climate-conscious solutions, and outstanding customer service. What Our Client Is Looking For They are seeking a motivated, friendly, and adaptable engineer whos open to learning and embracing new systems and technology. Essential Qualifications & Skills Commercial Gas ACS Qualifications: CCN1, CENWAT, CPA1, CKR1, HTR1, CODNCO1, ICPN1, TPCP1A, CIGA1, CORT1 Valid UK Driving License (clean and full) Motivated and adaptable engineer Friendly with a positive attitude Open to learning and embracing new systems and technologies Beneficial (Advantageous) Oil qualifications LPG qualifications What Youll Do As a Mobile Commercial Gas Heating & Plumbing Engineer, youll work across London and the southern counties, servicing and installing a wide range of systems. Occasionally, projects may require travel further afield, with overnight stays when necessary. Key Responsibilities Service and repair of Commercial and Domestic Heating & Mechanical Plant Equipment Fault-finding on Commercial and Domestic Gas Systems Reactive maintenance and attending breakdowns Installation of new heating, hot water plant, and mechanical systems Pipework installation and commissioning Client interaction this is a customer-facing role where professionalism matters Whats In It For You Overtime Opportunities: Paid at 1.5x after 47.5 hours per week Career Progression: Structured training, paid certifications, and development opportunities to advance your career Work Variety: Engage in a diverse range of projects, including high-end residential properties, retail outlets, warehouses, leisure centres, schools, hospitals, offices, and more Supportive Team Culture: Were a friendly, growing team that invests in its people 25 Days Annual Leave + Bank Holidays (plus one additional day per year of service, up to 10 extra days) Performance Bonus Scheme Private Medical Insurance Company Van & Fuel Card Uniform, Tools, Phone and/or Tablet Provided Pension Scheme Ongoing Training & Development including the latest technologies and market innovations Apply Today If youre looking to join a supportive, forward-thinking company where your skills are recognised and valued, wed love to hear from you.

Position: Air Conditioning Engineer Location: Covering Suffolk Duration: Permanent Salary: From £40,000 to £44,000 subject to experience level We are looking for an experienced Air Conditioning Engineer for a full time, permanent position covering the Suffolk region. This position will be working for a very well established building services company that have commercial clients all over Suffolk This position will be dealing with the service, maintenance and breakdown of splits, multi splits, vrvs and vrfs. They will also be working alongside the multi skilled engineers and supporting them with planned maintenance when required This is a mobile position, so we do require a full UK driving licence Requirements Strong background in Air conditioning Able to deal with service, maintenance and breakdown Based in or around the Suffolk area Full UK driving licence Must have Fgas Cat1 Happy to do some building service maintenance Package Excellent basic salary Company van 22 days holiday plus bank holidays Travel time On call allowance No London work If you are interested in this position please send your CV or contact Wendy Evemy ASAP

Field Service Engineer - Yorkshire

Salary: £41,500 Base, 60K OTE | Day Shifts | Permanent

We are seeking a skilled Field Service Engineer to join our growing engineering team, covering customer sites across Yorkshire.

This role is ideal for an engineer with a strong industrial background, particularly within environments such as print, paper, recycling, plastics, injection moulding, or similar manufacturing sectors. Experience in food or pharmaceutical manufacturing is highly desirable, though strong engineers from other regulated or industrial environments are encouraged to apply.

The role will require you to travel to customer sites accross the Yorkshire area carrying out planned and reactive maintenance on highly technical automated machinery. The base salary is for your core hours but the nature of the role will require you to work overtime on a regularlar basis as the company ethos is set around your day is done when your work is done, with this is mind your realistic OTE will be around 60k, all travel and expenses are also paid for.

Non-Negotiable Requirements of the Field Service Engineer

• Multi-skilled maintenance experience within an industrial manufacturing environment.
• Electrical and mechanical fault-finding experience.
• Engineering qualification (Electrical or Mechanical).
• Experience working within a manufacturing environment.

Requirements for the Field Service Engineer.

• Previous experience working as a Maintenance or Service Engineer in the UK.

• Experience with working on PLC’s, ideally being able to fault find using inputs and outputs

The Field Service Engineer will benefit from:

• Working for a recognised market-leading business.
• Excellent benefits package including pension and uncapped earnings
• Training and development opportunities for engineers.

If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.

For further details contact Chris Bacchus at Pioneer Selection

As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

£40,000 - £45,000 + OTE £60K + Overtime + Company Van + Door to Door Pay + External Training
Kirkby

Are you an ambitious Electrical service Engineer with a background in Switchgear systems looking to progress into a challenging and varied role, where you will be the go-to technical expert on critical power systems?

On offer is the chance to join a market leading company, who offer elite external training courses with Schneider Electric and the opportunity to progress to supervisor and lead engineer positions.

This role will involve national travel to a variety of clients sites in the oil, gas, nuclear and petrochemical industries. You will be responsible for servicing, inspecting and testing industrial switchgear units, undertaking general repairs and fault finding on thermal imaging and protection relays.

This market leading company have been operating for over 20 years and cover high profile clients across UK. They focus on planned and emergency repairs for critical power systems and take pride in being a trusted provider for these bespoke services.

This role would suit an Electrical Service Engineer with a background in high voltage switchgear, looking to join a market leading company, who provide premium training opportunities and scope to progress to supervisor positions.

The Role:

• Travel the UK servicing, inspecting and testing industrial switchgear units
• Perform general repairs and fault finding on electrical components
• Undertake protection relay testing, retrofit solutions and thermal imaging inspections
• Mon-Fri, 8-5, 38 hours per week. Overtime available paid at 1.3x

The Person:

• Electrical Service Engineer
• Background in Switchgear
• Happy to cover a UK patch and stay away

Job Reference: BBBH 24572

High Voltage, Low Voltage, Switchgear, Electrical, Engineering, Engineer, Commissioning, Testing, Inspecting, Maintenance, Cables, Industrial, Warrington, Birkenhead, Runcorn, Liverpool

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

Project Engineer (Civils) - Nuclear / Power Generation

We are currently recruiting for an experienced Project Engineer (Civils) to join a high-performing Nuclear Power Engineering and Technical Services team, supporting a major UK energy client across its nuclear fleet.

This is a key role within a diverse and expanding project and engineering portfolio spanning multiple UK sites. You will be given the opportunity to work alongside experienced project engineering professionals, with ongoing mentoring, training, and clear development pathways into more complex and senior project leadership roles.

The position will be based primarily at Sizewell B Power Station, working as part of a large, client-led team. While some flexible working may be available, the role is predominantly site-based.

Key Responsibilities

Produce and maintain engineering documentation, including quality plans and technical specifications

Manage technical queries in line with established processes and procedures

Support contractor selection processes and contract placement activities

Conduct technical reviews of contractor documentation, drawings, and project options

Perform feasibility studies, site surveys, and liaise with designers and station engineering teams

Prepare and manage Engineering Changes, including all supporting and impacted documentation

Develop commissioning documentation and act as Test Team Leader where required

Support the Project Manager and Construction Manager to ensure safe, timely, and effective project delivery

Ensure all activities are carried out in compliance with safety, environmental, and quality standards

About You

Strong communication and organisational skills with the ability to collaborate effectively across teams

Proactive, detail-oriented, and able to manage multiple priorities in a regulated environment

Demonstrates a strong commitment to safety and quality

Qualifications & Experience

Typically Chartered Engineer status or HND qualified

SMSTS (Site Management Safety Training Scheme) qualification

Formal project management qualification (preferred but not essential)

Experience working within CDM regulations and delivering construction projects

Proven ability to comply with safety, environmental, quality, and regulatory standards

Desirable Experience

Experience in electrical power systems design and installation (e.g. National Grid, supply/distribution systems)

Previous experience working on power stations or nuclear licensed sites

Experience working in highly regulated environments with stringent safety standards

London (Field Based)

£45,000 - £55,000 + Unlimited Overtime + Company Van + Paid Travel (D2D) + Tools Provided + Call Out Bonus

Are you a Pump Engineer or similar, looking for a role in a well-established and growing Drainage and Pump System contractor, who has been in the sector for over 20 years, who offers great earning potential through unlimited overtime?

Do you want to work in a role with massive earning potential with unlimited overtime throughout the working week, available both weekdays and weekends, with the further benefits of a fully kitted out van with paid travel (D2D), in-house training, and career progressions into team lead roles?

On offer is a great opening at an established and expanding Drainage and Pump system contractor, who have won countless contracts leading to significant growth, who champion and value their employees through achievable career progression, a company van with door-to-door paid travel, and excessive earning potential through generous overtime availability and rates.

In this role you will be responsible for servicing, installing, and fault finding on a variety of Pump systems, predominantly booster and circulating pumps. You will also be responsible for servicing submersible and industrial pumps, as well as vacuum systems.

This role would suit a Pump Engineer or similar, looking for a role with massive earning potential through unlimited overtime, with the added benefits of a fully kitted company van with paid travel (D2D), scalable career progression opportunities into team lead roles.

The Role

• Servicing, repairing, and fault finding on a variety of Pump systems
• Covering a London patch
• Company van with door-to-door paid travel

The Person

• Pump Engineer or similar
• Happy to cover a London patch
• Full UK driving license

BBBH24282

Key Words: Pump Engineer, Pump, Engineer, Drainage, Drainage Engineer, Engineering, Water Systems, Vacuum Systems, Circulating Pumps, Booster Pumps, Watford, Hoddesdon, Edmonton, London

If you are interested in this role, click ‘Apply Now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found on our website.

Location: Field-based across Shrewsbury, Wrexham, Ludlow
Contract: Self Employed / Associate / Zero Hour
Day Rate: Competitive, DOE

Join a global leader in safety, inspection, and certification services!

DEKRA Automotive is part of a worldwide business employing over 49,000 people in more than 60 countries. We provide expert, independent inspection services to ensure safety on the road, at work, and at home. In the UK, we are one of the fastest-growing independent vehicle inspection companies, working with an expanding portfolio of B2B clients.

We are looking for experienced Vehicle Inspection Engineers to work with us on a self-employed basis, conducting high-quality vehicle inspections across Shrewsbury, Wrexham, and Ludlow!

The Role

As a Self-Employed Vehicle Inspection Engineer, you will carry out a variety of inspection types including pre-purchase inspections and warranty evaluations to the highest possible standard. You will work to pre-arranged appointments coordinated by our Stokenchurch-based deployment team, ensuring timely, professional, and accurate reporting.

Your responsibilities will include:

Completing thorough, accurate vehicle inspections in line with company standards.
Producing detailed, unambiguous inspection reports using company templates.
Maintaining professionalism and excellent customer service at all times.
Supporting pilot programmes and new customer initiatives when required.
Travelling within your designated area and occasionally beyond when necessary.

About You

We’re looking for skilled technical professionals with:

A minimum of 7 years’ experience in formal vehicle maintenance, servicing, or MOT.
City & Guilds Level 3 or HNC/HND equivalent qualification (IMI or IRTE membership desirable).
Strong customer service, communication, and organisational skills.
The ability to write clear, detailed, and accurate reports.
A methodical, analytical approach to inspections and decision making.

You must also have:

A clean UK driving licence, your own transport with business use insurance
Your own tools, and equipment in good working order.
A limited company with Public Liability and Professional Indemnity insurance

Why Work with DEKRA

Flexibility to work on an as-needed basis.
The backing of a respected, global brand.
Opportunities to work with a wide range of vehicles and clients.
A role where your expertise directly supports safety and quality.

Ready to join an industry leader and put your inspection skills to work

Apply today to become part of DEKRA’s growing network of specialist engineers!

Installation & Commissioning Engineer Special Purpose Machinery Leicester £55,000 £65,000 + Overtime + Bonus + Pension + 25 Days Holiday Are you an Installation & Commissioning Engineer looking for a role where you can work on complex, high-tech machinery installations both in the UK and internationally? Do you want the opportunity to take projects from final build through to commissioning and customer handover while developing your technical expertise? The company is a growing special purpose machinery manufacturer delivering advanced automated systems to a range of industries. Due to continued growth and project demand, they are looking for a Commissioning and Installation Engineer to join their expanding engineering team. In this role you will be responsible for installing and commissioning bespoke machinery both at the companys Leicester facility and on customer sites. You will work closely with the design, build, and controls teams to ensure systems are installed, tested, and fully operational before final handover to the customer. This is a varied position where you will be involved in mechanical installation, machine setup, troubleshooting and final commissioning of complex automated equipment. You will also support customer acceptance testing and provide technical input to improve machinery performance and reliability. The Role \*Pre-commissioning and testing equipment \*Installation and commissioning on customer sites worldwide \*Electrical, mechanical and PLC systems and diagnostics \*Development of new bespoke machinery The Person \*Strong understanding of electrical, mechanical, pneumatic and hydraulic systems \*Background with manufacturing machinery \*Experience with PLC-based software systems \*Experience with on site installations and commissioning All in all, this is a fantastic opportunity to work on technically challenging machinery projects while gaining valuable commissioning and installation experience within a growing engineering business. If you do not hear from us within 10 days, then unfortunately your application has not been successful on this occasion. However, we may keep your details on file for any future suitable vacancies and contact you accordingly. Keywords:commissioning, installation, mechanical engineer, special purpose, machine build, automation, assembly, manufacturing, pneumatics, motors, gearboxes, automation systems, field service, machinery, technician, electrical, PLC

Redline has been retained by a leading instrumentation manufacturer who are looking for a Electronics Design Engineer to join their R&D team based in Surrey.

Due to significant growth, they are seeking an Electronics Design Engineer to be responsible for the design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.

The nature of the industry and products will require someone who is a British Citizen.

Key skills and experience for Electronics Design Engineer, based in Surrey:

• Proven experience within a hands on electronics design role
• Mixed signal design within a regulated industry i.e. Defence, Aerospace, Medical, Automotive etc.
• Experience in sensor design
• Degree qualified in a related Electronics discipline
• Firmware / embedded knowledge
• Excellent verbal and written communication skills

This is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.

My job

Mechanical Engineer
Location: Dungannon

We’re looking for a proactive Mechanical Engineer to join our Engineering team and keep our production lines running at their best. You’ll work independently, solve complex mechanical issues, and support continuous improvement across a fast-paced food manufacturing site.

What You’ll Do

• Deliver hands-on welding, fabrication, and mechanical repairs
• Work with mechanical drive systems, hydraulics, and pneumatics
• Carry out planned preventative maintenance and complete key documentation
• Diagnose faults and re-engineer equipment to improve performance
• Provide technical support and advice to production teams

What You’ll Bring

Essential:

• Time/skill-served Mechanical Engineer with industrial experience
• NVQ Level 3 (or equivalent) in a mechanical discipline
• Strong mechanical aptitude and problem-solving ability
• Experience in welding, fabrication, and mechanical drive systems
• Confident decision-making and good reasoning skills

Desirable:

• Food or poultry processing experience
• Knowledge of hydraulics and pneumatics
• Strong communication, organisation, and initiative

The company

Pilgrim’s Europe produces some of the best-known and most iconic brands in the UK and Ireland, including Fridge Raiders, Rollover, Denny, Richmond, Oakhouse and Moy Park, alongside a diverse range of industry leading own-label products in categories including fresh pork, lamb and chicken, working with all the major retailers and food service outlets.

Our portfolio extends to authentic chilled and frozen ready meals, snacking ranges, added value and food service products.

Across Pilgrim’s Europe we combine 20,000 of the best people in the industry, united by a shared set of core values and a passion for producing the highest quality, most delicious and innovative food, which is enjoyed by millions of people in the UK, Ireland and Europe every day. Our Pilgrim’s Europe team are based in our Pilgrim’s UK, Moy Park, Pilgrim’s Food Masters and Pilgrim’s Shared Services businesses.

What we’ll bring to the table

Competitive Salary

Competitive Holiday Entitlement

Pension Contribution

Family Friendly Policies

Learning and Development Opportunities

Life Assurance

People matter

Previous Next

Our values

Determination

Simplicity

Availability

Humility

Discipline

Sincerity

Ownership

Job Title: Rolling Stock Engineer (Nights) – Rolling Stock
Location: Derby
Contract Duration: Minimum 6 Month contract
________________________________________
The Opportunity
Our client, a leading organisation within the UK rail rolling stock sector, is seeking three Rolling Stock Engineers to join their team on a minimum 6-month contract, working nights at their Derby depot. Roles are inside scope of IR35.

This is an excellent opportunity for experienced engineers with strong fault-finding capability and technical reporting skills to support fleet reliability, performance, and maintenance delivery within a busy depot environment.

Working 20:00-06:00am (10 hour shift per night), 4 nights on a rolling week.
________________________________________
Key Responsibilities
• Provide technical support to depot maintenance teams during night shifts
• Carry out detailed fault finding and diagnostics on rolling stock systems
• Assist maintenance teams with complex and in-depth faults, sharing fault-finding techniques and supporting the effective use of schematics across rolling stock assets
• Lead and direct the maintenance shift in relation to engineering issues, technical decision-making, and governance compliance
• Support root cause analysis (RCA) investigations to improve fleet reliability
• Produce clear, accurate, and robust technical reports following incidents and failures
• Liaise with engineering, operations, and reliability teams to ensure timely resolution of defects
• Ensure all work is completed in line with safety, quality, and industry standards
• Contribute to continuous improvement and reliability growth initiatives
________________________________________
Essential Experience & Skills
• Proven experience working on UK rolling stock (mechanical and/or electrical systems)
• Strong fault-finding and diagnostic capability across complex systems
• Ability to interpret and apply technical drawings and schematics effectively
• Experience writing detailed, structured, and technically robust engineering reports
• Experience providing technical leadership within a depot or shift environment
• Good understanding of safety-critical environments
• Excellent communication, mentoring, and problem-solving skills
• Degree, HNC, or HND in Mechanical or Electrical Engineering (or equivalent)
________________________________________
Desirable
• Experience supporting fleet operations within a depot environment
• Knowledge of reliability engineering and failure analysis techniques

ServiceNOW Senior Technical Consultant

Location: Hybrid role with preference for candidates local to Erskine/London/Newcastle/Aldermaston locations

Salary: Dependent on Experience

Due to Security clearance requirements candidates must be UK nationals or sole British citizens and resided in the UK for 5 years and over.

DXC Technology is committed to building diverse, inclusive teams. We welcome applications from all backgrounds and particularly encourage interest from women, underrepresented groups, and neurodivergent candidates. We offer reasonable adjustments throughout the hiring process and are dedicated to creating a supportive, accessible environment for everyone

The role:

As a ServiceNow Senior Technical Consultant you will be part of an innovative team, working to develop world class customer solutions using the ServiceNow platform.

Provide technical consulting services to clients; contribute to the design and delivery of technical solutions including customizing package-based solutions, data design and conversion, technically-focused testing, and configuring technical infrastructure components; and serve as a technical resource on a team. You will develop and demonstrate specialized knowledge and skills in ServiceNow as an enterprise solution.

Focus on designing and implementing solutions on the ServiceNow platform. Provide guidance, thought leadership, and hands-on development to both our client and internal technical resources.

Responsibilities:

• You will be a part of a team of ServiceNow specialists delivering ServiceNow solutions to multiple customers.
• Participating in client workshops and requirements gathering to build requirements and design solutions. Advising and making recommendations on proposed solutions.
• Developing in ServiceNow the defined solutions to meet defined requirements to a high standard of quality, including configuration, scripting, testing, demonstrations to customers, UAT and go-live support.
• Mentoring and training more junior members of the team
• Producing documentation and training material for the implemented solutions.

Requirements:

The ideal candidate will have several years’ experience in ServiceNow design and development preferably in a consulting environment.

Scripting skills such as JavaScript, HTML and XHTML, XML, CSS, AJAX, AngularJS highly advantageous

An understanding of Service Management concepts, delivery assurance principals and procedures.

A high level of knowledge of the ServiceNow application and ideally experience of building custom applications and integrations with other platforms.

Ideally you will be have obtained some of the following certifications

• ServiceNow Certified Administrator
• Service Now Certified Implementation Specialist
• Service Now Application Developer
• ITIL Foundation

Additional specialist ServiceNow certifications or experience such as HR, CSM, FSM, Service Portal, CMDB, SAM, Discovery, ITOM, ITBM, PPM, would be an advantage

You will need to have strong communications both written and oral, ability to present solutions to customers including senior management and be highly

focused on providing strong customer service.

Able to work as part of a team or individually to project timelines, you will need to be pro-active, creative and able to research solutions and make recommendations, willing to learn and take on new challenges.

You will need to have the ability to work from home and also to travel to client locations for meetings and workshops or work on client sites for periods where required.

What we offer:

You will be joining one of the leading ServiceNow partners who strive to maintain the highest levels of attainment in ServiceNow. As such you will receive regular training and development opportunities and ability to achieve certifications to aid your personal development.

You will be joining a supportive and friendly team of consultants who share ideas, knowledge and creativity to ensure everyone succeeds in the provision of high quality, leading edge ServiceNow solutions

We provide a comprehensive Flex benefits scheme including Pension, Life Insurance, Health insurance, travel insurance, store vouchers/discounts, 25 days holiday and options to increase holiday and select benefits appropriate to you.

Come and join us as an Electrical Maintenance Engineer at our Denton in Greater Manchester! Wienerberger Ltd manufactures and provides wall, roof and landscaping products for the construction sector. We offer innovative and sustainable solutions across the whole building envelope for new build, renovation projects and across the building industry. About the role As an Electrical Maintenance Engineer (known internally as a Maintenance Electrician) at our Denton site, you will be part of our hands on inhouse team who keep the plant running by ensuring the equipment runs smoothly. From troubleshooting to planned preventive maintenance (PPM), you will be hands-on with specialist machinery, ensuring everything runs like clockwork.It's a dynamic role where problem-solving skills and technical expertise are used daily, and you will be a key player contributing to the efficiency and reliability of our production processes. Our engineers have a varied role, so youll get the chance to use a variety of electrical skills associated with being an electrician and service engineer. We will provide you with Personal Protective Equipment (PPE) to enable you to safely and effectively work as an Electrical Maintenance Engineer where you will Install and maintaining all electrical & electro-mechanical plant equipment or machinery Operating a preventative electrical maintenance system Faulting finding and repairs Program Siemens & other programmable logic controllers (PLCs) Use various types of testing equipment to locate and remedy faults Promote Lean thinking Attend breakdowns Contribute to safe systems of work (SSOW) documentation Adhere to Wienerbergers quality system & standards in accordance with BSEN ISO 9001 Thissiteproduces bricks, supporting our manufacturing of high-quality building materials across the UK. This position is based at our Dentonsite, which is near to Hyde, Audenshaw,Bredburyand Openshaw, easily commutable from Oldham, Stockport, Ashton-Under-Lyne, Mottram inLongendale, and Greater Manchester. Hours of Work: 42 hours per week. Shift pattern runs from Sunday to Saturday. The working pattern is 5 on, 1 off, 5 on, 1 off, 5 on, 4 off. About You You will be an electrically biased engineer with experience of working in a manufacturing / factory environment, with a minimum level 3 qualification in an Electrical Engineering discipline. Safety is our biggest priority, so youll be committed to safe working and have strong experience of health and safety best practice. Youll enjoy working in a busy environment where you can roll your sleeves up and get hands-on, and being flexible and able to adapt to the different daily priorities will enable the factory to continue to run efficiently. As this role is sometimes physically demanding, youll be fit enough to perform your various duties. Youll also have Strong team playing skills Good communication (written and verbal) Good working knowledge of environment, health, and safety (EHS) processes Analytical & problem-solving skills Diagnostics experience of electrical motors and pneumatics Experience and knowledge of PLCs (programmable logic controllers) Desirable 17th / 18th edition qualified (although training could be provided) Completed a hands-on apprentice training programme HNC or HND qualification (or equivalent) Experience in heavy industry manufacturing About our Benefits Weekly paid Annual earnings are circa £52,200(inclusive of allowances and bonuses) Overtime is available to increase earning potential Support is there when you need it through our employeeassistanceand wellbeingprogrammes. This includes a 24/7 online GP, access to counselling, mental health support, and get-fitprogrammes Health and wellbeing benefits include dental cover, a health cash plan, and eye tests Financial advice and support are available, including expert guidance from our pension provider and help with savings and loan options Discounts are available with a range of retailers, gyms, and wienerberger products Life assurance is provided at twice your annual salary You can join our Share Incentive Plan and our Employee Profit ParticipationProgramme, so you share in our success About us wienerberger UK & Ireland is building forwhatsnext - delivering full building envelope solutions for the built environment. Uniting leading brands andexpertise, we empower our partners to create lasting impact, with quality products, technical support, and a shared commitment to progress. Join us as an Electrical Maintenance Engineer and help us shape tomorrow becausewerebuilding forwhatsnext and that starts with you. The closing date for this role is subject to change and may be closed earlier than advertised.

Up to £64.81 per hour umbrella (Inside IR35)

Up to 4 days per week on site

6 Month contract (initially)

Our client is currently looking for a Senior Mechanical Engineer to join the Precision Guidance Integrated Project Team (IPT), working on equipment for the next generation of Missile Seeker Programmes.

Key Responsibility Areas:

• Support senior members of staff in the delivery of technical solutions on critical Business Programmes.
• Generation of mechanical solutions to relevant company and international standards.
• Design of engineering solutions taking into account all requirements including product quality, safety, reliability, testability, sustainability, etc.
• Mechanical engineering detailed design, including numerical calculations, tolerance studies, etc.
• Produce Manufacturing Data Packs in line with BS8888 including appropriate application of GD&T.
• Generate BoM within approve PLM system (Teamcenter).
• Contribute to reviews of Mechanical designs in accordance with business and industry standards.
• Deliver design solutions against Technical Requirements, within budget and timescales.

Skills, Qualifications & Knowledge:

• Technical or science degree qualified, or equivalent, with experience.
• Mechanical engineering for Electronic Products (including EO).
• Perform ‘hands on’ mechanical design and development using 3D CAD software (PTC Creo).
• Structural design and an ability to carry out ‘first pass’ analyses and work in conjunction with full-time Structural Analysts.
• Experienced in working on Electro-Optic Products, with proven knowledge of electrical screening, grounding, opto-mechanical sub-assemblies, etc.
• Detail and assembly drawing generation, in accordance with BS8888.
• Numerical calculations, tolerance studies, etc.
• Proven understanding of the application of materials and process finishes to meet EO Product needs.
• Experienced in the design of Jigs, Fixtures and Tooling to support the Assembly, Integration and Testing of EO Products, for the Aerospace and/or Defence sector.
• Ability to work within a multi-discipline IPT.
• Knowledge of Cable Harness design, including Connector selection, screening, strain relief methods, etc.
• Experienced in various aspects of DfX, including Manufacturing, Assembly, Test, Integration and Sustainability.
• Operating in a high performing multi-disciplinary Team.

Desirable:

• Capable of performing ‘first pass’ Thermal analyses.

Are you a hands-on engineer that enjoys solving technical challenges? Do you like a role where no two days are the same? This could be the perfect opportunity for you!

The Role
As a Service Engineer, you will be building, repairing, and installing cable harnesses for critical applications. You’ll work directly with customers and internal teams to ensure equipment is safe, reliable, and meets the highest quality standards. While some prior experience with cable assemblies is ideal, full training is provided, so ambitious candidates with technical curiosity are encouraged to apply.

The Company
Our client is at the forefront of delivering high-quality engineering solutions for demanding industries. They pride themselves on fostering a supportive, collaborative workplace where employees can develop their skills and grow their careers. Joining the engineering team means becoming part of a group that values precision, safety, and continuous learning.

The role is primarily based in Telford, and may occasionally require flexible hours or short periods of travel to support client projects.

What’s Required?
The ideal candidate will have:

• Hands-on experience with cable harness assembly, repair, or installation
• A detail-oriented, problem-solving mindset and the ability to work independently or in a team
• Strong communication skills for working with colleagues and clients
• Flexibility to work occasional evenings, weekends, or travel as needed
• Familiarity with IPC standards is a plus!

Ready to take your technical skills to the next level and work on critical infrastructure projects? Apply now to become a Service Engineer!

Service Engineer, Cable Assembly, Telford, COR7511
Corriculo acts as an employment agency and employment business. #AS #ChannelB