Service Engineer / Field Service Technician / Compressor Engineer required to join a global, market leading engineering manufacturer.

The Successful Service Engineer / Field Service Technician / Compressor Engineer will be fully remote, providing electrical and mechanical repair, service and maintenance on compressed air systems at customer sites across Norfolk, Suffolk, Cambridge and surrounding areas. Full product training provided.

The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a service background in compressed air, air filtration, nitrogen generators, vacuum pumps, or relatable compressed air equipment.

Package

• £38,000-£42,000 depending on experience
• Company van - door to door pay
• Company phone and laptop
• 25 days holiday + bank holidays
• Company pension + shares scheme
• Overtime
• Additional benefits

Service Engineer / Field Service Technician / Compressor Engineer Role

• To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites across Norfolk, Suffolk, Camebridge and surrounding areas.
• The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, air filtration and other compressed air products.
• Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, filtration and other compressed air and pneumatic equipment.
• Installing compressed air systemsinto all forms of the manufacturing industry.
• Perform emergency breakdown fault finding and repairs on various compressed air equipment.
• Commute to the office near Thetford 2/3 times a week for parts collection and training.
• Liaise with various engineering departments.

Service Engineer / Field Service Technician / Compressor Engineer Requirements

• Proven diagnostic skills on complicated electrical / mechanical engineering systems. Full product training provided.
• Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Multiskilled Engineer / Mechanical Engineer / Electrical Engineer / M&E Engineer or similar.
• The ability in maintaining good professional working relationships with existing and new compressed air customers.
• Field servicing background in electrical or mechanical engineering such as compressors, air filtration, nitrogen generators, vacuum pumps, vacuum systems or relatable compressed air equipment.
• Good working knowledge of three phase electrics and controls is advantageous.
• A technical engineering degree / qualification, apprentice trained, FGas or similar would be advantageous.
• Willingness to travel to customer sites across Norfolk, Suffolk, Camebridge and surrounding areas.

I’m so happy to be back working with client in the Aberdeen market, recruiting Embedded Software Engineers again. This is how I started my career back in 2001. If you’re an Embedded Software Engineer looking for a new role in Aberdeen (or willing to relocate) and you’d like a salary in the region of £50k to £60k + benefits with Hybrid working (3 day a week on-site), then read on… You’ll join a global market leader in the development and support of critical safety systems primarily for the subsurface market. To be successful in this role you’ll need the following skills and experience: - Demonstrable experience of embedded C/C++ software development - Knowledge of developing and testing & debugging with ST32, MPLAB etc. - Previous experience of UI design & development - Additional knowledge of C# is advantageous - Working knowledge of communications protocols (RS232, RS485, TCPIP etc.) - Existing security clearance or ability to gain SC level clearance This is an exciting time to join this well established global business as they continue to develop and enhance their suite of products within a friendly, collaborative work environment. If you feel this is the right move for you, then please apply NOW for immediate consideration.

We are delighted to be supporting a respected building services consultancy who are recruiting for an Electrical Design Engineer to lead and deliver high-quality Electrical and Mechanical projects across a range of sectors.

This senior role is perfect for someone with strong technical expertise and leadership skills who is ready to manage teams, drive project success, and build lasting client relationships.

What you will be doing:

• Lead M&E design projects from concept to completion
• Manage and mentor a multidisciplinary team of 5
• Ensure compliance with H&S and QA standards
• Oversee budgets, resource planning, and client communication
• Support business development and fee proposals

What our client requires:

• Degree in Electrical Engineering or similar
• Strong project leadership skills
• Client-facing experience
• Solid knowledge of building services design and relevant software (e.g. Revit, IES)

Our client offers flexible/hybrid working together with a favourable benefits package and competitive salary. If you would like to work for a supportive and inclusive company who offer a clear path to progression this could be the role for you.

If you would like to know how we will store and process your data, please visit our website to read our GDPR Data Protection Statement.

TJX Companies

At TJX Companies, every day brings new opportunities for growth, exploration, and achievement. You’ll be part of our vibrant team that embraces diversity, fosters collaboration, and prioritizes your development. Whether you’re working in our four global Home Offices, Distribution Centers or Retail Stores-TJ Maxx, Marshalls, Homegoods, Homesense, Sierra, Winners, and TK Maxx, you’ll find abundant opportunities to learn, thrive, and make an impact. Come join our TJX family-a Fortune 100 company and the world’s leading off-price retailer.

Job Description:
Staff Engineer (Oracle MOM)

Who we are
The Oracle Retail Solution Delivery team develops the software and systems that support TJX’s core financial Oracle MOM suite applications including Stock Ledger, Sales Audit and Markdowns. This role leverages your experience with Oracle Technologies to deliver our scalable global applications. Our team is looking for people with a passion for technology, intellectual curiosity, and a willingness to try new things that drive better solutions and help the MOM ART achieve high-value results for our customers. We want creative people that are familiar with the challenges of working within a large organization with many stakeholders as well as the hands-on challenges of designing, developing, and
deploying software using Oracle technologies. A strong background of technical and functional achievements with the MOM suite with a commensurate detailed knowledge of the strengths/weaknesses of the on-prom suite is expected. A solid awareness of the ORACLE SaaS Merchandise Foundation, Price Hub & Sales Audit offerings a plus.

Responsibilities include;

• Providing analysis to both technical and non-technical audiences.
• Presentation skills with a high degree of comfort with both large and small audiences
• Demonstrate a substantial Oracle Retail, Retail domain design level of knowledge (SaaS & ONPREM)
• Demonstrated expertise in designing and implementing Oracle retail modules
• (ONPREM/SaaS) customizations within MFCS
• Demonstrate Expertise working on a wide range of Integration patterns
• Ability to define effective Architectural and Design guard rails that drive efficient design and development processes

Demonstrated hands-on success;

• in programming using: Java, Pro C and PL/SQL
• in scripting languages using: JavaScript and shell script
• in database query language such as: Oracle - performance, EXA, etc.
• 9 + years of experience as an Engineer in a Retail domain or related occupation
• Experience must include experience in agile software development
• Demonstrated technical thought leadership in customer facing situations
• Experience with industry standards for enterprise integration patterns

Benefits include Associate discount; 401(k) match; medical/dental/vision; HSA; health care FSA; life insurance; short/long-term disability; paid holidays/vacation /sick/bereavement/parental leave; EAP; incentive programs for management; auto/home insurance discounts; tuition reimbursement; scholarship program; adoption/surrogacy assistance; smoking cessation; child care/cell phone discounts; pet/legal insurance; credit union; referral bonuses. All benefits are subject to applicable plan or program terms (including eligibility terms) and may change from time to time. Contact your TJX representative for more information.

In addition to our open door policy and supportive work environment, we also strive to provide a competitive salary and benefits package. TJX considers all applicants for employment without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, gender identity and expression, marital or military status, or based on any individual’s status in any group or class protected by applicable federal, state, or local law. TJX also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Americans with Disabilities Act and applicable state and local law.

Address:
300 Value Way

Location:
USA Home Office Marlborough MA 300 Value Way

This position has a starting salary range of $(phone number removed) to $(phone number removed) per year. Actual starting pay is determined by a number of factors, including relevant skills, qualifications, and experience. This position is eligible for an annual incentive as well as long-term incentives.

Job Title: Senior Mechanical Engineer
Location: Warrington, Cheshire + Hybrid Working Arrangement
Compensation: Competitive Salary + Benefits
Role Type: Full time / Permanent

The role

As a Senior Mechanical Engineer, you’ll have a role that’s out of the ordinary. Youll manage the delivery of engineering and technical activities, through the application of process, domain knowledge and experience.

This role is full time, 37 hours per week and is based in Warrington, Cheshire. This role provides hybrid working arrangements with 3 days in the office and 2 days working from home.

Day-to-day, you’ll assist in effective management of the customer, including liaison and relationship development with existing and new customers.

Ensure procedures, codes and standards are correctly identified and applied to engineering and technical activities.

Contribute to Project Safety Assessment process.

Ensure task and project risks are communicated and managed appropriately.

Produce, review and approve calculations, analyses, drawings, models, design basis documentation and technical reports as assigned.

Essential experience of the Senior Mechanical Engineer:

Experience in working collaboratively in multi-discipline teams to deliver activities on a range of project types.

Demonstrable experience in covering a variety of tasks across a range of complexities.

Good communication skills and the ability to interface with other disciplines.

Qualifications for the Senior Mechanical Engineer:

Minimum HNC/HND in Engineering, or equivalent experience in relevant engineering discipline, with significant demonstrable experience.

Chartered Engineer status (or actively working toward Chartered Status).

Security Clearance
The successful candidate must be able to achieve and maintain Security Check (SC) clearance for this role

Job Description

Job Title: Safety Engineer - Submarines

Working Location: Full Time / hybrid

Working Pattern: Derby, UK

An exciting opportunity has arisen for a Safety Engineer to join Rolls-Royce Submarines in Derby.

We’re a leader in propulsion system design and development for the Royal Navy’s nuclear submarine fleet and the sole provider and technical authority.

Join us and we’ll provide an environment where you can be yourself. An inclusive, digital-first culture that invests in you, gives you a platform for continuous learning, and access to an incredible breadth and depth of opportunities to grow your career.

We are looking for a capable and proactive individual to join our growing team and be responsible for ensuring that the safety and governance are defined, implemented and managed.

Why join Rolls-Royce?

At Rolls-Royce we are proud to be a business that has truly helped to shape the modern world and are committed to always being a force for progress; powering, protecting and connecting people everywhere.

By joining Rolls-Royce, you’ll have the opportunity to work on world-class solutions, supported by a culture that believes individuality is our greatest strength, and all perspectives, experiences and backgrounds help us innovate and enable our high-performance culture.

What you will be doing:

• You will be producing Safety Cases for new Nuclear Manufacturing Facilities.

• Adopting Inherent Safety and Defence in Depth approach to the development of modern standard Right First Time holistic Safety Cases.

• Integrating cross-functional learning from Nuclear, Radiological, Environmental and Process Safety Relevant Good Practice (RGP) and shaping holistic safety processes.

• Undertaking multi-stage hazard studies and analysis to determine fault and consequence scenarios and resulting in engineered and administrative prevention and mitigation measures.

• Liaising with design and project engineers to ensure that safety is baked into new facility design.

Position Qualifications:

To be successful in this role, we are looking for someone who is/has:

• A Degree in Engineering or Science discipline, or equivalent
• A demonstrable ability to work in multidisciplinary teams to tight deadlines
• The ability to provide clear, concise and accurate technical reports
• Previous safety experience in the nuclear industry or other high hazard industry.
• Experience or knowledge of hazard identification techniques such as FMEAs, HAZOPs, Fault & Event Tree Analysis, and reliability evaluation methods.
• Experience or knowledge of hazard assessment processes, including design basis assessment techniques (e.g. production of fault schedules, the derivation of safety functional requirements) and As Low As Reasonably Practicable (ALARP) assessments.

For more than 60 years Rolls-Royce Submarines has designed, supplied and supported the nuclear propulsion plant, providing power for all UK Royal Navy nuclear submarines.

To work for Rolls-Royce Submarines an individual must hold a Security Check clearance. We will support the application for Security Clearance if you don’t already have it. Due to the nature of work we conduct, we can only progress applications from individuals who are a UK national or, in MoD approved cases, a dual national.

Regional Benefits

We offer excellent development, a competitive salary and exceptional benefits. These include bonus, employee support assistance and employee discounts.

Our vision is to ensure that the excellence and ingenuity that shaped our history continues into our future. Our multi-year transformation programme aims to turn Rolls-Royce into a high-performing, competitive, resilient and growing company. Join us, and it can be your future vision too.

Rolls-Royce are committed to being a respectful, inclusive, and non-discriminatory workplace where individuality is valued, diverse perspectives fuel innovation, and everyone can thrive.

As part of our selection process, candidates in certain locations may be asked to complete an online assessment, which can include cognitive and behavioural aptitude testing relevant to the role. If required, full instructions for the next steps will be provided.

Job Category

Safety & Product Assurance

Posting Date

05 Jan 2026; 00:01

Posting End Date

PandoLogic. Keywords: Safety Representative, Location: Derby, ENG - DE23 8NX

Senior Software Engineer - Up to 350,000 - Cambridge

Title: Senior Software Engineer

Company: Proprietary HFT

Location: Cambridge

Pay: Up to 350,000 with huge potential to increase

Company:

A proprietary trading firm in Cambridge, specialising in the research and development of ultra-low-latency automated trading strategies, are looking for a Software Engineer with a demonstrable background of delivering complex projects from a concept through to delivery.

It is important that you have been involved in the entire software development life cycle (SDLC), as this dynamic role will require you to rapidly prototype - and ultimately move into production - highly complex, reliable and performant systems - oftentimes from scratch.

Role:

• Develop ultra-low-latency trading systems C++ or Rust code
• Work closely with a close-knit team of Software Developers and Quant Traders
• Build mission-critical research systems from scratch
• This is an early-stage hire for the team. Much of your work will be completely greenfield. You will be involved in the designing, prototyping, testing and productionising new software.
• Providing support to a small number of junior engineers
• Whilst not a requirement, you will be given the opportunity to grow into a senior managerial role should you wish

About you:

• Holistic approach to problem solving; you are able to see the ‘bigger picture’ of your work
• Exceptional systems knowledge
• Exceptional Linux knowledge
• Strong networking knowledge (TCP/IP)
• Strong concurrent programming ability (C++ or Rust)
• Experienced working with distributed systems

Full details are available. Please don’t hesitate to get in touch.

Junior Software Developer - 65,000

Title: Junior Software Developer (C++)

Client: High Performance Systems

Location: London, Cambridge or Remote (from the UK)

Package: Up to 65,000

This is a fantastic opportunity for any genuinely passionate graduates/junior engineers with a track record of extra-curricular/personal coding projects to join a high-performance team with a culture of knowledge sharing and collective growth.

The business are well reputed for growing graduates internally, and for providing ultra-low-latency solutions using C++.

The role:

• Write high-performance C++ code.
• Low-latency networking.
• Work on live projects from day one with a team to support you.
• You will have a dedicated mentor with expertise in software development to coach you into becoming the best engineer you can be.
• There is a culture of hands-off management - you will be given trust and autonomy from the offset with no micromanagement.
• Friendly and collaborative culture.

Requirements:

• Computer Science or related degree
• Must have a GitHub/extensive examples of personal programming projects (C/C++ preferred)
• Genuine interest in technology!
• You will stand out if you have low-level personal projects (e.g., compilers, networks, OS )
• You will not be considered if you do not have a portfolio/code examples to share

If you are interested learning more, please get in touch.

CO Home Improvements

Competitive Salary + Benefits

Cumbria

Benefits:

25 days Holiday + Bank Hols | Health cash plan | Pension Scheme | Personal development programmes through courses and training | Free parking

About us:

CO Home Improvements are a group of six retail brands operating across the North of England and Cumbria, forming part of the £60 million turnover Conservatory Outlet Group. As established leaders in the design and installation of conservatories, orangeries, windows, doors, and modern living spaces, we’re committed to transforming homes with innovative, high-quality products that combine striking design with everyday functionality. Our approach is rooted in delivering exceptional customer service.

Our employees are the heart of the business, and we invest in great people by offering ongoing career development and training opportunities. If you’re passionate about making a difference and want to be part of a team that values your ideas and hard work, we’d love to hear from you.

About the Role:

We are looking for an experienced Project Manager or Contracts Manger to join us to ensure installations run smoothly, customers receive excellent quality and service, and on time within the Cumbria area ideally between Kendal and Carlisle.

Key responsibilities include:

• Responsible for reviewing contracts, issuing work to surveyors, and assisting surveyors with any technical challenges, ensuring all external and internal contractors achieve deadlines.
• Responsible for scheduling work for our fitting teams and other external contractors ensuring that all building work runs smoothly.
• Be the first point of contact for liaising with all trades to ensure a smooth continuity of work and a first-class operation for customers.
• To attend site to oversee any issues that may arise with the installations, ensuring health and safety is adhered to, site housekeeping standards are maintained, and the client is satisfied with the installation.
• Ensure contracts are completed on time and to a high-quality standard
• To develop excellent working relationships with external and internal stakeholders including customers, suppliers, and dealers.

What we are looking for:

If you have Project Management, Site Management or Installation Management experience we would love to hear from you. Key experience we are looking for:

• Previous experience and strong knowledge of the window/conservatory industry is desirable.
• Excellent planning and organisational skills with the ability bring installations in on completion date.
• Strong negotiation skills with a focus on achieving budgets and maintaining profitability.
• Excellent product knowledge, keeping up to date with industry and new product developments.
• Strong technical capability, with the ability to understand the theory of installation processes
• Good commercial and business acumen.
• Excellent people management skills, with the ability to provide strong leadership and direction.

If the above sounds like you, we would like to hear from you!

How to apply:

Ready to start your career with us? Apply with your updated CV.

Equals One is an advertising and recruitment agency working on behalf of our client to promote this vacancy. You may be contacted directly by the employer should they wish to progress your application. Due to the number of applications we receive, we are unable to provide specific feedback if your application is unsuccessful.

Our client—a well-established, forward-thinking civil engineering consultancy based just outside Glasgow—is seeking a skilled engineer to join their team. This is an excellent opportunity to work on a wide range of residential infrastructure projects with a company that values work/life balance and delivers high-quality results.

As a Civil Infrastructure Engineer, you’ll contribute to the design and delivery of residential and mixed-use developments. You’ll manage technical designs, produce drainage and road layouts, and liaise with local authorities and clients to keep projects moving smoothly.

You will also:

• Designing roads, drainage systems, and external works for residential developments
• Preparing detailed drawings and technical specifications
• Coordinating with clients, architects, and statutory bodies
• Using industry-standard software such as AutoCAD, Civil 3D, and MicroDrainage

Qualifications/ Experience needed:

• HNC/D or degree in Civil Engineering (or related discipline)
• Experience in residential infrastructure design (roads and drainage)
• Competent user of AutoCAD and related design tools

Here’s what you will get:

• Join a relaxed yet professional office environment
• Predominantly office-based role—ideal for those who enjoy in-person collaboration
• Varied project work with room to make a real impact
• Excellent long-term career prospects within a growing business

If you’re an experienced Civil Infrastructure Engineer seeking a role that offers genuine work-life balance without compromising on project quality, this could be the ideal next step.

Apply today, or contact Marie on 01786 446651 quoting J46229 to learn more.

Legal Information:
We act as an employment agency for permanent work and as an employment business for temporary work.

For roles in the UK, applicants must be eligible to live and work in the UK.

We value diversity and promote equality. No terminology in this advert is intended to discriminate against any of the protected characteristics that fall under the Equality Act 2010. We encourage and welcome applications from all areas of society and can discuss any reasonable adjustments to support your application.

Are you ready to ignite your career and bring your expertise to a leading facilities management company?

Due to our continued growth and success, Atlas Workplace Services is seeking a highly skilled and driven Mobile Gas Engineer to join our dynamic regional team.

As part of the regional mobile team, you will be required to assist the team in the efficient delivery of the PPM and reactive maintenance works. You will be required to deliver a wide range of statutory and routine PPMs as well as reactive maintenance work that will require completing in-line with specific contract SLAs.

Principle Duties and Responsibilities

• Ensure the highest standards and Atlas competencies are delivered and demonstrated.
• Deliver Portfolio PPM and minor works
• Ensure the Client, Customer and Team are kept in the loop through feedback and regular updates
• Contribute to the delivery of a quality service, aiming for 100% satisfaction of the Customer
• Provide technical support, advice and guidance to the Customer and Team
• Ensure best value for money to the Client by ensuring accuracy within the Team by checking resource and materials are suitable to effectively deliver the service
• Ensure safe delivery of all Atlasworks, including those of our service partners
• Produce details of time and materials required for any minor works for quoting purposes.
• Liaise with Account Support, Supervisors, Managers, and Sub-Contractors to deliver work to the highest standard within SLA, as required.
• Build and foster relationships with the Client, Customer, other Atlas colleagues
• Ensure Maximo system is constantly updated via your issued tablet and that all time is accounted for on the generated timesheet.
• Take ownership of the standard of work delivered ensuring exceptional service to the customer.
• Cover all call out responsibilities out of hours when rostered.

Minimum Qualifications, Certifications and Training required

• Full DrivingLicense
• Qualified M&E Engineer - bias in Combustion.
• CCN1 Core Domestic Gas Safety (compulsory), now includes combustion performance analysis
• CENWAT - Central Heating Boilers & Water Heaters
• CODNCO1 - Changeover from Domestic Natural Gas to Commercial Natural Gas
• ICPN1 - Installation of Commercial Pipework in excess of 35mm
• TPCP1A - Testing and Purging of Low Pressure Commercial Pipework, not exceeding 1m3 (<1m3) in volume, 21 mbar operating pressure - NG
• ACS Core Commercial Gas Safety - COCN1 or ACS - Changeover Domestic to Commercial CODNC01
• TPCP1 - Testing & Purging Pipework greater than 1m3 (>1m3) 6" (150mm)
• CORT1 - Overhead Radiant Tube Heaters
• CDGA1 - Direct Fired Commercial Appliances
• CIGA1 - Installation of commercial indirect fired appliance

Essential Knowledge, Skills and Experience for this role:

• Strong, demonstrable competencies in Gas, pipework etc
• Good understanding of modern office software. Experience of working with asset/work management systems such as MAXIMO / CAFM systems on Android tablets.
• 2 years previous experience within similar environment and in particular across area multi sites and multi discipline service delivery.
• 1 years experience in customer facing outsourcing environment.
• Ability to manage priorities in line with business needs.

?At Atlas Workplace Services, we believe great buildings start with great people. Thats why weve reimagined facilities management to put people firstthose who work in the spaces we care for, and those who deliver our services every day.

Were not just another FM provider were a top-10 industry leader committed to doing things differently, with a personal touch, smart technology, and a passion for going the extra mile.

As part of an Employee Ownership Trust (EOT), Atlas Workplace Services is proud to be a company where our people have a meaningful stake in our success. Being part of an EOT isnt just about sharing in the companys performance; its about creating a culture of shared responsibility, collaboration, and pride in what we achieve together.

The client are an established designer and manufacturer of bespoke test systems and applications for the automotive industry.

They are seeking to recruit an Installations and Commissioning Engineer for their busy operations in Worcester.

Salary on the role is up to £48k per annum.

The role is Monday to Thursday 8.30am to 5pm and then Friday 8.30am to 1pm.

Key responsibility of the role

The Installation and Commissioning Engineer is responsible for the on-site installation, testing, commissioning and handover of systems and equipment to ensure they meet design specifications, safety standards, and customer requirements. The role involves close collaboration with project managers, design teams, and clients to deliver projects on time and to a high standard of quality.

Responsibilities and duties

• Install, configure, and commission equipment and systems according to engineering drawings, specifications, and project plans
• Perform pre-commissioning checks, functional testing, and performance verification
• Diagnose, troubleshoot, and resolve technical issues during installation and commissioning
• Ensure all work complies with health, safety, environmental, and quality standards
• Liaise with customers, contractors, and internal teams during site activities
• Produce commissioning reports, test documentation, and as-built records
• Provide technical support and training to customers and operators as required
• Participate in factory acceptance tests (FAT) and site acceptance tests (SAT)
• Support system upgrades, modifications, and corrective maintenance when needed
• Travel to customer sites as required, including occasional international travel

Experience and knowledge required

• Proven experience in installation, commissioning, or field engineering roles
• Strong understanding of electrical/mechanical systems, controls, and instrumentation
• Knowledge of engine test and component test related equipment
• Understanding of PLC software and troubleshooting using diagnostics tools (Siemens S7 preferable)
• Integrating control technology into mechanical assemblies
• Calibration of instruments
• Fluid systems of solid and flexible pipes and fittings including- fuel systems, petrol and diesel, water systems for engine systems, oil systems, pressure testing and lead detection, filtration, flow, temperature and pressure testing
• Pneumatics systems knowledge (hard piping, flexible hoses and plastic tubing)
• Able to read technical engineering drawings
• Able to travel nationally and internationally to client sites
• Clean driving license
• Good time management and organisational abilities

Expenses to be paid by the company, a phone, a laptop and a car provided.

Free parking available on site at headquarters in Worcester, training and progression opportunities to be provided

The role is based in Worcester so would be commutable from Droitwich, Redditch, Bromsgrove, Kidderminster, Alcester, Birmingham, Solihull, Tewkesbury, Evesham

£70,000-£80,000 + Progression + Training + Hybrid working + Car Allowance (salary sacrifice scheme) + Bonus + Company Benefits

Chelmsford

Are you a Project Engineer or similar with experience working on Pumping Stations projects? On offer is a dynamic role offering autonomy to oversee specialist, cutting edge projects for a broad client base including many household names within a tight-knit, growing consultancy offering the chance to progress to leadership roles.

This tight-knit company provide both consultancy and fixed price work within the water industry to a broad client base, primarily regional service providers. They have been moving from strength-to-strength, doubling their turnover in the last 12 months and due to this are looking to grow their friendly team.

In this technical role you will be responsible for running numerous projects simultaneously, with autonomy over how and when you work. You will be responsible for the entire project lifecycle as you are involved in design, documentation, commissioning and installation phases. Further to this you will lead client and team meetings as you liaise closely with other departments and mentor junior team members.

This varied role would suit a Project Engineer or similar from a Pumping Stations background looking to join a tight-knit, growing company undergoing a period of exciting growth who offer the chance to grow a team around you and increase your earnings through a bonus.

The Role:
* Head up numerous projects simultaneously, work through entire project lifecycle
* Lead design, installation and commissioning phases
* Produce reports, documentation and attend project meetings
* Lead meetings and be go-to person for clients and directors
* Mentor and support junior team members

The Person:
* Project Engineer or similar
* Pumping Stations background
* Commutable to Chelmsford

Project, Engineer, Manufacturing, Design, Installations, Energy, Water, Commissioning, ICA, Documentation, Lifecycle, South East, Essex, Hertfordshire, London Colchester, Bishops Stortford

Reference number: BBBH23140

If you are interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

A superb Field Service Engineer role with a market leading manufacturer of state of the art product inspection machinery solutions sold to the food, beverage & pharmaceutical markets. A good salary package for a good work - life balance and a genuinely nice place to work. You will be working for an engineering company owned and run by Engineers. BASIC SALARY: up to £45,000 BENEFITS:· Up to £14,000 Overtime · Choice of Hybrid company car LOCATION: Covering the UK and office based 1 day per week so ideally living on the M6 corridor between Birmingham and Manchester COMMUTABLE LOCATIONS: Birmingham, Stoke, Manchester, Derby, Nottingham, Tamworth, Leeds JOB DESCRIPTION: Service Engineer, Field Service Engineer, Maintenance Engineer - inspection machinery, packaging machinery - Food, Beverage & Pharmaceutical A classic Field Service Engineer role involving the repair, installation and commissioning of product inspection machinery solutions plus providing customer training both on site and at the companies office. Overtime will be paid door to door when on site and you will be staying away for 2 to 3 nights per week on average. You will be In the office one day per week, on average, with almost no weekend work and there is typically 2 weeks a year working worldwide as required. Full intensive product training will be provided in the UK & Europe. PERSON SPECIFICATION: Service Engineer, Field Service Engineer, Maintenance Engineer - inspection machinery, packaging machinery - Food, Beverage & Pharmaceutical Ideally, you will be an experienced Field Service Engineer with hands on experience of packaging machinery or product inspection systems supplied to the food, beverage &/or pharmaceutical markets. However, the company will consider an experienced factory Maintenance Engineer who has hands on experience of product inspection systems and has worked in the food, beverage &/or pharmaceutical markets who wants to move into a field service role. But, you MUST be a qualified Multi Skilled Engineer. THE COMPANY: A worldwide market leading designer & manufacturer of state of the art product inspection systems sold into the food, beverage & pharmaceutical markets. They invest massively in R & D and write their own software so they are able to offer very high quality bespoke solutions delivered quickly to suit client needs. INTERESTED? Please click apply. You will receive an acknowledgement of your application. Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct. REF: MPH18347, Wallace Hind Selection

An exciting opportunity has arisen for a Software Engineer to join a leading provider of flight simulation technology. You will develop real-time software used in state-of-the-art Full Flight Simulators and Fixed Training Devices that replicate the form, fit, and function of real aircraft flight decks. This role sits at the heart of a major transformation programme and is ideal for someone who is hands-on, motivated, and eager to implement change in a fast-paced, customer-focused environment. Key Responsibilities for the Software Engineer Develop real-time software for flight simulators, from control systems to graphical user interfaces. Support integration, testing, fault finding, and problem resolution on simulated systems. Contribute to the full product lifecycle, from requirements analysis through to customer acceptance and post-delivery support. What You’ll Bring Strong C programming skills. Practical understanding of the Systems Engineering V-model and/or Software Development Lifecycle. Ability to work collaboratively in a multi-disciplinary team, with minimal supervision. Strong communication and presentation skills. Degree in engineering, mathematics, science, or equivalent experience within aviation/aerospace engineering. Desirable Skills Experience with safety-critical systems in aerospace, automotive, or related industries. Knowledge of C#, C++, web technologies (JavaScript, HTML), and Windows application development (Visual Studio). Familiarity with ARINC, AFDX, or CAN bus protocols. Experience using the Atlassian toolset (Jira, Confluence, Bitbucket, Bamboo). Benefits 25 days holiday (plus bank holidays), increasing with service, with the option to buy/sell up to 5 days. Private medical insurance (with optional family cover). Pension scheme with up to 7% employer contribution. Life assurance (4x salary, flexible up to 10x). Group income protection. Flexible benefits including healthcare cash plan, dental cover, gym membership, critical illness cover, and cycle-to-work scheme. Employee assistance programme for mental health and wellbeing. Subsidised staff restaurant and on-site parking with electric vehicle charging. Why Join Challenging Projects: Work on cutting-edge flight simulators used by global aerospace organisations. Collaborative Environment: Partner with experts across systems, hardware, and software engineering. Innovative Technology: Develop next-generation simulation solutions, including avionics hardware and advanced control systems. Career Growth: Opportunities for professional development and advancement within a forward-thinking, global industry. Eligibility: Applicants must have the right to work in the UK. This is a unique opportunity to contribute to next-generation flight simulation technology, working with cutting-edge systems that enhance pilot training and aviation safety worldwide. TT

Junior Software Developer - £65,000 Title: Junior Software Developer (C++) Client: High Performance Systems Location: London, Cambridge or Remote (from the UK) Package: Up to £65,000 This is a fantastic opportunity for any genuinely passionate graduates/junior engineers with a track record of extra-curricular/personal coding projects to join a high-performance team with a culture of knowledge sharing and collective growth. The business are well reputed for growing graduates internally, and for providing ultra-low-latency solutions using C++. The role: \* Write high-performance C++ code. \* Low-latency networking. \* Work on live projects from day one with a team to support you. \* You will have a dedicated mentor with expertise in software development to coach you into becoming the best engineer you can be. \* There is a culture of hands-off management - you will be given trust and autonomy from the offset with no micromanagement. \* Friendly and collaborative culture. Requirements: \* Computer Science or related degree \* Must have a GitHub/extensive examples of personal programming projects (C/C++ preferred) \* Genuine interest in technology! \* You will stand out if you have low-level personal projects (e.g., compilers, networks, OS...) \* You will not be considered if you do not have a portfolio/code examples to share If you are interested learning more, please get in touch

Senior Backend Software Engineer - Cloud-Native Platform Up to 85,000 Hybrid (Nottinghamshire HQ)

I’m delighted to be once again recruiting on behalf of my technology-led client that’s building a modern, cloud-native platform from the ground up. They’re looking for a Senior Backend Software Engineer to join a high-performing team focused on delivering scalable, secure, and high-quality services using the latest tools and engineering practices.

This is a hands-on role for someone who enjoys solving complex problems, working in a microservices environment, and contributing to architectural decisions. The team values clean code, automation, and continuous improvement-and they’re looking for someone who shares that mindset.

Key responsibilities as the Senior Back-End Software Engineer are:

• Design and develop backend services using Node.js and TypeScript, deployed in a cloud-native environment.
• Build and maintain GraphQL and REST APIs to support a range of digital products and integrations.
• Collaborate with architects, product managers, and other engineers to shape scalable technical solutions.
• Integrate with third-party platforms and services, including content systems, payment providers, and internal tools.
• Contribute to CI/CD pipelines, infrastructure automation, and DevOps practices.
• Promote engineering best practices across testing, documentation, and code quality.
• Stay up to date with emerging technologies and bring innovative ideas to the team.

Skills & Experience needed:

Essential:

• Strong experience with Node.js and TypeScript
• Proven background in microservices architecture
• Solid understanding of GraphQL and RESTful API design
• Experience with SQL and NoSQL databases
• Familiarity with CI/CD, automated testing, and modern development workflows

Desirable:

• Experience with Azure or other cloud platforms
• Knowledge of Infrastructure as Code (e.g., Terraform)
• Exposure to event-driven architecture and messaging systems
• Containerization and orchestration experience (e.g., Docker, Kubernetes)

Package & Working Model

• Salary: Up to 85,000
• Hybrid working: 3 days per week onsite in Nottinghamshire HQ
• Flexible hours and collaborative team culture
• Opportunity to work on a greenfield platform using modern technologies

If you’re a senior engineer looking for a fresh challenge in a tech-first environment, I’d love to speak with you. Drop me a message for a confidential chat or to learn more about the team and the opportunity.

Studies suggest that women tend not to apply for a job if their CV isn’t a perfect fit. Here, talent takes precedence over experience. So, if you like the role and think you could be awesome at it in time, go ahead and apply.

Job Title: M365 Backup Design Architect

Location: Sheffield/Hybrid (3 days per week on site)

Rate: 558 per day inside ir35

Contract: 11 months+

I am looking for a M365 Backup Design Architect, you will be responsible for the overall architecture and strategy for Rubrik M365 backup implementation across HSBC’s enterprise tenant.

Key Responsibilities:

• Define end-to-end backup architecture for Microsoft 365 workloads (Exchange, SharePoint, OneDrive, Teams).
• Design high-availability and recovery strategies.
• Ensure compliance with HSBC security and regulatory standards.
• Capacity planning for 350k users and petabyte-scale data.
• Integrate Rubrik with existing HSBC infrastructure and identity management.
• Provide technical leadership and governance throughout the project lifecycle.

Required Skills:

• 8-10+ years in Microsoft 365, with proven delivery of Tenant backups enterprise scale.
• Deep expertise in Rubrik Enterprise Backup solutions (or other tenant backup software).
• Strong knowledge of Microsoft 365 architecture and APIs.
• Experience with large-scale enterprise deployments.
• Familiarity with compliance frameworks (GDPR, financial regulations).
• Excellent stakeholder communication and documentation skills

If you are interested in this role or wish to apply, please feel free to reply to this advert or call me on (phone number removed).

Many thanks,

We are currently recruiting for a Software Engineer to join their busy client who is rapidly expanding on a remote home working basis.

Your main role will be to develop software / applications for this market leading software provider.

The main purpose of this role is to:

• Develop software applications using C++ as the main language
• Complete unit testing to ensure the software performs as per the design
• Use JIRA to report on faults

The ideal candidate will have the following skills, experience and attributes:

• 4+ years software engineering experience.
• Coding experience in C++
• Strong technical background
• Linux based environments
• Software Development / Software Engineering and unit testing
• Attention to detail and problem solving skills
• Working in a Agile based environment highly desirable
• Object Orientated Principles and Design patterns
• Experience with other object orientated programming languages would also be highly desirable.
• Any experience with Java and Shell Scripting would also be highly desirable
• Ideally First Class BSc degree in a related field.

In return the client is offering a competitive salary of £50,000 - £60,000 plus:

• Bonus
• Fantastic training if required
• Generous annual leave
• Pension
• Flexible working
• Many more benefits

If this role is of interest please apply today for immediate consideration

Droitwich Spa
33k - 53k (DOE)

As a Senior Control Systems Engineer, you will be responsible for managing projects through their entire lifecycle-from initial concept and design through to documentation, implementation, and commissioning. You will spend approximately two-thirds of your time working in the office on project design, documentation, and team collaboration, and one-third of your time onsite commissioning and troubleshooting systems. This position requires a strong leader who can mentor junior team members, lead project teams, and work independently as well as collaboratively.

Key Responsibilities:

• Manage and deliver control systems projects from initial concept through to commissioning (cradle to grave).
• Develop comprehensive project documentation, including design specifications, testing protocols, and commissioning plans.
• Collaborate with a multidisciplinary team of engineers to ensure project objectives are met.
• Lead onsite commissioning activities, working closely with clients and other stakeholders to ensure successful system integration.
• Provide technical leadership and mentorship to junior engineers, fostering a collaborative and supportive team environment.
• Work independently, demonstrating initiative and decision-making skills to resolve technical challenges.
• Collaborate with other team members to develop innovative solutions and improve project outcomes.
• Ensure compliance with industry standards and company quality procedures.
• Maintain flexibility and adaptability to meet changing project needs and client requirements.

Essential experience:

• Minimum of 1 years of experience as a Control Systems Engineer.
• Proficiency in PLC programming and software development, ideally with Siemens or Rockwell systems; experience with other PLC brands will be considered if skills are transferable.
• Comprehensive experience with the full project lifecycle, including design, development, testing, installation, and commissioning.
• Strong leadership skills, with experience mentoring and leading junior engineers.
• Ability to work both independently and as part of a team, demonstrating flexibility and a collaborative mindset.
• Willingness to travel UK wide (30% travel)

Introduction

Saab in UK is growing rapidly, with over 500 colleagues across eight sites. We bring together Swedish heritage and British expertise to drive innovation in areas such as software engineering, underwater robotics, radars, AI, and armed forces training. Joining Saab in UK means contributing to the security and resilience of society while building a career with real scope for personal and professional growth.

What you will be part of

Explore a wealth of possibilities. Take on challenges, create smart inventions, and grow beyond. This is a place for curious minds, brave pioneers, and everyone in between. Together, we achieve the extraordinary, each bringing our unique perspectives. Your part matters.

Saab is a leading defence and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 26,000 talented people, Saab constantly pushes the boundaries of technology to create a safer and more sustainable world.

Saab designs, manufactures and maintains advanced systems in aeronautics, weapons, command and control, sensors and underwater systems. Saab is headquartered in Sweden. It has major operations all over the world and is part of the domestic defence capability of several nations.

The Role:

You will be part of Sensor Systems UK, working in the Farnborough office. We are a diverse group of professionals and our work culture and organisation values everybody’s opinion - these differences set the conditions for our competitive advantage.

As a Software Test Engineer, you will be responsible for the quality of the software. You’ll sit closely with all the software developers, providing feedback and learning from each other how to achieve the best quality.

In addition to running tests, you will be involved in the development of new tests and the wider testing environment. This will require the acumen to write new code and navigate a complex IT installation.

Role Requirements:

• Reviewing software requirements and prepare test scenarios
• Create and execute tests on the software
• Analyse test results and report back any errors or bugs
• Prepare and release test specifications and test protocols
• Communicate with surrounding teams
• Participate in design review and provide input to requirements, product design and improvements workshops
• Improve automation and efficiency with testing

Qualifications and Experience:

• Experience with software testing in a military or industrial domain.
• Interest in Software and Quality
• Working in a structured way and comfortable creating technical documentation
• Working in an Agile environment
• Safety critical software
• Setup and creation of test environments
• Software lifecycles
• Jira, Jenkins, Git
• Microsoft Office package
• Linux environments
• Various testing types

By submitting an application to Saab UK you consent to undertaking workforce screening activities that may include but are not limited to: Baseline Personnel Security checks, National Security Vetting, reference checks, verification of working rights and in all circumstances preferred candidates will be placed through a security interview.