Liverpool & Warrington | 45 Hours per Week + Overtime | £35,100£51,480 per annum

Are you an experienced Automatic Door Engineer looking for strong earning potential, proper support, and clear progression?

Our client is a well-established independent specialist in automatic and manual door systems, delivering installation, maintenance and repair services across England and Wales. With a strong reputation for quality and reliability, theyre now expanding their engineering team.

This is a field-based role covering England and Wales, attending client sites across the regions.

What can you expect in return?

• 4 weeks holiday plus bank holidays
• Paid birthday leave
• Overtime and overnight stays available
• Company pension scheme
• Bonus scheme for securing new customers
• Company health insurance (after 1 years service), including 24/7 GP access, discounted gym memberships and discounts at supermarkets, restaurants, clothing retailers and more
• Employee Assistance Programme
• Company van and tools provided
• Paid training for qualifications and certifications
• Clear pay progression structure

Are you the right person for the role?

Essential:

• Minimum 3 years experience as an Automatic Door Engineer
• Qualified to BS EN16005 and BS 7036 standards
• Full UK driving licence
• Strong mechanical and electrical skills (including installation and 18th Edition wiring regulations desirable)
• CSCS card
• Strong diagnostic, problem-solving, and technical skills for installing, maintaining, and repairing a wide range of automatic and manual door systems
• Knowledge of safety regulations and health & safety practices (including working at height, manual handling, asbestos awareness)
• Excellent communication, teamwork, and customer service skills
• Ability to work independently and proactively
• Willingness to travel and work at various client sites, including overnight stays if required
• Willingness to undergo an Enhanced DBS check for safeguarded sites

Desirable:

• Experience with Record, Geze, Assa Abloy, Dorma, Kone, or Label systems
• SPA Forecourt qualification
• Working knowledge of planned maintenance and repair of automatic and manual doors, stand-alone access control systems, panic hardware, floor springs, door closers, and locks
• Commitment to continuous professional development

What will your role look like?

• Installation & Commissioning: Fit and commission automatic door systems to specification, testing for correct operation and compliance
• Maintenance & Repairs: Conduct routine inspections, diagnose faults, and carry out effective repairs
• Customer Support: Advise clients on operation and maintenance, respond to enquiries professionally
• Compliance & Safety: Follow all health, safety, and industry standards; stay up to date with regulations and best practices
• Documentation: Maintain accurate service records, produce reports for clients and internal teams
• Training: Guide clients and colleagues on the correct use and upkeep of systems

Whats next?

Its simple click APPLY today. We look forward to hearing from you!

Location: Broughton, FlintshirePay Rate

• £27.75 per hour PAYE
• £36.70 per hour Umbrella

Contract Details

• Contract role - inside IR35
• Long-term opportunity, likely to be extended
• Night shift working pattern

Shift Pattern

• 12-hour night shifts (7pm-7am)
• 3 days on / 4 days off
• 38% night shift uplift
• Paid overtime available over 35 hours (premium rates apply)

The Opportunity

Carbon60 are looking for an experienced NC Programmer to join their client’s high-profile Manufacturing Engineering team within a fast-paced aerospace production environment. Working on night shift as part of a lineside support team, you will play a key role in supporting production, resolving technical issues, and driving continuous improvement across machining operations.

This role is ideal for a Manufacturing Engineer or NC Programmer who enjoys hands-on problem solving in a live production environment and thrives in a collaborative, engineering-led setting.

Key Responsibilities

• Provide lineside support within a manufacturing station environment
• Define and develop NC programs in line with Engineering and Manufacturing specifications
• Support the specification of jigs and tooling, including numerical simulations
• Validate, optimise and test NC programs prior to release
• Integrate NC programs via DNC systems or directly on machines
• Support demonstration tests alongside Production, Quality and Work Preparation teams
• Produce supporting technical documentation including instruction sheets and simulations
• Contribute to continuous improvement and longer-term efficiency projects

About You

• Minimum NVQ Level 4 / HNC (or equivalent)
• Background in Manufacturing Engineering or NC Programming
• Experience working in a production or shop-floor support environment
• Previous experience using CATIA and SAP is highly desirable
• Understanding of aircraft or complex assembly build philosophy is advantageous
• Comfortable working night shifts in a fast-paced manufacturing setting

Apply

If you are an experienced NC Programmer looking for a well-paid nightshift contract within an aircraft manufacturing environment, we’d like to hear from you.

Apply now with your CV and a consultant will be in touch.

Guidant, Carbon60, Lorien & SRG - The Impellam Group Portfolio are acting as an Employment Business in relation to this vacancy.

Wrexham Permanent Excellent Salary + Benefits

Are you ready to work on software that powers real-world products? Whether you’re an experienced Embedded Engineer or at the beginning of your career, this is an opportunity to join a highly regarded engineering team developing transmission control software for cutting-edge gearboxes. Based in scenic North Wales, this role offers more than just technical challenge, it offers the chance to see your work go from concept to production and out into the world.

Why Join?

This is a team where you won’t be siloed. With a lean team structure, you’ll gain exposure to multiple aspects of projects, from embedded software development to machine testing and even test equipment manufacture. The variety keeps things interesting, and the impact of your work is visible. You’ll be part of a forward-thinking engineering environment that values continuous improvement and innovation. It’s a place where your ideas are welcomed, and your development is supported.

What You’ll Be Doing

• Designing and developing transmission control software in Embedded C
• Translating functional requirements into high-level and low-level software designs
• Working within a structured V-model development process
• Creating V&V test cases and automated validation scripts (Python or VTest Studio)
• Debugging and fault-finding across both hardware and software
• Collaborating closely with a dedicated, multi-disciplinary engineering team

What We’re Looking For

• Degree in Software Engineering or a STEM subject (HND/HNC considered with relevant experience)
• Experience within an embedded systems environment
• Strong C or C++ programming skills
• Experience developing applications for control systems
• Familiarity with structured development processes and SCM tools
• Strong communication skills
• Experience with Vector tools (CANalyzer, CANoe, CANape) or Atlassian suite is advantageous

Based near Wrexham in picturesque North Wales, you’ll enjoy a strong work-life balance alongside meaningful, technically challenging work.

If you’re looking for a role where you can develop innovative embedded software, see products through to production, and work in a collaborative, improvement-driven environment, we’d love to hear from you.

Apply today to help shape the future of transmission technology.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included.

Fire and Security Engineer - Bristol - £32,000- £45,000 Per Annum

Fire and Security Engineer Package Overview:

• £32,000 - £45,000 Basic Salary + Overtime (Negotiable depending on experience)
• Full-Time, Permanent
• Monday to Friday Hours
• Area Covered: Bristol & the Surrounding Areas (SW)

Company Overview - Fire and Security Engineer

Our Client are currently looking for a Fire and Security Engineer to join their highly valued team on a full-time, permanent basis.

With many years’ experience in the industry, they’re entering another period of growth and are looking to expand their team due to customer demand.

Fire and Security Engineer Role and Responsibilities:

• Installation, Service, Repair, Fault-finding & Maintenance of Fire Alarms, Intruder Alarms, CCTV & Access Control Systems
• Field based role, covering a number of sites
• Working on a range of brands of manufacturer
• Take responsibility for the overall quality of the work delivered
• Carry out effective communication with customers at all times
• Ensure tasks are completed efficiently
• Providing support to team members where required

Fire and Security Engineer Skills and Experience Required:

• A full UK driving licence or equivalent (Essential)
• A drive and enthusiasm to grab hold of opportunities
• Ideally you will have at least 3 years’ experience working within the Fire and Security Sector
• Considering applicants with all or single discipline providing you are willing to train
• Knowledge of a range of manufacturers
• Desirable qualifications include: IPAF, CSCS/ ECS, FIA and/or City & Guilds
• A positive attitude and the ability to self-motivate is a must

Benefits of this Fire and Security Engineer position include:

• Competitive basic salary of up to £45,000 per annum (Negotiable depending on experience)
• Company vehicle & fuel card
• Plenty of overtime available if wanted
• Opportunity to earn more money via the on-call rota
• Annual leave provided
• Pension scheme
• On-going training opportunities
• Travel Pay

DON’T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW

Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers

Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.

Role Overview

An exceptional opportunity has arisen for a Principal Mechanical Engineer to join a major programme developing next-generation Small Modular Reactor technology. This role offers the chance to work at the forefront of advanced nuclear engineering, contributing to one of the most innovative and high-profile clean-energy initiatives in the world. Engineers who are currently operating at Senior level and are ready to step up into a principal role will also be considered.
Key Responsibilities

• Lead the design and analysis of mechanical systems central to SMR performance, including pressure systems, thermal-mechanical components, and plant-wide mechanical assemblies.
• Act as Technical Authority for mechanical engineering, providing oversight, verification, and approval of design outputs.
• Ensure all work aligns with nuclear safety principles, regulatory expectations, and SMR-specific design requirements.
• Lead the development and substantiation of safety-classified mechanical systems, producing evidence to support safety case submissions.
• Conduct and review HAZOP, FMEA, reliability assessments, and stress/thermal analyses.
• Manage project delivery across multidisciplinary teams, ensuring outputs meet quality, cost, and schedule expectations.
• Engage with clients, regulators, and stakeholders, representing mechanical engineering interests in design reviews and technical discussions.
• Drive innovation in advanced nuclear mechanical systems, contributing to the evolution of SMR technology and engineering best practice.

Required Experience

• Extensive experience in nuclear mechanical engineering or other highly regulated, safety-critical industries.
• Strong understanding of safety-classified equipment, substantiation, and safety case requirements.
• Proven ability to lead engineering teams delivering complex mechanical design packages.
• Experience with pressure systems, thermal-mechanical design, and plant mechanical infrastructure.
• Familiarity with UK nuclear regulatory bodies, standards, and relevant BS/EN/ASME codes.

Desirable ExpertiseExperience in one or more of the following areas would be highly advantageous:

• Water systems - cooling circuits, heat exchangers, reactor support systems.
• Material handling - lifting, transport, and remote handling systems used in nuclear environments.
• Rotating machinery - pumps, turbines, compressors, or other high-integrity rotating equipment.

Preferred Qualifications

• Chartered Engineer (CEng) or working toward chartership.
• Degree in Mechanical Engineering or a related discipline.
• Experience with digital engineering tools, modelling platforms, or nuclear-specific analysis software.

SummaryThis is a rare opportunity to contribute to a landmark SMR programme, working on advanced technologies that will define the next generation of clean, secure, and scalable nuclear power. Senior engineers with the ambition to step into a principal-level role are strongly encouraged to apply.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found at hays.co.uk

An exciting opportunity has arisen for a Cheshire based Electronics Maintenance Engineer to join this leading provider of electronic design and assembly services.

Based at their site in Cheshire they are seeking an Electronics Maintenance Engineer to be responsible for maintaining a wide variety of high tech assembly equipment along with general infrastructure maintenance.

**This Cheshire based company operate a 4x day working week, Monday to Thursday 7am to 5pm.**

Key skills required for Electronics Maintenance Engineer:

• Maintenance of surface mount and associated assembly machinery, including; Juki and Europlacer placement machines; Reflow Ovens, Solder Paste Printers and Automatic Optical Inspection.
• Generation of clear and comprehensive maintenance records for traceability purposes.
• Liaison with external Service Engineers to arrange site visits to conduct annual service and calibration of machinery.
• Maintenance, and supervision of specialist contractors, for building services including heating, electrical, water, compressed air and nitrogen.
• Management of test schedules and associated records to meet statutory requirements for specific equipment and infrastructure.

This is a great opportunity for someone to join a growing organisation.

APPLY NOW! Please send your CV to , or for more information contact Adam on 01582 878821

£40,000 - £45,000

Wrexham

2x Shift (Earlies/Lates)

gap technical are proud to be representing this global manufacturing business in their search for a Maintenance Engineer / Technician to work at their facility based near Wrexham

Performance Objectives

• You will be the engineering expert for automatic vision inspection, labelling and deep-draw blister packaging for containers, which will be presented in glass ampoules, vials and cartridges.
• Duties will include end of day and end of batch strip downs of equipment to facilitate cleaning, rebuilds after cleaning and adjustments to ensure that inspection and packaging activities run smoothly and meet the output requirements of the busy manufacturing environment.
• Preventative Maintenance is also a key duty with all PM being performed in accordance with site procedures.
• You will be able to work on your own or as part of the Inspection & Packing team in accordance with Good Manufacturing Practice (GMP). This is a position for a dynamic, motivated and enthusiastic engineer with strong mechanical knowledge.
• Electro-mechanical experience is desirable but not essential. Training will be delivered by current Inspection & Packing Engineers under the current training programme.

Person Specification

• Experienced in providing engineering support in an Inspection & Packing department.
• You will hold a recognised Engineering Apprenticeship/HND/HNC/degree in an engineering discipline.
• You will be competent in working alone or as part of a team and have excellent diagnostic, rectification and communication skills.
• A thorough understanding of pharmaceutical engineering and regulatory requirements in essential.

Apply

Please send your CV via the Apply now option on the website

If you have any questions or are interested in any other opportunities we may have, please do not hesitate to get in touch

This vacancy is being advertised on behalf of gap technical who are operating as an employment agency.

gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.

Closing Date: 24/03/2026

‘By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy.’

£50,000
Deeside
Continental Days/Nights (2days/2nights/4off)

gap technical are proud to be representing an established manufacturing business in their search for a Multi-skilled Maintenance Engineer to work at their facility based in Deeside.

Performance Objectives

• Promote and Carry out Preventative Maintenance
• Ensure all machines are safe and fit for purpose
• Undertake repairs and servicing to the highest standard in accordance with work requests and pre-determined specifications
• Overhaul and upkeep and repair of all plant machines
• Installation of new machines and equipment when required
• Actively promote safe working practices
• Review and Advise on Engineering requirements
• Work with and Coordinate Contractors as and when required
• To contribute to company objectives and values
• To adhere to Company Rules / Health and Safety / Environmental Standards and Practices
• To attend training and continuous development opportunities as required.
• Continuously look for improvements to the service and for effective good practice within the role.
• Alignment with the company’s core values

Person Specification

• Works well under pressure
• Good verbal and written communication skills
• Technical knowledge of food process equipment and wrapping machines
• Excellent understanding of how the machinery that they are working with operates.
• To have excellent diagnostic and problem solving skills.
• Good interpersonal and management skills are always an asset.
• Welding/fabricating skills (desirable)

Apply

Please send your CV via the apply now option

If you have any questions or are interested in any other opportunities we may have, please do not hesitate to contact us.

This vacancy is being advertised on behalf of gap technical who are operating as an employment agency.

gap technical are committed to the selection, recruitment and development of the best people, basing judgements solely on suitability for the job.

Closing Date: 25.03.2026

‘By applying for the above position and providing your personal data to us you understand that your data will be processed in line with our Privacy Policy.’

£35,000 - £42,000 + Overtime + Training + Progression + Field Based + Company Van + Personal Use + Fuel Card + Enhanced Holidays

North West

Are you a security systems Installation technician in Liverpool, looking to join a growing company who will reinvest in developing your career and skillset?

This company work with systems such as Paxton and Honeywell, installing Automated Gates and Barriers to commercial and industrial clients across the UK. They manage a full engineering team to carry out installations, commissioning and servicing, providing a full project management cycle.

On offer is the opportunity to become a vital asset to the growth of the company. You will undertake training on multiple systems and security gates. The ideal candidate will be able to travel around the UK, carrying out the Installation of pre-built and bespoke security systems/equipment.

This role would suit an installation engineer in the security industry, looking to progress their career and develop their skillset in a UK leading security gates company.

The Role:

• Service and maintenance of Security systems including security gates, fences, and bollards
• Troubleshooting, system configuration, routine maintenance
• Travel to client sites around the UK
• Effective communication with clients and training on how to use the systems, once they are operational
• Adhere to safety regulations and industry standards

The Person:

• Experience in a security system installation role
• Full UK driving licence

If you are interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

Keywords: Security Systems, Security, Mechanical, Security Gates, Electrical, Paxton, Honeywell, Engineering, Installation, Technician, Liverpool, Manchester, M62, Field Based

Reference Number: BBBH24175

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

You’re not just designing control systems, you’re engineering the automation that keeps modern manufacturing moving. Based on site in Wrexham, this is an opportunity to design, develop and implement innovative industrial control and automation solutions within a forward-thinking engineering environment. If you enjoy ownership, problem-solving, and delivering high-quality engineered solutions, this role puts you at the centre of it.

BASIC SALARY: Up to £39,000

BENEFITS:
· Early finish on Fridays - circa 20 Fridays off per year
· Enhanced employer pension contributions
· Reduced gym memberships
· Health cashback scheme
· Employee Assistance Programme
· Subsidised on-site canteen

LOCATION: This role is based on site in Wrexham

COMMUTABLE LOCATIONS: Chester, Deeside, Oswestry, Ellesmere, Whitchurch, Crewe, Shrewsbury, Mold, Rhyl, Market Drayton, Nantwich, Runcorn, Liverpool

JOB DESCRIPTION: Mechatronic Engineer - Industrial Automation, Manufacturing

As our Mechatronic Engineer, you’ll design, develop and implement electrical control systems and automation solutions within an industrial environment. Working on site in Wrexham, you’ll be responsible for control panel design, PLC/HMI development, system integration, and technical documentation, ensuring solutions are compliant, efficient, and delivered to high engineering standards.

This role combines electrical design, automation programming, and hands-on technical problem-solving within a collaborative project environment.

KEY RESPONSIBILITIES: Mechatronic Engineer - Industrial Automation, Manufacturing

· Design and develop electrical control systems, control panels, and industrial schematics
· Develop, configure and test PLC and HMI applications (Keyence, Omron, Beckhoff or similar)
· Integrate sensors, actuators, drives, motion systems and industrial networks into complete automation systems
· Produce technical drawings, schematics, BOMs and supporting documentation using CAD tools (AutoCAD Electrical, EPLAN)
· Support commissioning, troubleshooting and system optimisation activities
· Contribute to project planning, design reviews and delivery schedules
· Ensure all designs meet relevant electrical standards and safety requirements

PERSON SPECIFICATION: Mechatronic Engineer - Industrial Automation, Manufacturing

To be successful in your application, you’ll need strong technical grounding in electrical and control systems engineering within an industrial or automation environment. You’ll enjoy working across multiple projects and taking ownership of delivering high-quality engineering solutions.

You will be able to demonstrate experience with:
· Electrical control system design and control panel development
· PLC programming and HMI development (Keyence, Omron, Beckhoff or similar)
· Industrial automation systems, sensors, actuators and safety circuits
· Industrial communication networks (e.g. Ethernet/IP)
· CAD tools such as AutoCAD Electrical or EPLAN
· Degree or HNC/HND in Electrical Engineering, Control Systems Engineering, or a related discipline is required.

You’ll also bring strong analytical skills, attention to detail, effective communication, and the ability to work collaboratively within a multidisciplinary engineering team.

THE COMPANY:

We manufacture top of the range products from office printers, to industrial machining centres. We have won awards for our carbon neutral recycling facilities in Europe. We invest in our staff and promote growth within our business.

PROSPECTS:

As an international business, we offer the opportunity to work across the globe and support progression within the company.

It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Mechatronic Engineer, Electrical Design Engineer, Controls Engineer, Automation Engineer, Control Systems Engineer, PLC Engineer, Industrial Automation Engineer, Special Purpose Machinery, Manufacturing Automation, Control Panel Design, PLC programming (Keyence, Omron, Beckhoff), HMI development, industrial networks (Ethernet/IP), sensors, actuators, drives, motion systems, AutoCAD Electrical, EPLAN.

INTERESTED? Please click apply. You will receive an acknowledgement of your application.

Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives.

Please Note: Wallace Hind Selection have been chosen as the recruitment partner of our client.

REF: SM18403, Wallace Hind Selection

We are looking for an Engineering Manager to work on a permanent basis in Liverpool and Blackburn.

Salary is c£65-75,000 per annum plus company car, 25 days’ holiday plus bank holidays, healthcare and life assurance, pension etc.

Duties for the Engineering Manager role;

An established multi-site manufacturing business is seeking an experienced Engineering Manager to take full ownership of the maintenance function across two operational sites. This senior leadership role is accountable for defining and delivering the maintenance strategy, optimising plant performance, and leading machinery upgrade and capital investment programmes.

The successful candidate will play a key role in driving operational efficiency, asset reliability, and compliance, while contributing to wider business strategy alongside senior leadership.

Key Responsibilities for the Engineering Manager

Leadership & People Management

• Lead, manage, and develop a multi-site maintenance team, ensuring effective deployment of resources and skills.
• Plan and allocate daily maintenance activities to support production requirements.
• Identify capability gaps and work with HR to ensure appropriate training, development, and competency records are maintained.
• Provide cover for the Maintenance Supervisor where required.

Quality & Trade Assurance

• Ensure engineering and maintenance activities comply with site quality systems.
• Implement and maintain procedures that support legislative and trade assurance compliance.

Strategic Contribution

• Contribute to the development and execution of the wider business strategy.
• Work closely with senior management and Board-level stakeholders to support operational and commercial objectives.

Professional Standards

• Act as a professional ambassador for the business at all times.
• Comply fully with company policies, procedures, and governance requirements.
• Undertake additional duties appropriate to a senior engineering leadership role as required.

Person Specification

Essential Requirements

• Proven experience influencing and building effective relationships across operational and senior leadership teams.
• Demonstrated leadership capability, with a track record of managing, developing, and holding teams accountable.
• Strong organisational and planning skills, with the ability to manage complex, competing priorities.
• Confident and credible communicator, effective at both strategic and operational levels.
• Strong commercial and financial acumen, with clear understanding of cost control and performance drivers.
• In-depth knowledge of health and safety legislation and best practice, ideally supported by a recognised qualification (e.g. IOSH Managing Safely).

Desirable

• Experience within a regulated manufacturing environment, ideally food or animal feed.
• Exposure to multi-site operations and capital project delivery.

How to apply for the Engineering Manager role:

Please call Rebecca at Simply Recruitment Group or press APPLY NOW!

£55,500 Per Annum + Bonus & Excellent Benefits
4 on 4 off 2 days/2 nights
Crewe

Gap Technical are currently recruiting for a proactive, technically skilled, and hands-on Multi-Skilled Electrically biased Engineer to join an established manufacturing business. This is an exciting opportunity to make a real impact in a fast-paced, forward-thinking environment, where you will have the chance to shape engineering strategy and contribute to an ongoing transformation.

Performance Objectives

• Deliver the site engineering strategy, ensuring production runs efficiently, reliably, and on target
• Maintain and enhance technical capabilities across electrical, mechanical, and automation systems
• Diagnose faults across electrical control systems (Allen Bradley, Siemens)
• Carry out mechanical maintenance on pumps, valves etc
• Ensure compliance with H&S, steam systems, effluent processes, and all relevant regulatory requirements
• Balance reactive and proactive tasks, contributing to preventative maintenance (PM) completion and GMP standards

Person Specification

• Experience in fast-moving, clean, high-tech production BRC regulated industry
• Strong technical competency in both electrical (PLC, drives, automation) and mechanical systems (pumps, pneumatics, hydraulics, valves, thermal processes)
• The ability to diagnose faults, prioritize effectively, and know when to seek support
• A proactive and independent mindset, with the confidence to share your ideas and challenge existing processes
• Qualifications: Apprenticeship (Electrical or Mechanical), BTEC/C&G in Engineering, H&S qualification
• Knowledge of Asbestos, Legionella, DSEAR, and Pressure Systems
• Effluent/Water Treatment/DAF Plant experience highly desireable

Apply
To apply, please send your CV via the Apply Now option. For further information or to discuss other opportunities, feel free to reach out.
Gap Technical is operating as an employment agency in relation to this vacancy. We are committed to equal opportunities and welcome applications from all suitable candidates.
Closing Date 26/03/2026

Are you an experienced Refrigeration Engineer who can provide support to environmental systems and equipment for major Automotive, Aerospace, Pharmaceutical and Scientific sites in Staffordshire and Cheshire?

BASIC SALARY: Up to £44,000 basic

BENEFITS:
· Paid Overtime
· 26 Days Holiday & Bank Holidays
· Company Van
· No standby
· 4% Pension (rising with service)
· Discretionary company bonus

LOCATION: Home based - Stoke on Trent

COMMUTABLE LOCATIONS: Warrington, Knutsford, Macclesfield, Congleton, Crewe, Stone, Northwich, Winsford, Nantwich, Altrincham.

WHY YOU SHOULD APPLY:

· You will be paid door to door, predominantly covering the area from Stoke to Warrington
· Working Monday - Friday, great hours (08:00-16:30 standard) - this is rare in the refrigeration industry!
· You will experience a variety of different customer sites - Automotive & Pharmaceutical giants, Tier 1 Aerospace and more
· We are constantly developing new environmental test chambers, so your role will be ever changing and challenging

THE ROLE: Refrigeration Engineer, Service Engineer, FGAS, Electrical, ODS

As our Engineer, you’ll be working as part of a sizable national refrigeration service and install team (over 20 Engineers), usually covering the area in between Stoke - Warrington. You know you will be home every night and that’s important to you.

On rare occasions you may be asked to help further afield to cover holiday/sickness, but only in extreme circumstances. There is paid overtime.

No two days will be the same, you will support on installation, planned service and fault-finding reactive diagnostics work covering controllers, refrigeration circuits, cooling issues, PLC updates, valves and calibration work - so there will be plenty of variety for you.

You will be managed by an experienced hands-on service manager who joined the business as an apprentice and is now leading the engineering team.

YOUR RESPONSIBILITIES: Refrigeration Engineer, Service Engineer, FGAS, Electrical, ODS

· You’ll be competent electrically and mechanically on suitable refrigeration circuits and climatic systems
· You’re happy with some installation work, but predominately service and fault-finding / diagnostics
· You’ll be happy working alone or as part of a team post your product and systems training

YOUR BACKGROUND: Refrigeration Engineer, Service Engineer, FGAS, Electrical, ODS

· You will be experienced electrically and mechanically, ideally qualified 18th edition and have your FGAS & ODS Regs 2079
· Your practical work experience will cover commercial / industrial refrigeration, chillers or similar
· If you have cascade experience - that would be advantageous but is not essential

THE COMPANY:

We are a global manufacturer of environmental test chambers covering off the shelf and bespoke solutions. Our customers base covers global automotive and aerospace giants, pharmaceutical and life sciences.

It is highly likely you will have worked in any of the following roles and/or markets and worked with the following products and/or services: Refrigeration Engineer, Service Engineer - FGAS, electrical, cascade, electronic, install, diagnostic, pipework, piping, brazing, soldering, chamber, calibration, cooling, coolant, solenoid valve, environmental, test, commissioning, climatic, Sanyo, Gallenkamp, Votsch, ODS, ozone.

INTERESTED? Please click apply. You will receive an acknowledgement of your application.

Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives.

Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct.

REF: JAC18405, Wallace Hind Selection

Help Shape the Future of High-Regulated Systems – Expert Senior EC&I Engineer Needed!

Our Client has a requirement for a Senior EC&I Engineer, who will be required to work on a contract basis in Warrington.

Role Purpose:

• Support the discipline Lead Engineer by providing technical delivery of schedule items.
• Provide relevant engineering underpinning through collaboration with a multi-disciplinary team and wider industry stakeholders.
• Oversee the translation of complex user requirements into fully engineered, safe, and legal design solutions.

Job Role Responsibilities:

• Deriving high-level engineering solutions through structured optioneering processes and the down-selection of instrumentation/remote handling systems.
• Developing engineering specifications, including structured requirements management and validation.
• Determining data requirements for tracking and records management capabilities in accordance with regulatory requirements.
• Defining critical interfaces between Operational Technology (OT) and Information Technology (IT) systems.
• Producing comprehensive design drawings and documentation at all applicable stages of the gated design process.
• Engaging other disciplines and stakeholders at key lifecycle points while maintaining awareness of project management fundamentals.
• Ensuring all deliverables are completed in line with rigorous checking and approval processes.

Experience / Skills / Knowledge / Qualifications:

• Related engineering discipline (Electrical & Electronic / Controls & Instruments). Degree qualification and Professional Registration (IET, IoP, InstMC) are highly desirable.
• Significant demonstrable experience in EC&I project delivery within highly regulated industries (e.g., Nuclear).
• Strong understanding of legislative and regulatory environments, including the Nuclear Installations Act, HASAWA, EWR, and IRR.
• Experience in process instrumentation systems and determining solutions for data management capabilities prior to IT/OT delivery.
• Soft Skills: Excellent communication and interpersonal skills, with the ability to work individually or as part of an integrated delivery team under restrictive time constraints.
• Experience with nuclear encapsulation, functional safety (TUV), BS 7671:2018 (18th Edition), AutoCAD 2D, and specific gated process training (Design Change Awareness/Checking & Approvals).

Company information

At First Recruitment Group we understand just how important it is to secure the right people. That is why our Recruitment Consultants always take the time to understand requirements in detail and offer sound advice to both clients and candidates. We actively recruit at all levels and this is a superb opportunity for a Senior EC&I Engineer looking for new employment.

As part of putting people first, we strive to be an equal opportunities employer and we are always looking to increase the diversity of our workforce, working closely with our clients to ensure everyone is included.

Location: Wrexham

Days - Monday to Friday

Salary: £50,000 + Pension + Excellent Benefits

Reference: Jo6903/LW The Company

An excellent opportunity has arisen with one of the UKs instantly recognisable FMCG manufacturers, a leading manufacturer, specialising in food manufacturing.Benefiting from continuous improvements to all the manufacturing processes the group will in turn generate further expansion of this already rapidly growing organisation, which has been established for over 35 years with an international presence.

The Role

Supporting the Projects Manager with the planning, building, installation and commissioning of all elements of new build project work across the Group.

• Ensuring there is a safe environment for those who work in, or visit, any of our manufacturing facilities.
• Identifying and delivering against opportunities to implement changes and continuous improvement projects to maximise plant efficiencies and energy optimisation.
• Managing projects contractor performance whilst on site to ensure the most effective and efficient fix.
• Supporting the introduction of new equipment to our market-leading production facilities as part of our continued drive for innovation.
• Building effective relationships and communicating clearly with stakeholders, managing expectations where required.
• Continuous professional development through industry specific training.
• Working with our technical team to ensure audit readiness at all times.

Essential

Demonstrable experience within a similar project engineering role, including the planning and delivery of new installations

Demonstrable hand-on experience of project planning, including the administration associated with production and presentation of GANTT charts, timelines, project plans, etc.

Time served multi-skilled engineer as this role will require hands-on support

Great communicator

A true problem solver in all areas.

If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible.

ETS Consulting Ltd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.

ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 24 Broad Street, Salford, Lancashire, M6 5BY.

If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

Are you a Control Systems Engineer ready to take on exciting, high-profile projects in the North West?

We re working with a fast-growing, independent automation specialist delivering advanced control solutions to leading names across food and beverage, pharma, utilities, and high-security sectors such as defence, aerospace, and nuclear. Known for embracing complex challenges and driving innovation, they are expanding their team to meet a strong pipeline of upcoming projects.

Control Systems Engineer

£40,000 £70,000 DOE + Pension + Healthcare + Life Assurance

Excellent training & development opportunities.

North West. Ref: 23822

Controls Engineer - The Role:

• Design, configure and develop PLC systems for a range of industrial automation projects
• Produce functional design specifications and test documentation (FDS, FAT/SAT)
• Manage full project life cycles from initial design to on-site commissioning
• Liaise with clients and subcontractors to ensure seamless delivery.
• Travel across the UK (c20%) to support commissioning and client interaction.

Controls Engineer - The Person:

• Solid experience in real-time control systems design and commissioning.
• Proficient in PLC programming (Rockwell, Siemens, Mitsubishi, Schneider).
• Previous experience within a systems integrator environment
• Comfortable managing documentation and project processes.
• Degree-qualified (or equivalent experience) and a full UK driving licence.

We are keen to see Control Systems Engineers with experience of the following packages:

• PLC Software Rockwell, Siemens, Mitsubishi, Schneider
• HMI/SCADA Software Rockwell FTView ME & SE, AVEVA InTouch & System Platform, Schneider ClearSCADA GEiFIX, Siemens WinCC

This is an excellent opportunity to join a business with a heritage of over 100 years and a current order book approaching £1Bn. They offer a clear career path, on-going professional training including Chartership and a collaborative working environment.

Preferably you will be degree qualified with background in a similar role. Strong communication skills are needed along with a full UK valid driving licence.

For further information please contact Sharon Hill.

AE1

Employment Type: Full-time, permanent
Hours: 38.75 hours per week
Shift Pattern: Rotating 3-shift system

• Week 1: 06:00 – 14:15
• Week 2: 14:00 – 22:15
• Week 3: 22:00 – 06:15
• 1 in 3 Sundays: 06:00 – 14:00 (mandatory)

Shift Allowances:

• Early & late shifts: +£0.20 per hour
• Nights: +25%
• Sundays: Time and a half

Salary: £41,300 – £45,700 per annum (depending on experience)
Benefits: Pension scheme, financial wellbeing support, salary access app

The Role

We are seeking a Multi-Skilled Maintenance Engineer to join a highly automated, technically advanced engineering environment. This is a hands-on role supporting both preventative planned maintenance (PPM) and breakdown response, working across a mix of modern and legacy automation systems.

The business is investing heavily in new technology, equipment, and internal engineer development, making this an excellent opportunity for someone looking to grow, mentor others, and progress within a sophisticated engineering operation.

Key Responsibilities

• Carry out PPM and reactive maintenance across automated production and warehouse systems
• Electrical fault-finding including safe isolation, testing for dead, continuity and polarity checks
• Mechanical maintenance including pneumatics, motors, chains, and conveyors
• PLC fault-finding using plug-and-play systems (Siemens experience advantageous)
• Work on control panels, inputs and outputs
• Support facilities and building maintenance as required
• Generate accurate maintenance records, reports, and spares documentation
• Work collaboratively with contractors and internal teams to meet operational timelines
• Support and adapt to departmental change under new management
• Step up to mentor and support colleagues when required

Equipment & Systems You’ll Work On

• Conveyor systems and motorised rollers
• Automated pickers and storage & retrieval systems
• Lidding, strapping, bagging and printing machines
• Tote cranes, shuttles, lifts, and production lines
• Mix of newer and advanced legacy automation equipment

About You

• NVQ Level 3 in Electrical or Mechanical Engineering (or equivalent)
• Multi-skilled background (70/30 mechanical considered if electrically competent)
• Strong electrical safety knowledge and fault-finding ability
• Experience in a factory, manufacturing, or automated warehouse environment
• Comfortable working at heights and physically fit
• Confident working on electrical panels
• Willing to take on responsibility and support leadership when needed
• High attention to detail and honest, reliable work ethic

What We’re Looking For

This role would suit an engineer who:

• Enjoys working in a technically advanced environment
• Is open to change and continuous improvement
• Wants to be a key part of a close-knit engineering team
• Is ready to step up, mentor others, and progress long-term

Salary: £51,000 + Pension + Overtime

Continental Shift 4 ON 4 OFF 2 DAYS 2 NIGHTS - Food Manufacturer

Location: Wrexham

Reference: Jo6952/LW

The Company

An excellent opportunity has arisen with one of the UKs instantly recognisable FMCG manufacturers, a leading manufacturer, specialising in food manufacturing.Benefiting from continuous improvements to all the manufacturing processes the group will in turn generate further expansion of this already rapidly growing organisation, which has been established for over 35 years with an international presence.

Key Skills

Apprentice Trained Engineer in Electrical or Mechanical Engineering

Experience of PLC Systems & Automated Machinery

Understanding of PPM Systems

The Roles

The successful candidates will be responsible for all aspects of day-to-day electrical and mechanical engineering and maintenance activities ensuring work is carried out to the highest standards and maximizing machine efficiencies. The ideal candidates will come from an electrical or a mechanical engineering background and should be able to work on their own initiative, be a time served engineer but multi-skilled and have fast moving manufacturing experience. If you have worked PLC systems, lean manufacturing systems and PPM systems would be advantageous. Also, able and willing to work on ovens, sealing machinery, gearboxes, pumps, general mechanical work and other manufacturing machinery. There is a huge amount of training on offer, so the successful candidate will be in line to broaden their skills considerably.

If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible.

ETS Consulting Ltd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.

ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.

If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

Overview

We’re seeking an experienced EC&I Engineer to join a forward-thinking engineering team working across complex industrial projects. This role is ideal for someone who thrives in multidisciplinary environments and enjoys taking ownership of electrical, control, and instrumentation engineering activities from concept through to commissioning.

Key Responsibilities

• Design & Specification Produce detailed EC&I designs, technical specifications, and engineering documentation for new installations and system upgrades.
• Project Delivery Support full project lifecycle activities including design reviews, procurement, FAT/SAT, installation, and commissioning.
• Control Systems Develop and review control philosophies, PLC/SCADA architectures, and system integration requirements.
• Instrumentation Selection Specify field instrumentation, sensors, and control devices appropriate for process and environmental conditions.
• Compliance & Standards Ensure all designs meet relevant industry standards, safety regulations, and internal quality procedures.
• Stakeholder Coordination Work closely with mechanical, process, and project teams to deliver integrated engineering solutions.
• Site Support Provide technical support during installation, commissioning, troubleshooting, and handover.

Skills & Experience

• Degree or equivalent in Electrical Engineering, Control Engineering, or a related discipline.
• Strong understanding of PLC/SCADA systems and industrial automation.
• Experience with instrumentation selection, calibration, and loop checking.
• Knowledge of functional safety and relevant standards (e.g., IEC 61508/61511).
• Ability to produce high-quality technical documentation and drawings.
• Strong problem-solving skills and the ability to work independently or as part of a team.

Desirable

• Experience in sectors such as energy, manufacturing, water, pharma, or process industries.
• Familiarity with AutoCAD, EPLAN, or similar design tools.
• Knowledge of ATEX / hazardous area compliance.

What This Role Offers

• Opportunity to work on technically challenging, high-impact engineering projects.
• Professional development and exposure to cutting-edge automation technologies.
• A collaborative environment with strong engineering support.

What you need to do now
If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV, or call us now.
If this job isn’t quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found at hays.co.uk

Location: Bromborough & Customer Sites

Salary: £60,000 - £65,000 + Pension + Benefits Days Based - Monday to Friday

Reference: Jo6907/LW

The Company

My client is one of UKs leading manufacturers of turnkey machinery solutions to a wide variety of fast moving manufacturing industries. They have over 100 employees on site in Bromborough. With a growing presence, the group has gone from strength to strength over the last decade to become centre of excellence within a variety of food machinery solutions to the manufacturing industry. Due to further expansion within the British market, they have the need to recruit an additional software PLC engineer.

Key Skills

• HNC/HND or Equivalent Electrical Engineer
• PLC Programmer, ideally with Automated Process Machinery
• Understanding of FMCG Industry

The Role

Develop,test,andcommissionPLCandHMIsoftwareforprocessingandpackaging equipment. Establishandmanagearemotesupportsystemforengineersandcustomers.Provideremoteandon-sitesupportdiagnosingfaults,guidingrepairs,andimplementing software updates. TravelacrosstheUK & Ireland(approx.4050%)forcommissioning,integration, andtechnical support. Collaboratewithmechanical,electrical,andprojectteamsoncompleteautomationsolutions. Maintain software documentation, system standards, and remote access procedures.

Ensurecompliancewithelectricalandsafetystandardsandcontributetocontinuous improvement. Ideally you will be an experiencedPLCProgrammer/AutomationEngineerwithstrongelectricalknowledge. SkilledinSiemensS7/TIAPortal,Allen Bradley,Mitsubishi,Fuji,Lenze.

Backgroundincapitalequipment,packaging,orprocessautomationwouldbeadvantageous. This is a fantastic opportunity, within an extremely secure organization, with the ability to develop your skills at the cutting edge of automated process manufacturing technology.

If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible.

ETS Consulting Ltd Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.

ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no 06164846. Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.

If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom.

MULTI-SKILLED MAINTENANCE ENGINEER

Job Title - Multi Skilled Maintenance Engineer

Location - Birkenhead

Salary: £46,000-£48,000

Shift: Mon- Fri

Week 1- 6:00- 14:00

Week 2- 14:00- 22:30

Job Role of the Multi Skilled Maintenance Engineer.

A superb opportunity has arisen for a Multi Skilled Maintenance Engineer to join a supportive and collaborative engineering team within a busy manufacturing site. The company prides itself on a positive working culture where teamwork and mutual respect are at the center of daily operations.

You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery.

Sector - Industrial Manufacturing

Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer

• Multi-skilled maintenance experience within an industrial manufacturing environment.
• Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory.
• Electrical qualification

Essential requirements for the Multi Skilled Maintenance Engineer.

• Electrical and mechanical fault-finding experience.
• Experience working within a manufacturing environment.

Desirable Requirements for the Multi Skilled Maintenance Engineer.

• Previous experience working as a Maintenance Engineer in the UK.
• Experience with working on PLC’s, ideally being able to find fault using inputs and outputs
• Working in a high care or chemical environment

The Multi Skilled Maintenance Engineer will benefit from:

• Working for a recognized market-leading business.
• Excellent benefits package including pension, life insurance, and gym access.
• Training and development opportunities for engineers
• Good pension

If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.

For further details contact Sam Turner at Pioneer Selection

As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.