Doncaster
£42,000
Double Days (Mornings & Afternoons)

We are a manufacturing company based in Doncaster looking to recruit a Multi-Skilled Maintenance Engineer to support a busy production environment working double day shifts (mornings and afternoons).

Role duties:

• Reactive and planned preventative maintenance (PPM)
• Electrical and mechanical fault finding on manufacturing machinery
• Working with motors, sensors, conveyors, bearings, belts and drives
• Supporting production to minimise downtime

Requirements:

• Multi-skilled maintenance background
• Experience in a manufacturing or industrial environment
• Electrical or mechanical bias considered
• Able to work double day shifts

If you feel this is of interest please send your CV directly to dan at Daniel.Rose @ Cvtechnical.co.uk or call for a confidential discussion on 01455 291035

We are AMS. We are a global total workforce solutions firm; we enable organisations to thrive in an age of constant change by building, re-shaping, and optimising workforces. Our Contingent Workforce Solution (CWS) is one of our service offerings; we act as an extension of Rolls-Royces recruitment team and provide professional interim and temporary resources.

Rolls-Royce is a respected engineering organisation operating in many sectors including energy, aerospace, marine and defence. Rolls-Royce pioneers cutting-edge technologies that deliver clean, safe & competitive solutions to meet our planet’s vital power needs. Due to a number of exciting change and transformational activities across the Rolls-Royce business we are now seeking to add a number of Thermofields Engineers.

TheThermofluids Engineerswill be based in Derby.

Youll be responsible for:

• Define system, sub-system and component requirements for thermofluidic, temperature and thermo-mechanical analysis.
• Develop and evaluate concepts using analytical methods to support system-level design trades and architecture selection.
• Perform modelling, simulation and verification at component and system level across the product lifecycle.
• Plan and conduct validation activities including test specification, model calibration and uncertainty quantification.

To be successful in this role you will need to:

• Hold a Bachelors degree or higher (or regional equivalent) in Engineering or a related discipline.
• Apply logical, analytical and innovative thinking to solve complex engineering problems.
• Demonstrate proactive ownership, high self-motivation, and strong customer focus.
• Communicate effectively and collaborate confidently with peers and technical leaders.
• Ideally have experience in thermal, mechanical, or fluid systems, and be working toward Chartered status with a relevant professional body.

Next steps:

If you are interested in applying to theSystems Design Integration Engineerposition and meet the criteria outlined above, please click the link to apply and we will contact you with an update in due course.

**To work for Rolls-Royce you may need to hold a Security Check (SC). Rolls-Royce will support the application for SC if you dont currently already have this in place and it is required for the role. Due to the nature of work the business conducts and the protection of certain assets, for some roles you must hold a UK nationality.\

Please note that due to recent changes in Off Payroll (IR35) legislation, our client only operates with contractors that operate via a PAYE or Umbrella model. We are unable to accept applications from candidates wishing to operate under their own Limited Company.

AMS, a Recruitment Process Outsourcing Company, may in the delivery of some of its services be deemed to operate as an Employment Agency or an Employment Business.

Bradford

Doubel Days

Salary £45K

Our client, a leading manufacturing company based in Bradford, is looking for a Maintenance Engineer to join their team. This is a fantastic opportunity to work in a fast-paced production environment with a competitive salary of up to £45,000.

Key Responsibilities:

• Perform preventative and reactive maintenance on machinery and equipment.
• Diagnose and repair mechanical and electrical faults.
• Ensure minimal downtime and optimal production efficiency.
• Work as part of a team to maintain a safe and efficient work environment.

Requirements:

• Proven experience as a Maintenance Engineer (mechanical/electrical).
• Strong fault-finding and problem-solving skills.
• Experience in a manufacturing or industrial setting.
• Ability to work continental shifts.

If you feel this is of interest please send your CV directly to dan at Daniel.Rose @ Cvtechnical.co.uk or call for a confidential discussion on 01455 291035

13412

This position is perfect for an FPGA Engineer focused on innovation. You will be ahead of industry trends, collaborating with leading semiconductor companies and top engineers on challenging projects. In this small company, there’s no micromanagementjust a focus on great work. Attend meetings when needed, but you have the freedom to design solutions your way. If you enjoy solving complex problems independently, this role offers flexibility and autonomy.

This FPGA Engineer role is hybrid, after an initial training period fully onsite.

Despite being very well-established and highly successful, they maintain a small business atmosphere with a start-up culture.

Senior FPGA Engineer essential requirements

• At least 5+ years relevant FPGA experience
• Good understanding of the PCIe spec OR very experienced designer of FPGA cores.
• Familiarity with Verilog, System Verilog

Senior FPGA Engineer desirable skills

• High-speed protocols Ethernet, PCIe, USB, NVMe, CXL etc
• C/C++. Linux, Bash, Python, VHDL, tcl
• Jira, Git
• VHDL
• High speed transceivers
• Memory controllers
• PCB Layout

Position: Senior FPGA Engineer  
Location: Hybrid WFH within reach of Portsmouth  
Salary: £60-95k  
Benefits:Bonus, Pension, Healthcare  
Key Skills: FPGA design, Verilog  

Experienced Senior Systems Engineer to be responsible for the delivery of an alternative fuel ICE, as well as taking a multitude of new conventional engine system components from concept to flawless launch, ensuring a robust system/component sign-off meeting all regulatory, quality, cost and timing requirements. The post will suit an individual looking for an opportunity to develop their career within a fast-paced organisation at the cutting edge of engine design and development.

Senior Systems Engineer Role:

Working within a dynamic engineering-focused team, you will be responsible for the end-to-end engineering activities (research, development, delivery, and launch) relating to engine systems.

You’ll need to support in-house quality, manufacturing, and service teams in resolving complex technical issues resulting from warranty claims and/or issues that lead to engineering change as the permanent solution, creating all-in-all robust product of world class quality.

Senior Systems Engineer Responsibilities:

Planning and Organisation:

• Maintaining and delivering the project plan for your system based on cascaded targets and allocated resource.
• Coordinate and liaise with key stakeholders (e.g. programme, purchasing, supplier) for seamless project delivery.
• Support programme gateway reviews with technical evidence and cost status.
• Provide effective and timely escalation/status report through clear communication to management.
• Provide support to other design workstreams throughout the global design team.

Research and Development:

• Keep on track of the state-of-the-art technical development within the System for which you are responsible.
• Understand the effectiveness and importance of relevant benchmarking.
• Create clean sheet concept designs from first principles.
• Plan and execute Proof-of-Concept assessment either through test campaign and/or first principle analysis and simulation.

Design and Release:

• Work in a simultaneous engineering environment to support product development, ensuring design for service and achieving quality by design.
• Elicit requirements for your system based on cascaded performance and cost targets.
• Create system and component specifications and designs based on agreed requirements with key stakeholders.
• Commission relevant analysis tools to support data driven design decisions or undertake and develop in house analysis.
• Develop system and component FMEAs, and DVPs.
• Coordinate and supervise DVP activities (e.g. analytical, simulation, and rig/engine/machine testing).
• Resolve engineering issues using structured problem-solving methodologies (e.g. Global 8D, DMAIC).
• Engage and support suppliers via the APQP process; deliver prototypes and PPAP parts to schedule, and fulfil quality and performance requirements.
• Support achievement of business s quality and warranty targets.
• Support current product through continuous improvement of components and system specification.

Senior Systems Engineer Requirements:

Have a degree in an associated mechanical engineering discipline, with a sound understanding of Mechanical Engineering principles (showing an attention to detail, and being data driven).

Have a sound grasp of the engine product development cycle, and expertise in engine system and component specification, design, development and sign-off (using relevant tools).

5+ years previous experience of full system design for diesel or gasoline engines is essential.

Practical understanding of ICE operating principles (e.g. mechanical/electromechanical design, thermodynamics, and tribology).

Demonstratable experience in use of commercially available 2D drawing and 3D Modelling packages with knowledge of mechanical engineering GD&T and manufacturing processes.

Understanding of the role of emissions performance relating to ICE.

Knowledge and experience in Model-Based-System-Engineering is preferred.

Previous experience of 1D simulation (in AMEsim or similar) is advantageous, but not required.

Experienced supplier interactions and management, with good commercial awareness.

Understand and contribute to the management of the project.

Be able to work well under pressure and to meet deadlines.

Demonstrate an ability to communicate clearly and concisely at all levels.

Show flexibility - the role requires travel to customer and supplier sites.

Be willing to contribute in a dynamic, collaborative, and cross-discipline team setting.

Benefits:

In addition to an excellent salary, career progression and development opportunities, our client offers an excellent company pension scheme, medical insurance and dental care schemes, access to the company s healthy living centre and 33 days annual leave and flexibility around daily start and finish times. You will also have access to the Company s Reward Hub, giving you fantastic savings across a huge range of high street retailers, as well as access to exclusive company perks such as the Cycle to Work Scheme.

Applications:

VISA Sponsorship is NOT available for this role

This vacancy is only available to Candidates with relevant experience as detailed in the job description. Due to volume of applications, we are unable to respond to applicants who do not possess the required skills and experience. Recent Graduates who do not have the required level of industry experience need not apply.

Candidates must be authorised to work in the country where this role is located BEFORE making an application.

Southend-on-Sea

£35,000 to £45,000 + Training + Bonus Scheme + Cafeteria + Gym + Social Atmosphere + Career Progression + Company Benefits

Are you a Test Engineer or similar with a background in Electronics looking to join an award-winning and industry leading specialist in Hi-Fi audio equipment for commercial and individual use across the world, offering great career opportunities and bonus scheme?

Do you want to join a bespoke designer and manufacturer of high-fidelity audio equipment company clients across the globe, producing award-winning turntables, speakers and amplifiers prioritising superior sound quality, investing heavily in their technology and employees?

On offer is the opportunity, for a Test Engineer or similar, with a background in Electronics, to join a team of design specialists with over 50 years of industry experience, offering great benefits such as an Annual Bonus scheme, free hot lunch and great career opportunities.

In this role, as a Test Engineer, you will be responsible for fault-finding and repairing board-level audio electronics to ensure they meet quality and performance standards. The role involves functional testing, PCB rework and component-level diagnostics, working with internal teams to maintain accurate procedures and technical feedback.

This role would suit a Test Engineer with a background in Electronics with experience fault finding analogue PCBs with relevant qualifications or professional background. The ideal candidates would have a radio or power systems background.

The Role:

• Faulting finding and repair of PCBs
• Diagnose and rework PCBs at a component level
• Collaboration with internal teams

The Person:

• Test Engineer
• Electronics Background
• Communication Skills

REF: BBBH23785JHA

Keywords: Test Engineer, Fault Finding, PCB rework, Hi-Fi Audio, Product Development, Analogue Circuits, Southend-on-Sea, Project Co-ordination, Career Progression

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

Bradford
£43,000
Days

We are a manufacturing company in Shipley, Bradford looking for a Multi-Skilled Maintenance Engineer with a mechanical bias to support a busy production site.

Role duties:

• Reactive breakdown maintenance and fault finding
• Planned preventative maintenance (PPM)
• Mechanical work on chains, belts, bearings, sprockets, gearboxes and drives
• Supporting production to minimise downtime
• Ensuring all work is carried out safely and efficiently

Requirements:

• Experience in a manufacturing / industrial environment
• Strong mechanical background (electrical skills an advantage)
• Experience with conveyors and rotating equipment
• Ability to work independently and as part of a team

If you feel this is of interest please send your CV directly to dan at Daniel.Rose @ Cvtechnical.co.uk or call for a confidential discussion on 01455 291035

Job Title: Contractor - Principal Design Engineer (Vehicle and Suspension Engineering)

Location: Leamington Spa, Warwickshire - Hybrid working available

Contract Type: Contractor (IR35 status determination is uncertain at this time and will be assessed in line with current off-payroll working rules once the engagement progresses. We will provide a Status Determination Statement as required.)

Role Overview We are seeking an experienced Principal Design Engineer to join a global mechanical design team on a contract basis. You will lead the design and development of vehicle and suspension systems, from initial concept through to production-ready solutions.

This role involves taking ownership of mechanical systems or complete products, managing a small team of designers, and collaborating closely with other engineering disciplines (e.g., simulation, manufacturing) to deliver solutions that meet component, system, product, and client requirements.

Key Responsibilities

• Lead concept and detailed 3D mechanical design of systems, assemblies, and complex components (e.g., subframes, suspension knuckles, control arms, tie rods, pitman arms).
• Perform detailed design activities, including basic stress calculations, FMEA, 2D detailing, layouts, and tolerance stack analyses as needed.
• Work closely with FEA and simulation teams to validate designs against requirements.
• Collaborate with manufacturing and process engineers to ensure DFMA compliance.
• Manage Bills of Materials (BOMs).
• Produce technical reports, documentation, and other project deliverables.
• Liaise with suppliers and internal teams to ensure timely information flow and resolution of client queries.
• Coach and mentor junior design engineers in best practices.
• Step into lead designer or small-to-medium project team leadership roles as required.
• Stay informed on relevant market trends and sector developments.

Essential Skills and Experience

• Degree (BEng/MEng) in Mechanical Engineering or equivalent, plus substantial relevant experience (or equivalent technical background).
• Proven track record in mechanical design engineering, with a strong focus on vehicle/chassis systems.
• Specialised knowledge in at least one key area: suspension design, subframe design, or suspension/steering components.
• Strong grasp of core mechanical engineering principles, including the ability to interpret and apply FEA/CFD results.
• Good understanding of suspension/steering fundamentals, vehicle dynamics, NVH, and durability considerations.
• Solid knowledge of manufacturing processes and their design implications, with practical DFMA experience.
• High proficiency in producing and checking 2D technical drawings, with advanced GD&T competency.
• Experienced CATIA V5 user (essential).
• Familiarity with PLM systems (Windchill preferred).
• Experience leading small teams.
• Advanced Microsoft Office skills.

Personal Attributes

• Confident, proactive, and adaptable - able to lead in challenging situations to deliver results.
• Strong technical communication and report-writing skills in English.
• Excellent problem-solving and analytical abilities.
• Organised, with the capacity to manage multiple priorities and tight deadlines.
• Willing and able to travel occasionally (UK and overseas) for supplier/customer meetings.

What We Offer

• Hybrid working flexibility (office/home mix, to be discussed).
• Opportunity to work on innovative, sustainable engineering projects in a supportive environment.
• Competitive contractor day rate (negotiable based on experience).

This is a contract position, and applications are welcome from experienced contractors. If shortlisted, we will discuss IR35 considerations further and issue any required status determination.

To apply, please submit your CV and a brief cover note outlining your relevant vehicle/suspension design experience.

Due to continued growth we have a new opportunity available for a Maintenance Engineer to join our client one of Europe’s leading privately-owned food processors at their Penston site in Glasgow.

Job Title: Maintenance Engineer
Location: Glasgow
Salary: £43,255 - standard working week - 40 hours, £45,417 - 4on/4off - 42 hours, £48,445 - 4on/4off (inc nights) - 42 hours
Shifts - 4 ON 4 OFF - Days or Nights - 05.30 17.30

The role:
As the Maintenance Engineer you will possess a strong technical knowledge and be seen as the shift expert in at least one area of the factory or type of machinery. Working as a member of your shift team you will be responsible for maintaining the equipment OEE and minimising downtime. You will be accountable to the Engineering Manager/Assistant Managers but will report into and receive direction from your Engineering Supervisor regarding the day to day activities you will undertake.

Duties & Responsibilities:

• It would be advantageous to be able to demonstrate relevant engineering competencies and have experience with Packing Machinery and in particular; Proseal, Mondini, Multivac and associated equipment.
• Record and log maintenance requests and fault repairs, attend breakdowns and repair in a timely and controlled manner.
• Progress reporting to Engineering Management / Supervisor.
• Must be proactive to complete scheduled work plans, start-up checks etc. in a timely manner.
• Carryout special projects as required by the Engineering Management team.
• Comply with health and safety and food safety legislation.
• Liaise with the production team to ensure we supply our customer.

The ideal candidate will be educated to a minimum of ONC/NVQ in an Engineering related discipline and 18th edition qualification would be advantageous. You will also ideally have completed an apprenticeship or an equivalent formal training programme in installation and maintenance that includes relevant practical experience.

You will be an excellent communicator with the ability to take direction and challenge in a professional manner along with proven experience of planned maintenance systems, breakdown maintenance and installations and knowledge of hydraulic and pneumatic systems.

Position: Hardware Test Engineer
Location: Stevenage
Salary: £30,000-£35,000 (dependent on experience)

Hardware Test Engineer required for our client based in Stevenage, they are a rapidly growing UK-based health tech start-up that’s building wearable technology with the power to support people living with neurological conditions.

They are looking for a Hardware Test Engineer to own the day-to-day quality checks, test processes, and failure reduction work for their devices. You’ll help ensure every device leaving our facility meets defined standards, and you’ll drive continuous improvement by diagnosing failures, feeding insights back into engineering/manufacturing, and tightening our QA controls. This is a hands-on role that suits someone who likes practical electronics, structured testing, and improving processes through data.

Hardware Test Engineer Overview

• Perform incoming inspection (IQC) for delivered components and assemblies (spot checks, sampling, visual inspection, basic electrical checks).
• Run end-of-line (EOL) functional tests on finished devices (haptics, charging, battery, buttons/sensors if present, firmware/app pairing where applicable).
• Maintain pass/fail criteria and ensure consistent test execution across batches.
• Record results accurately and flag non-conformances immediately.
• Create, improve, and maintain test SOPs, checklists, and work instructions (clear, repeatable, version-controlled).
• Triage returns: reproduce faults, isolate root causes, and classify failures (e.g., battery, charging, haptic motor, PCB fault, enclosure/strap, firmware).
• Produce concise failure analysis reports with photos, measurements, and recommended corrective actions.

Hardware Test Engineer Requirements

• Experience in hardware testing, electronics technician work, QA, or production test (consumer electronics/wearables a plus).
• Comfortable using tools such as: multimeter, power supply, basic measurement instruments; confidence with connectors, batteries, enclosures.
• Ability to follow and improve structured test procedures and documentation.
• Strong attention to detail; calm, methodical troubleshooting.
• Basic data handling: Excel/Google Sheets; ability to spot trends and keep clean logs.

Hardware Test Engineer Salary & Benefits

• Salary - £30,000-£35,000 (dependent on experience)
• Monday to Friday (09:00 to 17:00)
• On-site position
• Holiday package
• Pension scheme

Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.

We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Due to an increase in upcoming projects, there is now a need for aCommercial Catering Engineerto join a highly successful and forward-thinking organisation.

We are looking for aCommercial Catering Engineerwho wants to work in a diverse rolewhere no two days are the same.

TheCommercial Catering Engineer,will be responsible for:

• Carry out planned, reactive, and emergency maintenance on gas appliances and associated systems
• Leading a small team of engineers
• Support plumbing and basic electrical maintenance tasks
• Diagnose faults and complete repairs within contractual timescales
• Complete all documentation and certification accurately and on time
• Monitor subcontractors and issue permits for small works as required

To be successful for this Commercial Catering Engineer role you must have:

• Commercial gas qualifications including COMCAT1, COMCAT2, COMCAT3 and CCCN1 (desirable)
• Minimum 5 years’ experiencein relevant role
• Extensive knowledge of commercial gas systems
• Full UK driving licence

If you feel you have the necessary skills set and experience to perform thisCommercial Catering Engineer role, and you are interested in an opportunity offering unparalleled career development, please apple now.

We currently have a fantastic opportunity for a Plumbing & Heating Engineer to join our clients team based in the Stafford area!

Looking for an easy, stress free, steady role? This could be the role for you, especially if your close to retirement and your looking to wind down.

Our client is a leading estate management company looking to expand it’s team with the appointment of a plumbing & heating engineer to assist with the maintenance and works required on a wide range of proprieties in it’s portfolio.

We are pleased to be able to offer this role on a full time, permanent basis.

If successful, you will be employed directly by our client and not through an agency.

What you’ll be doing:

You’ll be responsible for the installation, service, maintenance and repair of a range of plumbing and heating systems across our clients range of properties.

Majority of the systems are oil / gas fired. Gas qualifications & OFTEC qualifications are a must.

You may also be required to respond to emergency call outs as and when required, it’s highly unlikely that a call out would be required, however this is something that the role would be required to cover in the off chance.

On top of this, you’ll be required to liaise with external contractors and other estate staff to ensure works are completed correctly and to the best standard.

Our client stresses the fact that this is a stress free role, work takes as long as it takes as long as the workmanship is good quality.

Majority of the work is booked in advance in the diary.

No micromanagement, no strict timescales and no heavy workloads.

Pay:

£38,000 - £42,000 per year + a host of benefits.

You’re annual salary will be reviewed upon completion of your probation period, with the look to increase.

Hours:

Monday - Friday.

Hours can be made flexible for the right candidate.

Requirements:

• At least 3 years plumbing experience
• NVQ L2 in Plumbing or equivalent
• Gas qualifications
• Oftec qualifications
• Excellent standard of work
• A proactive approach
• Excellent communication skills

Benefits:

• 31 days annual leave (including bank holidays)
• Company Pension
• Sick Pay - full pay if you are off sick
• Company van
• Tools
• Upskill courses paid for by the company to enhance your skill set
• Stable, long term employment

What to do next:

Apply below and we’ll be in touch.

Initial 12-month contract
up to £75ph, UMB, inside IR35
Stevenage (onsite)

Please note this role requires SC level Security Clearance.

The successful candidate will be the designer for specific RF electronics designs. Interfaces to various stakeholders, such as the Datalink core team, Design Authority and other functional entities will need to be managed effectively to ensure the designs are delivered in a timely manner and will integrate to the other parts of the system

Responsibilities:
The role is substantially technical and hand on testing and proving is essential. Collaborative working with other functions of MBDA, in particular Software & Firmware Engineering, Mechanical Engineering, Production and Future Systems.

Skillset/experience required:
Individuals will be able to demonstrate a significant number of the following attributes:
* Proven relevant RF electronics design experience (likely to be the design of 3 or 4 complex RF electronic items using the latest technologies), preferably for harsh environments (EMC, Vibration, thermal).
* Can guide the design implementation of RF Electronics Receiver / Transmit amplifier chains, filters and frequency synthesisers over the 30Mhz to 30GHz range. Software Defined Radios of good advantage.
* Knowledge and proven best practice design of power supplies and digital interfaces for use in a RF product.
* Proven ability to manage the development and delivery of RF electronic equipment including associated technologies through all stages of the development process
* Ideally degree qualified
* Planning and organisation skills with a record of delivering to time and cost
* Strong negotiating and influencing skills;
* Self-starter with drive, energy and enthusiasm and a clear focus on delivery and results.

HW/Device Testing Engineer
Certain Advantage is hiring for a Hardware Engineer based in the Warwickshire area.
This role is on a contract basis and is site-based.
The Company
Were working with a Manufacturing business that blends British craftsmanship with cutting-edge innovation to create luxury vehicles that redefine performance and style.
Does this sound like your next career move?
If youre ambitious to grow, this may be your next role.
Would you like to be responsible for testing of automotive infotainment systems, with a strong focus on active NVH (Noise, Vibration, and Harshness) technologies at both system and subsystem levels?

The Role:
This role is for a Hardware/Device Testing Enginersomeone ambitious and ready to make an impact. Youll be results-oriented and driven to succeed.
Youll be leading a small, experienced, and collaborative team, and be responsible for:

• Plan and execute test programmes for infotainment systems, particularly those involving active NVH technologies.
• Collaborate with cross-functional teams, including hardware, software, and NVH specialists, to ensure integrated system validation.
• Set up and maintain test rigs and environments for infotainment and audio system validation.

The Individual
Were looking for people who can show:

• Background in testing automotive infotainment systems, ideally with active NVH technologies.
• Debugging and analysis using tools such as:
  • Wireshark
  • Vector tools (e.g., CANoe, CANalyzer)
  • Putty
  • Media converters
  • JTAG flashing
• Automotive communication protocols:
  • CAN
  • Ethernet (Some IP)
  • A2B (Automotive Audio Bus)
• Audio systems and rig setup for validation.

The Benefits:

• Competitive hourly rate of around £34 per hour
• Training and Development

Does this sound like your next career move? Apply today.

Working with Certain Advantage
We go the extra mile to find the best people for the job. If youre hunting for a role where you can make an impact and grow your career, well work with you to find it.
We work with businesses across the UK to find the best people in Finance, Marketing, IT and Engineering. If this job isnt for you, head to certainadvantage.co.uk and register for job alerts and career guidance tips.

£35,000 - £45,000 + Training + Progression + 39 Days Annual Leave + Private Medical + Enhanced Pension + Relocation Package
Wick

Are you a Junior Electronic Design Engineer or similar looking for your next technical challenge within one of the largest design companies in the UK, who offer vast amounts of progression both technically and managerially?

On offer is the chance to join an international Engineering business operating in the Marine, Oil/Gas, Renewable Energy and Aquaculture industries. They are growing rapidly, and are known for developing their staff, promoting from within.

In this role, you will be responsible for producing high-spec designs of sub-sea marine devices, analysing current designs, problem solving and assisting in the implementation of progressive improvements.

This role would suit a Junior Electronic Design Engineer or similar looking to progress technically within an industry leading design company

The Role

• Producing fit for purpose designs to high specification and relevant standards.
• Test and Problem solve new and existing hardware
• Provide Technical Support

The Person

• Junior Electronic Designor similar
• Degree in Electronic / Electrical Engineering

Reference Number: BBBH23871

Electronics, Electronic, Design, Electronics Design, PCB, PCB Layout, Design Engineer, Aberdeen, Marine, Maritime, Energy, Oil, Gas, Renewables, Wick

If you are interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy and Disclaimers which can be found at our website.

ORONAs activities are focused on the design, manufacture, installation, maintenance, and modernisation of lifts, escalators, moving ramps and walkways. Operating in100 countries, we have330,000 liftsworldwide using our technology. With2 manufacturing plantsOrona isNumber 1 in Europein terms of complete lift production capacity.

Summary

We are looking for an Senior Design Engineer within the lift industry experience.Ideally based anywhere in the UK (except Northern Ireland), however it will require regular travel to meet with the team based in Sunbury. A company vehicle may be provided.

You will be responsible for, all design aspects of the lift installation including drawing production, customer liaison, installation teams liaison, design standards and personally delivers final Builders Working drawings. Provides responsive internal and on site design support and training.

Other duties include:

• Produces Builders Works, Engineering, Lift finishes drawings and sketches in accordance with company standards, best practise, legislation, H&S guidelines and the Lifts Regulations.
• Understands, interprets and integrates Architectural and technical building drawings and information, and incorporates within a co-ordinated working design.
• Produces designs with an awareness of timescales and deadlines in respect of customer requirements. Records design process on company software systems
• Assists in producing Operating and Maintenance Manuals, ‘as fitted’ information and regularly checks project completion schedules to ensure the O&M manuals are issued to customers in a timely manner in accordance with company practises.
• Has responsibility for ensuring the customer fully understands the builders work drawings and prepares the site to agreed drawings and attendances. Checks the site for compliance and advises any anomalies/proposals in writing to the customer. Completes site surveys to ensure site is prepared as per agreed drawings and schedules and advises customer on areas of non-compliance.
• Attends design meetings where required to liaise with the customer, Architects, project designers.
• Responsible for attaining customer approval of builders work drawings and lift finishes.

Benefits

• Competitive salary
• 25 days holiday (rising to 30 days with service) + 8 days Bank Hols
• Pension (Company contributions rising with service)
• Life Assurance
• Medical Cash Back Plan
• Enhanced Family Friendly Leave
• GP24/7
• Employee Assistance Program
• Eye care vouchers
• Long Service Awards
• Recruitment referral fee
• Training and Development opportunities

Requirements

• An accredited university degree
• Must have previous experience in the Lift Industry
• CAD - Should be conversant in Auto-Cad or similar design software.
• Technical Drawings- Fully conversant with engineering drawings and able to explain them to others.
• Problem Solving able to identify problems, break them down into smaller elements, pin point possible solutions, prioritise these different elements and construct an action plan for tackling the problem.
• Innovative shows good judgement about new ideas that will work and able to put them into practice.
• Stand Alone has the self confidence to be able to work with minimum supervision and be trusted to deliver work that is timely and accurate, right 1st time.
• Communication- good communicator both orally and in writing, providing clear and relevant information to others in a way that they can understand exactly the true message that is being sent. Must also be able to select the right medium to use.

Digital IC Design Lead - Southampton (Hybrid) - £90k + Benefits My client is a high growth semiconductor business with a strong focus on innovation across display, video, AI data processing, and wireless connectivity. They operate in a modern, engineering led environment and are continuing to expand their IC Development capability. They are now seeking an experiencedIC Digital Leadto join their growing team. This is a senior technical leadership role, combining hands on digital IC expertise with people and project leadership. Location:Southampton, Hampshire (Hybrid) Visa Sponsorship:Available Essential requirements: BEng or MEng in Engineering, Electronics, or a related discipline 5+ years experience in digital or mixed signal design 1+ years experience in a people management or technical leadership role Hands-on experience in digital IC design using Verilog, SystemVerilog, and/or VHDL Desirable experience: Mixed signal design exposure Familiarity with the full ASIC front end and back end flow Python scripting Experience using tools such as JIRA and Confluence

Hertfordshire

(£34,000 - £48,000) + Overtime + Company Van + Fuel Card + Diagnostic Laptop + Training + Job Satisfaction + Close Knit Team + Family Feel + Stability + Pay Reviews + Low Staff Turnover + Flexibility + Appreciation + Pension + Holidays + Monday - Friday + Package

Secure your career now as a Plant Engineer working with a family-run business in a stable and growing sector. Join a close-knit, collaborative team where everyone is treated equally and valued for their contribution. Enjoy a varied role split between the workshop and field service, with excellent earning potential, optional overtime, and all the tools you need to succeed. Apply today for a long-term, secure role with a genuinely supportive company culture.

This company specialises in the servicing, maintenance, repair, and welding of plant and machinery across the UK. Due to continued growth, they are now looking for a Plant Engineer to join their team in Wellingarden. Step into a stable role offering competitive pay, flexibility, and long-term progression while working alongside experienced engineers in a friendly environment.

Your Role As A Plant Engineer Will Include:

• Carrying out day-to-day servicing, maintenance, and repairs on a wide range of plant and machinery
• Fault-finding and breakdown repairs across mechanical, electrical, and hydraulic systems
• Working on excavators, telehandlers, dumpers, crushers, screeners, and general plant equipment
• Completing both scheduled maintenance and reactive repair work
• Attending site breakdowns when required using a fully equipped company van
• Welding and fabrication work where required (advantageous but not essential)
• Accurately completing job reports and communicating with the workshop team

As A Successful Plant Engineer You Will Have:

• 4+ years’ experience working on plant, construction machinery, or diesel equipment
• Strong mechanical background with electrical and hydraulic knowledge
• Confidence working independently in the field and as part of a workshop team
• A full UK driving licence
• A strong willingness to learn, develop, and contribute to a close-knit team

Please get in contact with Maia on 07537154330 for immediate consideration.

Keywords: Plant Engineer, Plant Fitter, Service Engineer, Field Service Engineer, Mechanical Engineer, Diesel Engineer, Heavy Plant Engineer, Wellingarden, Workshop Engineer,Mobile Plant Engineer, Plant Maintenance Engineer, Plant Service Engineer, Agricultural Engineer, Construction Plant Engineer, Heavy Equipment Engineer, Hydraulic Engineer, Mechanical Fitter, Mobile Service Engineer, Workshop Fitter, Diesel Mechanic, HGV Engineer, Forklift Engineer, Telehandler Engineer, Excavator Engineer, Plant Technician, Equipment Engineer, Breakdown Engineer, Site Engineer, Field Engineer
Hertford, Watford, St Albans, Hemel Hempstead, Stevenage, Hatfield, Welwyn Garden City, Letchworth, Hitchin, Harpenden, Borehamwood, Bushey, Rickmansworth, Ware, Cheshunt

This vacancy is being advertised by Future Engineering Recruitment Ltd.

The services of Future Engineering Recruitment Ltd are that of an Employment Agency.

Future Engineering Recruitment Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit or are pending an application to obtain this right or permit should not apply as your details will not be processed.

We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted.

Info about the company A global automotive technology business specialising in advanced electric drive systems for passenger cars, light commercial vehicles and future mobility applications. The company operates at the forefront of innovation, developing high-performance electromechanical products within a regulated, quality-driven environment. Info about what the Product Validation Engineer role entails This is a hands-on role supporting the development, build and validation of prototype products within a cutting-edge R&D environment. You will be responsible for building prototype units, assembling mechanical and electronic components, setting up and running validation tests, and producing clear test documentation and reports. In addition, the role includes responsibility for test equipment calibration and maintenance, ensuring all equipment remains compliant, traceable and fit for purpose. This position is ideal for an electromechanical technician who enjoys practical build, testing, and working closely with engineering and development teams. Key Responsibilities Mechanically and electrically assemble prototype products to the highest quality standards. Build and test electronic modules, including wiring and soldering activities. Generate clear and accurate build documentation. Set up and carry out product validation and verification tests in line with defined procedures. Design and build basic test jigs and fixtures to support validation activity. Produce test documentation, reports and records to support development and compliance. Support the development of test strategies for current and future products. Manage calibration and maintenance of test equipment across UK facilities. Maintain and update test equipment inventory and calibration records. Coordinate with internal teams and external suppliers to ensure equipment remains calibrated and compliant. Ensure equipment management processes meet ISO 17025 and ISO 9001 requirements. Monitor equipment condition, calibration status and associated budgets. Promote continuous improvement in test equipment and calibration processes. Essential Requirements of the Product Validation Engineer HNC / Level 4 (or higher) qualification in an electrical, electronic, mechanical or electromechanical discipline. Proven experience working as an electromechanical technician within an R&D, test or product development environment. Hands-on experience using laboratory test equipment such as oscilloscopes, meters, current clamps and data loggers. Strong soldering and wiring skills. Experience testing low-voltage products. Ability to read and interpret electrical schematics and mechanical drawings. Experience following test procedures and producing structured test reports. Understanding of test equipment calibration and maintenance processes. Desirable Requirements of the Product Validation Engineer IPC 610 certification. Knowledge of ISO 17025 requirements. Understanding of calibration factors such as accuracy, resolution, range and measurement uncertainty. Experience working in high-performance or motorsport-style engineering environments. Benefits Competitive salary package On-site role within a modern R&D facility Generous pension scheme 25 days holiday plus bank holidays Enhanced family leave policies Cycle to work scheme Employee assistance programme Learning and development opportunities Free on-site parking If you feel you are suitable and interested in this role, APPLY NOW with an up to date CV. We also pay referral fees if you can suggest another suitable person that isnt already known to us. April Quest Ltd acts as both an Employment Business and Employment Agency and complies with the Conduct of Employment Agencies and Employment Businesses Regulations Act 2003. We take your privacy seriously; our Privacy Policy can be viewed on our website.

Glasgow

£35,000 - £40,000 + Early Friday Finish + Annual Bonus x2 + Career Progression + In-House/External Training + 25 Days Holiday + Bank Holidays (Floating)

Are you a Mechanical or Electrical Maintenance Engineer, or both, looking for a stable, long-term role within a close-knit and well-established manufacturing business, that offers great work life balance through an early finish Friday and a generous holiday package, achievable progression opportunities into managerial roles, both in-house and external training allowing continual development, and a bonus paid twice a year?

Do you want the opportunity to join a leading manufacturer supplying into the Semiconductor industry, where you’ll be supported, trained, and valued as part of a family-feel business with over 35 years of industry experience?

On offer is the chance to join a reputable, and well-established company who specialise in the manufacture and supply of quartz and thermocouple products for a variety of industries including but not limited to semiconductors, solar, and fiber optics.

In this role you will be responsible for the Maintenance and repair of a variety of Machinery, including but not limited too industrial ovens and furnaces, Lathes, and CNC grinders and millers. This will be a mixture of planned and reactive Maintenance.

This role would suit a Mechanical or Electrical Maintenance Engineer, or similar, looking for a stable role with great benefits, including but not limited too an annual bonus paid twice a year, scalable career progression into managerial roles, internal and external training enabling you to technically progress, and a generous holiday package.

The Role

• Maintenance of a variety of machinery, including ovens, furnaces, and CNC Machinery
• Planned and reactive Maintenance
• Completion of PPM schedules

The Person

• Maintenance Engineer or similar (Mechanical or Electrical)
• Commutable distance to East Kilbride

BBBH23895

Keywords: Engineering, Engineer, Maintenance, Mechanical, Electrical, Mechanical Engineer, Electrical Engineer, Mechanical Maintenance, Electrical Maintenance, PPM, Benefits, Manufacturing, East Kilbride, Glasgow

If you’re interested in this role, click ‘apply now’ to forward an up-to-date copy of your CV.

We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered remuneration will be dependent on the extent of your experience, qualifications, and skill set.

Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C’s, Privacy Policy, and Disclaimers which can be found on our website.

Leeds Monday to Friday 6:00am 2:30pm, 2:00pm to 10:30pm weekly rotation £47,000 basic plus overtime OTE £49,000 30 days holiday, 3x life assurance Multi Skilled Maintenance Engineer The Role You will work in a food production environment which has a blend of automation as well as more traditional production machinery. The engineering team has 11 members and your role will involve the following Planned maintenance and reactive repairs across a wide range of food production equipment Working on projects. e.g. process improvement Working with Electrical and Mechanical equipment throughout the business Fault finding, inspection and repairs to our machinery when necessary Multi Skilled Maintenance Engineer The Candidate You will be an experienced multi skilled engineer looking for your next role. You will also have the following skills, experiences and attributes Must be a genuinely multiskilled engineer Ideally you will have an electrical bias but candidates with Mechanical bias will also be considered Must have a minimum of 5 years experience of working as a multiskilled maintenance engineer Experience of working with safety circuits and fault finding is essential Experience of working in the food industry would be highly beneficial but is not essential The Company Our client is a highly successful food production business with plans to increase turnover by nearly 50% in the next 3 years. This is your chance to join a growing and well established business. INDAB