£52,314

Wolverhampton

2days/2nights four off

The Company:

My client have been successfully manufacturing for years. Boasting one of the best reputations for hiring maintenance engineers and keeping hold of them. They are constantly innovating and bringing new ideas to the market, this has enabled them to grow from strength to strength and are currently expanding. They are looking for two electrically biased maintenance engineers, they will provide an unbeatable training including PLC training and on-going support to take you the next level of your electrical career.

Some of the machinery you will be working on:

PLCs (Siemens S7)
Drives (Siemens)
Motors (AC/DC)
Sensors (Proximity, Photo cell, & Fibre Optic) o Induction Heating Unitso Overhead Gantry Cranes (Morris, Granada)
Industrial Melting & Holding Furnaces (Gas & Electric) Schumag M/Cs (Drawing & Spinner Blocks)
Plastic Extrusion Machines
Conveyors/Roller Beds
extrusion presses
casting plant
draw benches
Brand newrefining site
spinning machines

Experience required:

• Qualified to level 3 (NVQ/C&G) in an electrical discipline
• at least 3 years experience maintaining/repairing special purpose machinery as an electrically biased maintenance engineer
• Good electrical competence wire and fault find on 3-phase motors, knowledge of contactors, sensors relays etc
• PLC knowledge is desirable
• Any maintenance engineer from manufacturing or ex-forces welcome to apply FMCG, Food, plastic, packaging, Pharmaceutical, foundry, brick, distribution, automotive, metals, RAF, Navy, army, military, etc.

INDSW

Electronics Design Engineer | Full Time | Redditch | £24,626 £46,841 per annum

Our client is a specialist in the design and development of innovative automotive lighting systems. As part of their ongoing growth and investment in future technologies, they are expanding their technical team and are seeking an experiencedElectronics Design Engineerto join their collaborative, fast-paced environment.

This is a hands-on role where creativity, technical ownership, and delivery excellence are highly valued. You will work on cutting-edge LED lighting systems from concept through prototype, validation, and production, supporting global OEM and Tier 1 customers.

Whats in it for you?

• Competitive salary: £24,626 £46,841 per annum, based on experience

• Full-time, permanent role with a 37.5-hour working week:

• MondayThursday: 08:30 17:00

• Friday: 08:30 14:00

23 days holiday (rising to 28 with service) plus 8 statutory bank holidaysCompany pension schemeOn-site parkingOpportunity to work on cutting-edge automotive LED lighting systemsCollaborative and innovative engineering team with global exposure

Are you the right person for the job?

You may be a strong fit if you:

• Have a degree in Electronics or Software Engineering
• Experience in automotive or high-reliability electronics product development
• Experience in embedded software development
• Are skilled in PCB design (schematic capture and layout) using Altium Designer
• Understand analog, digital, and mixed-signal circuit design
• Have hands-on experience with oscilloscope, power supply, logic analyser, and SMD soldering (IPC J-STD-001)
• Have embedded firmware development experience in C (Microchip PIC, MPLAB X IDE, PICKIT4, Microchip Studio)
• Are confident in automotive validation processes, design for manufacture, BOM management, and issue tracking
• Are fluent in spoken and written English and hold a full UK driving licence

Preferred candidates may also have:

• Automotive lighting design experience
• Knowledge of automotive communication protocols (CAN, LIN, FlexRay)
• Experience with Python, C++, Git, Subversion
• Familiarity with MISRA standards and AUTOSAR principles
• Experience with thermal simulation tools (e.g., Fusion 360) and PCB thermal management
• Knowledge of homologation, ECE/SAE lighting regulations, type approval, and EMC testing

What will your role look like?

Electronics Design & Development

• Analyse customer technical requirements and liaise with client engineering teams
• Create and maintain electronic designs including schematic capture, PCB layout, and BOM definition
• Design analog and digital circuits and integrate systems within vehicle architecture
• Support prototype builds, hands-on debugging, and component/system-level testing
• Develop embedded firmware for microcontroller applications

Validation & Compliance

• Contribute to DVP&R, DFMEA, and thermal simulation of PCBs and assemblies
• Support ISO 9001, IATF 16949, and APQP/PPAP-related documentation
• Take ownership of assigned workstreams with clear project documentation

Collaboration & Customer Liaison

• Work closely with CAD, optical, thermal, and software engineers
• Attend customer and supplier meetings in the UK and abroad as required

Continuous Improvement & Innovation

• Apply creative, cost-effective solutions to technical challenges
• Contribute to process improvements and knowledge sharing within the team

Personal Attributes

• Technically curious and passionate about electronics innovation
• Proactive, self-motivated, and results-oriented
• Strong organisational skills and attention to detail
• Able to work independently and collaboratively within multidisciplinary teams
• Confident communicator, capable of presenting ideas clearly
• Open to continuous professional development
• Willing to travel as required for project or customer support

Whats next?

Its easy! ClickAPPLYnow to submit your CV and cover letter. We cant wait to hear from you!

This Maintenance Engineer vacancy is working with a market-leading manufacturing group at a world class facility based near the area of Aldridge. This role offers fantastic industry leading company benefits such as extensive accredited OEM training and personal development opportunities, with a development route through to further career opportunities, and pension match of up to 10%, premium overtime is available. What’s in it for you as Maintenance Engineer: Salary £54000+ plus bonus, plus premium overtime, OTE well over £60K+
In addition, you have a matched pension of up to 10%, share options, overtime at a premium, as well as an extensive benefits program
Hours of work - 4 on, 4 off shift pattern - Days and Nights, 6am to 6pm, 6pm to 6am, OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanentlyExperience and Qualifications Required for Maintenance Engineer: Apprenticeship in Electrical or Mechanical Maintenance - City & Guilds, ONC, BTEC Level 3, NVQ Level 3
Previous experience as a Maintenance Engineer, Maintenance Technician, Engineering Technician, Engineer etc
Previous experience of undertaking reactive maintenance and following PPM schedules within a manufacturing environmentThe company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities. Please apply now

This is a technical, hands-on role focused on ensuring maximum machine availability. You will be responsible for the front-linemaintenance of automated production equipment, including CNC machines, assembly lines, and robotics. Working as part of a dedicated night team, you will tackle reactive breakdowns and perform essential preventative tasks to ensure the facility is ready for peak daytime output.

Key Responsibilities

• Reactive Maintenance:Respond quickly to equipment breakdowns, performing electrical and mechanical fault-finding to minimize production downtime.
• Technical Repair:Repair and maintain CNC machinery and automated assembly equipment (including sensors, motors, and drive systems).
• Robotics & Automation:Support the operation and basic troubleshooting of industrial robotics (KUKA/ABB) and PLC-controlled systems.
• Preventative Maintenance (PPM):Complete scheduled service tasks and inspections during production windows, ensuring all work is logged accurately in the CMMS (SAP).
• Health & Safety:Maintain a safe working environment by adhering strictly to LOTO (Lock Out Tag Out) procedures and environmental standards.
• Continuous Improvement:Support 5S and TPM (Total Productive Maintenance) initiatives to improve workplace organization and machine reliability.

Your Profile

• Qualified:You must have a completed Apprenticeship in an Electrical, Mechanical, or Mechatronics discipline (HNC is a plus).
• Technical Skill:A strong Electrical Bias is preferred, with the ability to read schematics and diagnose faults in complex control systems.
• Experience:Previous experience in a high-pressure manufacturing environment (Automotive or similar) is essential.
• Shift Motivation:You are a specialist who is comfortable and productive working a permanent night shift pattern.
• Team Player:You have a collaborative mindset and are happy to share knowledge and support colleagues to hit departmental goals.

Benefits

• Competitive base salary plus a significant Night Shift Allowance.
• Opportunity to work with the latest automotive manufacturing technology.
• Stable, long-term career in a business-critical production facility.

Be part of an innovative engineering environment and enjoy premium overtime, a market leading double figure pension, and a modern, fully invested engineering site built for high performance, located near Cannock. With accredited cross skilling, continuous upskilling, and clear career progression pathways, this is a role that offers long term stability, standout benefits, and exceptional earning potential. What’s on offer as a Multiskilled Maintenance Engineer Basic Salary: £54,000 + bonus + premium overtime (x1.5, x2), OTE in excess of £65k per annum
Training & Development: Commitment to a focused training and development programme, including electrical cross-skilling for those who want it, leadership training and opportunities, specialist hydraulics training, continuous improvement training, etc. If it helps you progress as an engineer, they will support it where possible
Pension up to 20%
Private healthcare scheme
Prime site location near Cannock with excellent transport links
4 on 4 off working pattern - days/nights
Role & Responsibilities as a Multiskilled Maintenance Engineer Deliver plant-wide proactive and reactive mechanical maintenance to ensure optimum factory performance
Execute PPM schedules and respond effectively to breakdowns as part of the maintenance team
Fault-find and repair key mechanical systems including hydraulics, pneumatics, conveyors, and gearboxes, Motors, Inverters, PLCs etc.
Participate in continuous improvement and reliability initiatives to support world-class manufacturing standards
What do you require to apply as a Multiskilled Maintenance Engineer City & Guilds Level 3 / BTEC Level 3 (or higher) with NVQ Level 3 in engineering
Apprenticeship trained in Engineering, Mechatronics, Electrical or related discipline such as HNC/HND with an NVQ Level 3
Strong background in planned and reactive mechanical maintenance within manufacturingTo apply for the Multiskilled Engineering position, please click "Apply Now

This Maintenance Engineer vacancy is working with a market-leading manufacturing group at a world class facility based near the area of Aldridge. This role offers fantastic industry leading company benefits such as extensive accredited OEM training and personal development opportunities, with a development route through to further career opportunities, and pension match of up to 10%, premium overtime is available. What’s in it for you as Maintenance Engineer: Salary circa £54,000+ plus bonus, plus premium overtime, OTE £60K+
In addition, you have a matched pension of up to 10%, share options, overtime at a premium, as well as an extensive benefits program
Hours of work - Days and Nights, 6am to 6pm, 6pm to 6am, 4 on, 4 off shift pattern
OEM Training and career development, including health and safety training, management training (ILM) & IOSH, cross-skilling and upskilling
The ability to work within a skilled team of engineers permanently
Experience and Qualifications Required for Maintenance Engineer: Apprenticeship in Electrical or Mechanical Maintenance - City & Guilds, ONC, BTEC Level 3, NVQ Level 3
Previous experience as a Maintenance Engineer, Maintenance Technician, Engineering Technician, Engineer etc
Previous experience of undertaking reactive maintenance and following PPM schedules within a manufacturing environment
The company is a market leader, and international manufacturer, with an impressive background of investing in and developing employees at all levels of their business, providing extensive training and career progression opportunities. Please apply now

The role of a Service Engineer UK is extremely varied, on a daily basis you will be responding to a variety of service call outs, completing fault finding & diagnosis on site, regular servicing of automatic pedestrian doors and participating in new system installs & updates. Respond to calls for service as directed by the Planning team Fault finding and remedy faults within our customer service level agreements Maintenance, service and repair of auto pedestrian doors Control of spare parts Carry out PPM (planned preventative maintenance) Participate in new system installations and upgrades Carry out company documentation efficiently and on time where required Promote the cross sale of Company products where possible Being flexible and travel sometimes at short notice to response to urgent requests or extend hours to fix problems as they occur.
This is a field based position with strong prospects for career progression and personal development technically.
If you have Electrical experience and have a mechanical mindset, this role will be perfect for you.
Competitive salary structure ? Call out rota: £200 per week, 1 in 5 weeks ? Overtime readily available and paid at premium rates ? 25 days annual leave plus all statutory bank holidays ? Fully stocked van and toolkit ? A range of employee benefits including: Company pension scheme 4% employer contribution -------- Life assurance scheme 4x annual salaryEmployee proactive health care Enhanced family leave Mental health support Cycle scheme
Great culture and a positive culture, providing an excellent working environment
Driving Licence Essential

Orion is partnered with one of the UKs leading specialists in the design and manufacture of bespoke Test & Assembly systems in various industries, with expertise in Aerospace.

They are seeking an experienced Senior Systems Engineer with strong expertise in hydraulic test rigs and integration to join their dynamic engineering team. If you enjoy owning complex systems from concept to commissioning, tackling real-world engineering challenges, and working across disciplines, this is the role for you.

As a key member of the team, you will oversee the full lifecycle of hydraulic test rigs and control systems from requirements gathering and concept design to build, testing, and commissioning.

Responsibilities of the Senior Systems Engineer:

• Develop system architectures for hydraulic test rigs and automation systems.
• Define system requirements, specifications, and acceptance criteria.
• Integrate hydraulic, electrical, and control systems into cohesive solutions.
• Collaborate closely with electrical, mechanical, and software engineers.
• Support the design of hydraulic circuits, instrumentation, and control strategies.
• Produce system documentation, including functional specifications and test procedures.
• Support build, test, and commissioning activities, both in the factory and on-site.

Requirements of the Senior Systems Engineer:

• Extensive experience in systems engineering or a similar role.
• Strong experience with hydraulic systems and test rigs.
• Proven ability to integrate multi-disciplinary systems.
• Skilled in producing system-level documentation and specifications.
• Knowledge of instrumentation, sensors, and data acquisition systems.
• Familiarity with relevant engineering and safety standards.
• Experience with high-pressure or safety-critical hydraulic systems.

Benefits for the Senior Systems Engineer:

• Genuine opportunities for career progression as the business expands.
• Hybrid Working.
• Flexible working hours to support work-life balance.
• Competitive salary based on experience
• Health and wellness benefits, including medical insurance.

If this Senior System Engineer position is of interest, please click Apply or get in touch with Steven at Orion.

Company description:

Mller UK & Ireland is wholly owned by the Unternehmensgruppe Theo Mller which employs over 24,000 people throughout Europe. In the UK, Mller develops, manufactures and markets a wide range of branded and private label dairy products made with milk from more than 1,700 British farmers. The Mller brand is ranked at No.7 in The Grocers Top 100 list of Britains Biggest Brands, and is also the 7th most chosen brand in the UK.

Job description:

Multi-Skilled Engineer

Location: Droitwich

Shift Pattern: 4 on 4 off (7AM-7PM / 7PM-7AM)

Contract Type: Permanent

Are you a proactive and skilled engineer looking to join a forward-thinking manufacturing team?

Were seeking a Multi-Skilled Engineerto deliver high-quality maintenance and drive continuous improvement across our site.

Your Role:

As a key member of the engineering team, youll be responsible for both planned and reactive maintenance, ensuring equipment is returned to service swiftly and efficiently. Youll also play a vital role in identifying cost-effective improvements to enhance reliability and performance.

Key Responsibilities:

• Interpret and work from electrical, pneumatic, and mechanical drawings.
• Apply strong electrical (HNC level) and sound mechanical skills to diagnose and resolve faults.
• Perform preventative, condition-based, and corrective maintenance tasks.
• Support continuous improvement and FMEA activities.
• Identify and implement asset and process improvements.

What Were Looking For

• Recognised engineering apprenticeship.
• HNC in Electrical Engineering preferred (or Mechanical with electrical competence).
• Experience in automation and CI tools is a plus.
• Proven background in maintenance within a manufacturing environment.
• ONC/HNC qualifications.
• IOSH or NEBOSH certification (desirable).

Please note: This is a rotating shift role 4 on 4 off, days & nights (7AM-7PM / 7PM-7AM)

Whats in It for You?

• Clear career development pathways.
• Long-term opportunities with a company that invests in its people.
• Generous annual leave (276 hours).
• Access to the Mller Rewards Platform discounts at major retailers.
• Free onsite parking.
• Supportive and collaborative team culture.
• Life assurance and pension scheme.
• Annual bonus of up to 5% (subject to company performance).

A well-established, independently owned security systems specialist is expanding its regional engineering team and is now seeking a Security Installation & Service Engineer to support new and existing customer sites.

This Security Installation & Service Engineer role offers a varied mix of new installations, planned preventative maintenance and reactive call-outs across commercial environments. You will be trusted to work autonomously, diagnose faults efficiently and deliver high standards of workmanship on every visit.

As a Security Installation & Service Engineer, you will be involved in installing and maintaining intruder alarm systems, with occasional cover on servicing activities during holiday or sickness periods. The role suits a proactive engineer who enjoys problem-solving, understands compliance requirements and can complete small associated electrical remedial works when required. What you’ll be doing

• Installing and maintaining intruder alarm systems to industry standards
• Attending fault-finding and breakdown call-outs as part of a rota
• Carrying out preventative maintenance visits
• Completing accurate job reports and documentation
• Representing the business professionally on customer sites

What we’re looking for

• Proven experience as a Security Installation & Service Engineer or similar role
• Background in intruder alarm installation and servicing
• Ability to fault-find confidently and work independently
• Strong communication skills, both written and verbal
• Full UK driving licence

Advantageous experience

• Risco intruder products
• CCTV, Access Control and Fire Alarm systems
• NSI / BAFE environments

Package & benefits

• Salary in the region of £35,000–£40,000, dependent on experience
• Overtime and call-out payments on top of basic salary
• Travel time paid as overtime for journeys exceeding 1 hour each way
• Holiday allowance increasing from 20 to 25 days with service
• Full-time, permanent position with long-term stability

This is an excellent opportunity for a Security Installation & Service Engineer looking to join a supportive, technically strong business with consistent work and clear expectations.
Security Installation & Service Engineer

Corriculo Ltd acts as an employment agency and an employment business.

#AP #indhigh

The role of a Service Engineer UK is extremely varied, on a daily basis you will be responding to a variety of service call outs, completing fault finding & diagnosis on site, regular servicing of automatic pedestrian doors and participating in new system installs & updates. Respond to calls for service as directed by the Planning team Fault finding and remedy faults within our customer service level agreements Maintenance, service and repair of auto pedestrian doors Control of spare parts Carry out PPM (planned preventative maintenance) Participate in new system installations and upgrades Carry out company documentation efficiently and on time where required Promote the cross sale of Company products where possible Being flexible and travel sometimes at short notice to response to urgent requests or extend hours to fix problems as they occur.
This is a field based position with strong prospects for career progression and personal development technically.
If you have Electrical experience and have a mechanical mindset, this role will be perfect for you.
Competitive salary structure ? Call out rota: £200 per week, 1 in 5 weeks ? Overtime readily available and paid at premium rates ? 25 days annual leave plus all statutory bank holidays ? Fully stocked van and toolkit ? A range of employee benefits including: Company pension scheme 4% employer contribution -------- Life assurance scheme 4x annual salaryEmployee proactive health care Enhanced family leave Mental health support Cycle scheme
Great culture and a positive culture, providing an excellent working environment
Driving Licence Essential

Our OEM Client based in Gaydon, is searching for a Battery Test Delivery Engineer to join their team, Inside IR35. This is a contract position with a proposed end date of 31st March 2027.

Umbrella Pay Rate: £27.03 per hour.

The Opportunity:

Using state-of-the-art facilities, you’ll provide the power behind our vehicles working in our Engineering Operations Powertrain team. The company has made a major investment in new testing capability to ensure future Powertrain development can take place and meet the business requirement to develop new and exciting products.

The Battery Test Operations Team is part of Powertrain Test Operations within Product Engineering Operations. The team maintains productive test workflow for HV Battery development at our internal test labs at ABE Lyons Park (Coventry) and BatLab (Gaydon), delivering high quality electrical characterisation and performance data at cell, module and pack level. The team also supports HV battery activity at other internal JLR sites and External test facilities.

The Battery Test Delivery Engineer roles will focus on the efficient delivery of quality assured test data in support of the development and design verification (DV) of HV Traction Battery Systems. Based at either the Advanced Battery Engineering lab (ABE) in Coventry or BatLab in Gaydon, you’ll operate across the facility, co-ordinating test preparation, planning and delivery, managing workflows for your allocated tests, and leading problem-solving activities to ensure the satisfaction of customer test requests, ensuring adherence to safety policies and procedures.

Key Accountabilities and Responsibilities:

• Take full ownership of battery test delivery by ensuring thorough preparation of both the test facility and test components, while adhering to agreed test schedules to enable the timely and accurate delivery of data.
• Provide technical expertise in the setup and execution of battery tests, including the measurement and interpretation of data that will inform key engineering decisions.
• Plan, coordinate, and oversee the activities of small project teams to ensure testing objectives are met efficiently and effectively.
• Support the review of test requests, assessing their feasibility and ensuring they fall below EUCAR Hazard Level 4.
• Act as a champion for process documentation in line with the Way and Safe Systems of Work (SSoW), while also supporting the collection and reporting of team KPIs to LL6 and senior management.

Skills Required:

• Demonstrated experience in supervising engineering teams, offering technical advice and guidance, and a proven ability to mentor and train others—particularly technicians, apprentices, and skilled associates.

• Extensive experience in requirements capture, data acquisition, control systems, programming of automated tests, as well as the analysis and reporting of test data.

• A natural problem-solver with a structured and methodical approach to resolving technical challenges in complex environments.

• Strong understanding of Health and Safety regulations, including Risk Assessments, COSHH, and Safety Data Sheets (SDS).

• Sound knowledge of working in high-voltage or high-risk environments, with hands-on experience in Lithium-ion battery technology.

• An individual who can positively challenge existing thinking while building credibility and trust through both experience and personal approach—aligned with and championing Creators’ Code.

Desirable Education Requested:

• Degree education desirable.

Workshop Plant Fitter
Location: Coventry
Salary: £20 – £22 per hour + Overtime + Benefits
Recruiter: NEOS Engineering

NEOS Engineering are currently working with a well-established and highly respected plant hire organisation that is looking to bring an experienced Workshop Plant Fitter into their growing team.

This is a fantastic opportunity to join a business known for its modern fleet, strong reputation, and commitment to high standards of maintenance and customer service.

The Role

As a Workshop Plant Fitter, you will be responsible for the service, maintenance, and repair of a wide range of heavy plant equipment within a workshop environment.

Key responsibilities include:

• Carrying out routine servicing and inspections on plant machinery
• Diagnosing and repairing mechanical, hydraulic, and electrical faults
• Completing repairs and refurbishments within the workshop
• Maintaining detailed service records and job reports
• Ensuring all work is completed to high safety and quality standards

The Candidate

We are looking for a skilled and motivated engineer who takes pride in their work.

Ideal background:

• Proven experience as a Plant Fitter, Workshop Engineer, or similar
• Strong knowledge of hydraulics, electrics, and diesel engines
• Experience working on equipment such as excavators, dumpers, rollers, and telehandlers
• Ability to work independently and as part of a team

What’s on Offer

• £20 – £22 per hour depending on experience
• Plenty of overtime available
• Modern, well-equipped workshop
• Ongoing training and development opportunities
• Stable, long-term position with a growing company
• Supportive and professional working environment

If you’re a Workshop Plant Fitter looking for your next opportunity with a forward-thinking organisation, apply today through NEOS Engineering.

Stone, Staffordshire

Competitive salary

VIQU have partnered with a leading organisation in operational technology and digital transformation who are seeking an experienced Lead Control Systems Software Engineer to join their Energy division. The successful candidate will be responsible for delivering high-quality SCADA and RTU-based control systems within the transmission and distribution sector, leading small project teams across the full project lifecycle. As the Lead Control Systems Software Engineer, you will work closely with Project Managers to plan, coordinate, and technically guide the delivery of multiple short turnaround projects, including system upgrades, extensions, and modifications. You will play a key role in ensuring technical quality, reviewing engineering outputs, and supporting the development of junior team members, all within highly regulated environments.

Key Responsibilities of the Lead Control Systems Software Engineer:

Lead small project teams through the full lifecycle – from requirements and design through to implementation, testing, and customer acceptance

Configure and deliver SCADA and RTU-based control systems

Produce and review technical documentation including design specifications, I/O schedules, and test specifications

Carry out and support Factory Acceptance Testing (FAT), both internal and customer-facing

Provide technical oversight, checking and reviewing engineering work produced by others

Support and mentor less experienced engineers through coaching and knowledge sharing

Collaborate with Project Managers to ensure timely and high-quality project delivery

Work within structured engineering processes, adhering to quality assurance and change control procedures

Travel and work on-site as required

Essential Skills & Requirements of the Lead Control Systems Software Engineer:

Minimum 5 years’ experience in advanced SCADA configuration using platforms such as COPA-DATA Zenon, Codra Panorama, ArchestrA System Platform or similar, with at least 3 years producing design documentation and test specifications (FDS, SDS, I/O schedules) and performing Factory Acceptance Testing (FAT)

Proven experience in technical review and assurance of engineering outputs, with a strong track record of leading technical delivery within projects or sub-teams and mentoring or supporting junior engineers

Strong understanding of the engineering project lifecycle (e.g. V-model) and formal quality assurance processes, with willingness to travel and work away when required plus a full UK driving licence

Experience with transmission and distribution substation control systems and communication protocols such as IEC 60870-5-101/104, IEC 61850 and DNP3

Familiarity with RTUs and bay controllers (e.g. GE, SEL or similar), network architectures including RSTP, PRP and HSR, and exposure to software-defined networking solutions (desirable)

To discuss this exciting opportunity in more detail, please APPLY NOW. Alternatively, you can contact Katie Dark directly via the VIQU website.

Lead Control Systems Software Engineer

Stone, Staffordshire

Competitive salary

TPBN1_UKTJ

Our client, a leading automotive manufacturing business, is looking for an experienced Technical Engineer / Automation Engineer / Controls Engineer to support advanced automated production lines. The successful candidate will have a strong background in complex manufacturing environments and a proven ability to deliver technical solutions across automated processes.Contract - Outside IR35 or PERM available.Flexible hourly rates - initial 6-month contract with strong potential for extension Salary dependant on experience Monday to Thursday 8am - 5pm, Friday 8am - 2pmBirminghamSite based Technical Engineer / Automation Engineer / Controls Engineer Job Description Act as the technical lead for automated manufacturing processes across multiple production stages. Work with internal teams, customers, and suppliers to deliver efficient and high-quality manufacturing solutions. Develop quality systems, define FAT/SAT criteria, and resolve shop floor/process issues. Support new production line development, technology selection, and process optimisation. Lead problem-solving activities and contribute to continuous improvement initiatives. Technical Engineer / Automation Engineer / Controls Engineer Essential Skills / Experience / Qualifications 5+ years' experience in automated manufacturing environments Strong analytical and problem-solving skills Experience with PLCs (Siemens, Beckhoff) Understanding of continuous processes, materials conversion, and packaging Ability to communicate technical information clearly and work in fast-paced environments Full UK driving licence Desirable: Knowledge of IATF 16949 and ISO 9001FMCG experience Technical Engineer / Automation Engineer / Controls Engineer Company Benefits Flexible contract (Outside IR35)Competitive ratesLong-term opportunitiesWork on advanced automotive manufacturing projects

Location - Staffordshire / Client Sites

Are you an Electrical Engineer with commissioning experience?
Do you enjoy working on site and seeing projects through to completion?
Would you like to be part of a team delivering control systems into critical UK infrastructure?

What’s in it for you
Highly attractive basic salary
Living away allowance and paid overtime
28 days holiday plus bank holidays
Ongoing training and development
6.5% pension scheme
Life assurance (4x annual salary)
Private healthcare

What will you be doing?
Carrying out site acceptance testing and commissioning in line with approved documentation
Supporting and delivering factory acceptance testing
Supervising installation activities on client sites
Producing and managing commissioning files and documentation
Marking up drawings and schematics where changes are identified
Deploying and verifying configuration files to PLCs, RTUs, SCADA systems and network devices
Carrying out fault finding on electrical and electronic systems
Managing LOTO procedures and ensuring safe systems of work

Where you’ll be doing it
You’ll be joining a well-established engineering business delivering automation and control system projects across energy and other highly regulated sectors. The team works on projects ranging from system modifications through to full new-build installations, both from their Stone office and at client sites across the UK.

What you’ll need
Qualification or strong experience in Electrical Engineering
Experience of test and commissioning activities
Ability to read and interpret electrical drawings and schematics
Experience fault finding on electrical and electronic systems
Understanding of communication networks and protocols (fibre, copper, Ethernet, serial)
Knowledge of electrical safety and LOTO procedures
Experience working with substations, secondary systems or SCADA (desirable)
BS7671 18th Edition and C&G 2391 Inspection & Testing
Full UK driving licence and willingness to travel

We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later.

Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.*

Configuration Engineer Location: Kidderminster Salary: £21,157.50 - £24,784.50 per annum. Vacancy Type: Full-time, Mon-Fri working hours 37.5 hour a week contract. Permanent salary. As an IT recycler and supplier of IT Services we have overseen more than 3 million devices through the IT lifecycle and, as a result, are perfectly placed to provide our customers with guidance and advice through this complex market. We offer a huge range of additional services, such as IT spares and logistics throughout the UK, as well as datacentre and office relocations, configuration and build, bonded stock, engineers and project managers along with Greensafe Global, our hardware specialist IT brokerage service. The IT Configuration Technician is responsible for the configuration, staging, and preparation of IT equipment in line with defined KPIs and SLAs. This includes BIOS configuration, asset tagging, operating system imaging, and post-deployment setup to ensure all devices are fully functional, secure, and customer-ready. Key Responsibilities: Image and configure desktops, laptops, printers, tablets, and other assets per company standards and in line with SLA’s.
Configure BIOS settings and apply required system customisations.
Execute asset tagging and accurately record customer-specific data in asset management systems.
Complete post-imaging configuration, validation, and quality checks to ensure devices meet required standards.
Meet defined KPIs and SLAs, including turnaround times, productivity targets, and quality benchmarks.
Maintain a clean, safe, and organised workspace in compliance with health and safety policies.
Collaborate effectively with team members to achieve daily production targets and operational goals.
Provide support to colleagues to maintain workflow efficiency and resolve bottlenecks.
Train and mentor team members to ensure consistency, quality, and adherence to processes.
Follow data security, handling, and compliance procedures when working with customer devices and information.
Competencies & Behaviours: Strong understanding of PC hardware components and architecture.
Proficiency in Microsoft Windows operating systems.
Familiarity with Android and iOS operating systems is desirable.
Experience with imaging and deployment tools (e.g., MDT, SCCM / Microsoft Endpoint Configuration Manager) is advantageous.
Strong attention to detail and commitment to quality standards.
Ability to work efficiently under pressure in a fast-paced, high-volume environment.
Good problem-solving and troubleshooting skills.
Effective time management and ability to prioritise tasks.
Clear and professional communication skills, both written and verbal.
Ability to lift and move IT equipment (up to 15–20 kg).
Ability to stand for extended periods while performing configuration tasks.
Benefits: Staff discount online store
Company events
Refer a friend Scheme - £150+
On-site Fully Equipped Gymnasium
To Apply If you feel you are a suitable candidate and would like to work for Greensafe IT, please do not hesitate to apply

C++ Software Engineer – Warehouse Management Systems We’re hiring a C++ Software Engineer to work on a large‑scale Warehouse Management / Control System used to run highly automated distribution centres across retail, logistics, and industrial environments. This is a systems‑level role focused on software that controls real‑world warehouse operations in real time, rather than web or UI-driven applications. What you’ll be working on Development of C++ software for WMS / WES / WCS platforms
Real‑time control of automated warehouse environments
Integration with conveyors, robotics, sortation, and storage systems
Long‑term, production systems used in live operational sites
Linux‑based environments with strong engineering standards Tech stack C / C++
Java (supporting)
Linux / Unix
Shell scripting
Jira or similar tooling What we’re looking for Commercial experience with C++
Comfortable working on complex, integrated systems
Exposure to warehouse systems, automation, industrial software, or similar environments is a strong advantage Location UK‑based role
Occasional office presence in the Midlands / South Midlands, with a largely remote working model If you’re interested in C++ development that sits close to hardware and automation, I’d be happy to share more details

A global friction welding manufacturer is looking for a Control Systems Engineer to join their team based in the Birmingham area

The ideal candidate will be a hard-working and adaptable Engineer with a strong design background. Operating at the Birmingham site, you will be responsible for the design and technical support of industrial control panels and more
This is a fantastic opportunity with a multi-national welding company who supply to some the biggest names in the world

Role: Control Systems Engineer
Office Location: Birmingham
Salary: 55,000 - 60,000

The key responsibilities of the Control Systems Engineer role will be:

• Design, develop, and implement software for industrial control systems within automation, robotics, and machinery environments.
• Program PLCs, HMIs, and real-time motion control systems for both hydraulic and electric drive applications.
• Integrate systems across multiple devices and communication protocols (e.g. industrial Ethernet networks).
• Produce comprehensive technical documentation, including specifications, design details, and test procedures.
• Support commissioning activities at customer sites, including occasional international travel and short-notice assignments.
• Contribute to the full software lifecycle, including requirements definition, design, testing, and deployment.
• Assist with additional tasks as required to support overall project delivery and team objectives.

The key requirements of the Control Systems Engineer will be:

• Strong experience with industrial PLC and HMI programming platforms (e.g. Siemens, Allen-Bradley or similar).
• Experience integrating motion control and drive systems.
• Familiarity with industrial communication protocols such as EtherNet/IP, PROFINET, or similar.
• Knowledge of IEC 61131-based programming.
• Experience with additional programming languages (e.g. C++, C#, JavaScript) is advantageous.
• Exposure to real-time or embedded control systems is desirable.
• Ability to produce clear, structured technical documentation across the software lifecycle.

Please apply online or contact (url removed) for a confidential conversation

Executive Network Group, encompassing Technical Network, Network HR, HSE Network & Procurement People, sourcing mid to senior level management for automotive, aerospace, engineering and manufacturing industrial sectors, with a portfolio of services including executive search, advertising, MRO for permanent and interim contract recruitment services

Position: CNC Production Engineer

Location: Tamworth

Salary: £30,000 - £40,000

CNC Production Engineer required. Our client is a well-established manufacturer of material handling equipment who are seeking an experienced CNC Production Engineer to join their team. The successful candidate will be responsible for operating CNC mills & lathes as well as converting CAD drawings to CAM files ready for production.

CNC Production Engineer Position Overview

• Converting CAD drawings to CAM files for production
• Setting up and running CNC Mills & Lathes for small batch production
• Quality checking parts
• Organise the supply of materials for production
• Organising tools and tooling supplies
• Assisting with build and assembly processes

CNC Production Engineer Position Requirements

• 2+ years of experience with CNC Machining, both milling and turning
• Experience with the creation of CAD/ CAM files
• Good organisational skills & willingness to work as part of a small team
• Based in a commutable distance of Tamworth

CNC Production Engineer Position Remuneration

• Salary £30,000 - £40,000 depending on experience
• Monday to Friday,08:00 - 16:30 full-time, permanent position.
• Company Pension & Holiday allowance

Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.

We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

Gas Suppression Engineer Join a Growing Industry Leader!

Location:Field-based role covering the UK
Company:IPH Fire Solutions Ltd

About Us:
AtIPH Fire Solutions Ltd, part of the Ranger Group,werepassionate about protecting lives and property throughcutting-edgefire suppression systems. As a leading UK distributor, we design, install, andmaintainpremium solutions for commercial and residential sectors. Our reputation is built on innovation, reliability, and exceptional customer serviceandweregrowing fast!

Why Join Us?

• Competitive Salary:£34,000£40,000 (up to £50,000 with overtime)

• Perks:Company van (air-conditioned), smartphone, specialist tools

• Work-Life Balance:25 days holiday + bank holidays + option to buy 5 extra per year

• Extra Rewards:Travel allowance, double pay on Sundays and bank holidays

• Career Growth:Development and progression opportunities

• Supportive Team:Be part of a company that valuesexpertiseand collaboration

• Private Medical Insurance

• Life Insurance

• Employee Assistance Programme - supporting your health and wellbeing, security and peace of mind.

Your Role:
As aFire Suppression Engineer,youllbe the trusted expert ensuring our systems perform flawlessly.

Installing, servicing, and commissioning FM200, Novec 1230, and inert gas fire suppression systems
Performing cylinder installations, pressure checks, and system upgrades
Conducting room integrity tests and ensuring compliance with relevant standards
Working in data rooms, comms rooms, and other mission-critical environments

Understanding fire detection interfaces, control panels, and system integration.Youllwork on a variety of advanced technologies, including FM200,Novec1230, CO2, Inert Gas,Watermist, Aerosol (FirePro), and Kitchen Suppression Systems (Kitchenguard,Amerex, Ansul).

WhatYoullDo:

• Service,maintain, and commission fire suppression systems to British Standards

• Diagnose and resolve faults using strong electrical principles

• Produce detailed technical reports and service certificates

• Deliver outstanding customer service and represent IPH professionally

• Respond to callouts and occasional weekend work with overtime pay

WhatWereLooking For:

• Minimum 1 year experience with fire suppression systems

• Mechanical/Electrical background

• Full UK DrivingLicence

• Strong attention to detail and ability to work independently

• Excellent communication and problem-solving skills

Ready to Make a Difference?
Join us and play a vital role in safeguarding lives and property across the UK. Apply today and take your career to the next level!

As an equal opportunities employer, RangerFS is committed to the equal treatment of all current and prospective employees and does not condone discrimination on the basis of age, disability, sex, sexual orientation, pregnancy and maternity, race or ethnicity, religion or belief, gender identity, or marriage and civil partnership.

We aspire to have a diverse and inclusive workplace and strongly encourage suitably qualified applicants from a wide range of backgrounds to apply and join Ranger