Automation Engineer / PLC Engineer / Controls Engineer – West Yorkshire
£65,000 package (includes on-call uplift) + 25 days holiday + training + company vehicle for site work

An opportunity for an Automation Engineer with strong PLC fault-finding skills to join a growing West Yorkshire-based industrial automation business.

This Automation Engineer role is service-focused rather than project-heavy and suits a PLC Engineer / Controls Engineer who enjoys problem-solving, variety and technical autonomy without constant long-haul travel.

The Automation Engineer role -

* Remote fault-finding and diagnostics on PLC-controlled machinery and production lines

* Some on-site support for breakdowns and investigations

* Typical site work: 2–3 days per week, mainly Yorkshire and Lancashire day trips

* Mix of modern automation systems and older legacy equipment

* Inspection, testing and reporting of electrical and control systems

On-call explained -

* 9 days in every 28 on call

* Includes 7 overnight on-call days

* Home-based during on-call periods

* Engineers currently average around two calls per week when on call

* On-call uplift included in the £65k package

Key requirements for the Automation Engineer position -

* Automation Engineer / PLC Engineer / Controls Engineer with PLC fault-finding experience

* Ability to interrogate PLC code and understand logic

* Allen Bradley, Siemens or Mitsubishi experience beneficial

* You do not need to program PLCs from scratch

* HNC/D in Electrical or Electronic Engineering preferred

* 18th Edition desirable

* Full UK driving licence essential

* Right to work in the UK without sponsorship

Why this role stands out

* Small, growing business with a relaxed culture

* Strong commitment to training and professional development

* Broad technical exposure rather than repetitive work

* Business has more than tripled turnover year-on-year

Commutable from Leeds, Harrogate, Wetherby, York, Selby, Tadcaster, Otley, Garforth, Castleford and Knottingley

We have a great opportunity for a skilled and adaptable Verification and Validation (V&V) Test Engineer to join our Real-Time Embedded software department!

Salary: Circa £64,000 depending on experience

Dynamic (hybrid) working: typically, 4 days per week on-site, due to workload classification

Security Clearance: British Citizen or a Dual UK national with British citizenship

Restrictions and/or limitations relating to nationality and/or rights to work may apply. As a minimum and after offer stage, all successful candidates will need to undergo HMG Basic Personnel Security Standard checks (BPSS), which are managed by the MBDA Personnel Security Team.

What we can offer you:
Company bonus: Up to £2,500 (based on company performance and will vary year to year)

Pension: maximum total (employer and employee) contribution of up to 14%

Overtime: opportunity for paid overtime

Flexi Leave: Up to 15 additional days

Flexible working: We welcome applicants who are looking for flexible working arrangements

Enhanced parental leave: offers up to 26 weeks for maternity, adoption and shared parental leave -enhancements are available for paternity leave, neonatal leave and fertility testing and treatments

Facilities: Fantastic site facilities including subsidised meals, free car parking and much more…

Healthcare Cash Plan: The Healthcare Cash Plan benefit provides the option to claim cash back on everyday healthcare expenses such as optical, dental, health and wellbeing and more .
The opportunity:

Spanning a diverse portfolio of work packages, you will be working with teams of enthusiastic, dedicated engineers to qualify components of some of the world’s most sophisticated defence systems!

If you have experience of verification and validation in an advanced technological environment, ideally with a background in embedded software development, then we would like to talk to you.

The role requires taking requirements, developing them into robust test cases, preparing and executing tests, capturing data, and delivering actionable feedback to project teams.

You will have to draw upon your strong practical problem-solving skills, data acquisition expertise, and adaptability.

What we’re looking for from you:
Strong experience of Verification and Validation (V&V) activities in an embedded software environment .

Embedded software development experience using Ada.

Experience of turning requirements into structured test cases and procedures.

Experience of working in a lab environment on an electro mechanical product running embedded software.

Good working knowledge of the complete software engineering lifecycle.

Scripting abilities
Desirable, but not essential
Safety critical systems experience

Knowledge of standards such as DefStan 00-55, DO-178C & DO-330

Knowledge of Real Time Operating Systems

Model Driven Design experience

Knowledge of test automation methods

Knowledge of DOORS, Engineering Workflow Management (EWM), Rapita Suite, Rhapsody, LDRA

Breakpoint Analysis experience

Experience of Focused Code Reviews
Our company: Peace is not a given, Freedom is not a given, Sovereignty is not a given

MBDA is a leading defence organisation. We are proud of the role we play in supporting the Armed Forces who protect our nations. We partner with governments to work together towards a common goal, defending our freedom.

We are proud of our employee-led networks, examples include: Gender Equality, Pride, Menopause Matters, Parents and Carers, Armed Forces, Ethnic Diversity, Neurodiversity, Disability and more…

We recognise that everyone is unique, and we encourage you to speak to us should you require any advice, support or adjustments throughout our recruitment process.

Follow us on LinkedIn (MBDA), X (@MBDA_UK), Instagram (MBDA_UK) and Glassdoor or visit our MBDA Careers website for more information.

#LI-RS1

Eligibility for UK security clearance is required.
Please note: this role is not eligible for UKVI sponsorship.

Breakthrough technology is critical to protecting the UK’s Defence and Homeland Security. As an Experienced Consultant, you’ll be right at the heart of that mission—helping to defend against emerging technological and cyber threats.

This is a role where your work genuinely matters. You’ll collaborate with elite, multi-disciplinary teams of scientists, engineers, and designers to explore pioneering concepts and turn them into reality. From first principles to fully functioning prototypes, you’ll be hands-on throughout the entire product lifecycle—capturing requirements, designing architectures, developing and testing solutions, and delivering working systems.

What we’re looking for:

You’ll ideally bring 3+ years’ experience in embedded software development, a strong track record of designing and implementing robust technical solutions, and a relevant degree. You’ll be confident working in Linux, programming in C, and at least one other language such as C++, C#, or MATLAB.

Experience in any of the following would be an advantage:

Bare-metal or RTOS development on ARM targets
High-level software architecture
Embedded software debugging techniques
Electronics development and hands-on debugging
Scripting for test, automation, or signal processing (e.g. Python or MATLAB)Engineers from any sector are encouraged to apply. Defence experience is welcomed but not essential.

This is an exciting time to join. You’ll help build on a strong track record while developing your career at the cutting edge of technology—surrounded by curious, driven people who value individuality, inclusion, and shared purpose.

If you feel you are suitable for this role, please don’t hesitate to apply now. For more information, or to discuss your experience/CV, please do get in touch with Jeremy van Waveren at SoCode- Norwich.

At SoCode, we pride ourselves on an attractive referral scheme.

If you have friends, family or colleagues looking for a new position soon tell them to contact us by either phone or email ensuring they provide us with your name. If we successfully find them a new position, we will provide you with a thank you present to show our appreciation.

#LI-JV1

Electronics Engineer

£30,000-£40,000 + Workshop Based + Days Shift Patten, Monday to Friday (8:00am-4:30pm, 40hrs) + Overtime 1.5x + Training Opportunities + 25 days holiday plus BH + Bonus + Holiday + Pension

Workshop based role commutable from Stoke-on-Trent, Cheddleton, Werrington, Cheadle, Uttoxeter and Buxton

This is an exciting opportunity for a technically minded individual seeking a genuinely interesting role within a rapidly expanding organisation that offers clear progression and structured development.

You will have the chance to significantly broaden your skill set while working with cutting edge technologies and highly specialised electronic products. This is a role that will continuously challenge and develop you.

The company operates within the electronic sector and is currently experiencing sustained growth and expansion. As a result, they are looking to strengthen their team with ambitious individuals who have an interest in research and development, design, testing and quality engineering.

In this role, your day to day responsibilities will include servicing, testing and refurbishing electronic hardware. You will receive comprehensive training to ensure you are fully supported in becoming proficient in the position, with the opportunity to contribute to research and development projects as your experience grows.

The ideal candidate will have hands on electronic workshop experience, be confident fault finding down to component level and demonstrate a genuine interest in working within the industry.

This is an excellent long term opportunity to join a forward thinking business that will actively invest in your technical development and career progression

The Role:

*Testing, repair, service and refurbishment of telecoms hardware products
*Involved in research and development projects
*Working in the telecommunications industry
*Workshop based, in Stoke-On-Trent

*1 in 14 weeks on call

The Person:

*Electronic Engineer/ Test Engineer/ Bench Technician/ PCB Technician or similar backgrounds considered
*Recently graduated Electronic/ Electrical Engineers are encouraged to apply and will be provided training
*Holding either Electronics or Telecommunications Engineering qualifications (e.g. Degree, HNC, HND, BTEC, NVQ, City and Guilds etc)

Reference Number: BBBH(phone number removed)

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.

We are an equal opportunities company and welcome applications from all suitable candidates

Senior Build & Test Engineer
Location: Cambridge (on-site)

A global technology leader and industry leader is looking for a Senior Build & Test Engineer to join its embedded development team. This is a hands-on, high-impact role where you’ll take primary ownership of the CI/CD pipeline and automated test systems that underpin a portfolio of industry-leading products.

You’ll work closely with software engineers, product managers, and other key stakeholders to ensure quality, reliability, and scalability across predominantly (but not exclusively) Linux-based products used worldwide.

What you’ll be doing
Designing, developing, and maintaining automated test infrastructure, spanning both hardware and software
Architecting and improving build and CI/CD systems, with a focus on performance, maintainability, and cost efficiency
Monitoring, analysing, and reporting on quality metrics from in-house testing and real-world field data
Supporting development teams by diagnosing and resolving build, test, and deployment issues
Collaborating with product management and internal stakeholders to prioritise work and maximise impactWhat you’ll bring
A degree in Engineering, Computer Science, or a related discipline
5+ years’ experience in a professional software development environment
Hands-on familiarity with Yocto / OpenEmbedded
Strong experience with Python, JavaScript, and shell scripting
Solid working knowledge of Linux systems (as a user)Nice to have
Experience with digital multimedia or networked systems
Exposure to Kubernetes, AWS, or similar cloud technologies
Familiarity with Gerrit, GitHub, or other code review platformsIf you feel you are suitable for this role, please don’t hesitate to apply now. For more information, or to discuss your experience/CV, please do get in touch with Jeremy van Waveren at SoCode- Norwich.

At SoCode, we pride ourselves on an attractive referral scheme.

If you have friends, family or colleagues looking for a new position soon tell them to contact us by either phone or email ensuring they provide us with your name. If we successfully find them a new position, we will provide you with a thank you present to show our appreciation.

#LI-JV1

Job Title – Multi Skilled Maintenance Engineer

Location – Hull

Salary: £50,000
Shift: Rotating Days & Nights

Job Role

The Multi Skilled Maintenance Engineer will join a well-established and high-performing manufacturing business based in Hull, working within a skilled engineering team on a busy production site. This Multi Skilled Maintenance Engineer position offers excellent stability, strong earning potential, and the opportunity to work on modern production and packaging machinery within a fast-paced industrial environment.

The successful Multi Skilled Maintenance Engineer will be responsible for both electrical and mechanical fault finding, carrying out planned preventative maintenance, and supporting continuous improvement initiatives across the site. The role operates on a rotating days and nights shift pattern and requires a proactive engineer who can work efficiently under pressure while maintaining high safety and quality standards.

If you are a driven Multi Skilled Maintenance Engineer looking for a £50,000 package within a secure and well-invested site, this opportunity offers long-term stability and technical challenge.

Sector – FMCG / Industrial Manufacturing

Non-Negotiable Requirements of Multi Skilled Maintenance Engineer

Must be Multi Skilled (Electrical Bias preferable)

Must hold a recognised Engineering Qualification (minimum Level 3 or equivalent)

Must have experience within a Manufacturing environment

Essential Requirements of Multi Skilled Maintenance Engineer

Strong electrical and mechanical fault-finding abilities

Experience working on production or automated machinery

Ability to work independently and as part of a team

Comfortable working rotating Days & Nights

Desirable Requirements of Multi Skilled Maintenance Engineer

FMCG manufacturing experience

PLC fault-finding experience

Experience working on high-speed production lines

The Multi Skilled Maintenance Engineer Will Benefit From

£50,000 salary

Working within a stable and well-invested manufacturing site

Long-term job security

Opportunity to develop technical skills within a fast-paced production environment

If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.

For further details contact Adem Halil at Pioneer Selection on [insert number

About the job
Maintenance Engineer - Metal Processing
West Midlands
Competitive salary + benefits (DOE)

We are looking for a hands-on Maintenance Engineer to keep our processing saws running safely, accurately, and at pace in a busy metals service centre environment. If you enjoy fault-finding, improving uptime, working on industrial metal processing saws and machining equipment - this one’s for you.

What you’ll be doing:

• Planned & reactive maintenance on band and circular saws and potentially CNC’s, For example saws manufactured by Schelling, Friggi, Mayer, Kaltenbach, Behringer and Danobat .
• Mechanical, electrical, hydraulic & pneumatic fault-finding
• Fast breakdown response to protect output and customer service
• Setting & calibrating saw parameters for cutting accuracy
• Maintaining guarding, interlocks, emergency stops & isolations (PUWER / LOTO)
• Supporting continuous improvement and reliability initiatives

What we’re looking for:

• Safety-first mindset with good UK H&S awareness
• Proven maintenance experience in a metals service centre or manufacturing environment
• Strong mechanical bias with solid electrical knowledge
• CNC saw experience desirable but not essential
• Engineering qualification (NVQ Level 3 / City & Guilds / HNC preferred)

Why join us?

• Competitive salary
• Stable, established business with ongoing investment
• Supportive management team and well-maintained equipment
• Training and upskilling encouraged

Shift pattern: to be agreed. Options include days and shifts
Location: Based in West Midlands with Service Centres throughout the UK

Controls Engineer – Shropshire - Permanent - £50-65k + car allowance + hybrid working + bonus

+++Wide variety of sectors & types of projects, defined career path, company is an innovator, embraces new technologies, superb/modern office space+++

Samuel Frank is recruiting for a Controls Engineer to join a rapidly growing Shropshire based systems integrator. As a Controls Engineer you’ll be working on a wide range of projects, including but not limited to heavy industry, marine applications, manufacturing, energy storage and distribution or metal processing plants.

Key aspects of the Controls Engineer position include;

* Software design, including Software Design Specifications and production of software deliverables for PLC, HMI, SCADA, robots or variable speed drives

* Electrical / controls concept design including Functional Design Specification, Safety Requirements Specification, Single Line Diagrams, Network Topology, Device Layout, Cause & Effect Matrix, Safety Block Diagram etc.

* Conduct FATs and SATs

* Control Engineers who are Certified Machine Safety Engineers (CMSE) or TUV Functional Safety accredited will be considered favourably – not essential

* Role is hybrid, so when you’re not working on customer sites the expectation is that you’re in the office on Mondays, Wednesdays and another day of your choice and the remaining two days are home-based.

* When you’re in the office you’ll be working in modern, high specification workspace – this is a cool place to work!

* Role won’t involve extended periods on site. The company has a commissioning and installation team that picks up the heavy lifting in terms of site work. For example, the Controls Engineer might expect to be on site for 2-3 weeks at the end of a job where they’ve been home and office based for 6 months.

* Company promotes from within and has a clear career progression path for Controls Engineers joining the team

* They’re innovators, the company push the boundaries of what’s possible with existing and new technologies.

The position is commutable from the following places - Market Drayton, Telford, Wolverhampton, Shrewsbury, Bridgnorth and Newport and because you only need to be in the office 3 days a week, it’s also commutable from Stafford, Stone, Stoke, Wolverhampton, Walsall, Kidderminster, Lichfield, Cannock, Rugeley or Tamworth

Chirnside, commutable from: Berwick upon Tweed, Eyemouth, Coldstream, Cockburnspath, Dunbar, Haddington, North Berwick, Kelso & all surrounding areas

£46,500 + Overtime + Pension + Excellent Company Benefits

Are you a Maintenance Engineer looking for a Monday to Friday days-based role with excellent earning potential through overtime?

This is a fantastic opportunity to become a key part of a fast-paced manufacturing environment, where you’ll keep essential production equipment running at its best. You’ll take responsibility for both planned and reactive maintenance, reducing downtime and driving continuous improvement across the site.

Alongside a competitive salary, you’ll have the chance to significantly boost your earnings through enhanced overtime rates and progress your career within a business that values development and invests in its people.

Our client is a well-established UK manufacturer known for its commitment to quality, safety, and innovation. You’ll join a supportive engineering team that encourages professional growth, technical training, and long-term career opportunities.

This position would suit a Maintenance or Agricultural Engineer seeking a stable, days-based role with strong earning potential and room to develop.

The Role:

Perform planned and reactive maintenance on production machinery
Identify and implement continuous improvement opportunities across the site
Monday to Friday, 7am - 4pmThe Candidate:

Mechanically or electrically qualified
Previous experience in maintenance or agricultural engineering
Self-motivated with a proactive approach to problem-solving

Reference Number: BBBH(phone number removed)

To apply for this role or to be considered for further roles, please click “Apply Now” or contact Patrick Simper at Rise Technical Recruitment.

Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.

The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client.

We are an equal opportunities company and welcome applications from all suitable candidates

Matchtech are supporting the recruitment for a key client within the Rail industry for a Testing & Commissioning / CAD Engineer - Light Rail, Signals & Systems. This is a 4-6 month initial contract, offering outside IR35 working and working on a hybrid basis from Birmingham.

About the Project

Our client acts as senior design partner in the £1.3 bn Midland Metro Alliance, delivering six tramline extensions, covering ~54 km including 34 km double track and 80 stations/tram stops.
Scope includes track alignment, overhead lines, signalling, power, telecoms, systems integration, and the UK’s first catenary-free tram sections.
The extensions support major connectivity boosts - to HS2 (Curzon Street), airport, Brierley Hill, Eastside to Solihull - extending to 2026-27.

Role Overview

We are seeking experienced Testing & Commissioning Engineers, T&C Technicians, or CAD Technicians with strong backgrounds in light rail, signalling and systems design. Your expertise will ensure successful system integration and commissioning.

Key Responsibilities

Develop and execute test plans covering signals, track, SCADA, OLE, power, and communications.
Coordinate with internal teams, contractors (e.g., Colas Rail), and WMCA stakeholders on T&C phases.
Perform on-site activities: factory/site acceptance testing, first-run commissioning, resolving interface issues.
Create and maintain technical documentation: test procedures, interface control documents, CAD drawings, and specifications.
Validate signalling systems: MOVA/SCOOT (if applicable), platform-tram clearances, junction priority, and safety requirements.
Support configuration management, design verification, and compliance with CDM and rail safety standards.

Candidate Requirements

Background in light rail/trolley/tram systems, ideally involving signals and systems T&C.
Proficient in CAD (AutoCAD, Rail-specific tools).
Proven experience with testing & commissioning in rail transit environments.
Strong systems engineering and interface coordination skills.
Knowledge of rail standards, health & safety, and UK CDM regulations.
Active willingness to be based in Birmingham, with flexible arrangements for outstanding talent.
Availabilty for immediate start; commitment for 4-6 months, with potential extension.
Open to both inside and outside IR35

What’s in it for You

Be part of a high-profile, transformative £1.3 bn light rail expansion - the Midland Metro will serve 80+ tram stops, integrate HS2 and airport connectivity, and enhance regional mobility.
Work with the clients multidisciplinary rail team - expert systems engineers, commissioning specialists, and integrators.
Professional growth via hands-on testing, commissioning, and systems integration on a large-scale infrastructure program.
Competitive contract terms, with inside/outside IR35 flexibility and Birmingham location or remote options

Overview

Expleo is a leading Global Engineering Services Provider with UK presence in 10 locations. We are seeking a Digital Design Engineer to be responsible for the design of digital hardware including PCB, FPGA level design and also includes embedded software design on target microcontrollers.

The role demands 5 days a week on the client’s site in Guildford working on exciting space projects.

This role represents a great opportunity to work on cutting edge technology projects. Valued attributes are a team player who can use their initiative and has a real passion for engineering with an attention to detail, combined with a thorough, methodical approach to problem solving.

Responsibilities

High Speed Digital Hardware Design
Schematic capture board level design.
Embedded software development of 8/16/32Bit Microcontrollers
Design, implementation and verification of FPGA’s in VHDL
Hardware Debugging and board bring up
Responsible for Manufacture, Test and Delivery of Existing Hardware Designs
Generation of appropriate design documentation.
Work closely in a core project team.
Responsible for the delivery of all aspects of the defined/delegated package of work which includes, Technical Solution, Budget and Schedule.
Involvement in SSTL peer reviews

Qualifications

Degree in engineering with ideally electrical background
Where applicable suitable experience in addition to a lower qualification would be acceptable

Essential skills

Knowledge of FPGA design in VHDL.
Good knowledge of writing embedded software in C and assembler
Knowledge of Lab Test Equipment
Excellent communication skills
Commitment to deliver to challenging schedules
Good inter-personal skills
Organised approach
Good planning skills

Desired skills

Extensive experience of digital board level design.
Experience of analogue circuit design desirable but not essential
Experience of system level debug and test
Knowledge of Work Package Management and Matrix Management structure preferable

What do I need before I apply

Ability and willingness to travel to and work on the clients Guildford site 5 days per week

Benefits

Collaborative working environment - we stand shoulder to shoulder with our clients and our peers through good times and challenges
We empower all passionate technology loving professionals by allowing them to expand their skills and take part in inspiring projects
Expleo Academy - enables you to acquire and develop the right skills by delivering a suite of accredited training courses
Competitive company benefits
Always working as one team, our people are not afraid to think big and challenge the status quo

As a Disability Confident Committed Employer we have committed to:
Ensure our recruitment process is inclusive and accessible
Communicating and promoting vacancies
Offering an interview to disabled people who meet the minimum criteria for the job
Anticipating and providing reasonable adjustments as required
Supporting any existing employee who acquires a disability or long term health condition, enabling them to stay in work at least one activity that will make a difference for disabled people"We are an equal opportunities employer and welcome applications from all suitably qualified persons regardless of their race, sex, disability, religion/belief, sexual orientation or age".

We treat everyone fairly and equitably across the organisation, including providing any additional support and adjustments needed for everyone to thrive

Field Service Engineer - West / North West London

A fantastic opportunity has become available for an experienced Field Service Engineer to join a respected and forward‑thinking print solutions provider. You’ll support a diverse customer base across the North / West London region working with leading MFD and print technologies.
This is a great role for someone who enjoys autonomy, variety, and being part of a supportive, technically strong service team known for high standards and a genuine customer‑first approach.

What You’ll Be Doing

Responding to service calls and completing repairs on MFDs/photocopiers
Diagnosing faults and carrying out effective repairs through cleaning, adjustment, or part replacement
Performing scheduled preventative maintenance to minimise downtime
Installing new devices and ensuring optimal performance for customers
Escalating complex issues and working closely with technical support teams
Maintaining accurate service records, documentation, and customer updates

Package & Benefits

Salary up to £35,000 + Bonus
Company Car
Mobile Phone & Laptop
Pension Scheme
Private Healthcare
25 Days Holiday (rising to 28 with service)
How to Apply
Click the link below to submit your CV.

If you are currently seeking an print position, please send us a copy of your CV via the link below or call our mainline on (phone number removed) and ask for Nicola Foxall (url removed) who will give you a call for a confidential chat. CV Bay Ltd are a UK based Engineering recruitment company with teams specialised in recruiting for the Engineering sector and have a range of Print production roles in this sector.

#ENG1

£45,000 - £55,000

• Excellent Package Benefits
• Monday to Friday - Varying shift options on offer to meet you work/life balance.

Location: West Midlands - easily commutable from Telford, Stafford, Shrewsbury, Bridgnorth, Wolverhampton, Market Drayton, Birmingham, Kidderminster and Penkridge - Shropshire / Staffordshire

The Role:
Due to continuing company expansion in the UK, we are now looking to recruit multiskilled, electrical and mechanical maintenance engineers to work across a large busy manufacturing site in the West Midlands.

Using your experience as a maintenance engineer you will perform planned preventative, reactive and proactive maintenance duties on a wide variety of manufacturing, production, automated and site equipment; and be rewarded with an industry leading package.

This role is site based locally in Shropshire / Staffordshire and does not require field service or travel so is ideal for an engineer looking for a great “work / life” balance alongside excellent earnings.

Working a very appealing and flexible shift pattern (including days only options), this exciting position offers all the benefits that come with working for an award winning and world-renowned manufacturing organisation which have manufacturing sites across the UK. Your focus will purely be on the West Midlands operation.

Candidate Requirements:
We are looking for experienced maintenance engineers, multiskilled engineers, site engineers, service engineers or similar mechanical or electrical engineers with a background in a role similar to that described above.

Candidates with any experience with PLC’s, automation or mechatronic equipment will be of great interest, so please make such experience clear in your CV.

Living locally in Shropshire / Staffordshire / West Midlands, you will ideally have supporting qualifications and be an excellent faultfinder, repair and maintenance engineer who enjoys a “right first time” and preventative approach to engineering maintenance.

If you are a maintenance engineer or similar skilled technician and are wanting a role that offers a great working environment, excellent earnings, an ideal working rota and some of the best career options on offer in the UK, apply now for an immediate interview.

How to apply:
Please forward your up-to-date CV to Joe at Birchley Consultancy Limited making sure to clearly highlight your most relevant experience and qualifications

An excellent opportunity has arisen for an experienced Refrigeration Service Engineer to join one of the countries leading Refrigeration Contractors around Bognor Regis.

This is a fantastic opportunity to join a leading company that offer a great salary / package as well as progression opportunities for the future.

The role of Refrigeration Service Engineer will involve traveling around the region attending sites to carry out reactive work on a range of commercial refrigeration plant including pack systems. The role is a mobile role so a full driving license is required.

The successful Refrigeration Service Engineer will be allocated sites within the region and will be responsible for all service and breakdown on their refrigeration plant. You will hold a current F-Gas certificate.

For the right engineer a fantastic salary / package is on offer comprising of the following:

Basic salary £51,000
Travel time paid
Overtime
Standby / Call Out - 1 in 4
Pension
Company Van
33 Days Holiday

This is a fantastic opportunity for an experienced engineer to join a company that value their engineers and offer a leading salary / package.

Relevant skills: Refrigeration, Fridge, Engineer, Technician, Supermarkets, Super Markets, pack system, hydrocarbon, CO2, F-Gas, British Refrigeration, Hydrofluorocarbon, HFC, Carbon dioxide, CO2, Supermarket refrigeration, Trans-critical cycle, refrigeration engineer, field service engineer

Refrigeration Engineer - Bognor Regis
Refrigeration Engineer - Engineering

Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Location: Knaresborough

Salary: £50,000 + Pension + Overtime

Days Monday - Friday 7:30-4:30pm.

Reference: Jo6989/SB

The Company

An excellent opportunity has arisen within a world leading manufacturer of interior systems to the automotive industry. The company has over 4,000 employees globally and have been established for over 150 years. They have grown based on its technological development and expertise, leading to a worldwide reputation for high quality products and services based on leading edge technology.

Key Skills

* Apprentice Trained Engineer in Electrical Engineering

* Experience of PLC systems & Automated machinery

* Understanding of PPM systems

The Role

You will have served a minimum of a full apprenticeship in electrical engineering and have experience in a controls role.

On a day to day basis you will be expected to support the maintenance team where required to assist with PLC fault finding to ensure maximum machine availability. Ensure accurate software backups are available & up to date for all PLC programs on site.

There is training and career development on offer, so the successful candidate will be in line to broaden their skills considerably.

If you are interested in this role, please send a copy of your current CV using the details provided, interviews will be held locally, and the company is looking to recruit this role as soon as possible.

ETS Consulting Ltd – Recruitment specialists with specific areas of expertise in the Manufacturing, Technical, Engineering and Sales markets.

ETS Consulting Limited act as an employment business and employment agency and are registered in England and Wales as ETS Consulting Limited, registered no (phone number removed). Registered office address 7 Stamford Square, Ashton Under Lyne, Lancashire, United Kingdom, OL6 6QU.

If one of our consultants contacts you in relation to this role, please be aware that as part of our registration process you will be required to provide ETS Consulting with proof of your identity along with proof of your eligibility to work in the United Kingdom

Are you an experienced engineer with a passion for ultra-precision technology and a love for international travel? Are you an experienced engineer with a passion for high-precision technology? A leading global manufacturer of ultra-precision polishing machines is looking for a Service Engineer to join their team. Their machines produce optical and non-optical components ranging from 5 mm to over 2 m in diameter, operating with advanced multi-axis CNC technology.

Responsibilities:

* Provide worldwide service support for a portfolio of cutting-edge machines

* Travel approximately 3–4 months per year, with trips ranging from a few days to 2–3 weeks

* When not traveling, work at the company’s UK headquarters, assisting in machine assembly and developing customer service practices

* Service tasks include: machine installation, preventative maintenance, breakdown response, calibration, and customer training

* Respond to machine breakdowns, often with short-notice travel

Key Skills & Experience:

* Experience with building or servicing CNC machines (3/5 axis) in areas such as lathe, milling, grinding, laser, diamond turning, EDM, ECM

* Knowledge of precision equipment (bearings, motors, linear scales/rails, linear motors)

* Understanding of machine geometry: alignment, straightness, and calibration

* Strong IT and reporting skills for service documentation, timesheets, and expense management

* Confidence in working directly with customers, maintaining professionalism and confidentiality

* Experience with Renishaw equipment (XM-60, XL80, Ballbar) is advantageous but training is provided

* Ability to manage travel and schedules independently

Interested? Click apply below

Our Clients are a dynamic and forward-thinking company dedicated to producing high-quality, natural food, drink, and beauty products. Our ethos is centred on sustainability, ethical sourcing, and avoiding unnecessary additives. We pride ourselves on using premium ingredients from around the globe to create products that are both delicious and environmentally responsible. Join our team and help ensure that our production processes run smoothly and efficiently.

Who this job would suit:
This role is ideal for someone with a strong background in engineering, particularly in mechanical, electrical, or pneumatic systems. It would suit an individual who enjoys problem-solving, has a keen eye for detail, and is eager to work in a hands-on, dynamic environment. You will thrive if you enjoy routine maintenance and are capable of diagnosing and repairing machinery faults. A willingness to learn and collaborate with the Engineering Manager is essential for success in this position.

Key Responsibilities:

Perform routine maintenance on production machinery and equipment.
Diagnose and repair faults to minimise downtime and ensure efficient operation.
Work alongside the Engineering Manager to coordinate planned maintenance activities.
Operate and maintain mechanical, electrical, electronic, and pneumatic systems.
Follow health and safety protocols to ensure a safe working environment.Benefits:

Competitive salary package.
Opportunity for training and professional development.
Monday to Friday 8.30am - 4.40pm, early finish on a Friday 3.40pm
Supportive and collaborative team environment.
Access to staff discounts on company products.Salary:

UPTO £45K per annumPlease give Sue a call on (phone number removed) / (phone number removed)

Role: Senior Multiskilled Installation & Commissioning Engineer

Location: London & Home Counties

Salary: £36,000 - £42,000 per annum

Team member benefits include;

* 9 day working fortnight

* Continuous professional development

* Wellness & Employee Assistance Programme (EAP)

* YuLife – The #1 rated benefits programme

* Death in service insurance

* Salary sacrifice pension scheme

* Quarterly one-to-one check-ins with your line manager

* 25 days’ holiday, plus Bank Holidays, increasing to 35 days (1 day extra per annum to 30 days and a further 5 days after 10 years)

* Paid door to door travel

* A company culture that promotes work life balance

* Access to mental health care support

* Team member of the month recognising outstanding contribution

* Annual company day to share successes and strategic plans

About the role

In line with the clients growth plan we are continuing to expand the installation team. This is a highly rewarding position, joining a strong and dedicated operations team providing a high level of job satisfaction.

The successful candidate must be self-motivated and able to organise themselves, as well as contributing to the operational team, whilst delivering the highest level of customer service to all clients. They should have the ability to carry out the installation as required of fire and or security systems.

Duties & Responsibilities

* Carry out installation and commissioning of electronic fire and or security systems

* Carry out maintenance and repairs if required

* To provide reliable, quality support to our customers at all times

* Have a flexible approach to working hours when required

Skills & Experience

* Must have a high level of experience of our industry

* Excellent technical knowledge of security systems

* Have a systematic/logical approach to tasks & problems

* Ensure all tasks are carried out quickly & efficiently

* Be aware of and responsible for the equipment required to complete the necessary works including emergency van stock.

* Understand the need for precise completion of paperwork records of jobs and full use of PDA device.

* Good customer service skills ability to motivate staff & colleagues and lead by example

Are you an experienced Multi skilled Site Engineer or Plant Service Engineer, looking to spend less time on the road and concentrate your efforts on one manufacturing site? Do you also have experience in fabrication and welding? This is a fantastic opportunity to develop your career with a world-class packaging business.

BASIC SALARY: £42,000 - £45,000

BENEFITS:
· Annual bonus, depending on Company Performance.
· Pension (3% Employer Contribution).
· 25 days annual leave (plus Bank Holidays).
· Free onsite parking.

LOCATION: Swansea

COMMUTABLE LOCATIONS: Neath, Cardiff, Bridgend, Newport, Llanelli, Port Talbot.

JOB DESCRIPTION: Multi-Skilled Site Engineer, Maintenance Engineer, Service Engineer - Packaging, Industrial, Manufacturing Plant

As our Multi-skilled Engineer, you’ll be responsible for providing maintenance, repair, and improvement activities working out of our busy manufacturing environment in Swansea 5 days per week, (7am - 4pm Mon - Thurs and 7am - 1pm Fri). The role involves performing both planned and unplanned maintenance to ensure machinery and equipment are maintained and operational, while supporting new developments and installations as required

KEY RESPONSIBILITIES: Multi-Skilled Site Engineer, Maintenance Engineer, Service Engineer - Packaging, Industrial, Manufacturing Plant

Your duties and responsibilities will include:
· Deliver mechanical and electrical fault finding, diagnosis, and repairs on relevant equipment.
· Prioritise and conduct all maintenance tasks.
· Implement and develop new processes to resolve faults and prevent repeat issues.
· Ensure all machines, processes, and operations meet required standards.
· Assist other teams (internal or contracted) on breakdowns, where appropriate.
· Perform robust Planned Preventative Maintenance (PPM) and Total Productive Maintenance (TPM) on all machines throughout our plant.
· Assist contractors with ongoing projects and tasks as directed.
· Adhere to health and safety regulations, ensuring a safe working environment.
· Perform general machining and fabrication.
· Liaise with contractors, suppliers and external support where required.
· Maintain a clean, safe and organised work area at all times.

PERSON SPECIFICATION: Multi-Skilled Site Engineer, Maintenance Engineer, Service Engineer - Packaging, Industrial, Manufacturing Plant

You will have the following qualifications:

· An Electrical and Mechanical Engineering background.
· Experience maintaining & repairing a range of manufacturing equipment.
· Recognised qualification in Mechanical / Electrical Engineering (HNC/D, BTEC, City & Guilds or equivalent)
· Previous experience of a similar maintenance role, ideally in a FMCG industry (or similar).
· Experience of fault-finding and repairs, for electrical and mechanical systems.
· Strong fabrication skills.
· Knowledge of health and safety standards.
· Beneficial but not essential: FLT Licence & MEWP Licence.
· All round team (and independent) working skills, backed with a quality ethos and excellent attention to detail.

OUR COMPANY:

With the backing of one of the Far East’s largest packaging companies, we deliver high quality and service-oriented packaging to the global market. We are a part of a global network with more than 170 locations in over 20 countries worldwide. Globally, we are traditionally known for heavy duty packaging solutions but in the UK and Europe, we also specialise in conventional corrugated, timber, plastics, foams and steel.

PROSPECTS:

This is an opportunity to join a very large multinational organisation who have an active policy of promotion from within and offer the genuine opportunity to develop your career. This position will be challenging but also tremendously rewarding. Coaching, mentoring and training are an integral part of our culture.

It is highly likely you will have worked in any of the following roles and/or markets, and worked with the following products and/or services: Multi-Skilled Site Engineer, Site Engineer, Service Engineer - Electrical Engineer, Maintenance Engineer, Mechatronic Engineer - Packaging, Industrial, Manufacturing Plant, Corrugated Packaging, Heavy Duty Packaging, Pallets, Packaging Solutions, Flexible packaging, Carton Packaging.

INTERESTED? Please click apply. You will receive an acknowledgment of your application.

Wallace Hind Selection, alongside our client embrace diversity, champion equality, and foster inclusion to create a work environment where everyone belongs and thrives.

Please Note: Wallace Hind Selection have been chosen as the retained recruitment partner of our client and therefore any direct applications to our client from candidates or agencies will be forwarded on to us direct.

REF: JK18374, Wallace Hind Selection

Location: Coulman Road, Thorne, Doncaster, South Yorkshire

Salary: Up to £22 per hour

Hours: Rotating Shifts Monday to Friday (Shifts usually from 5am, 9 hours with an hour paid for lunch. Rotating shift with 2pm until 9 hours for the back shift. One week of earlies rotating with one week of lates)

The Engineer is responsible for delivering effective engineering repair, maintenance, and reliability activities across the site. Working as part of the engineering team, the role ensures machinery and equipment operate safely and efficiently through reactive, corrective, and planned preventative maintenance. The Engineer supports operational performance, contributes to continuous improvement, and maintains high standards of safety, communication, and housekeeping.

Duties:

Engineering Maintenance & Repairs

Carry out engineering repairs, corrective maintenance, and planned preventative maintenance (PPM) across the site.
Complete tasks generated from audits, work requests, and PPM follow-ups.
Ensure machinery and equipment meet site standards, escalating issues where necessary.
Workload & Shift Management

Manage personal workload and complete scheduled tasks to required standards.
Ensure effective handover of outstanding work between shifts.
Maintain excellent housekeeping across all engineering work areas.
Safety & Compliance

Apply Health & Safety and Food Safety standards to all work undertaken.
Manage the Health & Safety compliance of external contractors, ensuring work areas are left clean and safe.
Support environmental compliance requirements.
Team & Communication

Support colleagues within the team and contribute to achieving KPIs and performance targets.
Communicate effectively with management and other departments regarding breakdowns and engineering activities.
Challenge issues constructively and professionally.
Stock & Equipment Management

Control and manage spare parts ordering to ensure effective stock levels.
Maintain accurate records and uphold site standards for engineering assets.
Qualifications / Experience:

Completion of a 4-year approved technical training programme.
Minimum NVQ Level 3 or equivalent in mechanical/electrical repair and maintenance.
Alternatively, a suitable combination of apprenticeship/education and experience that provides equivalent skills and knowledge.
At least 5 years’ experience in a similar engineering role.
Experience within a fast-paced manufacturing environment.
Food manufacturing experience is advantageous but not essential.
Core Competencies:

Technical Proficiency
Problem Solving & Decision Making
Safety & Compliance Focus
Teamwork & Collaboration
Communication Skills
Organisational & Time Management Skills
Accountability & Ownership
Adaptability & Resilience
Attention to Detail
To Apply

If you feel you are a suitable candidate and would like to work for Chesterfield Poultry, please don’t hesitate to apply

Job role: Baler & Compactor Engineer

£60,000 - Overtime + Van - Fuel Card

Paid Travel - Door 2 Door

Shift: Monday - Friday - DAYS

We have partnered with a leading innovator in machinery used in manufacturing, packaging, warehouse environments, who due to continued success are looking to recruit a Baler & Compactor Engineer.

The successful applicant will complete scheduled maintenance, attend breakdowns, assist with installations and provide technical support.

The main responsibilities of the Baler & Compactor Engineer will include.

* Maintenance of balers, compactors, recycling shredders.and associated machinery

* Ensuring plant equipment functioning in the correct manner.

* Maintaining all equipment on site, such as pumps, motors, gearboxes, and valves.

* Hydraulic and pneumatic repairs

* Installation of machinery onsite.

* Maintaining all mechanical and electrical process equipment.

* Fault finding and diagnostics.

* Following a PPM schedule and recording follow up work.

* Ensuring appropriate housekeeping standards are maintained on a daily basis.

* Continually developing to improve operations to drive improvements in quality, cost and safety.

* Assisting production with machinery problems and setups, providing relevant training when appropriate.

* Responsible for the protecting, always, of the integrity of the Company through positive and constructive actions and attitude.

If you are interested in this Baler & Compactor Engineer role, please submit an up-to-date CV through this advert