Role: Electrical Maintenance Engineer / Maintenance Electrician
Salary: £49,000 per annum plus overtime
Hours: 4 on 4 off 2 Days followed by 2 Nights
Location: Brough - Commutable from Howden, Hull, Selby, Goole, Doncaster, Brough, York, Market Weighton, Driffield, Knottingley and surrounding areas

Thisglobal heavy plant manufacturing company offer genuinely challenging and rewarding careers for their Engineers and they are currently looking for an Electrical Maintenance Engineer / Maintenance Electrician who wants to be part of an established, loyal and successful team.

If youre after a role where you will have opportunities to develop your electrical skills and progress, coupled with getting involved in a range of work from reactive repairs and PPM to undertaking installations & improvement projects, then this job is for you!

The site prides themselves on being self-sufficient, not relying on outside contractors for most projects, so the maintenance teams get fully involved in most of the full Lifecyle of work. They also provide training and up-skilling where required ie. FANUC Robotics and programming or PLCs - both fault finding and programming, although ideally you will have some of these advanced skills already.

This is a Shift based role - 4 on 4 off - 2 Days followed by 2 Nights and would ideally suit an Electrical Maintenance Engineer / Maintenance Electrician with a background in an industrial or heavy manufacturing environment - the ability to work effectively within a skilled team is essential!

Responsibilities

Your role will be to focus on Electrical Maintenance and Engineering work in the factory, including:

• Supporting a wide range of heavy equipment and machinery including conveyors, mixing and robotics machinery.
• Working through a planned preventative maintenance program as well as project and continuous improvement work.
• Providing reactive maintenance, attending to and resolving breakdowns swiftly and getting production lines back up and running again.
• Dealing with VSD Drives and PLCs.

Requirements

• The Engineer will need to have completed a recognised Electrical Engineering Apprenticeship or hold Electrical Engineering qualifications at Level 3 or above.
• Are experienced in performing reactive & PPM Electrical maintenance work within an industrial and/or heavy manufacturing environment.
• Will have experience of PLC Fault Finding, PLC programming skills are useful, additionally experience with VSD Drives is beneficial.
• Siemens PLC experience extremely desirable
• Can diagnose and repair Electrical Motors and Pneumatics.
• Are open to & willing to learn and develop your skills further, together with sharing your knowledge and experience with the team.
• A friendly, proactive and adaptable attitude to work is essential.
• Good knowledge of and strict adherence to Health & Safety.

If this role sounds of interest, please apply now and send your most up to date CV to Jane at TechNichols Resourcing to be considered. Or call TechNichols Resourcing and speak with Jane for further information.

We will endeavour to get back to all applicants but if you have not heard back within 5 working days unfortunately your application has been unsuccessful.

Job Title - Field Service Engineer

Location - Bromyard (Can live in WR/HR postcode)

Salary: £30,000 - £37,000 (40 Hours) or £36,000 - £42,500 (45 Hours)

Shift: Monday to Friday - 40 Hour or 45 Hour Week available

Job Role:

I am currently partnering with a market leading materials handling business that are currently looking to recruit an experienced field service engineer to service and maintain Forklift Trucks and other MHE equipment across customer sites.

As a Field Service Engineer, you’ll cover your local patch carrying out diagnostics, repairs, and servicing of FLT and material handling equipment. You’ll have the freedom to plan your own day while enjoying the backing of a strong technical team and ongoing manufacturer training.

Sector - Field Service Maintenance

Non-Negotiable Requirements of Field Service Engineer:

• Must have hands on Servicing or Maintenance Experience

Essential requirements of Field Service Engineer:

• Maintenance experience of Forklift Trucks or Mobile Plant Machinery or HGV’s or industrial Vehicles.
• Have hands-on experience in the following disciplines: Electrical, Mechanical and Hydraulics.
• Recognised Engineering Qualification.
• Full UK Driving License

Desirable Requirements of Field Service Engineer:

• Previously have worked as a Field Service Engineer.
• Minimum Level 3 Qualification in Engineering.

The Field Service Engineer will benefit from:

• Full Training and Induction Scheme
• Company van & fuel card.
• Regular overtime available with Door to Door pay.
• Company Pension Scheme
• Tools provided

If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.

For further details contact Will Downes at Pioneer Selection

As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Title: Fire Extinguisher Engineer

Fire Extinguisher Engineer Benefits

• Basic salary: £32,500
• OTE: £39,000+
• Joining bonus: £1,500 total (£750 at 6 months, £750 at 12 months)
• Travel Time: After 30 minutes each way
• Vehicle: Company van and fuel card provided
• Holiday Entitlement: 22 days’ holiday + 8 bank holidays
• Pension scheme
• PDA / Uniform / Tools provided

Role: Fire Extinguisher Engineer Responsibilities

As a Fire Extinguisher Engineer, your duties will include:

• Servicing, maintaining and installing portable fire extinguishers in commercial and residential environments
• Planning and managing your own daily service routes
• Liaising with customers to arrange service appointments
• Ensuring accurate completion of reports via PDA
• Maintaining compliance with fire safety regulations and health & safety standards
• Working independently and professionally, representing the company brand in the field

Fire Extinguisher Engineer Requirements:

• BAFE Certification – Essential
• Full UK Driving Licence – Essential
• Previous experience as a Fire Extinguisher Technician or Fire Extinguisher Engineer
• Experience in customer-facing roles
• Ability to work remotely and manage your own workload

Why Apply?

• Secure a long-term role with a respected leader in fire protection
• Join a growing team with structured training and development
• Benefit from full support and modern tools (PDA, vehicle, uniform)
• Realistic OTE and performance incentives

Apply Now!
If you’re an experienced Fire Extinguisher Engineer looking for a fresh opportunity with great benefits, supportive management, and long-term prospects - apply today!

Keywords to help your application:

• Fire Extinguisher Engineer | BAFE Engineer | Fire Safety Technician | Fire Protection Engineer | Fire Risk | Fire Door Inspection | Fire and Security Engineer | Mobile Fire Engineer | Field-Based Fire Extinguisher Engineer

Service Engineer / Field Service Technician / Compressor Engineer required to join a global, market leading engineering manufacturer.

The Successful Service Engineer / Field Service Technician / Compressor Engineer will provide electrical and mechanical repair, service and maintenance on compressed air equipment at customer sites across Sussex and Kent. Full product training provided.

The Service Engineer / Field Service Technician / Compressor Engineer will ideally have a field service background inelectrical or mechanical engineering such as compressors, filtration, HVAC, industrial regrigeration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, valves, pumps, motors, rotating equipment,hydraulics, pneumatics, robotics and / or electro mechanical engineering equipment.

Package

• £30,000-£40,000 depending on experience
• Company van - door to door pay
• Company phone and laptop
• 25 days holiday + bank holidays
• Company pension + shares scheme
• Overtime
• Additional benefits

Service Engineer / Field Service Technician / Compressor Engineer Role

• To provide electrical and mechanical repair, service and maintenance of compressed air equipment at customer sites acrossSussex and Kent.
• The Compressor Service Engineer will undertake planned and preventative maintenance, provide advice, diagnostics, fault finding of compressed air systems, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air products.
• Maintain, repair and install air compressors, vacuum pumps, blowers & dryers, nitrogen generators and other compressed air and pneumatic equipment across Sussex and Kent areas.
• Installing compressed air/water & nitrogen pipelines into all forms of the manufacturing industry.
• Perform emergency breakdown fault finding and repairs on various compressed air equipment.
• Commute to the office near Crawley occasionally for parts collection and training.
• Liaise with various engineering departments.

Service Engineer / Field Service Technician / Compressor Engineer Requirements

• Proven diagnostic skills on complicated electrical / mechanical engineering systems.
• Experience as a Field Service Engineer / Service Engineer / Service Technician / Installation Engineer / Compressor Engineer / Mechanical Engineer / M&E Engineer or similar.
• The ability in maintaining good professional working relationships with existing and new customers.
• Field servicing background in compressors, filtration, pneumatics, hydraulics, nitrogen generators, pipework, vacuum pumps, vacuum systems, HVAC, industrial regrigeration,valves, pumps. motors, rotating equipment, hydraulics, pneumatics, robotics, capital equipment and / or electro mechanical engineering equipment. Full product training provided.
• Good working knowledge of three phase electrics and controls is advantageous.
• A technical engineering degree / qualification or apprentice trained, FGas would be advantageous.
• Willingness to travel and commute to Crawley occasionally to collect parts etc.

Youll always be motivated with performance bonuses that reflect your impact. The better you do, the better we do."
With a hybrid setup giving you four days in the office and one at home, youll have flexibility without sacrificing collaboration.
And with a structured skills matrix, you can plot your progression, close development gaps and work towards chartered status.
The matrix covers 15 categories, giving you the exposure and experience needed to keep moving forward. Youll work across a variety of sectors, from commercial and education to MOD and retail, so youll never be stuck doing the same thing twice.
Youll also get a car allowance, a solid pension and a good holiday allocation to support your lifestyle.
What youll do
You’ll design electrical systems for buildings, covering everything from small power and lighting to fire alarms and security systems.
Using Amtech and AutoCAD, youll produce detailed designs, specifications and working drawings. Youll also head to site to survey, write technical reports and monitor progress, giving you hands-on experience that few positions offer.
Meeting with clients and contractors, youll shape projects from start to finish, building your influence and visibility in the industry.
What youll need
At least 5 years experience in electrical building services designConsultancy experience, so youre familiar with client-facing workProficiency in Amtech and AutoCAD, as these will be your main toolsAbout the company
This consultancy has a proven track record of over 75 years and a strong management team that helps engineers grow. They work across multiple sectors, giving you the chance to build a diverse portfolio.
Please click the Apply button. Dont worry if your CV isnt up to date. Just send what you have and well deal with that later.

Come to a place where job satisfaction is as important as productivity."

With hybrid and agile working standard for all employees a relaxed atmosphere exists based on maturity.

Withstate of the art offices to work from and very diverse projects to work its easy to see why staff turnover is so low.

Engineers feel energised by the work and rewards but don’t miss out on their work/life balance.

What will you be doing:

Electrical design for building services solutions

Writing specifications, producing drawings and liaising closely with the Cad/REVIT teams.

You’ll also get the chance to work on performance specifications,surveys, reports and act as a clients representative.

What you’ll need:

• Demonstrable experience within a similar or relevant working environment atintermediate grade or above.
• Competency with the market leading software required to produce and validate design outputs.
• A genuine interest and enthusiasm forthe built environment.

The company

A well known name in the industry, our client has been involved with numerous landmark schemes inManchester and Liverpool city centres. A very well run company with excellent core values and beliefs.

Projects

Very varied including low carbon consultancy schemes, education, emergency services, residential and civic buildings.

Want to see your designs come to life? Here you would work on projects from start to finish through all construction phases.

Wish you could work on MEP led schemes?This firm are appointed by end user clients on a variety of projects. This means that you can work in a collaborative environment supporting the client rather than getting micro managed by contractors.

Like the idea of flexible working? Once you have proved your ability you will be free to work in the office, from home or mix it up as you please,

Overview:

• Senior electrical design engineer
• Independent building services consultancy
• Very strong client base with varied workload across different sectors
• Clients are often end users in Healthcare, manufacturing and aerospace
• Strong BIM capability

Our client is a well known local consultant who has been operating in the region for the last 20years.

What you’ll be doing:

They are looking for a senior design engineer who isself-sufficient, can run projects from start to finish and can help out the management team.

Projects:

Their workload is extremely varied often with end user clientsincluding the NHS, a furniture retailer, local football clubs and colleges amongst others.

Duties:

They are involved in survey work, detailed design, clerk of works, employers agent, feasibility studies, modelling and design management.

Why apply?

Excellent working environment

Very strong local client base

Very low staff turnover

Flat management structure

Very strong team of ten technical staff

About The Role
Engineered to Protect, thats our promise, we protect what matters - our nations, our waters, our land, our cities, our people, our environment, our world.You will take responsibility for the design, development and support of our products. You will be required to progress the design, development, design proving, test, commissioning and in-service support of the equipment.
Senior Systems Engineer will be based at our Barnstaple site. This role allows for flexible working.
The salary for this role is up to £65k, depending on experience.

Whatyoullbedoing

• Defining and Managing Requirements throughout the Engineering Lifecycle
• Proving Technical inputs to bidding activities
• Integration and production qualification activities
• Product Trialing and Testing Activities
• Work Package generation and execution

About our company
At SEA, we develop and deliver advanced solutions to make our world safer, cleaner and more efficient.
We provide state-of-the-art applications for naval ship and fleet protection, and undersea surveillance systems. In-service across the globe, our systems deliver a rapid response to threats and system effectiveness and interoperation. Our systems support an ever-growing number of navies across the world, and we continue to bolster our already specialist, on-the-ground knowledge of key overseas markets.

What we offer
At our core, we encourage innovation, flexibility and out-of-the-box thinking to solve problems, so were always looking for talented, flexible, and creative people to bring their best to SEA. In return we offer generous rewards, a fantastic work/life balance, and excellent career and training opportunities for everyone who joins. Havea look atthe benefits we offer:

Work life balance

• Hybrid/flexible working arrangements
• 25 days annual leave, plus buy and sell
• Up to 16 days flexi leave accrual
• Half day Fridays
• Reservists in theArmedForces receive special paid leave

Family & wellbeing

• Private medical health insurance & Employee Assistance Program
• All Staff Bonus
• Group Pension Plan of up to 7% employer contribution
• Cycle to work scheme
• Wellbeing Centre
• Sports & Social activities
• Employee Discounts portal - online and in-store discounts, travel savings
• Life assurance policy
• Publication and recruitment bonus rewards
• Development opportunities, including LinkedIn learning

Facilities & resources

• Electric vehicle charging points at all sites
• Private seated lunch areas
• Onsite bistro (Barnstaple office) and free hot and cold beverages
• Onsite showers and toiletries provision
• Free onsite parking

Theskills you need

• Degree, HND or equivalent in a relevant engineering discipline
• Extensive Knowledge and experience of working within the Engineering Lifecycle as a Systems Engineer
• A good understanding of requirements capture and experience of using a requirements management tool to manage requirements
• Excellent Communication skills
• Knowledge and understanding of using MBSE
• Leadership and team leading
• Experience of Sonar or the Underwater Battlespace environment

Join us and be part of something smaller - with500people in the UK and Canada - doing something bigger: protecting what matters.
If youd like to know more, please give Kelly Thomas from our Talent Acquisition Team a call on 03330 414300. Or reach out to us on

Have you designed control panels primarily focused on PLC’s, MCCs, Drives & Controls, or Switchgear?
Do you enjoy a hybrid and flexible way of working?
Would you like to be a part of a world-class team?

Then this might be a great opportunity for you!

What’s in it for you?
£50k to £60k basic salary
25 days annual leave plus 8 bank holidays, plus buy/sell up to 5 days leave per year
Hybrid working - 2 days from home per week
Flexible start and finish Times - Start between 7-10am and finish between 3-6pm, plus Flexi Fridays
Pension contributions are 4.5% employer, subject to a 5% contribution by the employee
Employee Health Cash Plan
Life assurance
Professional Membership Fees paid for

What will you be doing?
As part of the role, you will design electrical and control systems focused on PLC based control panels but including cabling, MCCs, Drives & Controls, Switchgear and related EC & I equipment within the energy sector. You will be involved in site surveys, electrical engineering solutions for cabling, control panel designs, as well as the preparation, review and checking of necessary calculations and designs.

Where will you be doing it?
Our client has been a leader in advanced system integration for decades, they work on ambitious and leading-edge projects for some of the UK’s most critical environments.

What will you need?
You’ll need at least 3 years of hardware development experience in a project environment with a proven track record of delivering successful systems

We appreciate your CV may not be up to date. No problem, just apply and we can deal with that later.

Important Information: We endeavour to process your personal data in a fair and transparent manner. In applying for this role, Russell Taylor will be acting within your interest and will contact you in relation to the role, either by email, phone or text message. For more information see our Privacy Policy on our website. It is important you are aware of your individual rights and the provisions the company has put in place to protect your data. If you would like further information on the policy or GDPR please get in touch with us here.*

Job Title: Senior Safety Case Engineer
Location: Warrington, Leicester, Bristol, Newbury + Hybrid Working
Type: Full Time, Permanent
Salary: Competitive + Benefits

Were looking for a permanent Senior Safety Case Engineer to join our growing team, supporting key nuclear projects in Warrington, Leicester, Bristol, Newbury. You’ll play a vital role in delivering high-quality safety case work across various programmes.

Key Responsibilities:

Develop hazard management strategies and support HAZID/HAZOP studies

Write and review safety assessments and safety case documentation

Produce and check technical calculations and reports

Manage delivery of work packages, including supplier activities and cost control

Share technical best practices across projects

What we’re looking for:

Degree-qualified in engineering or related discipline

Chartered Engineer or actively working towards it

Strong experience in nuclear safety case development

Excellent communication and stakeholder management skills

Security Clearance:
Must be eligible for SC (Security Check) clearance.

Interested? Apply now for a full job spec and help shape the future of nuclear safety in the UK.

Job Title: Senior Electrical Design Engineer Building Services Job reference Number: 280978-2732-25324 Sector: Electronics Engineer, Electrical Engineering,Building Services, Electrical Engineer. Electrics, CAD, Electrical Design EngineerAutoCAD, Revit MEP, BIM Coordination, Amtech, Trimble, Mechanical-Electrical Integration. Plant Room Coordination, Utility Systems, Building Services Location: Blackpool Remuneration: £40,000 £50,000 annual bonus Benefits: employer pension contribution 4%, 23 days annual leave, company car, health benefits, DIS The role of the Senior Electrical Design Engineer Building Services will involve: Electrical Engineer position leading the design and development of electrical systems for RIBA Stage 4-5 construction projects. Oversee and review technical drawings, specifications, and calculations. Collaborate with MEP, architectural, and structural teams to integrate electrical systems effectively. Have technical oversight of junior engineers and support their professional development. Engage with clients, contractors, and stakeholders to ensure project success. Contribute to sustainability and energy efficiency strategies within electrical designs Working on M&E projects with values ranging from £1m to £15m The ideal applicant will Senior Electrical Design Engineer Building Services with: Must have a Degree in Electrical Engineering Must have experience in electrical design within the building services sector Ideally Professional Registration with IET or similar body (Incorporated Engineer or Chartered Engineer status preferred) Strong knowledge of HV/LV distribution, lighting, fire alarm, power, and containment systems. Understanding of AutoCAD/Revit, AMTECH (Trimble) High levels of organisation and attention to detail IT Literate Mitchell Maguire is a specialist construction recruitment consultancy, dealing exclusively with construction jobs, construction vacancies and specification positions within: Electronics Engineer, Electrical Engineering,Building Services, Electrical Engineer. Electrics, CAD, Electrical Design Engineer AutoCAD, Revit MEP, BIM Coordination, Amtech, Trimble, Mechanical-Electrical Integration. Plant Room Coordination, Utility Systems, Building Services

Position: Electrical Project Engineer

Location: Bristol

Salary: £60,000 - £70,000 DOE

My client is a leading Engineering Service Provider managing high-profile contracts within the FMCG sector across the UK. They are seeking a Electrical Project Engineer to take ownership of complex, multi-site projects. This is a high-impact role for a technically exceptional individual with strong commercial acumen, leadership skills, and proven expertise in delivering electrical projects to the highest standards. The successful candidate will combine advanced technical knowledge with strategic oversight, guiding projects from inception to completion, managing teams and subcontractors, and maintaining exceptional client relationships.

Mechanical Project Engineer Job Overview

• Lead the full lifecycle of commercial electrical projects, ensuring delivery on time, within budget, and to the highest quality standards.
• Prepare comprehensive project quotes, balancing materials, labour, and resource requirements while identifying opportunities for efficiency and cost optimisation.
• Design, configure, and optimise control system architecture, including PLC, HMI, and SCADA software (Siemens or Allen Bradley).
• Oversee the installation, commissioning, and troubleshooting of control panels and electrical systems.
• Mentor and supervise engineering teams and subcontractors, fostering high-performance and accountability on site.
• Drive continuous improvement initiatives and ensure all projects comply with relevant health and safety standards.
• Manage project budgets, schedules, and resources with strategic oversight, liaising closely with clients and stakeholders

Mechanical Project Engineer Job Requirements

• Degree, HND, or HNC in Electrical Engineering (or equivalent)
• Extensive experience in control panel design, electrical installation, and commissioning
• Strong commercial project management experience
• Proven experience with PLC software development (Siemens or Allen Bradley)
• Experience with FMCG / Pharmaceutical production environments
• IOSH / NEBOSH qualified would be beneficial
• Excellent leadership, communication, and stakeholder management skills
• Full UK driving licence and the preparedness to travel as required

Mechanical Project Engineer Salary & Benefits

• £60,000 - £70,000 depending on experience
• Mileage paid
• 28 Days holiday inclusive of Bank holidays
• Mon - Fri: 08:00 - 17:00
• Pension

Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy.

Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.

We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.

We have an exciting opportunity for a Workshop Engineer based in Biggleswade for one of our clients on a full time permanent basis.

Summary of theWorkshop Engineerrole

Salary: £16.56 - £19.16 per hour D.O.E.
Location: Biggleswade
Type of Contract:Permanent, Full time
Hours: 40 hour working week Monday Friday
The role

As the Workshop Engineeryourrole will involve the following important duties:

• Carry out effective maintenance and repair work.
• Carry out routine pre-delivery inspections of new machines.
• Fit extras to machines where required - both factories approved and locally supplied.
• Perform all forms of repair and servicing to machines.
• Complete repair, overhaul and diagnosis of plant equipment.
• Maintaining clear communication with the Workshop Supervisor.
• Support and mentor engineering apprentices.

The experience required

As a successful Workshop Engineer,you will have the following:

• Full clean driving licence.
• Completion of a recognised apprenticeship in a related industry to NVQ level 3 or above.
• Demonstratable service Engineer experience particularly working on major component overhaul refurbishments.
• Industry-related training such as CSCS card.
• Previous experience with service software and interfaces.
• Good communication skills.

The benefits

The business offers Counselling/employee wellbeing support, company pension, free fruit, flexible working hours, participation in external sports events e.g. race events, health programmes, management development/training, company sports teams, discount on company products.

About Allstaff Recruitment
Were an independent recruitment specialist based in Bedfordshire, supporting businesses across Bedford, Milton Keynes, and surrounding areas. We recruit for permanent, temporary, and contract roles across multiple sectors.

**Thank you for your interest in this role. One of our Recruitment Specialists will review your application shortly. Due to the high volume of applications, we regret that we cant respond to everyone directly. If you dont hear from us within seven days, please assume you have not been successful this time.**

Job Description

Electrical Estimator & Project Manager
Banbury
Permanent, full-time
Competitive salary plus benefits and company car

The Electrical Estimator & Project manager is required to undertake all duties associated with the preparatory tasks in relation to service delivery, namely surveys, preparing and submission of quotations, supervision of works teams and other associated tasks. When working as a project manager, you will be required to oversee & ensure the delivery of various contracts involving electrical systems maintenance and repair.

More about the role:

• Undertaking full and concise site surveys, preparing and submitting accurate works quotations and job engineering.
• Supervising specialist subcontractors to ensure service provided is as per service level agreement; reporting any issues supervision immediately and contribution to problem resolution.
• Supervise all Adler and Allan personnel on site whilst works are being undertaken; ensuring all personnel are provided with a full brief of works and ensuring service delivered in of a high standard.
• Preparation of RAMS to a high standard and fully compliant with relevant legislation.
• Provide accurate weekly sales KPIs to management in a timely and efficient manner.

Additional key tasks & accountabilities when acting as Project Manager:

• Manage teams of Engineers to ensure work is carried out on time and safely
• Liaise with Service Engineers and subcontractors and carry out site audits as and when required to ensure work is being undertaken to a high standard
• Overseeing & quoting any variations.
• Ensure stringent KPIs are followed and complied with and reported back to the customer in a timely fashion.
• Communicate with customers and attend face to face meetings as and when required.
• Ensure installation handover documentation is produced and passed to clients on time
• Provide management with a weekly report relating to project progress. The report should detail specific information relating to the operational and financial aspects of a project.

Qualifications

About you:

Are you a qualified Electrician?

Do you have experience in speaking to customers face to face?

Are you looking for a position where you can make a difference to the environment?

This position carries a high level of responsibility and as such you must demonstrate a continued commercial and operational awareness whilst promoting the success of the division and Company.

About us:

At Adler and Allan Group, we’re not just a company - we’re environmental champions committed to protecting our planet while helping businesses thrive. We’re a diverse, dynamic team dedicated to providing top-tier environmental, energy and water infrastructure services across the UK. Our mission is clear: safeguarding the environment, minimising operational disruptions, and supporting sustainability goals for our valued clients.

Additional Information

Adler and Allan are committed to fostering diversity and inclusion in our workplace. We proudly embrace equal opportunities for all applicants, regardless of race, colour, religion, sex, sexual orientation, gender identity or national origin. If you require any support with your application, whatever the circumstance, please let us know.

Job Description

Installation Engineer
Midlands & South Yorkshire area (Flexible)
Full time/permanent
Competitive salary plus enhanced overtime

Pollution doesn’t wait… and neither do we.

At Adler & Allan, our Environmental Protection Solutions team is on the front line, designing and delivering smart, engineered systems that stop environmental disasters before they happen.

We are looking for a skilled Installation Engineer to take projects from the first survey to the final sign-off - making sure every system works flawlessly and meets the highest compliance standards.

You’ll be doing things like…

• Cutting-Edge Environmental Solutions - Join a team at the forefront of environmental protection, working on innovative engineering installs that make a tangible impact on sustainability and environmental safety.
• Varied Engineering Projects -Tackle electrical, mechanical, automation, and SCADA systems-continuous learning in a dynamic environment.
• End-to-End Project Delivery - Manage site surveys, design with CAD and PLC (training can be facilitated), pre-assemble control panels, install, and commission with precision.
• R&D Innovation - Contribute to ground-breaking telemetry, remote monitoring, and patented environmental tech, such as autonomous electromechanical valve designs.
• System Installation & Auditing - Install automated systems to protect the environment and conduct audits for system improvements and repairs.
• Collaborative Environment - Work with engineers, contractors, and clients-travel and remote deployments included. Close supplier collaboration ensures smooth installs.
• Grow Your Career - Lead high-quality projects from the ground, gain professional qualifications, and thrive in a fast-growing, tech-driven sector.

Qualifications

You’ll fit right in if you have…

• Electrical qualifications (Level 3 NVQ C&G or equivalent).
• Experience delivering engineering installs in environmental or industrial settings.
• A hands-on engineering approach with proven installation jobs under your belt.
• Knowledge of standards like BS EN 858-2:2003 and BS 7671 - 18th Edition.
• Strong organisational skills and problem-solving flair.
• Knowledge of industry standards and best practice.
• A full UK driving licence and willingness to travel.

Additional Information

Adler and Allan are committed to fostering diversity and inclusion in our workplace. We proudly embrace equal opportunities for all applicants, regardless of race, colour, religion, sex, sexual orientation, gender identity or national origin. If you require any support with your application, whatever the circumstance, please let us know.

Job title: EC&I Engineer

Location: Royston, Hertfordshire, UK (Site based role)

World-changing careers, enabled by Johnson Matthey. With more than 200 years history, join us and help to accelerate the transition to net-zero! As an EC&I Engineer, you’ll contribute to JM’s mission as a world leader in sustainable technology, transforming energy and reducing carbon emissions for a cleaner, brighter future.

Reporting into the Senior Electrical Engineer within the Royston Engineering team, the EC&I Engineer is responsible for providing second level technical support and expertise across a diverse range of industrial equipment. The role will drive implementation the delivery of EC&I improvement plans to ensure business needs both now and in the future are met.

The role:

As an EC&I Engineer, you will help drive our goals by:

• Ensures programmes are in place to manage compliance inspections across EC&I equipment on site (ATEX, Functional
  Safety, Gas Detection, Fire Alarms, Environmental Analysers, Fire Suppression, Test Equipment calibration etc).
• Provide second level technical support to the Maintenance shift teams to assist root cause analysis of complex plant EC&I breakdowns.
• Ownership of EC&I maintenance plans ensuring industry best practice is embedded across the plant.
• Ensure instrument loop calibrations are completed to satisfy ISO9001 and 14001 requirements.
• Working with the Senior Electrical Engineer, ensure contingency plans are in place to support site controls systems and instrumentation as well as the power distribution to meet the business/operational needs.
• Lead root cause analysis (RCA) of complex breakdowns of plant issues.

Key skills that will help you succeed in this role:

• Minimum 3 years’ experience in a similar role
• Experience managing maintenance of industrial EC&I equipment within a similar industry (chemical,
  pharma, food etc)
• Good understanding of maintenance techniques and their application
• Knowledge of applicable international standards (e.g., IEC 60079, IEC 61511)
• Experience working in a regulated environment (e.g., COMAH, Chemical, Oil & Gas etc.) is not essential but highly desirable

Even if you only match some of the skills, we’d love to hear from you to discuss further!

What we offer:

We make sure salaries are fair, competitive and aligned to individual roles, experience and responsibilities. We are also supportive of hybrid and flexible working and where applicable, offer life, medical and other benefits that support our employees’ financial and physical wellbeing, such as:

• Retirement savings
• Share plans
• Saving accounts
• House saving funds
• Life and disability insurance
• Commuter allowances and loans
• Medical plans / health assessments
• Fitness discounts

Ready to make a meaningful impact on your career and the environment? Join us and help shape a sustainable future while advancing your career!

At JM, inclusivity is central to our values. We create an environment where everyone can thrive, embracing diverse perspectives to tackle challenges and ensure all colleagues feel valued and connected.

For any queries or accessibility requirements, please contact . We will work with you to make suitable adjustments at any stage of the recruitment process. All conversations are confidential, and your feedback is welcome to help us provide an accessible and positive recruitment experience.

Closing date for applications: This job advertisement will be posted for a minimum of 2 weeks, early application is advised.

#LI-AG1
#LI-Onsite
#CVL
#JMUK

To submit your application, please click the “Apply” button online.

All applications are carefully considered and your details will be stored on our secure Application Management System. This is used throughout Johnson Matthey for the selection of suitable candidates for our vacancies as they arise.Johnson Matthey respects your privacy and is committed to protecting your personal information.

For more information about how your personal data is used please view our privacy notice: Johnson Matthey Privacy Notice . By applying for this role and creating an account you are agreeing to the notice.

Johnson Matthey Plc is an equal opportunities employer and positively encourages applications from suitably qualified and eligible candidates regardless of sex, race, disability, age, sexual orientation, marriage or civil partnership, pregnancy or maternity, religion or belief.

Maintenance Engineer- 12 hr Continentals (2 days/2 nights, 4 off) A recognised high volume manufacturer are currently looking to strengthen their Maintenancedepartment with the appointment of a Maintenance Engineer. As Maintenance Engineer,you will be responsible for carrying out maintenance work in line with the schedule and processes. Working from their manufacturing facility in Warwickshire,the Maintenance Engineerwill be responsible for: \*Planned preventative maintenance \*Mechanical/electrical breakdown cover for all activities on site \*Ability to read and understand both electrical and mechanical drawings \*Knowledge of PLC's \*Knowledge of Robots The successful candidate should have a minimum of two years experience and apprentice trained preferred. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.

Salary - £50,000 + Overtime (OTE £58k) + Great benefits package Location, commutable from Daventry, Northampton A fantastic opportunity for a Maintenance Engineer has arisen to work for an internationally renowned automation solutions provider based in the Daventry area. Skills required for the role of Maintenance Engineer Maintenance and repairs on a range of automated equipment Carry out PPMs Electrical engineering Motors, invertors, sensors, fault finding etc. Mechanical Servicing and maintenance PLCs fault finding Recognised engineering qualification (electrical / electronic / mechatronics) Company benefits £50,000 + Overtime + Great benefits package Pension Scheme / Holidays / Life assurance Excellent individual career development plans Commutable from: Daventry, Northampton Other job titles Automation Engineer, Maintenance Technician, Multi-skilled maintenance engineer, Reliability Technician, Engineering Technician

Maintenance Engineer - Double Days A recognised high volume manufacturer are currently looking to strengthen their Maintenancedepartment with the appointment of a Maintenance Engineer. As Maintenance Engineer, you will be responsible for carrying out maintenance work in line with the schedule and processes. Working from their manufacturing facility, the Maintenance Engineerwill be responsible for: \*Planned preventative maintenance \*Mechanical/electrical breakdown cover for all activities on site \*Ability to read and understand both electrical and mechanical drawings \*Knowledge of PLC's \*Knowledge of Robots The successful candidate should have a minimum of two years experience and apprentice trained preferred. If you believe you have the required skills and experience please apply now. M-Tec Engineering Solutions is a leading supplier of Permanent, Interim and Project Management Recruitment Solutions to the Automotive and General Engineering sectors. Due to the overwhelming response to vacancies in this current climate, if you have not heard from us within the next two weeks you have been unsuccessful at this time.

KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland’s infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and is seeking a CAD Engineer. The successful candidate will be self-motivated and possess a couple of years experience in design. Be competent in auto CAD/CIV3D and have a working knowledge in Revit. Have experience in rebar design and detailing with an eye for detail, able to check and validate drawings/models to and from the client while acting as a support function between site and Document Control.

Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.

Your team

• Location: Devonport Dockyard, Plymouth
• Contract: Permanent, 42.5 hours a week

Making Possible

In this role, you will be working in a live MOD facility. Your day-to-day will include:

• Act as a subject matter expert for the production of drawings and provide technical support to personnel as and when required.
• Ensure that all drawing work is carried out in compliance with ISO 19650, BAM and CAD standards.
• Provide Drawing production training, both to the team members and to the supply chain.
• Provide support to the Document Control team to review Drawings before submitting to the client.
• Understand the hardware and software requirements on the project and communicate with the BIM Lead and Project information Manager.
• Represent the company where necessary at internal and external meetings.
• Maintain high safety and environmental standards in accordance with company policies and report any inadequacies

What do you bring to the role?

• Degree in related discipline (Civil Engineering, Architecture, etc.) is preferred.
• Able to collaborate and work effectively within a multidisciplinary and diverse team, with strong communication and interpersonal skills.
• Experienced in rebar design and checking.
• Have good understanding of civil/structural design and principles.
• Have a strong background in producing drawings
• Proficient in AutoCAD
• Able to train and mentor site engineers and others to produce in accordance with standards.
• Prior experience of ProjectWise and Revit beneficial but not essential.
• Basic awareness of ISO 19650 (Level 2 BIM) or BS1192 and associated PAS/BS 1192 codes required.

Whats in it for you?

• Competitive salary
• A wide range of family-friendly policies
• Company car/car allowance/travel allowance
• 8 % matched pension contributions
• Private healthcare
• Life assurance
• 26 days holiday
• 2 wellbeing days
• 1 volunteering day
• Personal and professional development

About BAM

Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.

We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.

Position: Mechanical Project Engineer

Location: Thornbury, Bristol

Salary: £60,000 - £65,000 DOE

My client is a leading provider of Design, Fabrication and Installation / Relocation services, predominantly focused on Pharmaceutical and FMCG environments with long standing relationships in both sectors. The ideal candidate will come from a Fabrication / Pipework background with demonstrable Site Management and Project management experience and previous tenure in FMCG / Pharmaceutical / Hygienic environments. You will need to be based within a commutable distance of Bristol for this role.

Mechanical Project Engineer Job Overview

• Attending to clients’ needs both on and off site and servicing projects from start to finish
• Quoting clients’ job requirements, seeking approval via Regional Director
• Proactively developing client relationships, ensuring continuation of projects
• On-site management including co-ordination and supervision of tradesmen
• Managing resources in line with project budget, controlling costs and ensuring clients’ expectations of quality are met
• Ensuring all Health & Safety requirements are adhered to

Mechanical Project Engineer Job Requirements

• Previous experience in a Project Engineer / client facing position
• Mechanical / Industry experience essential
• Industry knowledge of steam, chilled water and compressed air systems
• Process Pipe work experience is essential
• Knowledge of AutoCAD, Design ability and Microsoft Office
• Either IOSH or NEBOSH qualified
• Commutable distance to Bristol
• Full UK Driving License

Mechanical Project Engineer Salary & Benefits

• Salary £60,000 - £70,000 dependent upon experience
• Working hours, Monday to Friday 8am - 5pm (40 hour working week)
• 28 days holiday including bank holiday
• Pension

Bennett & Game Recruitment are acting as a Recruitment Agency in relation to this vacancy.

Bennett and Game Recruitment are a multi-disciplined technical recruitment agency based in Chichester, West Sussex operating across the UK with specialist teams covering a range of industries.

We are acting as a Recruitment Agency in relation to this vacancy, and in accordance with GDPR by applying you are granting us consent to process your data, contact you about the services we offer, and submit your CV for the role you have applied for.