Job Title: Electric Vehicle Maintenance Engineer

Salary: £18.88phr - Rates depend on experience

Location: Within 1 hour of Chesterfield
Hours: Monday to Friday, minimum -(site working hours vary)
Rate of Pay: From £18.88phr per hour plus OT— DEPENDING ON EXPERIENCE

NuTrade recruitment are working with an electrical contractor who are looking to add an “EV/Solar electrician” to their team.

This role involves site-based work, primarily working away from the office, with opportunities for overtime, night shifts, and weekend work available.

What We Offer:

* Pay: Depending on experience

* Paid travel time DOOR TO DOOR

* Holidays: 21 days plus bank holidays, plus 1 year for every year of service

* Pension scheme

* Death in service insurance

* Company van

* Full PPE provided

* Paid time off over Christmas

* Meal allowance: £25 per night when working away.

* Training & development: Ongoing opportunities

Role Requirements:

* Gold JIB Card or may consider ECS card with an NVQ Level 3

* C&G 2921 -EV Qualification

* Experience in mainly commercial and some domestic installs

* Able to work under your own initiative

* Experience working on-site in various environments.

* Full UK driving licence

All works carried out will be on commercial sites, such as large warehouses, offices, and shops.

The role involves a lot of driving, changing parts, fault finding/diagnostic on EV chargers on commercial sites with occasional working away for 1 or 2 nights a month, so quite irregular.

The working hours vary, mostly at 8hrs, if the job is done quicker, you will still get the 8 hours. Travel is paid at normal time, and any weekend work is x1.5.

* Clean drivers licence is a must

* £18.88/hour

* Training provided

* Company vehicle provided once training etc., is complete

* 21 days holiday + statutory, +1 per year worked up to a max 25 days

* Death in service takes effect after 6 months of service

To apply please send a CV and one of the team will be in touch, or call (phone number removed) - (phone number removed)

Security Install Engineer – CCTV, Access Control & Intruder Alarms

Location: M4 Corridor
Salary: £40,000 – £45,000 per annum + Overtime
Job Type: Full-Time | Permanent

The Opportunity

We are currently recruiting for an experienced Security Install Engineer to join a well-established and growing security systems company. Due to continued success and increasing demand across the M4 Corridor, our client is expanding their engineering team and looking for a motivated individual with experience in CCTV, Access Control, and Intruder Alarm installations.

This is an excellent opportunity for a security engineer seeking long-term stability, strong earning potential, and ongoing technical development.

Package & Benefits

* Basic Salary: £40,000 – £45,000 per annum (negotiable depending on experience)

* Overtime available to significantly increase annual earnings

* Company vehicle and fuel card

* Travel time paid

* Pension scheme

* Annual leave entitlement

* Ongoing training and career development

* Full-time, permanent position

Role & Responsibilities

As a Security Install Engineer, your duties will include:

* Installation of IP CCTV systems, Access Control, and Intruder Alarms

* Field-based role covering commercial and residential sites along the M4 Corridor

* Working with a range of leading security manufacturers and systems

* Ensuring installations meet high-quality and compliance standards

* Maintaining excellent communication with customers at all times

* Completing work efficiently and accurately

* Supporting colleagues and contributing to team success when required

Skills & Experience Required

* Full UK driving licence (essential)

* Experience installing CCTV, Access Control, and/or Intruder Alarm systems

* Ideally 3+ years’ experience within the security industry (desirable but not essential)

* Candidates with experience in one or two disciplines encouraged to apply; training provided

* Familiarity with multiple security system manufacturers

* Strong work ethic, positive attitude, and self-motivation

* Ability to work independently across multiple sites

Desirable Qualifications (Not Essential):

* IPAF

* CSCS / ECS

* FIA Units

* City & Guilds (Security Systems or Electrical)

How to Apply

If you are a Security Install Engineer looking for your next career move with a reputable and growing company, please submit your CV to be considered. All applications will be handled confidentially.

Keywords

Security Install Engineer, Security Engineer, CCTV Engineer, Access Control Engineer, Intruder Alarm Engineer, Fire and Security Engineer, IP CCTV Installation, Door Access Systems, Alarm Installation, Field Service Engineer, Electronic Security Systems, M4 Corridor Jobs, Security Systems Engineer, Commercial Security Engineer, CSCS Security Engineer, IPAF Engineer, Permanent Security Engineer

Fire Alarm & Fire Extinguisher Engineer – Hertfordshire – Up to £40,000 Basic Salary OTE £50,000 Per Annum

Fire Alarm & Fire Extinguisher Engineer Package Overview:

* Basic Salary: £35,000 - £40,000 per annum (depending on experience)

* Up to £50,000 OTE (including overtime, on-call and commission)

* Full-Time, Permanent Role

* Monday to Friday, 8:30am – 5:00pm

* Taking part in on-call work on a rotational basis

* Covering North London and Hertfordshire

* 25 days holiday plus bank holidays

* Pension scheme

* Vehicle, Tools, Uniform & PPE Provided

* Sick Pay

* Company events and rewards & recognition programs

Company Overview:

An award-winning fire and security company, currently experiencing significant growth, is looking to recruit an experienced Fire Alarm & Fire Extinguisher Engineer to join their team.

Fire Alarm & Fire Extinguisher Engineer Role and Responsibilities:

* Service, maintenance, repair and fault-finding of Fire alarms, Emergency Lights and Fire Extinguishers

* Covering multiple sites in North London and Hertfordshire

* Working with a range of manufacturers and fire detection equipment

* Taking part in out of hours on-call work on a rotational basis

Fire Alarm & Fire Extinguisher Engineer Required Experience:

* Experience in servicing, fault-finding, and small works on a variety of fire alarms and extinguishers

* Knowledge of conventional, addressable fire alarm systems

* Familiarity with major brands of panels such as Morley, Advanced, Kentec, C-Tec, Gent, Notifier, VESDA and more

* Experience with fire extinguishers and emergency lighting

* Understanding of NSI codes of practice and current industry standards

* Full UK Manual Driving Licence is required

* Excellent communication skills, self-motivation, and good time-management

Package Info & Benefits Offered:

* £35,000 - £40,000 basic salary (depending on experience)

* Up to £50,000 OTE (including overtime, on-call and commission)

* 25 days holiday plus bank holidays

* Pension scheme, BUPA Health & Safety and employee assistance program

* Vehicle, Tools, Uniform & PPE Provided

* Sick Pay

* Company events and rewards & recognition programs

DON’T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW

Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers

Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

Security Engineer – London – Up to £46,000 Basic Salary OTE £55,000 Per Annum

Security Engineer Package Overview:

* Basic Salary: £36,000 - £46,000 per annum (depending on experience)

* Up to £55,000 OTE (including overtime, on-call and commission)

* Full-Time, Permanent Role

* Working Hours: Monday to Friday, 8:30am – 5:00pm

* Taking part in out of hours on-call on a rotational basis

* Covering London and the M25

* 25 days holiday plus bank holidays

* Pension Scheme

* Van, Tools, Uniform & PPE Provided

* Sick Pay

* Company Events and Rewards & Recognition Programmes

Company Overview:

Our client, who are an award-winning, fast-growing security company are looking to recruit an experienced Security Engineer to join their team in the London area.

Security Engineer Role and Responsibilities:

* Service systems and respond to reactive calls to fault-find and repair Intruder Alarms, CCTV & Access Control Systems

* Covering various residential and commercial sites

* Taking part in out of hours on-call work on a rotational basis

* Working with a range of manufacturers

* Carrying out effective communication with customers to ensure the highest level of service

Security Engineer Required Experience:

* At least 3 years’ experience Servicing and fault-finding on Intruder Alarm Systems

* Experience with access control, door entry systems, and IP & analogue CCTV systems

* Understanding of major security panel brands and app-based systems

* Knowledge of industry standards and NSI codes of practice

* Full UK manual driving licence is essential

* Strong communication skills, with the ability to work independently and as part of a team

Package Info & Benefits Offered:

* £36,000 - £46,000 basic salary (depending on experience)

* Up to £50,000 OTE (including overtime, on-call and commission)

* 25 days holiday plus bank holidays

* Pension scheme, BUPA Health & Safety and employee assistance program

* Vehicle, Tools, Uniform & PPE Provided

* Sick Pay

* Company events and rewards & recognition programs

DON’T MISS OUT ON THIS GREAT OPPORTUNITY - APPLY NOW

Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers.

Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful

IT Field Service Engineer – Worcester - £30k - £34k + excellent benefits
Our client is a well-established MSP providing Complete IT Support and Telecoms Solutions within the Worcester and surrounding areas. Due to continued growth and expansion, they are now looking to recruit an IT Field Service Engineer.
As an IT Field Service Engineer, you will be a key part of our client’s customer-facing technical operations. The position involves frequent on-site visits to client premises, delivering hands-on technical support and building strong customer relationships. You will provide a mixture of remote and on-site support, diagnose and resolve technical issues, and always ensure an exceptional level of service. Excellent communication skills, both written and verbal, are essential, as you will guide customers through troubleshooting steps and represent the organisation during site visits.
Responsibilities include:
* Provide extensive on‑site support, acting as the primary technical resource during customer visits.
* Conduct regular scheduled and reactive site visits to diagnose, troubleshoot, and resolve complex technical issues that cannot be handled remotely.
* Perform full on‑site system reviews, including workstation, server, and network health checks.
* Install, configure, and maintain computer systems, servers, networking hardware, and peripherals during site deployments.
* Carry out on‑site network troubleshooting, including cabling checks, switch configuration, Wi‑Fi optimisation, and fault isolation.
* Support customer office moves, on‑site equipment rollouts, and infrastructure upgrades.
* Provide remote support for hardware, software, and network issues when not on-site.
* Collaborate with vendors to identify issues and implement fixes.
* Conduct regular system maintenance tasks such as backups, restores, updates, and physical server checks.
* Manage and maintain infrastructure including Windows Server, Windows OS, Azure AD, Active Directory, and Office 365 environments.
* Document and track all support activities using our client’s ticketing system
* Assist with bespoke software installations and updates.
* Support the resolution of network-related issues including VPN, LAN, DNS, and firewall troubleshooting.
* Work closely with team members to deliver IT and telephony technical solutions.
* Participate in out-of-hours maintenance windows (e.g., server updates, project rollouts) where required.
The Ideal Candidate will have:
* Experience with Windows Server, Windows Operating Systems, Android, iOS, and Office 365.
* Strong understanding of network protocols, VPNs, LANs, DNS, and Firewalls.
* Experience with backup and recovery platforms such as Veeam and Acronis.
* Proficiency in Active Directory and Microsoft Exchange administration.
* Experience supporting cloud migrations (e.g. on‑premises to cloud).
* Knowledge of anti-virus deployment and maintenance.
* Experience configuring and troubleshooting firewalls and modems.
* Hands‑on experience with Ubiquiti networking hardware.
Beneficial if you have the following:
* Understanding of 3CX and other VoIP/telephony platforms.
* Knowledge of Linux-based operating systems.
* Experience working with AWS cloud environments.
Qualifications and Education Requirements
* Minimum 5 years’ experience working within an IT support role.
* Minimum 2+ years’ experience working within a Managed Service Provider (MSP) environment.
* Full UK driving licence with no more than 3 penalty points and access to own vehicle.
Keywords – IT support, 1st line support, 2nd line support, IT Field Support, ICT field support, Windows Server, Windows Operating Systems, Android, iOS, Office 365, MSP, Managed Service Provider, 3CX, VoIP/telephony platforms, Linux, network protocols, VPNs, LANs, DNS, Firewalls, cloud, Veeam, Acronis, IT Field Service Engineer, AWS, on-site support, technical support, support, AWS cloud, Worcester, driving licence, Ubiquiti

Multi-Skilled Maintenance Engineer (Mech or Elec Biased)

Location: Hull
Salary: £40,000 - £47,000
Hours: 3 - shift (One Week Mornings, One Week Of Backs, One of Nights) 8 Hours - Early Finish Friday!
Contract: Full-time, permanent

The Opportunity

Our client, a leading manufacturing and packaging facility operating in Hull, is seeking a Multi-Skilled Maintenance Technician to join their established engineering team.

You’ll work across a mix of modern and ageing equipment, using your electrical and mechanical expertise to keep high-speed automated production lines running safely, efficiently, and with minimal downtime. This role suits a proactive, hands-on engineer capable of working to high standards without close supervision.

Key Responsibilities

Provide effective breakdown response, repairs and maintenance across machinery, equipment, services and site facilities.

Carry out electrical and mechanical fault-finding, diagnostics, and repairs to minimise downtime and improve OEE.

Complete planned preventive maintenance (PPM) and create new PPM schedules where needed.

Install, commission and support new machinery and equipment.

Read, interpret, and update electrical and mechanical engineering drawings.

Liaise with the Maintenance Supervisor to prioritise tasks aligned with production demands.

Log all work using the site system (Shire) and ensure accurate documentation.

Maintain excellent housekeeping standards and support 6S, TPM, and continuous improvement initiatives.

Advise production during breakdowns using strong decision-making and root-cause analysis skills.

Support external contractors and engage with suppliers when required.

Skills & Experience Required

Essential:

Completed apprenticeship or equivalent engineering qualification.

NVQ Level 3 in Electrical or Mechanical Engineering (or equivalent).

Proven multi-skilled engineering experience within a fast-moving manufacturing environment.

Ability to read and update electrical and mechanical schematics.

Strong electrical fault-finding & diagnostic competence.

Experience with PPM, reactive maintenance, and plant repairs.

Good communication and ability to work effectively under pressure

If interested Just apply or for a confidental chat feel free to email me on / (phone number removed)

Role: Senior Maintenance Engineer

Location: Mansfield

Package: £57,500 per annum plus industry leading benefits package

Shifts: 4 days 4 off 4 nights 4 off

The Company

ATA Recruitment are proud to be working with a global client who are ever growing their group and increasing their status within the Global economy, now having stores in various industries in over 20 countries across the world the group has been established for 40 years and since then they have grown and gone from strength to strength creating this engineering opportunity with lots of security which is a huge benefit in the current financial climate. At their site in Mansfield they are currently recruiting for a number of Maintenance Engineers to join the site and creating an opportunity to work on some state-of-the-art equipment following the recent expansion of the site. So grab this opportunity with both hands whilst you can.

The site in Mansfield is one of the largest facilities in Europe providing plenty of progression opportunity whether you want to progress technically or into man management the ball is in your court with the company fully supporting you! Since the site has opened there has been hundreds of millions of pounds invested into the engineering and automation function helping make the site efficient and embarking on a journey of continuous improvement. To help the journey and increase the commitment the current Head of Engineering, has helped the company overcome the teething issues, and has supported steady the ship over the last couple of years and increase the retention but also continued the investment and development on the site

The Role

As a Senior Maintenance Engineer you will:

On a shift you will be joining a Shift Manager, a fellow Senior Engineer, 8 Maintenance Engineers, 3 apprentices and a couple of jam busters
Your responsibilities will include: Electrical and Mechanical fault finding, Reactive and PPM work and many more
Working with Maintenance Engineers, Juniors and an apprentice on a shift and covering shift management etc
The site is looking to introduce more use of the CMMS system as it starts to develop with all the new machinery
Working on this site you will be working on Various conveyor systems, shuttle systems, Packaging equipment, Bagging Machines and more
The Candidate

I am looking for a candidate that:

Has a recognised Engineering Qualification
As strong communicator that can work as part of a team
Has had experience in leadership
Experience working in the Manufacturing environment
Confident fault finding and reading drawings
The Package

As a Maintenance Engineer you will receive:

£57,500 per annum as a starting salary
A pension contribution from my client
A gym on site £5 a month
A heavy discount on my clients groups stores
ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

Role: Maintenance Engineer

Location: Mansfield

Salary: £52,500 plus Group discount and technical development

Shifts: 4on 4off Days and Nights

The Company

ATA Recruitment are proud to be working with a global client who are ever growing their group and increasing their status within the Global economy, now having stores in various industries in over 20 countries across the world the group has been established for 40 years and since then they have grown and gone from strength to strength creating this engineering opportunity with lots of security which is a huge benefit in the current financial climate. At their site in Mansfield they are currently recruiting for a number of Maintenance Engineers to join the site and creating an opportunity to work on some state-of-the-art equipment following the recent expansion of the site. So grab this opportunity with both hands whilst you can.

The site in Mansfield is one of the largest facilities in Europe providing plenty of progression opportunity whether you want to progress technically or into man management the ball is in your court with the company fully supporting you! Since the site has opened there has been hundreds of millions of pounds invested into the engineering and automation function helping make the site efficient and embarking on a journey of continuous improvement. To help the journey and increase the commitment the current Head of Engineering, has helped the company overcome the teething issues, and has supported steady the ship over the last couple of years and increase the retention but also continued the investment and development on the site

The Role

As a Maintenance Engineer you will:

• Be joining a shift team of 10 engineers including, SMEs and Shift Managers who don’t shy away from a challenge and supporting the team and helping development of their team

• Be responsible for Electrical and Mechanical fault finding on fully automated systems, Following PPMs using the companies CMMS system following the recent installation of the software as a huge part of their long-term development of the site

• React to any breakdowns during the shift and be an essential part of engineering problems out and ensuring they don’t happen again

• Be working on over £200 million worth of automated machinery and some high-tech equipment including various conveyor systems, ASRS systems, Packaging equipment just to name a few!

The Engineer

I am looking for a Maintenance Engineer that:

• Has a recognised engineering qualification

• Can communicate confidently and work as part of a team depending on the need

• Work under pressure in a fast moving environment

• Fault find confidently and isolate systems to make them safe to work on

• Alternatively my client fully supports candidates from a Forces back ground and welcome them with open arms

The Package and Benefits

As a Maintenance Engineer you will receive

• An annual salary of £52,500

• Pension Contribution

• Discounted on site gym membership

• Online Learning content with unlimited access

• Refer a friend scheme and employee of the month which is DOUBLE monthly salary

ATA is committed to creating a diverse workforce and is an equal opportunities employer. We welcome applications from all suitably qualified persons regardless of age, disability, gender, marriage and civil partnership, pregnancy and maternity, race, religion or belief, sex, and sexual orientation

FM Service Provider – Commercial Estate – Denmark Hill, South East London - Up to £50,000 per annum

CBW Staffing Solutions are currently recruiting for a Static Air Conditioning Maintenance Engineer to work on a large, well-established commercial estate in Denmark Hill, South East London.

You’ll be part of a dedicated on-site engineering team of 8 engineers, working collaboratively to deliver a high standard of planned and reactive maintenance across the site. The team is experienced, supportive, and well-structured, ensuring you receive a thorough handover and ongoing support with the plant, systems, and site procedures. The campus benefits from excellent staff facilities, including multiple coffee outlets, on-site restaurants, dedicated break areas, and secure bike storage, creating a comfortable and well-equipped working environment. In return, the company offers a competitive salary of up to £50,000, regular overtime opportunities, 25 days holiday plus bank holidays, ongoing technical training, and clear long-term career progression within a leading FM service provider.

Key Duties & Responsibilities:

Carry out planned and reactive maintenance on a wide range of air conditioning systems, including VRV/VRF, split systems, AHUs, and FCUs
Diagnose faults and carry out repairs to ensure systems operate efficiently and reliably
Perform routine inspections, filter changes, coil cleaning, and system testing
Ensure all works comply with F-Gas regulations and industry standards
Respond promptly and professionally to breakdowns to minimise downtime
Accurately complete maintenance records, job sheets, and reports
Work closely with the wider engineering team to ensure smooth site operations
Identify system improvements and recommend upgrades where appropriatePackage:

Salary: Up to £50,000 per annum
Hours: Monday to Friday, 8am–5pm (40 hours)
Holiday: 25 days plus bank holidays
Overtime: Available
Progression: Ongoing training and clear career developmentRequirements:

Valid and up-to-date F-Gas certification and relevant NVQ qualifications

Proven experience within an HVAC / Building Services environment

Stable employment history within HVAC, FM, or Building Services

Strong technical knowledge of a broad range of air conditioning systems

Ability to work independently while also being an effective team player

Good organisational skills with the ability to manage workload and paperwork

Professional, client-focused approach with strong communication skills

Positive, proactive attitude with flexibility in approach to problem-solving

If this role is of interest, please don’t hesitate to send your CV to Charlie at CBW Staffing Solutions

Maintenance Engineer (Starting salary £50,388)

Based in the Lisburn area my client is a large engineering / manufacturing company who manufacture products for the global market. They are currently recruiting for a Maintenance Engineer who is a time served Electrician or Mechatrician with recent experience working in a manufacturing environment. On offer is a starting salary of £50,388 which rises with training, overtime is paid at time and a half after 40.25 hours, pension - company 4% and employee 5%, death in service £60,000, sick pay, private healthcare and subsidised canteen. All levels of post apprenticeship experience will be considered.

Shift pattern: Maintenance Engineer

Wk 1: Mon, Tues, Fri, Sat, Sun 7am 7pm days

Wk 2: Wed, Thurs7am 7pm days

Wk 3: Mon, Tues, Fri, Sat, Sun 7pm 7am nights

Wk 4: Wed, Thurs 7pm 7am nights

Role Maintenance Engineer

• Respondquicklytobreakdownsituationswhenapplicable.
• Carryoutplannedmaintenanceasdirectedbyyourlinemanager.
• Promptlycompletealldocumentationforalljobsandraiseoutstandingjobrequestswhenrequired.
• Liaise on an on-going basis with Supervisors, Managers and Supervisors about problems and the efficiency of machines in designated areas.

Person Maintenance Engineer

• Candidates must be time served Maintenance Electricians, Mechatricians or Fitters with electrical qualifications and who have recent experience working within a manufacturing environment.

For a confidential conversation regarding this Maintenance Engineer job contact James Coulter. Alternatively send your CV by applying below. C-Tech Recruitment is an engineering and manufacturing recruitment agency with 20 years experience specialising in the Northern Ireland market.

Skills:
Electrical Maintenance Mechanical Maintenance Fault Finding Electrical Equipment Multi-Skilled Engineering Corrective maintenance Planned Preventative

Senior Maintenance Engineer (Salary £54,000 plus £4,000 bonus)

Based in the Belfast area my client is a large heavy engineering manufacturing company who manufacture products for the global market. They are currently recruiting for a Senior Maintenance Engineer who will provide technical support to the one of the Maintenance Engineering teams.

As one of the Senior Maintenance Engineers you will provide technical knowledge and expertise plant-wide on equipment, including PLCs, robots, drives and temperature controllers etc.

On offer: SeniorMaintenance Engineer

• Salary £54,000
• Bonus £4,000
• Overtime paid at time and a half
• Private healthcare
• Death in service
• Sick pay
• Pension
• Subsidised canteen
• Long term promotional opportunities

Shift pattern: Senior Maintenance Engineer

Wk 1: Mon, Tues, Fri, Sat, Sun 7am 7pm days

Wk 2: Wed, Thurs7am 7pm days

Wk 3: Mon, Tues, Fri, Sat, Sun 7pm 7am nights

Wk 4: Wed, Thurs 7pm 7am nights

Person: Senior Maintenance Engineer

To be suitable you must be a time served Electrician or Mechatrician who has recent experience working in a manufacturing environment. Additionally, you must have extensive PLC fault finding and electrical / mechanical experience and be a problem solver.

For a confidential conversation regarding this Senior Maintenance Engineerjob contact James Coulter. Alternatively send your CV by applying below. C-Tech Recruitment is an engineering and manufacturing recruitment agency with 20 years experience specialising in the Northern Ireland market.

Skills:
Multi-Skilled Engineering Electrical Maintenance PLC Fault Finding Mechanical Maintenance Breakdown Engineering Programmable logic controller

Maintenance Engineer

40-45k

Antrim

We are seeking a highly skilled and experienced Maintenance Engineer with a strong background in both electrical and mechanical systems. This is a key role within a fast-paced, high-volume production environment, ensuring that machinery and equipment are maintained to the highest standard and downtime is minimised.

The Role

• As a Maintenance Engineer, you will be responsible for:
• Delivering planned, reactive, and proactive maintenance on high-speed automated equipment.
• Troubleshooting and repairing electrical, mechanical, pneumatic, and PLC-controlled systems.

Essential Criteria

• Strong knowledge and practical experience of electrical, mechanical, pneumatics, and programming.
• Experience troubleshooting and recovering equipment in a fast-paced environment.
• Knowledge of CNC, PC-controlled, and PLC-controlled systems is desirable.

If interested in hearing anymore details don’t hesitate to reach out on and ask for Morrie

Skills:
Breakdowns PPM Mechanical Maintenance

Derry, Northern Ireland

Vertiv is the largest electrical switchgear manufacturer in the UK & Ireland, pioneering unique in-house integrated power solutions tailored to each individual client project. We believe that our people are our best asset and have invested in a highly qualified and experienced team of Engineers to work in our manufacturing facilities across three continents. With over 30 years of experience in delivering high-quality integrated power solutions, we are experts in providing technical services, project management services, and unrivalled customer support for every client project.

Our MV Switchgear division designs and manufacture electrical distribution equipment for business-critical applications throughout Europe. Due to continued growth, Vertiv is seeking to recruit an ambitious and motivated System Protection Engineer to join our team.

#LI-JK1 #vertivireland

Key responsibilities:
Develop programmable logic files using ABB’s PCM600, Schneider electric’s
Easergy Pro, SEL’s AcSELerator Quickset, and DIGSI 5.
Understanding of 3 phase power systems and standard electrical equations.
Reading of protection studies, determining pick up & drop off currents,
current & voltage transformer ratios, circuit breaker trip times in both definite
time and IEC curve trip times.
Reading of electrical schematics to identify problems and tracing them to
their root cause to solve issues.
Liaise with project managers to ensure projects meet technical requirements,
outlined in specification and tech subs.
Communication with a multi-disciplinary team, coordinating with design,
production, test, and EMS (energy management system) engineers, to
ensure deadlines are met for product delivery, while ensuring high quality
integrated product.
Testing of switchgear functionality, inputs and outputs are activated as
expected based on the programmable logic defined in programmed file.
Secondary inject testing of CT (current transformer) proving circuit breaker
tripping operation times and comparing results to expected trip times outlined
by protection study, calculated by IDMT curve equations.
Build an understanding of switchgear function and general operation,
interoperate site wide SLDs (Single line diagrams) to gain understanding
power flow and cross communication between switchboards.
Read in house wiring drawings to fault find a troubleshooting issues that
arise during commissioning and post hand-over.
Presentation of projects to clients in FWT (factory witness test) proving
products meets requirements before dispatch, answering any relevant
questions, and making modifications post FWT based on feedback received.
Conduct SAT (site acceptance test) to clients ensuring product is fully
functional, once accepted and installed on-site.
Provide client support, travelling to site resolving outstanding issues that
have been highlighted in commissioning process before energization of
product.
Build up to gaining proficiency in IEC61850 communication standard both
MMS (Client server) and GOOSE (Peer-peer). Using tools such as IED scout
to troubleshoot issues on the networks of IEDs (protection relays).

Essential requirements
Electrical and Electronic Engineering BENG/ MENG, or other relevant
degree, or Distinction grade HND (higher level diploma)
1 Year industrial placement in manufacturing or design or work experience in
a relevant field.
Ability to read electrical schematics.
Positive attitude, desire to learn, and grow as an engineer in this field.
Willing to travel across UK and Europe occasionally, as required.

Desired requirements
Interest in programmable logic for example Arduino or Raspberry Pi.
Good communication and presentation skills.
Experience wiring control panels of any description.
Good time management with ability to work under pressure to meet
deadlines.
Experience with primary/secondary injection of current and voltage.
Data centre/ on-site commissioning experience.
Willingness to work overtime as and when required.

Travel: 5-10% across EMEA

To be considered for this role you will be redirected to and must complete the application process on our careers page. To start the process, click the Apply button below to Login/Register.

Location: Belfast (Hybrid working)

Your role

We are looking for a Technical Service Engineer Practitioner (Senior) to join one of our 3rd line infrastructure engineering teams. Your role will involve working within a very dynamic operations team who support Linux, storage, virtualisation and backup environments. The role requires a self-motivated person, with strong inter-personal skills, who can communicate effectively with people at all levels. This team is working with a long-standing client who is in embarking on a major technical refresh.

Your Transferable Skills and Experience

Essential Skills

• Extensive experience supporting Linux or Unix

Proven record of leading Major Incident/Problem/Change Management
Proven ability as an SME in a range of systems
Experience of working within medium/large sized project transitions
Experience in managing relationships with key internal and external technical stakeholders

You must willing and eligible to undergo required clearance for this position .

Note: This position is based in Belfast due to the proximity to the DCs. This is a hybrid role, the person appointed will initially be expected to attend the office to support training.

We are a Disability Confident Employer and will offer an interview to disabled applicants who meet the minimum/essential criteria for the role. Email if you would like to apply through the Disability Confident Interview Scheme.

Achieve together

We are recognised as a responsible and inclusive employer: Not only are we a certified Disability Confident Leader, a Times Top 50 employer for Gender Equality, a Top 75 employer for Social Mobility, accredited with the Living Wage Foundation and a signatory for the Race at Work Charter, but we are also committed to the United Nations standards for LGBTI+ and a Stonewall Top 100 Employer.

We are people centric: Our work environments enable you to Be Completely You. Our active people-led Inclusive Community networks are representative of all aspects of diversity and are instrumental in enabling and supporting our innovative approach to inclusion.

#LifeAtFujitsu #IIM

Work with Us. Change the World.

At AECOM, we’re delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world’s trusted infrastructure consulting firm, partnering with clients to solve the worlds most complex challenges and build legacies for future generations.

There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world.

We’re one global team driven by our common purpose to deliver a better world. Join us.

Job Description

Start here. Grow here.

Our Belfast office is seeking a Mechanical Building Services Engineerto join our well-established and growing team. This is an excellent opportunity for an ambitious, client-facing engineer who is ready to take on a leading role in delivering high-quality projects across Northern Ireland.

You will work on a wide range of exciting and high-profile projects, collaborating within a multidisciplinary environment and contributing to innovative, well-engineered solutions. The ideal candidate is self-motivated, confident, and demonstrates strong technical and team leadership capabilities.

What youll do

• Undertake specific engineering tasks as part of wider project assignments under the guidance of senior engineers

Gather, analyse, and correlate engineering data using established procedures

Carry out detailed and routine mechanical engineering calculations and design tasks

Propose solutions to new and emerging technical challenges

Identify and resolve discrepancies in design outputs and calculations

Provide guidance and support to entry-level engineers

Deliver work in line with agreed budgets and project schedules with moderate supervision

Produce and develop BIM models directly in Revit

Present design calculations clearly and coherently

Collaborate effectively within a multidisciplinary project team

Qualifications

Ready to push the limits of whats possible?

Requirements

• Degree in Mechanical Engineering, Building Services Engineering, or a related technical discipline

MEng (Hons) or higher-level qualification is desirable

Additional Information

Interested in the role or curious about life at AECOM? Follow us on LinkedIn, Facebook, Instagram, and YouTube to explore our AECOM voices, employee stories, latest projects, and much more!

For further information about the role, reach out to the recruiter on LinkedIn Colum Calnan.

About AECOM

AECOM is the worlds trusted infrastructure consulting firm, delivering professional services throughout the project lifecycle from advisory, planning, design and engineering to program and construction management. On projects spanning transportation, buildings, water, new energy and the environment, our public- and private-sector clients trust us to solve their most complex challenges. Our teams are driven by a common purpose to deliver a better world through our unrivaled technical and digital expertise, a culture of equity, diversity and inclusion, and a commitment to environmental, social and governance priorities. AECOM is a Fortune 500 firm and its Professional Services business had revenue of $14.4 billion in fiscal year 2023. See how we are delivering sustainable legacies for generations to and @AECOM.

Freedom to Grow in a World of Opportunity

You will have the flexibility you need to do your best work with hybrid work options.Whether youre working from an AECOM office, remote location or at a client site, you will be working in a dynamic environment where your integrity, entrepreneurial spirit and pioneering mindset are championed.

You will help us foster a safe and respectful workplace, where we invite everyone to bring their whole selves to work using their unique talents, backgrounds and expertise to create transformational outcomes for our clients.

AECOM provides a wide array of compensation, benefits and well-being programs to meet the diverse needs of our employees and their families. Were the worlds trusted global infrastructure firm, and were in this together your growth and success are ours too.

Join us, and youll get all the benefits of being a part of a global, publicly traded firm access to industry-leading technology and thinking and transformational work with big impact and work flexibility.As an Equal Opportunity Employer, we believe in each persons potential, and well help you reach yours.

We are aDisabilityConfidentEmployer and will offer an interview to applicants who have a disability or long-term condition, who meet the minimum/essential criteria for the role. Please let us know using this email address if you would like to apply through theDisabilityConfidentInterview Scheme.

All your information will be kept confidential according to EEO guidelines.

Moira base, covering Northern Ireland

£35,000 - £37,000 doe + vehicle + benefits

A fantastic opportunity has arisen to join a well-established and reputable Northern Irelandbased Fire and Security company, recognised for delivering high-quality, industry-leading solutions. Specialising in CCTV, intruder alarms, and integrated security systems, the company continues to grow and innovate within the sector. They are now looking to recruit a Fire and Security Engineer to become part of their dedicated and expanding team.

Duties within the role will include;

• Install, configure, and commission CCTV systems, intruder alarms, access control systems and fire alarm systems at client sites
• Carry out planned preventative maintenance (PPM), fault-finding, diagnostics, and system repairs
• Observe and adhere to company Health and Safety guidelines and contribute to a Health and Safety working environment

What we are looking for

• Experienced in a similar fire / security role
• Full UK driving license
• Confident communication skills

Interviewing ASAP, for more info or to apply contact Emily via email, apply now or calling .

Skills:
fire security engineer CCTV intruder alarms

MECHANICAL DESIGN ENGINEER

Are you a talented Mechanical Design Engineer looking to develop your career in 2026?

Our client is a leading Engineering company within easily commutable distance of Belfast, designing and manufacturing a range of bespoke products. As a result of expansion, they are looking for a Mechanical Design Engineer with a minimum of 1 years experience to join their existing Design Team and work on a range of Client led designs .This represents an excellent opportunity to develop your career with a leading employer.

THE ROLE

The successful candidate will be expected to liaise with customers and produce 3D designs for new products and amendments to existing products. These designs should consider the manufacturing process and provide a balance between functionality and aesthetics.

THE PERSON

• Hold a degree in Mechanical, Manufacturing or Design Engineering or alternatively a lesser qualification if can demonstrate considerable practical experience.
• A minimum of 1 years experience working in a Manufacturing or Engineering environment with strong design skills
• Competent in using at least one major design software package ie Solid Works, Catia, Pro E etc
• A strong problem solver able to come up with innovative designs to overcome Engineering issues
• Excellent communication skills both orally and written
• Strong personal skills to assist customer interaction

SALARY

A highly competitive salary and benefits package is available for the successful candidate dependent on their level of relevant experience.

TO APPLY

To apply for this position please email your CV to us using the link below and we will contact you.

Please feel free to contact Colin at CMB Recruitment on if you wish to have a confidential discussion.

CMB Recruitment Ltd is acting on behalf of the client as a Recruitment Agency.

Skills:
Mechanical Design 3D Modelling Design for Manufacture Catia Solidworks

Benefits:
Pension

A well-established food manufacturing company in the Newry area is seeking a proactive and skilled Electrical Maintenance Engineer to join its growing engineering team. This is a fantastic opportunity to work in a state-of-the-art facility, supporting the production of high-quality food products for both national and international markets.

Key Responsibilities:

• Carry out planned preventative maintenance (PPM) and breakdown repairs on a range of production equipment including conveyors, forming machines, refrigeration units, and packaging systems
• Diagnose electrical faults and perform effective repairs to minimise downtime
• Support continuous improvement initiatives and assist with equipment upgrades
• Ensure all maintenance work complies with health, safety, and food hygiene standards
• Update maintenance logs and work orders using a CMMS system
• Collaborate with production and quality teams to maintain optimal line performance

Required Skills & Experience:

• Time-served Electrician or Level 3 NVQ in Electrical Engineering
• Experience in a manufacturing or food processing environment preferred
• Strong fault-finding and PLC experience
• Ability to read electrical schematics and work independently
• Awareness of HACCP and food safety compliance is an advantage

In return for a competitive salary, pension, healthcare and more!!

For more info or to apply, please apply now!

Skills:
Maintenance Electrical Repair

MULTI-SKILLED MAINTENANCE ENGINEER

Job Title: Multi Skilled Maintenance Engineer

Location: Sleaford

Salary: £50,000-£52,000

Shift: 4 on 4 off days and nights

Job Role of the Multi Skilled Maintenance Engineer

A strong opportunity has become available for a Multi Skilled Maintenance Engineer to join a respected, industry-leading manufacturing business with a reputation for excellence. Engineers here benefit from working for a company recognised for quality and operational standards.

You will be responsible for both electrical and mechanical maintenance, responding to breakdowns, completing planned preventative maintenance, and supporting continuous improvement initiatives across site machinery.

Sector - Factory Maintenance

Non-Negotiable Requirements of the Multi Skilled Maintenance Engineer

• Multi-skilled maintenance experience within an industrial manufacturing environment.
• Minimum Level 3 engineering qualifications
• Electrical and mechanical fault-finding experience

Desirable Requirements for the Multi Skilled Maintenance Engineer

• Previous experience working as a Maintenance Engineer in the UK.
• Experience with working on PLC’s, ideally being able to fault find using inputs and outputs
• Hands on experience with pre-planned, reactive and breakdown maintenance in fast paced industrial factory.

The Multi Skilled Maintenance Engineer will benefit from:

• Working for a recognised market-leading business.
• Training and development opportunities for engineers.
• Competitive pension

If you are interested in this role and feel that you have the right skills, then please click apply at the bottom of this advert.

For further details contact Sam Turner at Pioneer Selection

As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme.

You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Crushing & Screening Engineer Bristol £23ph to £25ph + Overtime + Company Vehicle + Benefits NEOS Engineering Recruitment are currently working with a well-established and highly respected business within the aggregate and material processing sector who are looking to appoint an experienced Crushing & Screening Engineer to support their operations across the South West. This is a fantastic opportunity to join a business operating some of the industry's leading equipment including GIPO and Metso crushing & screening machinery, supporting a busy fleet used across quarrying, recycling and aggregate production. The successful candidate will be responsible for the maintenance, service and repair of mobile crushing and screening equipment, ensuring machines are operating efficiently and safely across multiple sites. Key Responsibilities • Service, maintenance and repair of GIP and Metso crushing & screening equipment • Fault finding on hydraulic, mechanical and electrical systems • Planned maintenance and breakdown support across customer and site locations • Ensuring all work is completed safely and to manufacturer standards • Liaising with site teams and management to minimise equipment downtime The Candidate • Proven experience working on crushing and screening equipment • Strong knowledge of mobile plant machinery within aggregates, recycling or quarrying environments • Good mechanical, hydraulic and electrical fault finding skills • Ability to work independently across multiple sites • Full UK driving licence What's on Offer • £23ph to £25ph • Plenty of overtime available • Company vehicle • Long term stability with a respected business in the sector • Opportunity to work with high quality equipment If you are an experienced Crushing & Screening Engineer looking for a new opportunity in the South West, please apply or contact NEOS Engineering Recruitment for more information.

South West England

£22.50ph to £23.50 per hour + Overtime + Company Vehicle + Benefits

NEOS Engineering Recruitment are working with a well-established and highly respected civil engineering and earthworks contractor, who are looking to appoint an experienced Lead Heavy Plant Engineer to support their operations across the South West.

This is a fantastic opportunity for a senior engineer who enjoys responsibility, variety and working on a wide range of machinery while supporting a busy fleet that is critical to major infrastructure and earthworks projects.

The successful candidate will be responsible for maintaining, diagnosing and repairing a fleet of heavy plant equipment including ADT’s, dumpers, excavators and other large earthmoving machinery. You will play a key role within the engineering function, ensuring machines are maintained to a high standard, faults are diagnosed efficiently and downtime across the fleet is kept to an absolute minimum.

The ideal candidate will have strong mechanical and electrical diagnostic skills, previous experience working on heavy plant equipment and be confident working independently while supporting the wider engineering team. Experience working on equipment such as Volvo, CAT, Komatsu, Hitachi or similar OEM machinery would be highly beneficial.

The Role

• Service, maintenance and repair of heavy plant equipment
• Diagnosing mechanical, hydraulic and electrical faults
• Supporting engineering operations across the fleet
• Ensuring machinery uptime and reliability on busy projects
• Working on equipment including ADT’s, dumpers, excavators and associated plant

The Candidate

• Proven experience as a Heavy Plant Engineer
• Strong fault-finding and diagnostic capability
• Experience working on earthmoving machinery
• Ability to work independently in a fast-paced environment
• Full UK Driving Licence

This is a great opportunity to join a growing and highly respected contractor where engineers play a key role in keeping major projects moving.

If you are interested in finding out more, please apply or contact NEOS Engineering Recruitment for further information.