Please note this role is a 12 month FTC with future possibility of permanent employment.

Hybrid working available: Minimum 2 days onsite per week

We are seeking an Antenna Design Engineer to join a collaborative engineering team delivering innovative antenna and RF solutions.

You will be involved across the full product development lifecycle, from early bid support and requirements capture, through concept and simulation, to prototyping, verification, and production handover.

This is a hands-on role offering exposure to design, simulation, testing, and manufacturing within a supportive team environment.

Key Responsibilities

* Design and develop antenna and RF products

* Support new product development from concept through to production

* Perform requirements analysis and contribute to system-level design

* Conduct RF testing, validation, and optimisation

* Maintain and improve RF test facilities

* Produce technical documentation and design reports

* Support PCB design activities where required

Skills & Experience Required

* Strong understanding of RF theory

* Solid grounding in electromagnetic and circuit theory

* Experience in antenna design and passive RF/microwave circuit design

* Familiarity with electromagnetic simulation tools (e.g. CST, FEKO, HFSS)

* Experience using RF test and measurement equipment such as:

* Vector Network Analysers (VNA)

* Spectrum Analysers

* Experience working with antenna test ranges / anechoic chambers

* Degree in Electronic Engineering or related discipline (minimum HNC or equivalent considered)

* Competent IT skills (MS Office and general PC use)

We’re have an excellent opportunity for an expereinced Electronics Design Engineer to join a leading video technology company used by professional worldwide. As Electronics Design Engineer you will take ownership of hardware design work across the full product lifecycle — from early concept through to manufacture.

This role suits someone who enjoys solving complex engineering problems, working close to production, and seeing their designs become finished products.

What You’ll Be Doing

* Designing electronic systems from concept through to production-ready hardware

* Creating schematics and complex, multi-layer PCB layouts, balancing performance, signal integrity and manufacturability

* Developing and programming electronic components to meet functional and performance requirements

* Supporting prototype bring-up, debugging and fault-finding down to component level

* Contributing to system-level EMC design and validation, including pre-compliance activities

* Designing and building bespoke test equipment and fixtures to support development and production testing

* Supporting products through NPI and into volume manufacture

* Working closely with mechanical, firmware and manufacturing partners

* Collaborating with contract manufacturers to ensure smooth transfer from design to production

* Producing clear, structured technical documentation to support long-term product support

What We’re Looking For

* Proven experience in analogue and digital electronic design

* Strong schematic capture and PCB design skills, including dense or complex layouts

* Understanding of microprocessors, programmable logic and embedded electronics

* Practical experience debugging, validating and refining hardware designs

* Exposure to EMC design at system level

* Comfortable working to deadlines and balancing quality with delivery

* Methodical approach to documentation, testing and design records

* Confident communicator who works well in multidisciplinary teams

Nice to Have (But Not Essential)

* Experience with high-end PCB design tools

* Simulation tools (e.g. SPICE-based environments)

* Formal EMC, safety or environmental compliance testing

* HDL knowledge (e.g. VHDL)

* Experience working alongside mechanical CAD teams

If you enjoy hands-on electronics design, working close to manufacturing, and taking pride in robust, well-engineered hardware, apply now for consideration

Role: Mechanical Design Engineer
Start Date: ASAP
Location: Newmarket
Hours: Monday to Friday, 08:30 - 17:00 (early finish Friday)
Pay: £45,000 - £60,000 (DOE)
Contract: 12-Month Fixed Term (potential to go permanent)

A respected manufacturer in Newmarket is seeking a Mechanical Design Engineer to support a growing portfolio of RF and microwave projects. Working alongside antenna, mechanical and production engineers, you’ll be involved across the full product lifecycle, from requirements capture and simulation through to prototyping, testing and production handover.

Applicants must have access to their own vehicle.

With on-site manufacturing, you’ll see your designs move from concept to build, supporting high-spec antenna solutions across demanding applications.

Why Join?

Private Medical Insurance
* Pension scheme
* Full employee benefits package (pro-rata)
* Strong opportunity to move into a permanent role
* Involvement in end-to-end product development
* Supportive, collaborative engineering teamSalary & Hours:

£45,000 - £60,000 per annum (DOE)
* 12-month FTC with permanent potential
* Monday-Thursday: 08:30 - 17:00
* Early finish FridayWhat You’ll Be Doing:

Designing antenna and RF products (0.5 GHz - 40 GHz)
* Simulation work using CST Microwave Studio
* Supporting full development cycle from concept to production
* Testing using RF equipment (VNA, Spectrum Analysers)
* Requirements analysis and technical documentation
* Supporting PCB design and test facility improvementsWhat We’re Looking For:

Degree in Electronic Engineering (or related) - minimum HNC considered
* Minimum 1 year industry experience in antenna design
* Strong understanding of RF, electromagnetic and circuit theory
* Experience with electromagnetic solvers (CST preferred)
* Knowledge of microwave antenna types (omni, sector, directional, waveguide)
* Experience with RF test equipment and antenna test ranges desirable
* Self-motivated, proactive and able to work within a teamIf you’re a Mechanical Design Engineer ready to contribute to innovative projects and grow within a respected manufacturer, apply now or contact Brendan @ Prime Appointments for more information.

#SUFFOLKPERM

AI-powered smart manufacturing for biotech industrial applications
North Hertfordshire; £Competitive + Benefits Package
This company is building a manufacturing 4.0 platform. Working alongside established partners, their automated manufacturing system will provide an innovative solution to deliver new pharmaceutical products. Key to this is the interchangeable, modular system that allows for bespoke delivery for manufacture.
Due to the multiple parts of the platform, the company is hiring a Systems Development Integration Engineer to join their technical team. Working onsite at their dedicated offices and workspace, the Integration Engineer will play a pivotal role in bringing together hardware and software subsystems to integrate seamlessly. This will include extensive testing and experimental work for sub-systems, and be part of the development and verification of process standardisation.
Requirements:
* Degree in Mechanical or Electronics Engineering / Physics with demonstrable industry experience integrating complex electromechanical systems.
* Proficiency with one or more of the following software languages: Python, C++ or C# (ideally for hardware focussed applications).
* Good technical problem-solving skills including the ability to communicate solutions and describe problems to peers.
* Excellent documentation skills including for technical analyses and processing results.
* Additional experience with: industrial network communication protocols, robotic hardware prototyping, CAD, embedded software, electronic design, and software virtualisation would be highly desirable.
This is a multidisciplinary role, fitting a hybrid profile with key strengths and knowledge in several areas. Understanding how different components can work together is vitally important.
The role would be fully onsite. On offer is a competitive salary depending on experience and a wide range of employee benefits (significant employer pension contributions, private medical insurance, life insurance and vehicle / travel schemes).
No company sponsorship is available – interested applicants must have full rights to work in the UK, and not be on restricted work visas.
Another top job from ECM, the high-tech recruitment experts.
Even if this job’s not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call ecm or email your CV. We will always ask before forwarding your CV.
Please apply (quoting ref: CV27523) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate

Who we are:

Filtronic is a leading designer and manufacturer of high-performance radio frequency (RF), microwave, and millimetre-wave (mmWave) subsystems, specialising in mission-critical communication networks. Since 1977, we have built a strong reputation as trusted partners to global technology leaders across the telecommunications infrastructure, aerospace and defence, space, and critical communications sectors. Our legacy of innovation and engineering excellence has positioned us at the forefront of advanced connectivity solutions worldwide, and we continue to grow as we deliver cutting-edge technology for some of the most exciting programmes in the industry.

The Senior RF mm/Wave Engineer plays a key role in the design, development, and delivery of high-performance RF and mmWave products and solutions. This role involves advanced technical expertise in RF/microwave engineering, hands-on design and test, problem-solving, and close collaboration with cross-disciplinary teams to ensure successful project execution.

The Senior RF Engineer is responsible for delivering robust RF designs, supporting technology development, maintaining high engineering standards, and contributing to the company’s product roadmap.

Technical:

* Lead the design, simulation, and development of RF and mmWave circuits, components, and subsystems

* Conduct RF system analysis, performance optimisation, and troubleshooting of complex designs

* Carry out RF measurements, characterisation, and validation of prototypes and production hardware

* Develop and maintain detailed technical documentation, including design reports, test plans, and results

* Ensure designs meet required specifications, standards, and customer requirements

* Contribute to technology and product roadmaps with innovative RF design solutions

* Support RFQs, proposals, and customer engagements with technical input where required

Project & Product Management:

* Work with project managers and engineering leads to deliver designs on time, within budget, and to agreed quality standards

* Support the transition of designs from concept through prototyping into volume manufacturing

* Collaborate with process engineering and operations to ensure manufacturability and yield of RF products

* Assist in risk identification and mitigation during the design and development process

Collaboration & Communication:

* Work closely with electronics, mechanical, software, and systems engineers to deliver integrated solutions

* Provide technical expertise and support to internal and external stakeholders, including customers

* Present technical work and project updates to peers, management, and customers as required

The above provides an overview of the key responsibilities for this role; however, duties may evolve to meet the needs of the business and customer requirements.

Please call our Talent Partner, Bruce Mair on (phone number removed) (anytime) if you would like to chat about this role or clarify the salary and benefits prior to investing your time applying.

Filtronic plc is an equal opportunities employer and is committed to building a diverse and inclusive workplace where everyone can thrive. We welcome applications from all qualified candidates regardless of age, gender, ethnicity, religion, sexual orientation, or disability status. If you require any adjustments or accommodations to support you during the interview process, please let us know and we will be happy to assist

DCS Control, Server & Telecoms Panel Design Engineer • Assist with the hardware scope of project quotations. • Review project proposals and customer specifications, to ensure the agreed hardware design is achieved. • Liaise with the customer & our internal project team, to ensure a projects delivery milestones are met. • Purchase the necessary equipment required on a project • Produce hardware design documentation, to allow our Assembly department to manufacture the cabinet / panel, to a projects required specifications (General arrangement / detailed layout drawings, electrical diagrams, equipment / wiring schedules, power & heat calculations etc.). • Make use of existing hardware designs where possible, to streamline the design process. • Maintain hardware design documentation, during a projects lifecycle. Track changes, update as required and ensure all departments have the latest copies. • Liaise with the Panel Build technicians / Inspection departments, to allow for a smooth transition during a projects lifecycle. • Be prepared to undertake site surveys (Both onshore and offshore) (Offshore training will be available for the right candidate). Tool Knowledge: • Microsoft Office (Word, Excel etc). • AutoCAD. Hybrid working arrangement. 37.5 hours per week. With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients

Cambridgeshire
Up to £75,000

Do you want to work within a business that operates like a consultancy, but is a global brand and solves complex issues within a vital industry? Well this could be the right place for you…!

The business;

The group are a leading water solutions innovator, operating globally, however you will be working for one of its key brands, who are set up similar to a consultancy business and are experts in electronics, physics, mechanics and software. The electronics team within the business are a small close-knit team looking for another senior member to help lead the way.

The business drive a forward thinking, collaborative environment where they want their team to be inquisitive and curious about how to come up with solutions. If you have always been pigeonholed within your previous roles and want to continue to be so, then this company won’t be right for you! If you want to learn about other areas of the business, to be able to have technical conversations with cross functional engineers and generally be creative, then read on.

The role;

You will be the senior member of the engineering team, focusing on electronics. You will be responsible for analog design, PCB layout as well as all the hardware aspect of power electronics and power management systems. This role will be office based, but does involve regular touch points with customers, virtually and in person! So being happy to be customer facing is important within this position.

What we need from you;

Strong Electronics Engineering background, including an electronics focused degree
3-6 years electronics experience, ideally within a consultancy business
Knowledge of analog design as well as embedded system hardware design

This role is not to be missed! Click apply and Chris Smith will be in touch with the details. CV not up to date? Don’t worry, he can assist with that

Position: Electrical Design Engineer

Location: Cambridgeshire

Salary: £45,000 to £55,000 + Excellent Benefits / Prospects (including Bonus etc…)

If there is something stopping you from achieving all you’re capable of, you’ll relish a role with a company that will positively encourage you to be pro-active – a real opportunity to release your true potential.

The Company: Our Client, an innovative dynamic passionate Company that manufactures UV lamps for the printing industry and other applications. Their high-quality photonic solutions provide improved process reliability, and more innovation in industrial manufacturing, scientific, and medical applications.

Due to sustained continued expansion they now require an Electrical Engineer working within the Product Development group to deliver electrical and subsystem designs to enable the development of new system products from concept through to final market release

The Person: Candidates suitable for consideration should be able to provide evidence of the following:

* A HNC / HND or Degree in Electrical Engineering or a related discipline

* Experience in electrical system design (IEC (phone number removed)

* Experience in safety design (ISO (phone number removed) & (phone number removed)

The successful candidate will enjoy a salary of between £45,000 to £55,000 (DOE) + Excellent Benefits / Prospects, an employment package that you would expect from a company that values its employees.

Do you have the courage to take on this challenge?

We’re hiring an RF Engineer to work on cutting-edge RF and mmWave technologies within a highly capable engineering team. This is a hands-on role focused on design, testing, and problem-solving, contributing directly to the delivery of robust, real-world RF products.

You’ll take ownership of RF design activities while working closely with a broad group of engineers to bring concepts through to production-ready solutions.

Your day-to-day

* Design and simulate RF and mmWave circuits, modules, and subsystems

* Analyse system-level performance, optimise designs, and troubleshoot complex RF issues

* Carry out RF measurements, characterisation, and validation on prototypes and production hardware

* Create and maintain clear technical documentation such as design notes, test plans, and reports

* Ensure solutions meet performance targets, compliance requirements, and customer needs

* Feed innovative ideas into future product and technology development

* Provide technical support during customer discussions, bids, and proposal activity when needed

From concept to production

* Deliver RF designs in line with project schedules, cost targets, and quality expectations

* Support design maturation from early prototypes into volume manufacture

* Work with manufacturing and process teams to ensure designs are buildable, repeatable, and high quality

* Identify technical risks early and help drive mitigation throughout the development lifecycle

Working with others

* Collaborate closely with electronics, mechanical, software, and systems engineers

* Act as a technical reference point for internal teams and external partners

* Share progress and technical outcomes through design reviews and project updates

Technical & Design Engineer – Wisbech – Competitive Salary
Are you an innovative Technical & Design Engineer with a strong manufacturing background and a passion for developing high-quality engineered products? This is an exciting opportunity to join a forward-thinking product development environment where you will play a key role in enhancing existing product ranges, supporting manufacturing operations, and delivering technical excellence to customers and internal teams alike. Reporting to the Technical Director, you will be instrumental in driving design improvements, ensuring compliance standards are met, and supporting production through effective CAD and CAM processes.

Technical & Design Engineer’s Key Responsibilities:

Carry out CAD design work to enhance and develop existing product ranges.
Control and manage drawing revisions and storage to ensure accurate documentation and traceability.
Provide CAM support to the production department to ensure smooth manufacturing processes.
Write and update operator manuals and parts books, ensuring compliance with CE/UKCA standards.
Provide technical support to customers, dealers, and internal teams, including occasional travel to exhibitions and key accounts.
Skills & Experience Required as a Technical & Design Engineer:

Proven experience within a design and manufacturing environment.
Competent in CAD software (SolidWorks or similar) with experience producing detailed manufacturing drawings.
Strong mechanical and engineering knowledge, ideally within sheet metal fabrication.
Understanding of sheet metal flat pattern development and bend allowance data.
Excellent communication skills with the ability to present technical solutions clearly and work both independently and as part of a team.
Benefits Package:

Competitive remuneration package.
25 days holiday plus Bank Holidays.
Ongoing training and development opportunities.
Opportunity to work within an innovative product development environment with scope for progression.
If this Technical & Design Engineer role sounds like a position that would match your skills and experience, we would love to hear from you and look forward to discussing your application in more detail.
Anne Corder Recruitment Ltd acts as an employment agency for permanent recruitment and as an employment business for the supply of temporary workers. By applying you will be registered as a candidate with Anne Corder Recruitment Ltd, your personal data may be added to our database as part of the application process. Our privacy policy is available on our website and explains how we will use your data.
Your details will be reviewed by one of our Recruitment Partners and we will contact you again within 5 working days if your application is to be progressed further. INDEEDENG

Device Packaging Engineer (Hybrid)

Cambridgeshire
£60,000 – £80,000 (Negotiable) + 20% Bonus + Car/Allowance + Relocation + Excellent Benefits

Ready to take ownership of packaging strategy within a global medical technology business?

An established and fast-growing medical device manufacturer is seeking a Device Packaging Engineer to lead packaging specification, development, validation and testing activities across medical devices and combination products.

This is a high-visibility role offering genuine autonomy, influence and long-term progression within a business that invests heavily in its people.

The Opportunity

You will take overall responsibility for:

* Medical device & combination product packaging specification

* Design development & validation testing

* Packaging compliance within regulated environments

* Continuous improvement of packaging performance, cost and reliability

* Cross-functional collaboration across Quality, Regulatory, Manufacturing and R&D

This is a hybrid position offering flexibility while remaining closely connected to innovation and manufacturing teams.

What We’re Looking For

✔ Degree qualified (Engineering, Science, Product Design) or time-served Engineer with strong industry experience
✔ Experience working within ISO 13485 and cGMP regulated environments
✔ Proven track record developing packaging for medical devices and/or combination products
✔ Strong understanding of validation, testing and compliance requirements
✔ Confident communicator able to work cross-functionally

What’s On Offer

* £60,000 – £80,000 basic (negotiable depending on experience)

* 20% bonus

* Car or car allowance

* Relocation assistance

* Excellent wider benefits package

* Real progression within a global organisation

If you’re looking for a role where you can genuinely influence packaging strategy rather than simply maintain it — this is worth a confidential conversation

Principal DSP Engineer | Cambridge
We’re looking for an expert to ensure best-in-class audio clarity, loudness, and performance in challenging, noisy environments.
Responsibilities as a Principal DSP Engineer:
* Design the complete acoustic path for new products to meet aggressive audio targets
* Implement, tune, and optimise DSP algorithms like noise suppression, echo cancellation
Requirements:
* 5+ years of professional experience in audio product development, with a strong focus on micro-acoustics
* Deep understanding of electro-acoustic transducers
* Proven experience with acoustic simulation software (COMSOL, FEA)
* Proficiency in a programming/scripting language (MATLAB, Python) for data analysis
Nice to have skills for a Principal DSP Engineer:
* Experience tuning DSP algorithms on embedded platforms
* Knowledge of RF/EMI shielding for audio circuits
* Familiarity with wireless protocols (DMR, P25, LTE)
Comprehensive benefits package:
* Private health & dental care
* Enhanced pension contributions
* Flexible working hours
Apply now to change the direction of audio DSP engineering in the heart of UK audio innovation

Take the initiative in developing reusable RTL for implementing clever algorithms

For this role, we are seeking an academically bright candidate, PhD-qualified in a numerate stem subject such as physics, maths, electronics, or electronics, and some existing knowledge of digital electronics. You would be joining an expert Cambridge-based team, designing, optimising, and verifying a wide array of reusable logic blocks to implement mathematical algorithms and other common digital functionality. You would have a high degree of ownership in planning and progressing your work.

This role is with a leading technology company, with a relaxed and informal working environment, and excellent remuneration package.

You will need:

* An outstanding academic record with a relevant PhD, a bachelor’s from a top university, and mostly A*s and As at A-level (or equivalent).

* Excellent numerical, algebraic, and logic skills, and understanding of areas such as how computers internally represent and manipulate numbers. Skills in System Verilog, Verilog, VHDL, or coding skills in C++ would be advantageous.

* You must have full, existing, and unrestricted right to work in the UK without time limit or the need for sponsorship.

This is a great opportunity to join a leading employer in the high technology sector, where you can build your skills, gain experience, and work on technological challenges whilst learning from expert colleagues. A competitive salary and benefits package are on offer to the successful candidate.

Keywords: PhD, RTL, VHDL, Verilog, System Verilog, Digital Logic Design, Verification, Cambridge

Another top job from ECM, the high-tech recruitment experts.

Even if this job’s not quite right, do contact us now - we may well have the ideal job for you. To discuss your requirements call ecm or email your CV. We will always ask before forwarding your CV.

Please apply (quoting ref: CV27603) only if you are eligible to live and work in the UK. By submitting your details you certify that the information you provide is accurate

Location: South Cambridge

Reporting to: Head of Manufacturing

Role Overview

This is a hands-on Production Engineer role supporting the continued development of a production engineering function within a manufacturing environment. The position focuses on improving manufacturing efficiency, maintaining high quality standards, and supporting the release and manufacture of new products. The role involves close collaboration with production, supply chain, and R&D teams, as well as responsibility for tooling, equipment support, and technical drawing output.

The ideal candidate will also have some experience with CAD Design/SOLIDWORKS. The company can offer a competitive salary and a range of benefits.

Key Responsibilities

Production Support & Collaboration

Work closely with production, assembly, supply chain, and R&D teams to resolve manufacturing issues
Support delivery capability for in-house manufactured products
Manage production engineering projects and lead weekly engineering meetingsTooling, Equipment & Infrastructure

Design, implement, and project-manage jigs, fixtures, and tooling
Liaise directly with suppliers when required
Troubleshoot production equipment and infrastructure issues
Maintain jigs and tools to ensure operational efficiency
Ensure preventative maintenance schedules are in place and followed
Manage and maintain 3D printing capabilitiesContinuous Improvement

Support continuous improvement initiatives
Identify and implement productivity, quality, uptime, and profitability improvementsTechnical Drawings & Documentation

Produce 3D CAD models and manufacturing drawings using SolidWorks
Support custom product requirements and liaise with customers when required
Troubleshoot mechanical and electronic assemblies
Support maintenance of product safety approvals and documentation
Promote and comply with all Health, Safety and Environmental requirementsExperience & Skills

Minimum 5 years’ experience in a production engineering role
Experience using CAD software (SolidWorks or similar)
Understanding of quality systems within manufacturing
Experience with ERP and/or MRP systems
Excellent organisation, planning, and time management skills
Hands-on, adaptable, and solution-focused approach
Able to work independently and as part of a teamSounds good, how do I apply?

Option 1: Click the apply button, don’t worry if you don’t have an up-to-date CV, we can discuss whatever you have to hand.
Option 2: Find Morgan Veness on LinkedIn and drop me a message or connection request

About Us

We are dedicated to fostering a diverse and inclusive community. In line with our Diversity and Inclusion policy, we welcome applications from all qualified individuals, regardless of age, gender, ethnicity, sexual orientation, or disability. As a Disability Confident Employer, and part of the Nicholas Associates Group, we are committed to supporting candidates with disabilities, and we’re happy to discuss flexible working options.

We are committed to protecting the privacy of all our candidates and clients. If you choose to apply, your information will be processed in accordance with the Nicholas Associates Group of companies

Do you have experience as a Maintenance Engineer?
Position: Maintenance Engineer
Location: Outskirts of Newmarket, Suffolk
Salary: DOE
Hours: Monday to Saturday (potential overtime available and Sundays if on call)
Contract Type: Full time, permanent
An opportunity has arisen for a Maintenance Engineer for our client based near Newmarket, Suffolk.
As a Maintenance Engineer you will be responsible for:
* Proactively complete maintenance, servicing, and administrative tasks under the direction of the Maintenance Lead to maintain operational efficiency
* Work closely with cross-functional departments to ensure operational priorities are aligned and client expectations are met at all times
* Coordinate with employees and suppliers to clarify maintenance requirements and ensure timely task completion
* Adhering to H&S policies at all times.
An ideal candidate for the Maintenance Engineer will have:
* Demonstrate knowledge of working with hazardous materials and the risks involved
* Working knowledge of tool craft equipment, including grinding and welding
* Confident in using computers and standard workplace software.
Interviews will take place in near Newmarket, Suffolk following a registration process by PureKat Consultancy Ltd. If we have not responded to your application within 3-5 days, unfortunately you have not been successful on this occasion, but please feel free to contact us for other opportunities. PureKat Consultancy is acting as an Employment Agency for permanent vacancies and as an Employment Business for temporary vacancies

These systems are engineered to reduce energy waste, improve process reliability, and drive innovation across markets such as UV disinfection for food and beverage production and fast, high-temperature heating solutions for the composites industry.

We are looking for an Electrical Design Engineer to play a key role in developing the next generation of these niche & bespoke systems on a global scale!

As an Electrical Design Engineer, you will be responsible for the design and development of electrical circuitry supporting both manufacturing and advanced systems development. You will take ownership of electrical system designs and contribute hands-on expertise throughout the product lifecycle.

Job Responsibilities:

* Lead electrical system designs from concept through implementation

* Take a hands-on approach to the build, test, and validation of designs

* Support the development of xenon flashlamp systems

* Provide technical support for existing products in the field

* Mentor and support junior engineers

* Liaise with sub-contract suppliers and external partners

Experience required:

* Degree (or equivalent) in Electrical or Electronic Engineering

* Proven experience in electrical system design (IEC (phone number removed)

* Experience in safety design (ISO (phone number removed) & ISO (phone number removed)

* Well-organised approach to revision control and documentation

* Excellent communication skills and ability to work effectively in a team

FPGA Design Engineer - Cambridge

A growing engineering and technology business based in Cambridge is looking to hire an FPGA Design Engineer to join their established FPGA Design team.

This is a fantastic opportunity to work on highly advanced imaging and electronic systems that are used globally within demanding environments. The role will see you contributing to the development of reusable FPGA modules that are used across a wide range of products, working closely with hardware, software and mechanical engineering teams to bring new technology to market.

The Role - FPGA Design Engineer - Cambridge

As part of the FPGA Design team, you will be responsible for designing and verifying FPGA modules and contributing to a shared design library used across multiple products.

You will also be involved in writing timing constraints, analysing timing reports and modifying designs where required to ensure timing closure.

The position offers the opportunity to work on technically challenging products within a collaborative engineering environment where innovation and engineering best practice are highly valued.

Key Responsibilities - FPGA Design Engineer - Cambridge

• Developing FPGA modules using SystemVerilog
• Contributing reusable modules to a shared FPGA design library
• RTL verification and validation
• Writing and managing timing constraints
• Reviewing timing reports and modifying designs to close timing
• Designing with a focus on low power optimisation
• Writing and reviewing module specifications
• Conducting code and documentation reviews
• Writing code in line with company coding standards
• Collaborating with hardware, software and mechanical engineering teams

Skills & Experience - FPGA Design Engineer - Cambridge

• Strong experience with SystemVerilog
• Experience with Python
• RTL verification experience
• Experience writing and managing timing constraints
• Understanding of timing analysis and timing closure
• Experience designing for low power

You should also be comfortable working with:
• Linux command line
• Version control systems such as Git or SVN
• Markdown documentation

Experience with cocotb Python verification library would be beneficial but is not essential.

About You - FPGA Design Engineer - Cambridge

You will be someone who enjoys working within a collaborative engineering team and is committed to writing high quality, maintainable FPGA code. You will be comfortable following established frameworks while also contributing ideas that improve the overall engineering capability of the team

JTH Recruitment have been appointed to recruit for our IT client based just outside of Peterborough. This a great role for someone looking to embark on a career in IT so if you like building and repairing IT equipment and computers this would be an ideal role. Some customer service and team work experience would be advantageous.

The client are offering a competitive salary, bonuses and is a great place to work. There is also ongoing support and development.

THE ROLE

The main task will be the building of touchscreen EPoS systems ready to be installed by their team of engineers across the UK.

WHAT YOU LL BE DOING

System builds

• Pre-install scanner set-up.
• Disk and Hotkey set-up.
• Till and peripheral building/testing prior to installation.
• Liaise with front office for installation dates.
• Work closely with the installation engineers and customer support to ensure every installation runs smoothly, on time and with the correct equipment.
• Stock Shipping of replacement parts as required, on time and to the correct address.
• Recording/allocating stock serial numbers
• To keep the stock room/build area clean and tidy.
• Report stock shortages to hardware manager.
• Stocktaking on a bi-weekly basis.

General Duties

Cleaning of second hand/returned equipment.

Repair faulty equipment if possible.

Test repaired equipment.

Chase customers for return of loan/faulty equipment.

Postage

YOU SHOULD APPLY IF:

• You have a full clean driving licence.
• You have previous experience of working as part of a team.
• Demonstrable organisational skills, including time management, prioritisation of tasks and selfmotivation.
• Strong work ethic, requires high standards of self-motivation, able to be flexible in order to get the job done, able to work under pressure when deadlines approach.
• You are a confident and clear communicator.
• You have an excellent professional manner at all times.
• You are hardworking and committed, with a sense of humour.

Product Development Engineer

Role location: Cambridge, UK

Discover a career with real meaning. One that offers the opportunity to showcase your talents, achieve measurable success and gain immense satisfaction by shaping the future of cancer care.

At Endomag, a Hologic company, we’re redefining cancer treatment and empowering clinicians worldwide with innovative medical solutions.

We’re now looking for a talented Product Development Engineer to join our dynamic team in Cambridge —someone who thrives on solving complex challenges, driving excellence, and making an impact that truly matters.

As Product Development Engineer at Endomag, a Hologic company, you will play a critical role in our development programs with a focus on hands on mechanical design and development of components, instruments, sub-assemblies and disposable devices within our Breast Surgery product portfolio. You will define requirements, design and prototype solutions, and lead verification/validation activities within a regulated environment (ISO 13485). You will collaborate closely with a network of third-party suppliers, contract development organisations, consultants and internal cross functional teams to deliver innovative, compliant and manufacturable products.

KEY RESPONSIBILITIES

• Own mechanical design of product and sub-assemblies from concept through detailed design, prototyping and verification/validation, ensuring safety, performance and manufacturability
• Perform mechanical architecture, materials selection, tolerance analysis (GD&T). Design for manufacture, assembly and serviceability; generate CAD models and drawings
• Project manage work streams: build and track plans, risks and budgets, drive decisions, report status, ensure delivery to ISO 13485 design controls
• Lead relationships with external partners (suppliers, consultants, contract manufacturers)
• Ensure robust risk management (ISO 14971) and compliance with relevant standards
• Collaborate closely with cross-functional teams including Product Engineering, Quality, Marketing, Regulatory Affairs, and our Implantables Team.
• Prepare and maintain detailed documentation for all design and development activities including design specifications, test protocols and compliance reports.

KNOWLEDGE, SKILLS & EXPERIENCE

• Educational background in Mechanical Design, Materials Engineering, (or a related field) or equivalent experience in mechanical product development within regulated industries
• Knowledge of CAD (e.g. SolidWorks), GD&T, materials and plastics selection, tolerance stack-ups, DFM/DFA
• Project management skills—able to plan, prioritise, and keep teams on track and experience leading external suppliers/contractors
• Experience with design verification and validation, and working through product development phases
• Working knowledge of ISO 13485, ISO 14971, ISO 10993, IEC 62366
• Excellent problem-solving and communication skills and a collaborative team spirit
• Eager to learn, with a drive for continuous improvement

Ready to Make an Impact?

If you have the right skills and experience and want to join our team, apply today. We can’t wait to hear from you!

Innovate with Purpose: Work at the forefront of life-changing medical technology.

Collaborative Culture: Join a friendly, supportive team where your contributions matter.

Personal Growth: Expand your skills in a fast-growing, global company.

#LI-KP1

#associate

An exciting opportunity has arisen for a Battery Systems Engineer to join a pioneering startup developing next generation battery technology. This is a hands on role for someone who loves building, testing and iterating quickly. You’ll take ownership of battery pack design from concept through to flight, working collaboratively within a fast moving, inventive engineering team.

The Battery Systems Engineer will:

• Design and develop lightweight, high performance battery packs for drone applications.
• Create and implement effective thermal management solutions for performance and safety.
• Assemble prototype packs in-house and support development toward manufacturable designs.
• Design and integrate power electronics and BMS hardware within the overall system architecture.
• Establish and run test programmes for performance, cycle life, thermal behaviour and safety validation.

The Battery Systems Engineer will have:

• A hands on, practical approach with enthusiasm for building, testing and improving hardware.
• A degree in Electrical Engineering, Mechanical Engineering or a related discipline.
• 3+ years’ experience working on battery systems, including pack design and power electronics.
• Strong understanding of BMS architecture, protection strategies and charge/discharge behaviour.
• Experience with PCB design tools (Altium, KiCAD or similar).

If you enjoy end to end ownership, thrive in a collaborative startup environment and want to help develop cutting edge battery systems for next generation flight, this role offers the chance to make a real impact. Apply online and we will be in touch!

NEW CONTRACT ROLE - FIELD SERVICE TECHNICIAN (LEVEL 2 - HARDWARE BREAK/FIX) - ASAP START

Field-Based - PE & CB Postcode AreasTo apply:

THE OPPORTUNITY

We are seeking a Level 2 Field Service Technician to deliver scheduled onsite hardware repair services across PE & CB locations. This role involves daily travel (50%+), working independently across multiple customer sites.

THE ROLE

• Diagnose, troubleshoot, repair and maintain HP & Lenovo laptops and desktops
• Perform full device strip-downs, component-level replacements and rebuilds
• Carry out scheduled onsite hardware break/fix visits
• Follow strict parts processes and return procedures
• Manage tickets and updates via phone, email and internal systems
• Escalate service delivery issues appropriately
• Maintain tools and testing equipment
• Work independently across field locations
• Lift and carry equipment up to 25kg where required

This is a field-based role with periods of driving.

REQUIREMENTS

• Minimum 3 years’ hands-on hardware repair experience (desktop/laptop)
• Proven field break/fix experience (HP & Lenovo essential)
• Strong diagnostic and troubleshooting capability
• Comfortable working independently
• Willingness to travel 50%+ daily
• Valid UK driving licence and good driving record required

TO BE CONSIDERED

Email your CV and availability to:

PLEASE NOTE

This is NOT a deskside support role.

We require experienced field hardware break/fix engineers with proven experience repairing HP and Lenovo laptops and desktops.

Candidates who have only carried out basic deskside tasks (e.g. battery or keyboard swaps) will not be considered.