Electronics Tester - MUST HAVE SC CLEARANCE - Portsmouth - 9 months+/RATE: £254 per day inside IR35

(Test, Tester, Testing, Test Engineer, Test Specialist, Test Analyst, Test Consultant)

One of our Blue Chip Clients is urgently looking for an Electronics Tester.

Please find some details below:

Clearance required: SC cleared - UK Sole National

Portsmouth office 5 days a week and involves working in rotational shifts (6:00 AM-2:00 PM/2:00 PM-10:00 PM)

IR35 Status: PAYE via Umbrella company only

Job Description:

? Install test equipment and perform test on systems/subsystems to ensure their behaviour are according to the specifications.
? Perform trouble-shooting and first level Quality inspection
? Specimen to be tested, test procedures, test facilities and when needed, calibrated sensors and installation procedures.
? Test completion and associated documentation (test report delivery, anomalies reports ).

In this role you will play a key role in:
test facilities preparation,
sensors calibration,
testing documentation and report preparation
first level quality inspection of specimen undergoing test
initial troubleshooting in case of faults identified

Your profile
Aolid understanding of latest system testing methodologies.
Proficiency in using testing tools (Rf simulator, Spectrum Analyser).
Ability to organise own activities to match project timeline and track bug to closure

Please send CV for full details and immediate interviews. We are a preferred supplier to the client.

Rate: £230 - £250 a day
IR35 status: Inside IR35
Clearance required: SC clearance required
Location: Portsmouth - onsite 5 days per week - Portsmouth office 5 days a week and involves working in rotational shifts (6:00 AM-2:00 PM/2:00 PM-10:00 PM)

You will join a global IT Consultancy, working at their prestigious end client.

You will:

• Install test equipment and perform test on systems/subsystems to ensure their behaviour are according to the specifications.
• Perform trouble-shooting and first level Quality inspection
• Specimen to be tested, test procedures, test facilities and when needed, calibrated sensors and installation procedures.
• Test completion and associated documentation (test report delivery, anomalies reports).

In this role you will play a key role in:

• test facilities preparation,
• sensors calibration,
• testing documentation and report preparation
• first level quality inspection of specimen undergoing test
• initial troubleshooting in case of faults identified

Your profile

• Solid understanding of latest system testing methodologies.
• Proficiency in using testing tools (Rf simulator, Spectrum Analyser).
• Ability to organise own activities to match project timeline and track bug to closure

We are seeking a proactive Test Engineer - Data to join our Data Finance team. In this role, you will partner with engineers and product managers to enhance the quality, reliability, and trustworthiness of financial data flows and data products. You will not just test for the team, but with the team, coaching engineers to own their quality outcomes.

Location:Manchester(2 Days per week in the office)

Duration: 6 Months

Key Responsibilities

• Strategy & Coaching: Set a strong testing strategy in line with organizational quality standards and coach teams on data testing practices.
• Data Validation: Design and implement effective validation for data pipelines, APIs, and services to ensure data is correct, complete, and timely.
• Observability: Drive observability using monitoring, alerts, and dashboards to validate behavior and data quality in production.
• Compliance: Operationalize requirements from regulated environments (e.g., SOX, GDPR/PII, DMA) into daily test strategies and documentation.
• Automation: Design test approaches covering unit, component, contract, and integration levels, ensuring validation is integrated into CI/CD pipelines.

Required Skills & Qualifications

• Data Testing: Proven experience testing data-intensive backend systems, ETL/ELT processes, and financial data feeds.
• SQL Mastery: Strong proficiency in relational databases, ideally Microsoft SQL Server, including writing and optimizing complex SQL for data investigation.
• Technical Ecosystem: Experience with modern engineering tools such as Git, $CI/CD$, Docker, Kubernetes, and AWS (or similar cloud platforms).
• Regulatory Knowledge: Experience working in or around regulated environments (SOX, GDPR, DMA) or a strong willingness to learn.
• Communication: Exceptional ability to explain technical testing and data quality concepts to both technical and non-technical stakeholders.
• Problem Solving: Ability to use structured root-cause analysis (e.g., “5 whys”) to debug complex data issues.

Randstad Technologies is acting as an Employment Business in relation to this vacancy.

The Lead Verification and Validation Engineer ensures the verification and validation of HVDC Control Systems by designing, developing, and executing tests on Controls Software. The role ensures both that the software is built correctly and that the correct software is built, aligned with customer and project requirements.

Essential Responsibilities

• Design and create test cases based on software requirements.
• Execute test procedures and provide clear, structured reporting of results.
• Review and analyse test results, reporting status, and findings.
• Communicate failures and issues to relevant engineering teams with clarity and accuracy.
• Understand key project plan milestones and ensure required testing activities are properly scheduled.
• Support continual improvement efforts by introducing new tools, methods, and process enhancements in collaboration with Continuous Improvement leaders.
• Promote a standard product methodology mindset, identifying opportunities for solution re-use and improving quality, reliability, and delivery timelines.
• Lead the Factory Acceptance Test (FAT) with clients.
• Conduct gap analysis between standard/design requirements and customer technical requirements, defining associated test needs.
• Provide expertise on control system requirements for RTDS lab setups, including AC/DC interface requirements, Plant Emulator interface needs, and power system modelling and verification in RSCAD.
• Apply strong problem-solving capabilities to support test execution, lab setup issues, and debugging challenges.

Qualifications/Essential Requirements

• Engineering degree (or equivalent), including power systems and power electronics subjects or proven equivalent HVDC knowledge and experience.
• Strong understanding of the Software Development Life Cycle, particularly the V-Model.
• Demonstrated problem-solving skills, especially in test environments, lab setups, and debugging.
• Strong sense of urgency with the ability to identify and manage technical risks.
• Excellent written and verbal communication skills.
• Ability to interpret and understand detailed software requirements.
• Understanding of the functional characteristics of power systems.
• Ability to work under pressure and meet deadlines while maintaining safety, quality, and engineering integrity.
• Flexibility regarding working hours.

Desired Characteristics

• Experience with Agile or Scrum methodologies.
• Familiarity with Jira.
• Experience with test management tools.
• Proficiency in Microsoft Excel, PowerPoint, and Word.
• Knowledge of HVDC control systems, protection, and sequencing strategy.
• Understanding of HVDC station equipment and interlocking design.
• Experience with PSCAD/RSCAD dynamic performance studies.
• Knowledge of Line Commutated Converters (LCC) or Voltage Source Converters (VSC).
• Experience with tools such as MATCAD, PSCAD, PSS/E, RSCAD, MATLAB, etc.
• Knowledge of applicable electrical standards (eg, IEC 61850, IEC 62351, IEC 12207, IEEE 15288, IEC 25010, IEC 27032, NERC/CIP).
• Previous experience in the HVDC industry.

£600-670 GBP
Onsite WORKING
Location: Central London, Greater London - United Kingdom Type: Contract

Agentforce Developer

Location: London (Remote)

Contract Type: 6 Months

Clearance: SC Clearance

Salary: 600-670 (Inside IR35)

About the Role

We are looking for a highly skilled Agentforce Tester to join our growing team. In this role, you will ensure the quality, reliability, and performance of AI Agents built on the Agentforce platform. You will test conversational flows, validate agent behaviour, identify defects, and play a key role in shaping the performance and safety of next-generation AI systems.

This position will see you working closely with developers, product owners, and business stakeholders to enhance agent accuracy and customer satisfaction.

Key Responsibilities

Testing & Quality Assurance

• Design, execute, and document detailed test plans and test cases for AI agents.
• Perform manual and automated testing across conversational flows, integrations, APIs, and user journeys.
• Validate agent accuracy, intent recognition, response quality, and adherence to safety and business rules.
• Conduct regression testing following updates or retraining cycles.
• Test agents across multiple channels (web, mobile, CRM, chat widgets).

Defect Identification & Resolution

• Log defects with clear reproduction steps and diagnostic detail.
• Collaborate closely with engineering teams to troubleshoot and validate fixes.
• Identify edge cases, requirement gaps, and possible failure points.

Data & Performance Analysis

• Analyse conversation logs to detect issues, misclassifications, and optimisation opportunities.
• Monitor key performance metrics including accuracy, latency, handoff rates, and customer satisfaction.
• Provide insights to improve training data, prompts, and configuration.

Compliance & Safety

• Ensure agents follow security, data-handling, and responsible-AI standards.
• Validate that responses avoid prohibited content and satisfy safety guardrails.
• Support audits and maintain documentation for testing coverage and release readiness.

Collaboration & Continuous Improvement

• Work alongside Product, Engineering, and SMEs to align testing with requirements.
• Contribute to testing frameworks, automation tooling, and best practices.
• Participate in agile ceremonies and cross-functional working groups.

Required Skills & Experience

• Proven experience in software testing, QA, or conversational AI testing.
• Strong knowledge of testing methodologies (functional, regression, exploratory, UAT).
• Understanding of AI/ML concepts or LLM-based systems (preferred).
• Familiarity with JSON, APIs, and test automation frameworks.
• Exceptional analytical skills with strong attention to detail.
• Excellent communication skills and ability to work in Agile environments.

Desired Qualifications

• Experience with Salesforce Agentforce, Einstein, or similar AI agent platforms.
• Knowledge of prompt engineering, NLP, or training-data quality.
• Experience working within secure or regulated environments.

Success Measures

• High test coverage and low defect rates at release.
• Improved agent accuracy, performance, and overall user experience.
• Strong cross-team collaboration feedback.
• Demonstrable improvements to testing processes and automation.

Reference: AMC/JWA/AFDLR

Postcode: SW1

#jawa

• Now Hiring: Quality Control / Raw Materials Test Engineer

  Location: Huntingdon
  Salary: £14ph
  Contract Type: Ongoing
  Shift Pattern: Day shift 07.30-16.00

  About the role: We are seeking a detail-oriented and analytical Raw Materials Test Engineer to join our Quality and Materials Engineering team. In this role, you will be responsible for evaluating, testing, and validating incoming raw materials to ensure they meet company specifications, regulatory standards, and performance requirements. Your work will support product quality, supplier compliance, and continuous improvement initiatives across the manufacturing process.

  Key Responsibilities:

  • Perform laboratory testing and analysis of raw materials using approved test methods and procedures.
  • Verify that incoming materials meet technical specifications, quality standards, and regulatory requirements.
  • Investigate material non-conformances
  • Work closely with Quality Assurance, R&D, Procurement, and Production teams to resolve material-related issues.
  • Maintain accurate test records, documentation, and technical reports.
  • Support supplier qualification and audit activities related to material quality.
  • Ensure laboratory equipment is calibrated, maintained, and operated according to safety standards.
  • Contribute to continuous improvement initiatives for materials testing and quality control processes.

  Requirements

  • Experience in raw material testing, laboratory analysis, or quality engineering (preferred).
  • Familiarity with raw material tests - Melt Flow Index & Density, Tensile Testing, butt-fused joints and peel tests, Measuring pipe with micrometers and Pi Tapes, Impact Testing of pipes
  • Knowledge of quality systems and standards (e.g., ISO 9001, GMP, or industry-specific standards).
  • Experience with laboratory equipment, data analysis tools, and technical reporting.
  • Strong analytical, problem-solving, and attention-to-detail skills.
  • Ability to work collaboratively across cross-functional teams.

  Desirable Skills and Experience:

  • Experience with supplier quality management.
  • Knowledge of statistical analysis or quality tools (e.g., SPC, Six Sigma).
  • Experience working in a regulated manufacturing environment.

  Shifts:

  • Monday – Friday DAYS

  To Apply: If you feel you have the relevant experience then please apply online or submit your CV to , or if you wish to learn any more then please give me a call on 01480 436000 or 07811304455

  INDHUN

Lab validation analyst (GxP) - Dunboyne (Ireland) on site - contract - £450 per day

Exalto consulting are recruiting for a contract Lab validation analyst to work within laboratory systems in regulated (GxP) environments. This role is critical in ensuring lab systems meet regulatory requirements and perform reliably throughout their lifecycle.

Key Responsibilities:

• Lead and execute computer system validation (CSV) activities for lab instruments, software, and analytical platforms (e.g., CDS, LIMS, ELN, SDMS).
• Author, review, and approve validation deliverables (e.g., URS, FRS, RTM, IQ/OQ/PQ protocols, validation plans, and reports).
• Ensure compliance with GAMP 5, 21 CFR Part 11, EU Annex 11, and relevant data integrity standards.
• Support risk assessments and impact analyses for system changes and new implementations.
• Partner with QA and Lab/IT stakeholders to define validation strategy, timelines, and resource needs.
• Maintain the validated state of systems through periodic reviews, audit support, and change control.
• Provide guidance and training to system owners and users on validation processes and regulatory requirements.
• Participate in vendor audits and qualification efforts where required.

Required Qualifications:

• Bachelor’s degree in Life Sciences, Engineering, Computer Science, or related field.
• 3+ years of experience in a GxP-regulated lab environment performing system validation or CSV.
• Familiarity with lab informatics systems such as Waters Empower, Agilent OpenLab, LabVantage, MasterControl, etc.
• Solid knowledge of regulatory requirements including GAMP 5, 21 CFR Part 11, Annex 11, and ALCOA+ data integrity principles.
• Experience with documentation and testing tools such as HP ALM, ValGenesis, or similar.

If you have the above experience and are looking for a new contract role please send your CV for immediate consideration as my client are looking to hire ASAP
Lab validation analyst (GxP) - Dunboyne (Ireland) on site - contract - £450 per day

Role: TPM QA Lead

Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone’s chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive.

Location: London, 2-3 days per week

Duration: 12-month contract

Rate: .00

A leading global financial services organisation is looking for an experienced TPM QA Lead (Assistant Vice President level) to support the quality assurance of a Third-Party Management (TPM) platform within a large-scale technology and risk environment.

This is a hands-on QA leadership role where you will be responsible for ensuring quality across complex workflows, integrations, and regulatory-driven systems. You will work closely with product, engineering, vendor management teams, and external vendors to ensure solutions are thoroughly tested and delivered to a high standard.

What you’ll be doing:

• Creating and executing test plans, test cases, and regression packs
• Performing functional, regression, integration, workflow, UI and basic API testing
• Validating data flows, business rules, and system behaviour across complex workflows
• Managing defects, test cycles, and traceability using Jira and Xray
• Participating in requirements reviews and refining acceptance criteria with product teams
• Supporting UAT planning and execution
• Coordinating with external vendors, leading daily calls, and tracking delivery of fixes
• Ensuring consistent test coverage across system enhancements and regulatory requirements

What we’re looking for

• Strong hands-on QA experience in complex systems or enterprise platforms
• Solid understanding of QA methodologies, SDLC/STLC, and end-to-end testing processes
• Experience using Jira and Xray for defect and test management
• Ability to translate requirements into clear, testable scenarios
• Strong analytical and problem-solving skills with excellent attention to detail
• Experience validating data using SQL or data reconciliation techniques
• Comfortable working in Agile / Scrum environments
• Experience coordinating with vendors or external delivery teams

Candidates will ideally show evidence of the above in their CV to be considered please click the “apply” button.

We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.

Please be advised if you haven’t heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly.

MCS Group is delighted to be recruiting a Quality Engineer for our Lisburn based manufacturing client.

This position is immediately available and offered on a contract basis.

Our global client serves customers within the power and utilities industries worldwide with market leading and innovative technology solutions.

We’re looking for a hands-on, technically strong Quality Engineer to drive quality excellence across our clients manufacturing value streams in Lisburn.

In this role, you will:

In this pivotal role, you’ll ensure customer requirements are fully embedded and consistently delivered, while driving continuous improvement across Safety, Quality, Delivery, and Cost (SQDC) You will support quality engineering activities within products and processes to enhance performance and reduce the cost of poor quality.

Working cross-functionally with internal teams, suppliers, and customers, you’ll champion compliance, elevate customer experience, and help deliver true operational excellence.

The successful candidate will have:

• Technical/engineering Degree or equivalent experience gained in a Quality Engineering/Manufacturing role, with a good knowledge in applying problem solving, quality and lean tools/ techniques.
• Ability to interpret engineering drawings and specifications, along with an understanding of manufacturing processes.
• Excellent communication skills and problem solving skills, with proficiency with Microsoft Office suite.

To speak in absolute confidence about this opportunity please send an up to date CV via the link provided or contact Kirsty Dillon Specialist Consultant at MCS Group

Even if this position is not right for you, we may have others that are. Please visit MCS Group to view a wide selection of our current jobs

MCS Group is committed to Equality, Diversity, and Inclusion for all, being the first recruitment agency in NI to achieve Bronze Diversity Mark accreditation, if you have a disability which means you require a reasonable adjustment to be considered at any stage of the recruitment process, please contact us and we will endeavour to facilitate the request.

Not all agencies are the sameMCS Group are passionate about providing a first-class service to all our customers and have an independent review rating of 4.9 stars on Google

Skills:
Quality Engineer Engineer QA Quality Process Engineer

Junior Software Developer - Contract

Contract: 12 months +

Location: Wrexham, 4-5 Days Onsite

A great opportunity for a Software developer who enjoys low-code configuration , automation, and problem-solving. You’ll help configure and deploy a digital platform by managing updates, integrations, and reusable components that support reliable, scalable product delivery.

Most of the role is focused on JSON-driven configuration , testing, and quality-not heavy coding.

What You’ll Do:

Configure and deploy updates, scripts, and fixes

Manage automated application deployments

Upload and validate translations

Test and verify all updates

Complete required GxP documentation

Collaborate with global engineering teams

Tech Environment

Frontend: JavaScript, React Native

Backend: Java

Platforms: Web + Android/iOS (no SDK work)

Cloud: Azure (AWS experience a bonus)

Heavy use of JSON , Git, and configuration tool

What We’re Looking For

3+ years’ software development experience or relevant degree

Exposure to Java, JavaScript, or React Native (personal projects welcome)

Strong problem-solving and testing mindset

Good understanding of JSON

Familiar with Git branching and version control

Clear communication skills and good teamwork

Please apply for immediate consideration.

TPBN1_UKTJ

Lab Systems Validation Analyst
Location: Dunboyne, County Meath, Ireland (hybrid)
Contract: €520 per day
Start: ASAP
Duration: Initial contract until June 2026 with strong likelihood of extension

A global life sciences organisation is seeking an experienced Lab Systems Validation Analyst to support validation activities across laboratory systems within a regulated GxP environment.

Responsibilities:

Lead computer system validation (CSV) activities for laboratory systems and instruments
Produce and review validation documentation including URS, validation plans, IQ, OQ, PQ and reports
Ensure compliance with GAMP 5, 21 CFR Part 11, EU Annex 11 and data integrity standards
Support risk assessments, system changes and new system implementations
Work closely with QA, IT and laboratory teams to maintain validated systems

Experience Required:

3+ years experience in computer system validation within a GxP laboratory environment
Experience working with lab systems such as LIMS, ELN or CDS platforms
Strong knowledge of regulatory standards including GAMP 5 and 21 CFR Part 11
Experience producing validation documentation and executing test protocols

This is a contract opportunity to join a high profile programme supporting laboratory systems in a regulated pharmaceutical environment.

Job Title: UAT Tester (Payments)
Duration: 12 months (Potential for extension)
Working Pattern: Full Time

Location: London

About the Role:
Our client, a leading organisation in the finance sector, is seeking a detail-oriented and proactive UAT Tester with a focus on Payments. In this role, you will be responsible for conducting system User Acceptance Testing (UAT) for projects and enhancements, ensuring the integrity and functionality of payment systems prior to production deployment.

Key Responsibilities:

• Perform system UAT and regression testing to validate payment processes and enhancements.
• Engage with stakeholders to gather requirements and feedback on testing phases, ensuring all acceptance criteria are met.
• Identify, document, and escalate any defects or issues that arise during testing for timely resolution.
• Provide training on new processes and maintain comprehensive documentation of test results for change requests and audits.
• Collaborate closely with project managers, developers, and business users to foster effective communication and project alignment.
• Support the development of a Business as Usual (BAU) knowledge base to keep all users informed of changes and updates.

Qualifications & Skills:

• Proven experience in system UAT testing within the finance sector, specifically related to payment systems.
• Strong understanding of payment industry standards, including PSD2, ISO 20022, SEPA Messaging, and SWIFT payment formatting.
• Exceptional attention to detail and accuracy, ensuring that all defects are identified and addressed.
• Excellent communication and organisational skills, with the ability to manage multiple priorities effectively.
• Flexible and adaptable to changing tasks and deadlines, demonstrating a proactive approach to problem-solving.
• Experience in training facilitation and stakeholder engagement, with a focus on building strong working relationships.

Why Join Us?
This is an exciting opportunity to contribute to critical projects within the finance industry. You will play a vital role in ensuring the smooth operation and reliability of payment systems, while also gaining valuable experience in a dynamic environment. If you are a motivated individual with a keen eye for detail and a passion for payments, we want to hear from you!

Adecco is a disability-confident employer. It is important to us that we run an inclusive and accessible recruitment process to support candidates of all backgrounds and all abilities to apply. Adecco is committed to building a supportive environment for you to explore the next steps in your career. If you require reasonable adjustments at any stage, please let us know and we will be happy to support you.

We use generative AI tools to support our candidate screening process. This helps us ensure a fair, consistent, and efficient experience for all applicants. Rest assured, all final decisions are made by our hiring team, and your application will be reviewed with care and attention.

This role requires ACTIVE DV CLEARANCE. This is non-negotiable. It also requires 3 days p/w onsite in Reading with no flex.

This role is inside IR35 and up to £600 p/d

DESCRIPTION:
The Test Analystwill report to the Test Director, for a period of 9 months.
They will plan, prepare,Execute & Close test activities.

DELIVERY ACTIVITIES:

• SAP S/4Hana Experience
• Take requirementsand analysis material for scope items and create associated test scripts,including identifying data requirements
• Support thedetailed definition of the test acceptance criteria, working with the businessto ensure this is aligned to expectations
• Create test datato support execution
• Update existingtest scripts to reflect any changes to the solution impacting the test scope
• Execute testscripts in line with the test plan
• Record executionresults & capture evidence
• Raise defects asneeded
• Support testestimation activities
• Create defects inline with test execution activities and support defect resolution activities.
• Input to Risks,Assumptions, Dependencies & Issues

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found on our website.

Test Engineer - SC Cleared - 6-month Contract - Hybrid Working - Inside IR35

My customer is seeking an experienced SC Cleared Test Automation Engineer to play a key role within the testing function. The role involves working closely with business and product SMEs to translate critical functional business processes into automated test scenarios.

This Test Automation Engineer bring strong triangular testing, and automation experience to ensure that test evidence is clear, traceable, and aligned with the requirements for formal test phase sign-off.

Key Skills required from the Test Engineer:

• Actively SC Cleared
• Ability to Configure, Extend and maintain the Triangle Automation framework, project structure, and execution patterns.
• Experience building automated regression and UAT test suites (Including Dynamic test generation, and cross environment comparisons).
• Hands-on experience integrating automated suites into CI/CD pipelines (Using Azure DevOps, and GitHub Actions).
• Ability to deliver meaningful MI/reporting, Defect documentation (Defect, Risk/Issue, approaches, patterns and design decisions) write test execution evidence, traceable audit outputs, and Risk/Issue Documentation.
• Proficiency in managing, defining test data and baselines.
• Experience diagnosing and resolving automation failures, and distinguishing between test defects, data issues, and underlying platform defects.
• Contributing to Agile ceremonies and activities (includes Planning, Estimation, Reviews, and Retrospectives).

Required Skills for this Test Engineer:

• Hands-On experience with Triangle or similar Openlink specific test automation tools
• Expertise in Openlink/Findur - trade life cycle, EoD tasks, Custom logic (UDSR’s, reports, and user tables).
• Proven track record of designing and using mocks, stubs or simulators to replicate external systems and services (EG; Bloomberg, MarkitWire).
• Strong understanding of multi-system message flows and ability to automate integrations involving outbound/inbound messages (EG: via XML, JSON).
• Strong SQL/reporting skills and familiarity with API driven automation.
• Experience with BDD or structured scenarios writing practices is required
• Ability to conduct root cause analysis, and differentiate between test, data, environment, and platform issues.

This SC Cleared Test Automation Engineer is Hybrid, with scope for remote working.

Apply now to speak with VIQU IT in confidence. Or reach out to Louise Davies via the VIQU IT website.

QA Engineer Solar Construction
Fishburn, County Durham
£375 £400/day

We are supporting a major renewable energy contractor delivering a large ground-mounted solar PV project in the North East.

They are looking for a QA Engineer to support construction activities on site, ensuring installation works are delivered to specification and quality standards.

What you ll be doing

• Carry out quality inspections across solar installation works
• Ensure subcontractors follow ITPs, drawings and method statements
• Inspect mounting structures, module installation, DC cabling and inverter stations
• Raise and track NCRs and punch list items
• Maintain inspection records and QA documentation
• Support quality sign-off ahead of commissioning

What they re looking for

• QA/QC experience in renewables, power or electrical infrastructure
• Experience working with ITPs and inspection processes
• Comfortable working directly with site installation teams and subcontractors

Why this contract?

• Join a high-profile solar construction project
• Long-term contract with strong potential for extensions
• Work with an experienced delivery team on a fast-growing sector
• Immediate start available

You will be joining a highly regarded engineering organisation operating in a safety-critical, regulated environment where reliability genuinely matters. The systems you will be working on are used globally and demand absolute confidence in their performance, placing testing at the centre of the engineering function.

This is a contract role based primarily on site in South West London, where you will work within a collaborative systems engineering team. From the outset, you will immerse yourself in complex hardware and software systems, developing a deep understanding of how the full solution fits together and how it behaves in real-world conditions.

You will work closely with software, hardware and systems engineers to understand requirements, agree test scope and define effective validation strategies. As your product knowledge grows, you will take ownership of higher-risk and more complex areas of the system, leading test execution and ensuring delivery is on time and to specification.

In the lab environment, you will be trusted to work safely and independently, setting up test rigs, troubleshooting equipment issues and ensuring systems are ready for execution. You will analyse failures methodically, identify root causes across hardware and software boundaries, and provide clear, constructive feedback that drives product improvement. Your input will help strengthen test cases, improve test plans and refine overall testing processes.

You will also contribute to continuous improvement, identifying opportunities to enhance tools, environments and ways of working. As a more experienced engineer, you will naturally support others in the team, sharing knowledge, offering guidance and leading by example through your professionalism, focus and attention to detail.

This is a hands-on contract opportunity for a Systems Test Engineer who enjoys technical ownership, system-level thinking and working on products where quality and reliability are non-negotiable.

Key skills and experience required:

• Experience testing complex, safety-critical or regulated systems (e.g. marine, aerospace, automotive or similar)
• Strong understanding of hardware and software interaction at a system level
• Proficiency in manual and/or automated testing of integrated systems
• Experience applying structured and risk-based test methodologies
• Ability to analyse failures, identify root causes and drive corrective actions
• Experience writing and improving test plans, test cases and test scripts
• Familiarity with requirements management tools and test management tools
• Experience or working knowledge of Python
• Strong communication skills and the ability to work effectively in cross-functional engineering teams
• ISTQB or similar testing certification beneficial but not essential

Quality Engineer, Compliance

Location: Cambridge, UK (Hybrid 2.5 days per week onsite)

About the Role

Join the Biotherapeutics Pharmaceutical R&D Devices Centre of Excellence, where youll play a key role in ensuring quality and compliance for medical devices and combination products throughout their lifecycle. This position focuses on design control and risk management, supporting development programs from early design through to commercial launch. Youll work closely with cross-functional teams and external partners to maintain the highest standards of quality and regulatory compliance.

Key Responsibilities

• Lead design control and risk management activities for combination product development, ensuring all deliverables are accurate, approved, and audit ready.
• Facilitate risk management processes with external design and manufacturing partners.
• Ensure compliance with internal and external quality and regulatory standards (ISO 13485, ISO 14971, 21 CFR 820, EU MDR).
• Provide input into design validation activities, including Human Factors Engineering assessments.
• Assess external suppliers for quality system capability and compliance.
• Support investigations into device issues from clinical trials and commercial manufacturing.
• Contribute to regulatory submissions for assigned device projects.
• Assist with internal and external audits of the Device Centre of Excellence Quality Management System.

Education & Experience

• BSc/MSc/PhD in a relevant science or engineering discipline (e.g., Chemistry, Biology, Biomedical Sciences, Mechanical or Chemical Engineering).
• Minimum 2 years experience in pharmaceutical combination product and/or medical device industries.
• Proven experience in design controls and risk management for combination products.
• Familiarity with Human Factors Engineering and device assembly/manufacturing processes.
• Strong working knowledge of ISO 13485, ISO 14971, 21 CFR 820, 21 CFR 4, EU MDR.

Technical Skills

• Understanding of EN 62366, EN 60601, EN 62304 standards.
• Ability to apply established procedures consistently and accurately.
• Strong attention to detail, organizational skills, and ability to manage multiple priorities.
• Excellent communication and interpersonal skills; able to work collaboratively in cross-functional teams.
• Proficiency in MS Office and general computer applications.
• Knowledge of GMP principles.

Key Competencies

• Decisive: Synthesizes complex information to make informed decisions.
• Focused: Holds self and others accountable for delivering results.
• Connected: Builds strong relationships with internal and external stakeholders.
• Courageous: Demonstrates integrity and consistency between words and actions.
• Resilient: Adapts quickly to changing priorities and business needs.

Senior Quality Engineer - Internal Audits & Compliance

Renfrewshire | Up to 46,000 | 12-Month Fixed Term Contract (Maternity Cover)

Escape Recruitment is working with a well-established manufacturing organisation operating in a highly regulated environment to recruit a Senior Quality Engineer on a 12-month fixed term contract.

This role focuses heavily on internal quality audits, regulatory compliance, and quality management system training, supporting the business to maintain audit readiness and meet regulatory requirements.

candidates from Aerospace or Medical other regulated industries will be considered.

The Role

You will support the Quality Assurance team by managing internal audit programmes and ensuring compliance with regulatory standards and company procedures.

Key responsibilities include:

• Managing and coordinating the internal quality audit programme
• Preparing the site for external regulatory and corporate audits
• Leading audit preparation and managing responses to findings
• Supporting Quality Management System (QMS) processes
• Developing and delivering quality and compliance training
• Monitoring CAPA, NCR and corrective action activities
• Analysing quality data and supporting management review processes
• Supporting regulatory compliance across ISO frameworks

What We’re Looking For

• Experience working in a regulated manufacturing environment
• Background in Quality Engineering or Quality Assurance
• Experience with internal audits or external regulatory audits
• Knowledge of Quality Management Systems
• Auditor qualification or strong audit experience is desirable
• Strong analytical and problem-solving skills
• Degree in Science, Engineering or a related discipline preferred

The Opportunity

• 12-month fixed term contract
• Salary up to 46,000
• Opportunity to work within a highly regulated manufacturing environment
• Potential for other opportunities to arise during the contract period

This is an urgent requirement, and interviews will be arranged quickly.

To apply or learn more, please contact Charlie at Escape Recruitment.

This role requires ACTIVE DV CLEARANCE. This is non-negotiable. It also requires 3 days p/w onsite in Reading with no flex.

This role is inside IR35 and up to 600p/d/

DESCRIPTION:
The Test Analystwill report to the Test Director, for a period of 9 months.
They will plan, prepare,Execute & Close test activities.

DELIVERY ACTIVITIES:
Take requirementsand analysis material for scope items and create associated test scripts,including identifying data requirements
Support thedetailed definition of the test acceptance criteria, working with the businessto ensure this is aligned to expectations
Create test datato support execution
Update existingtest scripts to reflect any changes to the solution impacting the test scope
Execute testscripts in line with the test plan
Record executionresults & capture evidence
Raise defects asneeded
Support testestimation activities
Create defects inline with test execution activities and support defect resolution activities.
Input to Risks,Assumptions, Dependencies & Issues

Hays Specialist Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job you accept the T&C’s, Privacy Policy and Disclaimers which can be found at (url removed)

Business Analyst / QA (eInvoicing & Regulatory Change)

Cardiff (one day p/week ideally but this may be flexible) Mid-Level Multi-country Regulatory Rollouts

We re looking for a Business Analyst with strong QA coordination experience and hands-on exposure to eInvoicing and UBL-driven regulatory change.

This role sits across Finance, Compliance and IT, supporting multi-country eInvoicing mandates. You ll own gap analysis, data mapping and UAT coordination, ensuring regulatory requirements are translated cleanly into system changes and validated through structured testing.

What You ll Be Doing Regulatory Analysis & Gap Assessment

• Compare new country eInvoicing / UBL mandates against existing system configurations
• Perform structured gap analysis across processes, data and integrations
• Document clear, testable business requirements
• Maintain traceability from requirement through to test coverage and deployment

Data Mapping & Onboarding

• Own data mapping documentation (fields, transformations, dependencies)
• Align changes across internal systems and vendors
• Support onboarding readiness for new country rollouts

QA & UAT Coordination

• Define test approach and business-driven test scenarios
• Coordinate UAT execution and progress tracking
• Log, triage and manage defects through to resolution
• Validate production readiness and support post go-live checks

Stakeholder & Vendor Management

• Act as the link between Finance, Compliance, IT and third-party vendors
• Facilitate workshops and requirement reviews
• Manage delivery across multinational teams

What We re Ideally Looking For

• 5+ years Business Analysis experience
• Strong QA / UAT coordination background
• Proven exposure to eInvoicing, UBL or Peppol
• Experience supporting multi-country regulatory change
• Strong data mapping capability
• Comfortable operating across Agile and Waterfall environments
• Confident communicator in cross-functional settings

Profile Fit

This suits someone who:

• Is detail-focused but commercially aware
• Can move between business and technical conversations easily
• Has worked in compliance-led environments
• Enjoys structured delivery rather than purely strategic work

We understand this is a tricky role to try and find someone for. If this sounds at all like you please apply now for a confidential chat. thanks!

9 month contract

375 - 425 per day

Outside IR35

Midlands / Hybrid - 2-3 days a week in Midlands head office

Overview:

Akkodis are partnering with a highly reputable business based in the Midlands who are looking to hire an experienced Test Manager / Test Lead for an initial period of 9 months.

This is a hybrid role requiring 2-3 days a week in the Midlands head office.

Candidates must already be UK based (preferably Midlands) and have right to work in the UK. Sponsorship is not available.

Experience required:

• Proven experience working at Test Manager / Test Lead level.
• Must have experience of Power Platform and Dynamics CRM sales modules including customer care with multiple integrations and model driven apps.
• Must have strong stakeholder engagement and management to work alongside third party vendor.

Please apply ASAP to be considered.

Modis International Ltd acts as an employment agency for permanent recruitment and an employment business for the supply of temporary workers in the UK. Modis Europe Ltd provide a variety of international solutions that connect clients to the best talent in the world. For all positions based in Switzerland, Modis Europe Ltd works with its licensed Swiss partner Accurity GmbH to ensure that candidate applications are handled in accordance with Swiss law.

Both Modis International Ltd and Modis Europe Ltd are Equal Opportunities Employers.

By applying for this role your details will be submitted to Modis International Ltd and/ or Modis Europe Ltd. Our Candidate Privacy Information Statement which explains how we will use your information is available on the Modis website.